葡萄糖酸碳量子点的合成及其光学性能的研究

以葡萄糖酸为碳源,采用微波法、热解法和水热溶液法合成了水溶性较好的蓝色荧光碳量子点。用透射电镜(TEM)观察其形貌,荧光光谱(FL)和紫外可见光谱(UV)探究其激发和发射光谱,用时间分辨光谱(TRF)测其荧光寿命值。微波和热解法制备的碳量子点粒径在2.5~7.5 nm之间,激发波长为360 nm,发射波长为450 nm,荧光发射依赖激发波长,有三个荧光寿命,表面状态不均一。水热法制备的碳量子点,粒径在3.0~8.5 nm之间,激发波长为350 nm,发射波长为430 nm,荧光发射不依赖激发波长,只有一个荧光寿命值,表面状态均一。水热法合成的碳量子点荧光量子产率高为6.01%,为进一步研究葡萄糖酸制备碳量子点提供参考。     

银膜表面等离子体耦合辐射特性的仿真分析

表面等离子体耦合辐射(SPCE)是传统表面等离子体共振(SPR)的逆过程:当分子足够靠近金属薄膜表面时( < 200 nm),其受激辐射的能量可以耦合成SPR模式并定向辐射到棱镜中.由于具有场增强特性、高收集效率和优异的表面选择性, SPCE作为一种新的表面分析技术已经在荧光和拉曼光谱领域得到了有效的应用.本文采用光学互易定理简化传统SPCE的计算方法.通过计算,我们得到了SPCE一维和二维辐射功率密度分布,表面选择性,辐射角的波长色散特性,辐射角半峰宽与银膜厚度的关系.仿真结果与已报到的实验结果吻合良好,验证了该方法的有效性.     

一锅合成绿色到近红外发射的CdTe量子点

以3-巯基丙酸(MPA)为稳定剂,采用水相合成法制备了从绿色到近红外发射的CdTe量子点。系统研究了反应液pH值、镉和碲的物质的量之比及镉和3-巯基丙酸的物质的量之比等实验条件对CdTe量子点体系的发射波长和荧光量子产率的影响。在pH值为10.5,且nCd2+∶nTe2-∶nMPA=1∶0.05∶1.1的条件下,回流0.5 h,CdTe量子点体系在569 nm波长处的荧光量子产率达到30.8%;在7 h的回流时间内,制备的量子点的波长覆盖范围为525～730 nm。分别用X射线粉末衍射、透射电镜和红外光谱对CdTe量子点的晶体结构、形貌及表面基团进行表征。     

水溶性CdTe量子点的合成及其用于荧光猝灭法测定肌红蛋白

以3-巯基丙酸为稳定剂,合成了具有特殊光学性质的水溶性CdTe量子点,其最大发射波长位于544 nm.利用荧光光谱、紫外可见光谱及圆二色光谱法系统的研究了CdTe量子点与肌红蛋白(Mb)二者结合前后体系光谱的变化,从而证实了CdTe量子点与Mb之间静电结合反应的特征.在pH 7.0的PBS缓冲液中,用CdTe量子点作为荧光探针研究了肌红蛋白与量子点的相互作用,并基于肌红蛋白对CdTe量子点有显著的荧光猝灭作用,建立了肌红蛋白的快速检测方法.在最佳实验条件下,该体系荧光强度的猝灭程度(△F)与肌红蛋白质量浓度呈良好的线性关系,线性范围为0.3～24 μg/mL,检出限为0.13 μg/mL.该方法已对合成样品中肌红蛋白进行检测,并用于人体尿样中肌红蛋白的测定.     

(NH4)2MoS4引导CdTe QDs自组装及光学性质调控和细胞成像

报道了一种简易、快速调节量子点荧光波长的方法.以GSH为配体水热法合成了发射波长为540 nm左右的绿色荧光CdTe量子点,通过（NH₄）₂MoS₄在加热和常温条件下引导CdTe量子点进行自组装.加热条件下,15 min内可以使发射波长迅速的红移100 nm以上.常温条件下,在48 h内可以缓慢的引导CdTe量子点进行自组装,发射波长缓慢红移70 nm以上.利用对比实验验证了（NH₄）₂MoS₄中的MoS₄^2-对引导CdTe量子点自组装具有特异性,并且构建了一个合理的自组装体的结构单元模型.在细胞成像领域,该自组装体具有潜在的应用前景.     

半胱胺包被的碲化镉量子点的直接水相制备及其与DNA链接

用半胱胺作为表面修饰剂,在水相中制备了稳定的CdTe纳米量子点。吸收光谱和荧光光谱表明,所合成的CdTe量子点具有优异的发光特性。透射电子显微境(TEM)表征了纳米微粒的结构和粒径分布。与目前较为普遍的用巯基羧酸等其它稳定剂在水相中合成的CdTe量子点相比,半胱胺包被的CdTe量子点的前驱体不需要加热就能受激发出荧光,在100℃加热20min后,荧光明显增强;而巯基羧酸包被的CdTe量子点前驱体受激不能发光。本工作还利用量子点上包被的半胱胺上的氨基,实现了与单链DNA分子的直接链接,链接后溶液的发射峰位红移19nm,荧光强度增强。     

水热法快速合成绿色到近红外发光CdTe量子点

以3-巯基丙酸(MPA)和柠檬酸钠为稳定剂,Na2TeO3为碲源,利用水热法成功制备了从绿色到近红外发射的CdTe量子点,并详细探讨了影响CdTe量子点体系的荧光发射波长和量子产率的因素,如反应前驱液的pH值,反应物的浓度比和反应时间等实验条件.分别用X射线粉末衍射、透射电镜、紫外-可见光谱和荧光光谱对CdTe量子点进行了表征.     

CdTe/CdSe核壳量子点的合成及其在指纹显现中的应用

以CdCl2和Te粉为原料,在水相中合成了CdTe量子点核;通过外延生长在CdTe量子点核上包覆一层CdSe量子点,得到具有良好荧光性能的CdTe/CdSe核壳量子点;采用X射线衍射仪、透射电镜、高分辨透射电镜分析了不同反应条件下合成的CdTe/CdSe核壳量子点的晶体结构和微观结构,并对其进行了荧光光谱等测试和指纹显现分析.结果表明,合成的CdTe和CdTe/CdSe量子点粒径在3～5nm之间,粒径分布窄,水分散性良好;可以通过控制反应时间和Te/Se比等得到在500～700nm显示荧光发射峰的CdTe/CdSe核壳量子点.此外,核壳CdTe/CdSe量子点可以有效地和指纹物质结合,可应用于对铝合金油潜指纹的鉴别.     

CdTe量子点与罗丹明6G荧光共振能量转移体系的构建及机理研究

以巯基乙酸为修饰剂,水相合成不同尺寸的CdTe量子点(QDs),研究不同发射波长的CdTe QDs与罗丹明6G(R6G)之间的荧光共振能量转移(FRET)规律。结果发现,以发射波长为515nm的CdTe QDs为供体与R6G能量转移效率为58.5%,以R6G为供体与发射波长为605nm的CdTe QDs能量转移效率为49.4%,即在CdTe QDs-R6G的FRET体系中,量子点既可作为供体也可作为受体。在此基础上,构建了CdTe QDs(供体)-R6G(第一受体)-CdTe QDs(第二受体)的三元FRET体系,并研究了其双荧光共振能量转移的机理。     

CdTe量子点荧光光度法测定诺氟沙星的含量

在水溶液中合成了巯基乙酸修饰的CdTe量子点,基于铝敏化喹诺酮类抗生素,研究了诺氟沙星与CdTe量子点的荧光增敏作用,建立了用CdTe量子点作为荧光探针检测微量诺氟沙星的新方法。该体系的最大激发波长λex=365nm,最大发射波长λem=586nm。诺氟沙星溶液的浓度在9×10-3～2.4μg·mL-1范围内与体系荧光强度呈良好的线性关系,检出限为4.5×10-3μg·mL-1,相对标准偏差为0.9%。本方法灵敏度较高,选择性较好的,可用于药物中诺氟沙星含量的测定,结果较为满意。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.