α—苯偶酰二肟修饰碳湖电极的制备及对合成水样中铜的测定

报道了α－苯偶酰二肟修饰碳湖电极的制 及对合成水样中铜的测定,在ＰＨ４．１的Ｂ－Ｒ缓冲溶液中通过在－１．２０Ｖ电位下富集Ｃｕ＾２＋后,在－０．２￣＋０．２电位一范围内作阳极溶出伏安法测定。在＋０．０４８Ｖ处有一灵敏的氧化峰,峰电流与Ｃｕ＾２＋浓度在１×１０＾－７￣１×１０＾ｍｏｌ／Ｌ范围内成良好的线性关系,检出限为５×＾－８ｍｏｌ／Ｌ。     

甲壳素修饰碳糊电极测定痕量铜

报道了采用甲壳素修饰碳糊电极测定痕量铜的方法。通过开路富集，Ｃｕ６２＋和甲壳素形成络合物富集于电极表面，然后经介质交换，电位还原再进行阳熔出伏安测定。在浓度为３．０×１０＾－９－９．０×１２０＾－７ｍｏｌ／Ｌ范围内，峰电流与痕量铜浓度呈线性关系，检测限为１．０×１０＾－９ｍｏｌ／Ｌ。同时，对电极反应的机理进行了讨论。     

Cu(Ⅱ)KIO_4胭脂红-1,10-菲罗啉体系催化动力学光度法测定人发中痕量铜

基于ｐＨ６．５ 的Ｎａ２ＨＰＯ４ＮａＨ２ＰＯ４ 缓冲介质中铜离子对高碘酸钾氧化胭脂红褪色反应的催化作用,提出了催化动力学光度法测定痕量铜的新方法。研究了该方法的适宜反应条件,方法的检出限为１．１×１０－ ７ｇ／ＬＣｕ（Ⅱ）,表观摩尔系数ε＝ ７．８×１０５Ｌ·ｍ ｏｌ－ １·ｃｍ － １,线性范围为０～０．５μｇ／１０ｍ ＬＣｕ（Ⅱ）,方法已用于人发中痕量铜的测定     

含有吸附络合物溶液的倒数示波计时电位法的应用

Ｐｂ（Ⅱ）在０．２％乙二胺－５×１０＾－３ｍｏｌ·Ｌ＾－１ＨＯｘ－０．３ｍｏｌ·Ｌ＾－１ＫＯＨ溶液中，有良好的全数示波图，其峰电位Ｅｐ＝－１．０５（ｖｓ．ＳＣＥ），峰高与Ｐｂ＾２＋溶度在４．０×１０＾－７～２．０×１０＾－５ｍｏｌ·Ｌ＾－１内成正比，检测下限可达２．０×１０＾－７ｍｏｌ·Ｌ＾－１。本实验采用倒数示波计时电位法对铝合金“Ａ”中铅进行了测定，并直接通过示波图，对络合物的吸附属于性进行了     

鸟嘌呤—铜配合物在汞电极表面上的电吸附性的研究

在０．０２ｍｏｌ／Ｌ ＮａＨＣＯ３－０．０５ｍｏｌ／Ｌａ２ＳＯ４介质中、用极谱法和伏安法研究表明,铜－乌嘌呤配合物在汞电极表面上的吸附服从Ｌａｎｇｍｕｉｒ吸附,测得其饱和吸附量Γｍ＝１．１×１０＾－１０ｍｏｌ／ｃｍ＾２,吸附系数β＝４．７×１０＾４,吸咐自由能△Ｇ°＝－３６．６ｋＪ／ｍｏｌ。在８×１０＾－６ｍｏｌ／Ｌ Ｃｕ＾２＋离子存在下,可用示差脉冲阴极吸附溶出法测定８×１０＾－１０～１×１０＾     

新试剂（MSBTAMB）双波长光度法测定微量铜（II）的研究

研究了新试剂２－〔２＇－（６＇－甲磺酰－苯并噻唑）偶氮〕－５－二甲氨基苯甲酸（ＭＳＢＴＡＭＢ）与铜（Ⅱ）的显色反应。试验表明，在ｐＨ２．０￣５．１和４０％乙醇介质中，Ｃｕ（Ⅱ）与ＭＳＢＴＡＭＢ形成１＋１稳定的配合物，其最大吸收波长为６４２ｎｍ，用单波长法测得配合物的Σ６４２＝６．７４×１０＾４Ｌ·ｍｏｌ＾－１·ｃｍ＾－１，双波长法测得的Σ６４２．５４６＝１．０９×１０＾５Ｌ·ｍｏｌ＾－１·ｃｍ＾－     

一种基于形成杂多核络合物的荧光增敏效应的研究：Ⅲ.锰（Ⅱ）,钴（…

本研究了Ｍｎ＾２＋和Ｃｏ＾２＋对７－（８－羟基－３，６－二磺基萘偶氮）－８－羟基喹啉－５－磺酸－硼砂反应体系的混合荧光增敏作用。实验条件下，荧光增敏强度满足线性加和关系的范围是：Ｍｎ＾２＋浓度０￣２．９×１０＾－７ｍｏｌ／Ｌ；Ｃｏ＾２＋浓度０￣８．８～１０＾－７ｍｏｌ／Ｌ；总浓度不超过１．０×１０＾－６ｍｏｌ／Ｌ。检出限量为Ｍｎ＾２＋４．５×１０＾－９ｍｏｌ／Ｌ和Ｃｏ＾２＋１．４×１０＾－８ｍｏ     

镉—溴化物—罗丹明B高灵敏显色反应的研究：离心光度法测定镉

本研究了一个高灵敏的测定镉的方法，离心光度法，该体系络合物λｍａｘ＝５６０ｎｍ，表观摩尔吸系数ε５６０＝５．０６×１０＾８Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，Ｃｄ＾２＋浓度０．１０×１０＾－２－１．０×１０＾－２μｇ／１０ｍＬ呈线性关系，本法已用于血清和水中痕量镉的测定，探讨了高灵敏的显色反应机理。     

新试剂N—壬基—N′—（氨基对苯磺酸钠）硫脲（NPT）与Cu^2＋ …

通过对新合成的显色剂Ｎ－壬基－Ｎ′－（氨基对苯磺酸钠）硫脲与Ｃｕ＾２＋显色反应的研究,确定了光度测定铜,在ｐＨ６．２￣７．０的ＫＨ２ＰＯ４＾－Ｎａ２Ｂ４Ｏ７缓冲溶液中,Ｃｕ＾２＋和ＮＰＴ形成１：３的水溶性配合物,最大吸收波长为３４３．２ｎｍ,表观摩尔吸光系数ε３４３．２＝４．８７×１０＾４Ｌ·ｍｏｌ＾－１·ｃｍ＾－１。Ｃｕ＾２＋含量在２￣５５·ｇ／２５ｍｌ范围内符合比耳定律,相关系数０．９９９９。     

催化动力学垂直光路光度法测定痕量铜

建立了痕量铜的催化动力学垂直光路光度测定法，铜含量在０～３．０ｎｇ／２５０μｌ范围内符合比耳定律，工作曲线的回归方程为：△Ａ＝０．５３４Ｃ（ｃｕ＾２＋，ｎｇ），＋０．０１８（ｒ＝０．９９９９），检出限为１．５×１０＾－１１ｇ．ｍｌ＾－１（△Ａ＝０．０２，ｔ＝２ｍｉｎ）由曲线斜率法求得的表观摩尔吸光系数为１．２×１０＾７，方法用于氮三乙酸及标准水样中铜的测定，加标回收率在９２％～９８％，相对标准偏差     

Selective kinetic fluorimetric determination of copper at the ng ml level

A kinetic fluorimetric method for copper, based on a previously described system with 1,1,3-tricyano-2-amino-1-propene as reagent, has been developed. It has been shown that the determination is based on copper-catalysed oxidation of the reagent rather than on complex formation with it, although complex-formation with imidazole seems needed to stabilize the copper(I) that is thought to be the catalyst. The application of several kinetic methods (tangent, fixed-time and variable-time) allows determination of very low concentrations of copper (1-35 ng ml ) with a sensitivity about 100 times that of an earlier method. Of 47 ions tested, only EDTA interfered when present at the same concentration as copper. The method has been applied to the determination of copper in blood serum samples.     

Selective kinetic spectrophotometric determination of copper at nanograms per milliliter level

A sensitive and selective kinetic method is proposed for the determination of nanogram amounts of copper. The method is based on the catalytic effect of copper on the reduction of Ponceau S by sodium sulfide in an alkaline media. The rate of the reaction is monitored spectrophotometrically at 560 nm. The method allows determination of copper concentrations in the range 2-400 ng ml(-1) with a relative standard deviation of approximately 2%. The proposed method, which is highly selective to copper, has been applied satisfactory to its determination in real samples.     

Determination of trace amounts of copper with 4-(2-pyridylazo)resorcinol by solid phase spectrophotometry

A determination method for traces of copper by Solid-Phase Spectrophotometry (SPS) has been developed. It is based on the fixation of copper(II) as 4-(2-pyridylazo)resorcinol complex on a styrene-divinylbenzene anion-exchange resin. The resin phase absorbances at 525 and 800 nm are measured directly, and the determination of copper (with a RSD of 1.8%) is possible in the range of 0.3–4.5 μg L^?1. The method has been applied to the determination of copper in different samples, i.e. mushrooms, tea, drugs and waters.     

Dosage colorimétrique du cuivre dans les aciers par l'acide rubéanique

The rapid colorimetric determination of copper has been studied by means of the coloured reactions of copper salts with dithio-oxamide or rubeanic acid. This method can be used for the determination of copper, contained in an impure state in steels, in the presence of iron and some alloy elements without first extracting in an acetic buffer medium, the iron being made complex by citric acid. The method can equally be applied to the determination of small quantities of copper in different metals and alloys. The accuracy obtained is about ± 2.5 % of the quantity of copper.     

Application of multiwalled carbon nanotubes as solid phase extraction sorbent for preconcentration of trace copper in water samples

The adsorption behavior of multiwalled carbon nanotubes (MWNTs) toward copper has been investigated systemically, and a new method has been developed for the determination of trace copper in water samples based on preconcentration with a microcolumn packed with MWNTs prior to its determination by flame atomic absorption spectrometry. The optimum experimental parameters for preconcentration of copper, such as pH of the sample, sample flow rate and volume, elution solution and interfering ions, have been investigated. Copper can be quantitatively retained by MWNTs in the pH range 5-8, and then eluted completely with 0.5 M HNO3. The detection limit of this method for Cu was 0.42 ng/mL, and the RSD was 3.5% at the 10 ng/mL Cu level. The method was validated using a certified reference material, and has been successfully applied for the determination of trace copper in water samples.     

河水中痕量铜的形态分析研究

采用离子交换树脂分离／分光光度法研究了铜的形态分离分析条件，提出了铜的形态分析方法。用此法测定了珠江水中痕量铜的总量、悬浮态、溶解态、阴离子态、阳离子态、非离子态及其形态分布，结果令人满意。     

微波消解-电感耦合等离子体发射光谱测定铜精矿中的银

铜精矿试样利用HCl和HNO3混酸于微波消解仪中进行溶解,电感耦合等离子体发射光谱(ICP-OES)法测定铜精矿中的银含量。试验了不同比例消解体系的消解效果,研究了不同浓度铁、铜基体的影响,结果表明王水体系消解效果最佳,1 000mg/L以下的铁、铜或铁、铜的混合基体对银的测定没有影响,10%HCl体系作为测定酸度。该方法对银的线性范围为0.73~1 500g/t,标准物质测定值与标准值无显著性差异。该方法前处理试剂消耗少、速度快,分析浓度范围宽,可用于铜精矿中银的快速测定。     

溶剂浮选光度法测定痕量铜

提出了利用溶剂浮选富集ＤＤＴＣ－Ｃｕ（Ⅱ）体系测定水样中痕量铜的方法（ＤＤＴＣ为二乙胺二硫代甲酸钠）。质量浓度的检出限为０．０５ｎｇ·ｍＬ＾－１,线性范围为０．０￣６．０ｎｇ·ｍＬ＾－１,测定含Ｃｕ（Ⅱ）４．０ｎｇ·ｍＬ＾－１的样品,相对标准偏差为０．８５％,已用于天然水中Ｃｕ（Ⅱ）的测定。     

Simultaneous third-derivative spectrophotometric determination of copper and nickel in iron alloys and aluminium alloy

A method is proposed for the simultaneous determination of copper and nickel by third-derivative spectrophotometry based on the absorption spectra of their complexes with cyanide ion in the ultraviolet range. The method allows the determination of 0.55-5.8 mug/ml of copper and 0.55-6.8 mug/ml of nickel. The relative standard deviation for 11 determinations of 1.5 mul/ml of copper and nickel were 0.78 and 0.72%, respectively. The detection limits were 0.10,mug/ml for nickel and 0.13 mug/ml for copper. The method has been applied to direct determination of copper and nickel in iron alloys and an aluminium alloy without any separation.     

铜(Ⅱ)催化PHA的褪色反应特性及应用

本文研究了铜(Ⅱ)催化抗坏血酸还原多卤代变色酸双偶氮胂类试剂(PHA)的褪色反应特性, 讨论了试剂结构对褪色反应动力学特性的影响, 探讨了反应机机。以三氯偶氮胂为代表, 拟定了测定痕量铜(Ⅱ)的新方法, 其检出限为3.06×10^-^1^2g/mL, 线性范围为0~28ng/10mL。用于生物材料中痕量铜(Ⅱ)的测定, 结果满意。