由乙氧基铅配合物制备纳米PbO

Lead complex was directly synthesized by electrochemical dissolution of lead in a cell without separating the cathode and anode. The product was characterized by FTIR, Raman spectra and ¹H NMR. The xerogel was prepared by a direct sol-gel of the electrolyte solution and then dryness of it. The xerogel was heated at 450 ℃ for 2 h to obtain the nano-PbO powder. FTIR, XRD, and TEM were used to investigate the structure of nano-PbO. The results show that the lead complex is Pb(OEt)₂(acac)₂, which contains acac- group and could prevent the precursor from hydrolysis and sintering during the calcinations process. The nano-PbO of 20～30 nm was thus obtained in a high purity by drying at 450 ℃.     

Catalytic performances of kaoline and silica alumina in the thermal degradation of polypropylene

Polypropylene was cracked thermally and catalytically in the presence of kaoline and silica alumina in a semi batch reactor in the temperature range 400℃～550℃ in order to obtain suitable liquid fuels.The dependencies between process temperatures,types of catalyst,feed compositions and product yields of the obtained fuel fractions were found.It was observed that up to 450℃ thermal cracking temperature,the major product of pyrolysis was liquid oil and the major product at other higher temperatures(475℃～550℃) ...     

Influence of preparation conditions on properties of chemical modified nylon affinity membrane (used for γ-globulin adsorption)

Microporous polyamide membrane (Nylon 6, PA) was modified by add hydrolysis and then coupled with hydroxyethyl cellulose (HEC) to amplify reactive groups and reduce nonspecific interaction with proteins. 1,6-Diaminohexane (DAH) as space arm and phenylalanine (Phe) as ligand were immobilized onto nylon membrane through the activation of s-triazine trichloride (CyCl3). The affinity membrane obtained can be used to adsorb γ-globulin specifically. The optimum conditions of preparing affinity membrane and adsorbing bovine γ-globulin were studied.     

Synthesis of High-purity Fe2AlB2 and the Effect as Sintering Additive for ZrB2

Fe₂AlB₂ powder material was prepared by the direct reaction of iron,aluminum and boron powders in a tubular furnace.The effects of different Al contents,temperature and raw material pretreatment on the purity of product were studied.The mixed powder with the stoichiometric ratio of 1.5Al/2Fe/2B was processed by CIP (Cold Isostatic Pressing),and then calcined at 1150℃ for 120 min.The product containing a small amount of impurities is treated with alkaline solution to obtain high-purity Fe₂Al B₂ powder.Zr B₂-Fe₂Al B₂ composite ceramic was successfully prepared at 1250℃ by hot pressing sintering.The density,hardness and fracture toughness were 96.2%,22±0.3 GPa and 5.78±0.5 MPa·m^1/2,respectively.     

A SPIN LABELING STUDY OF PIG CARDIAC TROPOMYOSIN

Tropomyosin (TM) extracted from pig cardiac muscle was spin-labeled with 2,2,6,6-tetramethyl-4-(dichlorotriazin)-aminopiperidine-1-oxyl. The ESR spectra of the product (SL-TM) were of a type of weak immobilization. Effects of three means for the denaturation were observed on the above spectra. The ESR spectrum obtained for SL-TMafter enzymatic degradation was found to be analogous to that for the label itself in a dilute solution and thereby the quantity of labels bound in SL-TM estimated. The Arrhenius plots attained through variable temperature measurement for SL-TM's exhibited two inflexion points (the conformational transition temperatures for TM) around 45℃ and 74-75℃, the latter temperature having not been reported in literature so far. However, the enzymatic degradation product from SL-TM behaved quite differently from it in the response to microwave power saturation and temperature variation.     

Utilization of α-olefins obtained by pyrolysis of waste high density polyethylene to synthesize α-olefin-succinic-anhydride based cold flow improvers

A new route of utilization of α-olefin rich hydrocarbon fractions obtained by waste polymer pyrolysis was investigated. α-olefin-succinic-anhydride intermediate-based pour point depressant additives for diesel fuel were synthesized, in which reactions needed α-olefins were obtained by pyrolysis of waste high-density polyethylene (HDPE). Fraction of α-olefins was produced by the de-polymerization of plastic waste in a tube reactor at 500℃ in the absence of catalysts and air. C17～22 range of mixtures of olefins and paraffins were separated for synthesis and then, these hydrocarbons were reacted with maleic-anhydride (MA) for formation of α-olefin-succinic-anhydride intermediates. The olefin-rich hydrocarbon fraction contained approximately 60% of olefins, including 90%～95% α-olefins. Other intermediates were produced in the same way by using commercial C20 α-olefin instead of C17～22 olefin mixture. The two different experimental intermediates with number average molecular weights of 1850g/mol and 1760g/mol were reacted with different alcohols: 1-butanol, 1-hexanol, 1-octanol, i-butanol, and c-hexanol to produce their ester derivatives. The synthesized ten experimental pour point depressants were added in different concentrations to conventional diesel fuel, which had no other additive content before. The structure and efficiency of experimental additives were followed by different standardized and non-standardized methods. Results showed that the experimental additives on the basis of the product of waste pyrolysis were able to decrease not only the pour but also the cloud point and cold filter plugging point (CFPP) of diesel fuel, whose effects could be observed even if the concentration of additives was low. Furthermore, all additives had anti-wear and anti-friction effects in diesel fuel.     

尿素与间甲酚共晶法分离间/对甲酚

Urea was dissolved into mixture of m/p-cresol(m/p = 59.1/40.9) upon heating to 80℃. The resulting solution was cooled spontaneously to 40℃, then further to a designated temperature in an even speed with stirring with even dropping of toluene. Co-crystal of urea and m-cresol was thus formed as white precipitate, which was then isolated by filution. Pure m-cresol was obtained by distillation of oil layer that was the upper layer of hydmlyzed decomposition of filtrating cake. Effects of solvent, material ratio, temperature on the yield and the purity were investigated, m-Cresol with purity of 99.0% and yield of 73.9 % is obtained at an optimized condition at urea/(m/p)-cresol = 23g/50ml,final temperature = - 15℃ ,time = 110min, and dropping of 150ml toluene.The existence of co-crystal of urea and m-cresol was verified by IR spectroscopy. The product purity was assayed by GC.     

Expression of CTB-human Insulin(BA) Fusion Protein in Gynostemma Pentapyhllum Makino Callus Cells and Its Hypoglycemic Effect in Mice

The plant expression vector of choleratoxin B subunit(CTB)-human insulin(BA) fusion protein pBI121/(CTB-BA) was constructed first and then the Gynostemma Pentapyhllum Makino callus cell line that could express CTB-human insulin fusion protein was constructed and its hypoglycemic effect was evaluated in mice. The plant expression vector pBI121/(CTB-BA) was digested with both BamI and SacI. Agrobacterium tumerfaciens strain LBA4404 was transformed with previously constructed recombinant plasmid pBI121/(CTB-BA) via the freeze tha-wing method, then CTB-BA gene was integrated to G Pentapyhllum Makino callus cells by co-culturing the cells with the transformed LBA4404 strain. The transformed G Pentapyhllum Makino callus cells were identified by DNA se-quence assey and RT-PCR. The expressed product was identified by western-blot and its amount was tested by ELISA kit and its blood sugar decreasing effect was tested in mice.The sequences of synthetic CTB and human insulin genes(BA) were completely identical to those designed. Restriction map proved that the length of gene fragment in-serted into expression vector pBI121 was consistent with that expected. The sequence of genomic DNA of expressed product was completely identical to that designed. The result of RT-PCR was consistent with that expected. The ex-pressed product showed a specific band with a relative molecular mass of 17000 by Western-blot. The human insulin expression amount was 6.03 μIU/mL according to the ELISA result.The animal test showed that only the G Penta-pyhllum Makino callus cell line itself showed activity in decreasing the blood sugar of mice, however, the activity of the transformed G Pentapyhllum Makino callus cells was much higher. The plant expression vector pBI121/(CTB-BA) was constructed and expressed in the G Pentapyhllum Makino callus cells successfully for the first time. The trans-formed G Pentapyhllum Makino callus cells showed high activity in decreasing the blood sugar of mice. This study developed a new way for the development of oral administration insulin.     

改进的方法用于制备键合型纤维素－三（苯基氨基甲酸酯）手性固定相

The classical method for preparation of covalently boned cellulose derivative chiral stationary phases (CSP) with diisocyanate as spacer was improved. Diisocyanate was firstly allowed to react with 3-aminopropyltriethoxysilane, and the resulting product was then applied as the spacer reagent to immobilize cellulose derivatives onto silica gel. Influences of the amount and the length of the spacer on the optical resolution ability of the CSP were investigated. Comparing improved procedure to classical diisocyanate method, the cross-linking between the glucose units of the cellulose derivatives was avoided to the most extent. With the improved procedure, regio-nonselective ways could be adooted to prepare covalently bonded CSP, which showed an advantage for the rapid preparation.     

NEW FLUOROSILOXANE AS A COATING MATERIAL FOR NERVE AGENT SENSORS

Polymer coated quartz crystal microbalance （QCM） sensor based on the frequency shifts due to the adsorption of compounds at the surface of modified quartz crystal electrode is an effective method for detection of sarin （GB） which is a highly toxic nerve warfare agent. A new fluorosiloxane polymer has been synthesized through 6 steps from trifluoromethyl benzene. The synthesis was achieved from trifluoromethyl benzene through nitration, hydrogenation. The obtained m-nitrotrifluoromethyl aniline was treated with NANO2, and then hydrolyzed to m-nitrotrifluoromethyl phenol, m-nitrotrifluoromethyl phenol was reacted with allyl bromide to the ether product. The product was rearranged by Claisen rearrangement, and then reacted with polymethylhydrosiloxane under catalyst of Pt/DVTMS. The fluorosiloxane polymer can be obtained. The polymer has been successfully used as QCM coating material     

2-氯-1,3,2-二氧磷杂环戊烷的合成

合成了重要的有机中间体2 氯 1,3,2 二氧磷杂环戊烷.利用正交设计方法研究了反应温度、原料摩尔比、乙二醇滴加时间对反应收率的影响.实验结果表明:三氯化磷与乙二醇的最佳摩尔比为1.1∶1、最佳反应温度为4～6℃、加料时间为60～80min时,收率最高达到84.8%,远高于文献的报道(<70%).用元素分析和1HNMR表征了产物结构.     

2,8-二氨基-10-羟基-5-甲基-5,10-二氢磷杂吖嗪-10-氧化物的合成及其诱变性研究

在升温条件下,二苯胺和三氯化磷反应,产物经水解、氧化得次膦酸:10-羟基-5,10-二氢磷杂吖嗪-10-氧化物(产率45%).经酰化后,与甲醇钠作用,生成相应的次膦酸甲酯.次膦酸甲酯经NaH处理后,在120℃下发生甲基迁移,形成5-甲基次膦酸(产率62%).用45倍摩尔量的硝化剂将5-甲基次膦酸硝化,得到双硝基产物(产率59%).在5%Pd/C催化下,双硝基产物又被氢气还原.考察催化剂用量对该还原反应的影响,并在最佳催化剂用量时得到2,8-二氨基-10-羟基-5-甲基-5,10-二氢磷杂吖嗪-10-氧化物(产率70%).用NMR,IR和质谱确定了所合成的5个中间体结构.对合成的氨基化合物进行Salmonella/mam-malianmicrosomeassay测试,结果表明,该氨基化合物表现为非诱变性.     

酞菁氯化铟的固相合成及光敏性能

以尿素、邻苯二甲酸酐、钼酸铵和四水合三氯化铟为原料, 乙酸钠为催化剂, 采用固相法合成酞菁氯化铟, 并用元素分析、UV-Vis、IR和XRD进行了表征. 考察了反应物配比、催化剂、反应温度和时间对产率的影响, 寻找出最佳制备条件为n(尿素)∶n(邻苯二甲酸酐)∶n(三氯化铟)=14∶4.5∶1, 以乙酸钠为催化剂, 130 ℃下恒温0.5 h, 在220 ℃下反应4 h后, 用88％(质量分数)浓硫酸提纯. 研究了酞菁氯化铟光敏电阻薄膜的光敏性能, 结果表明, 当用0.2 g酞菁氯化铟和0.6 g PVB制备光敏电阻薄膜时, 分散介质丁酮-环己酮的最佳用量为36 mL, 其电阻灵敏度保持在1.50×10⁸以上, 积分灵敏度保持在30 μA/(lx·V)以上. 研究结果表明, 酞菁氯化铟光敏电阻薄膜具有很好的光敏性能.     

苝红化合物氧化还原反应的研究

苝红化合物作为一种新型功能性染料,由于吸收光能在可见范围,且性能稳定,在光导液晶及太阳能电池等方面已得到了应用^[1].     

阻燃中间体3,9-二氯-2,4,8,10-四氧代-3,9-二磷杂螺[5.5]十一烷的合成

以PCl3和季戊四醇为原料合成了中间体3,9$C二氯-2,4,8,10$C四氧代-3,9-二磷杂螺[5.5]十一烷,产率达99.6%.对反应条件进行了优化,最佳反应条件为:PCl3和季戊四醇摩尔比为2.5∶1,反应温度80℃,反应时间1.5h.     

工业色谱法分离制备7-木糖基-10-去乙酰紫杉醇酶解产物10-去乙酰紫杉醇

基于工业色谱法分离制备抗癌药物紫杉醇的半合成前体10-去乙酰紫杉醇(10-DAP)。7-木糖基-10-去乙酰紫杉醇(10-DAXP)在我国特有红豆杉品系(中华红豆杉)枝叶中含量丰富,以其为原料可制备紫杉醇最理想的半合成前体——10-DAP。本研究以部分纯化后的7-木糖基-10-去乙酰紫杉烷为原料,通过β-木糖苷酶水解该粗提物中的主要成分10-DAXP及其两个微量类似物7-木糖基-10-去乙酰三尖杉宁碱(10-DAXC)和7-木糖基-10-去乙酰紫杉醇C(10-DAXP C),脱去其C-7位上的木糖基,水解产物采用大孔吸附树脂吸附,正相快速柱分离和反相制备色谱分离,可获得高纯度的目标物10-DAP,产物纯度为96%,整个工艺的收率大于75%。该方法适合以10-DAXP为原料大规模制备紫杉醇的半合成前体化合物10-DAP,为工业化生产紫杉醇开辟了一条新途径。     

1,1,1-三氟-2-甲基-2-丙醇合成工艺研究

以氯甲烷(2)为原料制备甲基氯化镁格氏试剂;以三氯化镓为催化剂,甲基氯化镁与1,1,1-三氟丙酮(3)反应,经水解制得1,1,1-三氟-2-甲基-2-丙醇(1).产物结构经1 H-NMR、13 C-NMR、19 F-NMR及MS表征;通过单因素、正交实验和放大重复性实验确定了最佳反应条件:溶剂为正丁醚、格氏试剂浓度3 ...     

电化学方法制备纳米NiO及反应机理初探

采用电化学法一步制备了镍醇盐配合物Ni(OEt) 2 (acac) 2 (acac为乙酰丙酮基 ) ,并以其作为前驱体 ,控制一定水解条件制得胶体 ,分别在 4 5 0℃ ,60 0℃煅烧均得到具有立方晶型的纳米NiO粉体 .通过红外光谱 (FT_IR)、核磁共振 (1HNMR)、拉曼光谱 (Ramanspectrum)、X_射线粉末衍射 (XRD)、透射电子显微镜 (TEM)等手段对前驱体和NiO粉体进行了表征 .结果表明 ,电解合成的最佳温度为 30～ 4 0℃ ,不溶性镍醇盐配合物升温到 4 0～ 5 0℃即可溶解 .电解法制备得到的纳米NiO层呈球形单分散结构 ,粒径在 10～ 15nm左右 .本文同时讨论了电合成纳米NiO的反应机理     

氢还原重量法测定三氯化钌产品中钌的含量

建立了氢还原重量法测定三氯化钌产品大样中钌含量的新方法,研究并优化了测定条件,结合原子吸收光谱法(AAS)、电感耦合等离子体原子发射光谱法(ICP-AES)和氯化铵纯度考察了杂质元素对了分析结果的误差影响。结果表明,钌含量为0.3~0.6g的三氯化钌与5~7g氯化铵能完全形成(NH4)2RuCl6配合物,于约100℃烘干水分、350℃分解铵盐、750℃氢还原为海绵钌和105℃干燥水气的条件下,测定3.94%,5.88%,7.32%,9.47%,10.84%和12.93%含量的钌,极差、标准偏差(S)、相对标准偏差(RSD,n=22)和重复性限(r)分别为±0.01%,0.0030%~0.0050%,0.0369%~0.0761%和0.008%~0.014%。样品加标回收率99.96%~99.98%。方法的结果准确,精密度好,且与YS/T562—2009标准分析方法的吻合。