共混方法对聚氯乙烯/聚丙撑碳酸酯相容性影响

本文分别用溶液法和熔融法制得聚氯乙烯（PVC）与聚丙撑碳酸酯（PPC）共混试样，用DSC证明PVC／PPC共混物不相容，但它们不相容的程度受分子量、共混比例等因素的影响，并根据玻璃化转变温度（Tg）计算出溶液共混试样PPC富相中PVC的重量百分含量。NBR／PPC弹性体作偶联剂对PVC／PPC共混体系具有较好的增容作用，共混物中PPC的用量及分子量对共混体系性能有一定的影响。     

弹性体偶联剂结构对PVC/PPC性能的影响

NBR－PPC弹性体偶联剂能促进PPC（聚丙撑碳酸酯）与PVC（聚氯乙烯）之间的相容性，改善共混物的力学性能，并在共混体系中产生轻度交联。偶联剂组成在NBR／PPC比例为70／30，NBR（丁腈橡胶）含腈量为34％，BPO过氧化苯甲酸用量为2．5份时，共混物的综合力学性能最佳，但偶联剂预先硫化时间不宜过长．     

PPC/NBR弹性体结构和性能研究

本文研究了聚丙撑碳酸酯(PPC)/丁腈橡胶(NBR)弹性体形态结构、动态力学性能、力学性能、耐油、耐热氧老化以及耐化学介质稳定性。发现PPC/NBR弹性体呈现互相贯穿的聚合物网络(IPN)的结构特征。PPC存在使NBR扯断强力,扯断伸长率大幅度提高,PPC/NBR弹性体具有优良的耐油及耐热氧化老稳定性。     

PPC／NBR弹性体的结构与性能

本文研究了聚丙撑碳酸酯(PPC)/丁腈橡胶(NBR)弹性体结构形态、动态力学性能、力学性能、耐油、耐热氧老化及耐化学介质稳定性。发现PPC/NBR弹性体呈现IPN结构特征,加入PPC使NBR拉伸强度、扯断伸长率大幅度提高。PPC/NBR弹陸体具有优良的耐油及耐热氧老化稳定性。     

Thermal,Mechanical and Rheological Properties of Eco-friendly Poly（propylene carbonate）/Poly（1,2-propylene succinate） Blends

In order to improve the flexibility of poly（propylene carbonate） （PPC）, poly（1,2-propylene succinate） （PPSu） was used to plasticize PPC in a batch mixer. The effects of PPSu on the miscibility, thermal stability, mechanical and theological properties of the blends were investigated. PPC was partially miscible with PPSu. It was demonstrated that PPSu decreased the glass transition temperature and melt viscosity of PPC, as shown in the DSC and rheological curves. With the increase in PPSu content, the PPC/PPSu blends showed decreased tensile strength, however, the elongation at break was increased to 1100% for the 70/30 PPC/PPSu blend. The introduction of PPSu provided an efficient and novel plasticization method to extend the application area of PPC.     

二氧化碳三元共聚物催化合成的研究进展

讨论在聚甲基乙撑碳酸酯（PPC）主链中引入第三单体改善聚合物的性能,并对引入不同第三单体的反应机理、结构、性能以及应用进行讨论。     

CO_2共聚物为基的新型聚氨酯弹性体的合成与性能

本文报道一类以ＣＯ＿２共聚物为基的新型聚碳酸亚丙酯聚氨酯（ＰＰＣＰＵ）弹性体。探讨了这类弹性体的最佳台成方法．讨论了不同配比，不同的扩链交联剂对弹性体的力学性能的影响。研究了弹性体的热性能及耐水性与不同配比的依赖关系。发现控制适当的配比．能获得耐水住能和耐热性能良好的弹性体。     

聚氯乙烯／热塑性弹性体共混增韧的研究进展

聚氯乙烯（PVC）是一种性能优良,价格低廉的通用树脂,但其脆性大、热稳定性差、加工性能不佳等,需要进行改性。通过用热塑性弹性体（TPE）对PVC进行共混增韧改性,可得到高性能的PVC复合材料。共混改性为PVC增韧改性的最简单易行的有效方法。本文概述了聚氯乙烯／热塑性弹性体共混体系的种类和制备方法,同时对影响热塑性弹性体...     

Effect of nano-filler dispersion on the thermal, mechanical and water sorption properties of green environmental polymer

Partially exfoliated nanocomposite（2） has been synthesized by intercalation of poly（propylene carbonate）（PPC） into commercial clay,Cloisite 20B（PPC/C-20B）.Nanocomposite 2 was characterized phiso-chemically and exhibited high thermal,mechanical and anti-water sorption properties as compared to PPC and intercalated nanocomposite（1） of PPC/C-20B having same amount of clay.TGA results revealed that the thermal decomposition temperature(T_d,50%) of 2 increased significantly,being 40 K and 17 K higher than that of pure PPC and 1,respectively,while DSC measurements indicated that the nano-filler dispersion of 2 increased the glass transition temperature from 21℃to 31℃.Accordingly,2 showed high elastic modulus,hardness and anti-water absorption capacity.These thermal,mechanical and anti-water absorption improvements are of great importance for the application of PPC as packaging and biomaterials.     

交联助剂对PPC／NBR弹性体结构和性能的影响

研究了马来酸酐（ＭＡ）及异氰脲酸三烯丙酯（ＴＡＩＣ）对聚丙撑碳酸酯／丁腈橡胶共混弹性体结构和性能的影响，发出加入ＭＡ或ＴＡＩＣ能有效地改善交联网络；加入适量ＭＡ能显著改善共混弹性体热氧老化稳定性；加入ＴＡＩＣ使共混弹性体具有优良的高弹特性和力学性能。     

超疏水性材料表面的制备、应用和相关理论研究的新进展

文章总结了Wenzel方程、Cassie方程及一种具有极高精确度的,可方便测出固体表面上液滴前进角和后退角的测试方法等超疏水表面的最新理论研究成果;回顾了溶胶凝胶法、化学修饰法、喷涂法、液相法、化学蚀刻法、水热法、微相分离法、原位聚合法、静电纺丝法、阳极氧化法等近几年出现的超疏水表面的制备方法;介绍了在微物质能量、生物医学、光学、燃料以及电池应用等领域超疏水表面的最新功能性的应用。最后,客观地展望了超疏水表面制备及理论研究的发展方向。     

径向基-偏最小二乘-贝叶斯方法及其在化学模式分类中的应用

提出一种用于模式分类的RBF-PLS—Bayes方法。它集成地应用径向基(RBF)变换与偏最小二乘(PLS)方法，从原有模式中提取出分类能力甚强的成分，然后进行贝叶斯(Bayes)判别。这种集成方法尤其适用于复杂化学信息的模式分类，本文将其应用于两种类型的化学模式分类问题，均取得了令人满意的效果。与经典的判别分析方法和单纯的神经网络方法相比，具有明显的优越性。     

Liquid chromatographic determination of pyrantel tartrate in medicated formulations

The validation of a novel liquid chromatographic (LC) method for the determination of pyrantel tartrate in feed is presented. The method provides a significant improvement over the efficiency and precision of AOAC Official Method 978.30. The method was shown to be accurate, precise, linear, and robust for medicated articles. Unlike the official method, the LC method was shown to be a superior stability-indicating method. After the method was validated by using laboratory blends, the effectiveness of the method was demonstrated with marketed product as well.     

从头算VB-MP2组合方法

提出了一种经济实用的价键计算方法VB-MP2方法.将体系的电子分为非活性电子和活性电子,应用MP2方法计算非活性电子的相关能效应,用VB方法处理活性电子.测试计算表明,该方法保持了价键方法的特点,且计算结果比传统的使用芯-价分离技术的价键方法有较大的改善.     

有机酸分析的柱后缓冲电导法与紫外法、直接电导法的比较

柱后缓冲电导法采用柱后调节pH值,电导检测器检测的方法检测有机酸,它避免了经常使用的紫外法选择性差,直接电导法灵敏度低的缺点,是可以实现有机酸准确定量的一种新型分析方法.本文比较了这三种方法的分析结果.     

Development of effective Stokesian dynamics method for ferromagnetic colloidal dispersions (cluster-based Stokesian dynamics method)

We have developed a new Stokesian dynamics (SD) method for nondilute colloidal dispersions, which enables us to reduce drastically the computation time. To verify the validity of the present method, which is called the "cluster-based SD method," three-dimensional simulations of a ferromagnetic colloidal dispersion have been carried out for a simple shear flow. The correlation function and viscosity have been evaluated to compare the results obtained by the present method with those obtained by the ordinary SD method and by the method of ignoring hydrodynamic interactions between particles. The results obtained here are summarized as follows. The transient properties from an initial state obtained by the present method agree well with those obtained by the ordinary method, even if a radius r(clstr), which defines the cluster formation, is taken as a small value such as r(clstr)=1.2d (d is the particle diameter). Also, the equilibrium properties such as the pair correlation function and viscosity obtained by the present cluster-based method are in satisfactory agreement with those obtained by the ordinary SD method. Furthermore, the cluster-based method drastically reduces the computation time to about one-fourteenth to one-seventieth that of the ordinary method. It is clear from these results that the cluster-based SD method is significantly superior to the ordinary SD method for ferromagnetic colloidal dispersions for which a large model system such as N=1000 or 10,000 is indispensable in simulations.     

Lower Bounds to Ground-State Eigenvalues II

An alternative to the Temple method for calculating a lower bound to the ground-state eigenvalue of an operator is presented. The method presented is an improvement and generalization upon a similar method [M.G. Marmorino, J. Math. Chem. 32 (2002) 19–29]. For the system tested the lower bound of the current method is significantly superior to the Temple method and the previous method. Furthermore, the current method (like its predecessor) is able to generate a lower bound when the Temple method fails.     

叠加内标法色谱定量分析

 叠加内标法是指在色谱定量分析中将内标法与叠加法结合的一种新的定量方法。叙述了叠加内标法定量的理论依据 ,规定了其操作步骤 ,并详细说明了这种方法的适用条件和优缺点。     

Evaluation of hybrid laser-cut and cast miniature fracture specimens

This paper presents a new hybrid laser-cutting method for producing fracture test specimens from thermosetting materials. The hybrid approach combines casting of a sheet of material with subsequent laser-cutting of the test specimens. The new approach was compared to the traditional casting method using a fracture toughness test. For this study, a compact version of the tapered double cantilever beam (cTDCB) was used as a specimen geometry for both manufacturing methods. The cTDCB specimen is crack length independent, and crack length investigations were performed to ensure the crack length independence of the cTDCB specimens. The specimens that were made by the hybrid laser-cut method were found to be comparable to the specimens obtained by the traditional casting method. Moreover, the laser-cut method provides a fast and accurate method to make a significant number of samples in a reasonable time. These tests show that the hybrid laser-cut method could be a good alternative to the traditional casting method.     

Equivalence of Two Lower Bound Methods

Two lower bound methods are compared: the inverse method and a generalized variance method. As the generalized variance method is a generalization of the simple method of variance, the inverse method is shown to be a generalization of the Temple formula. We show that for the same a priori information and basis set, the generalized variance and inverse methods are equivalent.