刚性有机粒子对聚氯乙烯／氯化聚乙烯共混体系形态和增韧机理的研究

刚性有机粒子对聚氯乙烯／氯化聚乙烯共混体系形态和增韧机理的研究周丽玲，吴其晔，杨文君，刘士龙，张漫（青岛化工学院橡胶系青岛２６６０４２）关键词刚性有机填料，聚氯乙烯ＰＶＣ，氯化聚乙烯（ＣＰＥ）形态，增韧机理在共混改性中，弹性体增韧硬质聚氯乙烯（ｎｙＶ...     

核－壳型弹性体对热塑性树脂的增韧

本文阐述了橡胶微粒对热塑性树脂的增韧机理，以及核－壳弹性体对塑料共混物性能的影响。其目的是为合成抗冲改性用核－壳弹性体提供参考。     

硬质PVC/ACR共混体系的增韧机理研究

通过TEM、SEM等方法研究了不同结构丙烯酸酯类抗冲改性剂（ACR）对聚氯乙烯（PVC／ACR共混体系形态结构的影响,对ACR增韧硬质PVC的机理作了探讨,当PVC中含有8phr以上完善核壳结构的ACR时,在共混体系能形成网络结构,这一结构在受冲击时产生多重银纹,并实现银纹的纯化,在PVC／ACR共混体系的增韧机理中占主导地位,同时,ACR诱发PVC产生剪切形变也是提高其增韧效果的因素。     

共混方法对聚氯乙烯/聚丙撑碳酸酯相容性影响

本文分别用溶液法和熔融法制得聚氯乙烯（PVC）与聚丙撑碳酸酯（PPC）共混试样，用DSC证明PVC／PPC共混物不相容，但它们不相容的程度受分子量、共混比例等因素的影响，并根据玻璃化转变温度（Tg）计算出溶液共混试样PPC富相中PVC的重量百分含量。NBR／PPC弹性体作偶联剂对PVC／PPC共混体系具有较好的增容作用，共混物中PPC的用量及分子量对共混体系性能有一定的影响。     

PVC/CPE/POE热塑性弹性体特性研究

研究了氯化聚乙烯（CPE）增容PVC／POE热塑性弹性体的结构与性能,通过对比使用增容剂CPE前后体系的力学性能,确证CPE对PVC／POE体系具有良好的增容效果。用DSC,SEM对热塑性弹性体的结构特性进行了研究,采用动态硫化的方法,提高了热塑性弹性体的性能。     

MMA接枝改性PVC/CaCO3纳米复合材料的力学性能

采用熔融共混法制备PMMA接枝改性纳米CaCO3增韧PVC（PVC/CaCO3）复合材料,并研究了复合材料的力学性能.结果表明,通过表面PMMA的接枝改性,可以显著提高纳米CaCO3增韧聚氯乙烯复合材料的拉伸强度和拉伸模量,在纳米CaCO3颗粒表面PMMA包覆层厚度为2nm时,复合材料的拉伸强度和拉伸模量达到极大值.对比于未处理纳米CaCO3和钛酸酯偶联剂处理纳米CaCO3,PMMA接枝改性纳米CaCO3增韧PVC复合材料的拉伸强度得到较大幅度提高.SEM显示,经过PMMA接枝改性后的碳酸钙在PVC基体中分散均匀,与基体界面结合良好.     

三元乙丙橡胶/聚丙烯热塑性弹性体

综述了三元乙丙橡胶/聚丙烯(EPDM/PP)热塑性弹性体的发展历程、市场情况以及EPDM/PP热塑性弹性体的结构、性能及其影响因素。EPDM/PP热塑性弹性体由EPDM和PP通过动态硫化技术制备而成,在室温下具有橡胶的高弹性,在加工温度下具有塑料的流动性。在性能上,EPDM/PP热塑性弹性体受加工设备、共混工艺、配合体系的综合影响。     

聚丙烯／聚烯烃弹性体共混体系的结构-性能关联

聚丙烯是目前应用最广泛的通用塑料之一。为了克服聚丙烯脆性大的弱点,人们发展了多种方法来增韧聚丙烯,其中聚丙烯和聚烯烃弹性体共混是常用的改性聚丙烯的方法。本文介绍了聚丙烯／聚烯烃弹性体共混物相容性的研究方法和较为普遍接受的增韧理论,并对近年来国内外聚烯烃弹性体增韧聚丙烯的研究进展做了介绍。     

PVC/ACR共混物微观结构与性能

本文研究了聚氯乙烯/丙烯酸酯类共聚物(PVC/ACR)共混物的应力-应变行为和冲击强度对ACR 用量的依赖关系。ACR对 PVC有良好的增韧作用,提高了PVC抗冲击性能。考察了三盐基性硫酸铅和硬脂酸钡-硬脂酸镉稳定剂对共混体系的影响,实验结果说明不同的热稳定体系对ACR改性PVC的效果有差别。动态力学性能测定结果表明PVC/ACR共混物存在两个玻璃化转变温度,证明PVC与ACR不相容性;而两个转变温度随共混物组成改变而变化,说明PVC与ACR之间存在着相互作用,PVC/ACR为部分相容体系。通过透射电子显微镜观察PVC/ACR共混物的微观结构形态表明:PVC与 ACR为两相体系,ACR呈粒状分布在PVC连续相中。但是,采用硬脂酸钡-硬脂酸镉稳定体系时,随着ACR用量增加,ACR的分散形态由粒状分散逐渐形成网络结构形态,与此相对应的共混物具有更好的抗冲击性能。     

TPU共混增韧POM的研究

通过机械共混的方法制备了聚甲醛(POM)和热塑性聚氨酯弹性体(TPU)复合材料.考察了不同硬度TPU及其含量对共混材料韧性的影响.结果表明,TPU硬度的变化对共混材料的力学性能起着非常重要的作用,硬度为65HA的TPU对POM的增韧效果较好,对POM的相形态和结晶性能影响更为显著.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.