咖啡因分子印迹固相萃取柱的制备及应用

以咖啡因作为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,制备了咖啡因分子印迹聚合物(MIP)。与非印迹聚合物(NIP)相比,MIP对咖啡因具有更高的吸附容量和选择性,MIP和NIP对咖啡因的最大静态吸附量分别为28.1和16.5mg/g,相对选择因子为1.25。以咖啡因分子印迹聚合物为固相萃取填料,结合高效液相色谱(HPLC),建立了茶水中咖啡因浓度及人饮茶后血清中咖啡因浓度的检测方法。考察了洗脱剂种类和用量对咖啡因回收率的影响。当萃取柱依次以2mL水活化,水溶液上样,2mL水淋洗,6mL甲醇-乙酸(9∶1,V/V)洗脱,咖啡因在MIP固相萃取柱上的回收率达到97.5%,而在NIP柱上的回收率仅为54.9%。     

三聚氰胺分子印迹整体柱识别性能的研究

以三聚氰胺(MAM)为模板分子,甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,原位聚合法制备了对MAM有很强选择性识别能力的分子印迹整体柱。采用脉冲洗脱法快速筛选MAM的洗脱剂,通过前沿色谱法测定了整体柱对MAM的结合容量。实验表明,所制备的印迹整体柱对MAM有极强亲和作用力,即使在强极性流动相中(甲醇或甲醇-水(V/V=80/20)),MAM在印迹柱上也有强保留,不被洗脱。实验测得结合位点数(Lt)和解离常数(Kd)分别为:印迹柱Lt=2.28×103μmol/g,Kd=2.45×10-5mol/L;空白柱Lt=366μmol/g,Kd=23.7mo/L。该印迹整体柱有望作为固相萃取柱,在线或离线选择性富集样品中的MAM。     

齐多夫定替代模板分子印迹聚合物的制备及其在血清样品固相萃取中的应用

制备了齐多夫定(AZT)替代模板分子印迹聚合物(MIP)用于血清样品的前处理。利用计算机模拟选择最佳单体甲基丙烯酸和交联剂二乙烯基苯,用自制的替代模板(AZT酯化物)制备了AZT的MIP。将替代模板MIP作为固相萃取吸附剂,进行固相萃取并优化萃取条件。确定pH 7的KH2PO4缓冲溶液为上样溶剂,2%(V/V)乙腈/pH 7的KH2PO4缓冲溶液为淋洗剂,甲醇/乙酸(9:1,V/V)作为洗脱剂。渗漏实验结果显示齐多夫定MIP的吸附容量为9.10 mg/g,而非分子印迹聚合物(NIP)的吸附容量仅为1.77 mg/g。以AZT酯化物和拉米夫定为结构类似物,进行吸附实验,发现MIP具有高选择性。本文所制备的替代模板分子印迹聚合物在水溶液体系中表现出了很好的识别能力。血清样品经印迹聚合物固相萃取后,用高效液相色谱法测定,发现MIP萃取柱回收率为99.3%,NIP萃取柱仅为13.2%,说明替代模板MIP可用于血清样品中AZT的选择性分离富集,并可以避免模板渗漏。     

儿茶素活性成分分子印迹聚合物的固相萃取研究

以表没食子儿茶素没食子酸酯(Epigallocatechin-gallate,EGCG)为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在光冷引发条件下合成EGCG分子印迹聚合物,利用该聚合物制成分子印迹固相萃取柱,用于固相萃取茶叶提取物茶多酚,对萃取柱中的清洗液、洗脱剂、上载量等进行了选择.结果表明,在萃取柱上载样品之后,先用V(甲醇):V(水)＝1:9溶液进行清洗,再用V(甲醇):V(乙酸)＝9:1混合液进行目标分子的洗脱,可以得到比较纯的目标物质EGCG(色谱峰相对峰面积达92.4%),萃取柱在上载样品并进行清洗、洗脱之后,EGCG的回收率达69.3%.分子印迹柱具有较好的稳定性和耐用性能,使用20次后其选择性识别能力仍未降低,但空白印迹柱却没有这样的选择性识别能力.     

流动注射在线预富集-高效液相色谱法测定水中的4-壬基酚和双酚A

建立了以香烟过滤嘴作吸附剂,在线固相萃取(SPE)与高效液相色谱(HPLC)联用测定水中双酚A(bisphenol A,BPA)和4-壬基酚(4-nonylphenol,4-NP)的方法。对于高效液相(HPLC)在线固相萃取而言,采用内置香烟过滤嘴的预富集圆形柱来代替传统的高效液相仪中的注射管进样环用于在线固相萃取。通过流动注射仪将样品分析物负载加入到预富集柱中,随后采用V(甲醇):V(H2O)=93:7混合液为洗脱剂对富集的样品分析物进行洗脱。采用Eclipse XDB-C18色谱柱,V(甲醇):V(H2O)=93:7混合液为流动相,流速为1.0mL/min,紫外检测波长为227nm,保留时间定性,外标法定量。双酚A在0.005～0.8mg/L、4-壬基酚在0.04～8.0mg/L范围内,两者峰面积与浓度呈线性关系,相关系数分别为0.9985和0.9983,检出限(S/N=3)分别为2.1和10.0μg/L,富集倍数分别为816和346倍。对标准混合物(BPA:0.2mg/L;4-NP:2.0mg/L)重复测量11次的相对标准偏差为2.3%和1.5%。本方法用于当地河流水样中BPA和4-NP的测定,回收率为93.2%～105.4%。     

高效液相色谱柱后衍生测定鸡组织中甲基盐霉素残留量

建立了鸡组织中甲基盐霉素的高效液相色谱柱后衍生化分析方法.样品经异辛烷提取,离心后上层有机相过硅胶固相萃取小柱,洗脱液浓缩后用V(甲醇)∶ V(水)=90∶ 10混合液溶解.采用Inertsil ODS-3 C18柱,以V(甲醇): V(乙酸)∶ V(水)=94∶ 3∶ 3为流动相,香草醛为衍生剂进行高效液相色谱柱后衍生分析,520 nm检测,外标法定量.方法检出限为6 μg/kg; 定量限为20 μg/kg; 添加浓度在20～1800 μg/kg范围内,平均添加回收率为76.4%～93.1%; 批内相对标准偏差(RSD)在2.6%～8.9%之间; 批间相对标准偏差(RSD)在4.7%～9.7%之间.样品浓度在0.07～10.0 mg/L范围内与峰面积呈良好的线性关系,r>0.9993.     

高效液相色谱法测定长柄扁桃仁中的苦杏仁甙

建立了高效液相色谱法测定长柄扁桃仁中的苦杏仁甙的方法.样品中的苦杏仁甙用甲醇超声提取20 min.在Shim-pack VP-ODS(250 mm×4.6 mm i.d.,5 μm)色谱柱上,以V(甲醇):V(水):V(乙腈)＝10:40:50为流动相进行洗脱,检测波长215 nm的条件下,测得长柄扁桃仁中苦杏仁甙的平均质量分数为35.40 mg/g.该法线性范围为0.64～32.0 mg/L,线性相关系数r=0.9997,检出限为1.1 μg/L,平均回收率为94%(N=3).此法可为果仁中苦杏仁甙的测定提供参考.     

高效液相色谱法测定铼

采用反相液相色谱法,在Agilent ODS C18(4.6×150mm)色谱柱上,以V(甲醇):V(水)=30:70为流动相,流速为0.8 mL/min,紫外检测波长为254砌对铼进行分离和检测.ReO4-在1～40 mg/L浓度范围内与峰面积线性关系较好(R=0.9992),回收率为101.4%～102.2%,重复性实验标准偏差(RSD)为1.11%.     

高效液相色谱法测定化妆品中乙内酰脲

建立了高效液相色谱-二极管阵列检测器(HPLC-PDA)测定化妆品中乙内酰脲的方法.取1.0 g样品,加入10 mL乙腈,均质、离心、上清液浓缩、水溶解后,用C18固相萃取小柱净化,用水定容.经C18液相色谱柱分离,以甲醇和水为流动相,梯度洗脱,检测波长为210 nm.在1～20 mg/L范围内,色谱峰面积与乙内酰脲的...     

分子印迹固相萃取联用高效液相色谱分离测定海水中的膝沟藻毒素GTX1,4

采用分子印迹技术,以鸟嘌呤核苷为虚拟模板,本体聚合,合成GTX1,4的分子印迹聚合物(MIP).傅里叶红外变换光谱(FT-IR)和扫描电子显微镜(SEM)的结果显示,MIP具有分布均匀、大小均一的孔穴.平衡吸附实验表明,分子印迹聚合物(MIP)比非分子印迹聚合物(NIP)具有更高的结合容量,对膝沟藻毒素GTXI,4有更好的选择性.用MIP填充固相萃取小柱(MISPE),以0.1 mol/L乙酸溶液为淋洗液,甲醇-水(95∶5,V/V)溶液为洗脱液时回收率最高,达到85.0％.用优化后的淋洗洗脱条件测定微小亚历山大藻和塔玛亚历山大藻藻液中的GTX1,4,分别为1.10和0.99 μg/L,RSD分别为3.3％和4.4％,说明本方法具有较好的检测限和较高的测定精密度.     

以分子印迹聚合物为固定相手性拆分1,1′-联-2-萘酚及其衍生物

以(R)-(+)-1,1′-联-2-萘酚为模板分子,4-乙烯基吡啶为功能单体合成了分子印迹聚合物,将其作为高效液相色谱的固定相,研究其手性识别特性。对该固定相的手性拆分的色谱条件进行了优化。实验结果表明,合成的印迹聚合物对(R)-(+)-1,1′-联-2-萘酚具有较强的亲和力和特定的选择性,能有效拆分1,1′-联-2-萘酚对映体,分离因子最高达到12.25。通过优化色谱条件,该分子印迹聚合物还能对与1,1′-联-2-萘酚结构相似的衍生物5,6,7,8,5′,6′,7′,8′-八氢-1,1′-联-2-萘酚和1,1′-联萘-2-氨基-2′-酚进行手性拆分,分离因子分别达到1.51和2.40。     

三甲氧基苄啶分子印迹整体柱的制备及色谱性能

选择甲基丙烯酸为功能单体\, 甲基丙烯酸乙二醇双酯为交联剂, 制备了三甲氧基苄啶分子印迹整体柱, 对整体柱材料的形貌进行了表征, 并且研究了TMP和5种磺胺类药物在分子印迹整体柱上的色谱行为.     

类模板分子印迹整体柱测定甲氧苄啶的研究

利用三聚氰胺(MAM)与甲氧苄啶(TMP)分子中嘧啶环局部结构类似的特性,以三聚氰胺为类模板分子,甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EDMA)为交联剂,原位聚合法制备了对甲氧苄啶(TMP)有识别作用的分子印迹(MIP)整体柱.在优化的色谱条件下,该印迹整体柱对甲氧苄啶显示出选择性识别作用,而对叶酸、...     

沉淀聚合法制备三聚氰胺分子印迹聚合物微球

以三聚氰胺为模板分子,以甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在乙腈-乙二醇(20∶1,V/V)混合溶剂中沉淀聚合制备了分子印迹聚合物微球.利用1H-NMR和紫外光谱方法研究了模板与功能单体相互作用情况.结果表明,三聚氰胺与甲基丙烯酸(MAA)分子通过协同氢键作用形成1∶2型氢键配合物.利用扫描电镜和红外光谱对聚合物微球的结构进行了表征.结果表明,印迹聚合物近似圆球形,粒径约为400～500 nm,且大于非印迹聚合物微球,表面存在大量的结合位点.通过静态平衡吸附实验研究了聚合物微球对模板分子的结合能力,印迹聚合物微球在4 h后逐渐达到吸附平衡,Scatchard分析表明,印迹聚合物微球主要存在两类不同的结合位点,最大表观结合量(Qmax)和平衡离解常数(Kd)分别为Qmax1=22.97μmol/g,Kd1=0.14×10-3 mol/L;Qmax2=157.65μmol/g,Kd2=2.55×10-3 mol/L,计算得出表观印迹效率和有效印迹效率分别为68%和58%.此方法合成的印迹聚合物微球对三聚氰胺有较好的结合性能,可应用于三聚氰胺的分离检测.     

分子印迹手性分离过程的热力学研究

以丙烯酰胺为功能单体, 以二甲基丙烯酸乙二醇酯为交联剂, 在模板分子N-叔丁氧羰酰-L-色氨酸(N-Boc-L-Trp)和N-叔丁氧羰酰-L-酪氨酸(N-Boc-L-Tyr)的存在下, 分别采用光引发聚合和热引发聚合制备了N-Boc-L-Trp和N-Boc-L-Tyr的分子印迹聚合物(MIPs), 进行分子印迹手性分离过程的热力学研究. 测定了分离过程的熵变、焓变和自由能变化. 结果显示, 在流动相中添加异丙醇或甲醇等强氢键竞争性溶剂时, 熵变对分离起到了主要作用, 而且分离过程中的溶剂化对分离的影响也非常大. 分子印迹聚合物对印迹分子和非印迹分子进行分子识别的主要作用是印迹聚合物与印迹分子匹配的三维空间结构.     

Determination of methotrexate in human serum by high-performance liquid chromatography combined with pseudo template molecularly imprinted polymer

A pseudo template molecularly imprinted polymer (MIP) was prepared for methotrexate (MTX) and a RP-HPLC method combined with the MIP was developed for the determination of MTX in human serum. Because of the poor solubility of MTX in common MIP preparation solvents, trimethoprim (TMP), a molecule having the similar imprinting sites as MTX, is selected as the pseudo template. The MIP was prepared using methacrylic acid (MAA) and ethylene glycol dimethacrylate as functional monomer and cross-linker, respectively. ¹H NMR study showed highly strong interaction between TMP and MAA with hydrogen bonds. Chromatographic behaviors indicated that the TMP-MIP possessed excellent affinity and selectivity for MTX. And the imprinting factor for MTX was high up to 9.5 when 7:3 of acetonitrile:methanol (v/v) was used as mobile phase. Moreover, TMP-MIP was used as the solid-phase extraction (SPE) material to enrich the target compound MTX in human serum samples for HPLC analysis. The SPE process was carefully optimized and good recoveries of MTX were obtained as 81.6–86.2% with RSD of 0.22–1.84% when the spiked concentration of MTX was 2.0–10.0 μg mL⁻¹ in human serum samples. The results indicated that the pseudo template MIP can be applied to preconcentration, purification and analysis of MTX in clinic samples.     

钯纳米粒子修饰的三甲氧苄啶分子印迹膜传感器的制备及其识别性能研究

采用N,N′-亚甲基双丙烯酰胺(MBA)为功能单体、钯纳米粒子为掺杂剂、马来松香丙烯酸乙二醇酯为交联剂,在玻碳电极上热聚合具有三甲氧苄啶(TMP)识别性能的钯纳米材料修饰的分子印迹传感膜.采用扫描电镜及红外光谱对合成的钯纳米材料、印迹传感膜的形貌及其结构进行了表征;采用循环伏安法(CV)、交流阻抗法(EIS)对钯纳米粒子掺杂的印迹电极与无掺杂电极的电化学性能进行了研究.结果表明,纳米粒子掺杂的印迹电极与无掺杂电极的表面形貌及电化学性能明显不同.差分脉冲伏安法(DPV)表征结果表明,TMP的浓度在5.0×10-7~4.0 ×10-3 mol/L范围内与脉冲峰电流呈良好的线性关系(R=0.9995),检出限为3.2×10-8 mol/L (S/N=3).此钯纳米粒子掺杂的印迹传感器具有较高的灵敏度.即时电流测定结果表明,新诺明(SMZ)、磺胺嘧啶(SDZ)、葡萄糖 (Glu)、尿素 (Urea)对三甲氧苄啶(TMP)的测定不产生干扰.将此印迹传感器用于实际样品中TMP的检测,加标回收率为96.8%~102.0%.     

Preparation and evaluation of molecularly imprinted polymers based on 9-ethyladenine for the recognition of nucleotide bases in capillary electrochromatography

A molecularly imprinted polymer (MIP) comprising 9-ethyladenine was polymerized in situ inside the capillary for the electrochromatographic separation of nucleotide bases. The capillary wall was first functionalized with 3-trimethoxysilylpropyl methacrylate (10% v/v) and 1,1-diphenyl-2-picrylhydrazyl (0.01% w/v) in toluene. Following this treatment, the capillary was filled with acetonitrile containing 9-ethyladenine, methacrylic acid, ethylene glycol dimethacrylate, and initiator. After polymerization, the MIP was shrunk into a film against the inner wall of the capillary with the syringe pump. The template was then removed with methanol under nitrogen flow. For evaluation the feasibility of the MIP column for the separation of nucleotide bases, some parameters including the pH, concentration of the background electrolyte, the applied voltage as well as the effect of organic modifier were studied. The migration behavior of nucleotide bases on the MIP column was also compared with that on the bare fused-silica column. The results indicated that the MIP columns demonstrated better recognition properties at a pH range of 6-8. The efficiency (plates/m) at pH 8 for the nonimprinted analyte was 75,300 for cytosine, 50,200 for thymine, and 14,800 for guanine. However, the efficiency for the imprinted analyte, adenine, was quite low. This was evidenced by the broad peak, yielding only 2600 plates/m.     

Carprofen-imprinted monolith prepared by reversible addition–fragmentation chain transfer polymerization in room temperature ionic liquids

To obtain fast separation, ionic liquids were used as porogens first in combination with reversible addition–fragmentation chain transfer (RAFT) polymerization to prepare a new type of molecularly imprinted polymer (MIP) monolith. The imprinted monolithic column was synthesized using a mixture of carprofen (template), 4-vinylpyridine, ethylene glycol dimethacrylate, [BMIM]BF₄, and chain transfer agent (CTA). Some polymerization factors, such as template-monomer molar ratio, the degree of crosslinking, the composition of the porogen, and the content of CTA, on the column efficiency and imprinting effect of the resulting MIP monolith were systematically investigated. Affinity screening of structurally similar compounds with the template can be achieved in 200 s on the MIP monolith due to high column efficiency (up to 12,070 plates/m) and good column permeability. Recognition mechanism of the imprinted monolith was also investigated.     

Synthesis of Chlorogenic Acid Imprinted Chromatographic Packing by Surface-initiated Atom Transfer Radical Polymerization and Its Application

A novel chromatographic packing of chlorogenic acid（CGA） molecularly imprinted polymer（MIP） based on the 5.0 ~tm silica was prepared by surface initiated atom transfer radical polymerization（SI-ATRP） with 4-vinylpyridine（4-VP） as functional monomer, ethyl glycol dimethacrylate（EDMA） as cross-linker in the mixture of methanol and water（7：3, volume ratio） under mild reaction conditions. The characteristics of CGA MIP were investi- gated by elemental analysis, thermogravimetric analysis（TGA）, Fourier transform infrared spectrometry（FTIR） and atomic force microscopy（AFM）. The effects of some chromatographic conditions such as mobile phase composition and temperature on the retention time were investigated. The adsorption capacity of the stationary phase for com- pounds was determined by frontal chromatographic technique. The results show that Freundlich isotherm fits the ex- perimental adsorption isotherm data better than Langmuir model does. The relatively high heterogeneity index values regressed with the Freundlich isotherm suggest the formation of fairly homogeneous MIP. Thermodynamic data（AAH and AAS） obtained by van＇t Hoff plots reveal an entropy-controlled separation. The CGA MIP column was shown to be successful for the separation and purification of chlorogenic acid from the extract of Honeysuckle.