Remarkable Chichibabin-type cyclotrimerisation of 3-nitrotyrosine, tyrosine and phenylalanine to 3,5-diphenylpyridine derivatives induced by hypochlorous acid

Reaction of 3-nitrotyrosine with HOCl in aqueous phosphate buffer (pH 7.4) leads to a mixture of extractable products, including 3,5-di(4-hydroxy-3-nitrophenyl)pyridine (15% isolated yield) and 3,5-di(4-hydroxy-3-nitrophenyl)-2-(4-hydroxy-3-nitrophenylmethyl)pyridine (3%) arising by a Chichibabin-like pyridine synthesis via N-chloroimine intermediates. Under the same conditions, phenylalanine gives 3,5-diphenylpyridine in 9% isolated yield, while tyrosine leads to 3,5-di(4-hydroxyphenyl)pyridine (3%) and 3-(3-chloro-4-hydroxyphenyl)-5-(4-hydroxyphenyl)pyridine (3%).     

Reactions of dialkyl (3,5-di-<Emphasis Type="Italic">tert</Emphasis>-butyl-4-oxocyclohex-2,5-dienylidenemethyl)phosphonates with alcohols and some transformations of the adducts

Reactions of dialkyl [(3,5-di-tert-butyl-4-oxocyclohexa-2,5-dien-1-ylidene)methyl]phosphonates with butyl, benzyl and propargyl alcohols in the presence of catalytic amounts of trifluoromethanesulfonic acid resulted in the formation of nucleophilic 1,6-addition products. Azide-alkyne cycloaddition reaction of dimethyl (3,5-di-tert-butyl-4-hydroxyphenyl)(prop-2-ynyloxy)methylphosphonate with benzyl azide and 1,3-bis-(2-azidoethoxy)benzene in the presence of copper sulfate and sodium ascorbate afforded 1,2,3-triazoles with sterically hindered phenol fragments.     

Dynamic equilibrium between dissociation and regeneration of the C-C bond in trispiro-conjoined cyclopropane compound

-The oxidation of 2,2-di(3,5-di-t-butyl-4-hydroxyphenyl)indan-1,3-dione by potassium hexacyanoferrate(III) afforded a trispiro-conjoined cyclopropane compound due to the bond formation between the ipso-carbons. Its cyclopropane ring was found to exist in solution in dynamic equilibrium with biradical species by the dissociation of the C-C bond, which is as long as 1.595 Å as revealed by X-ray crystal analysis.     

A DFT study on pyridine-derived N-heterocyclic carbenes

To appreciate the chemistry of N-heterocyclic carbenes (NHCs), eight carbenic tautomers of pyridine (azacyclohexadienylidenes) are studied at B3LYP/AUG-cc-pVTZ//B3LYP/6-31+G^∗ and B3LYP/6-311++G^∗∗//B3LYP/6-31+G^∗ levels of theory. Various thermodynamic parameters are calculated for these minima, along with a kinetic focus on carbene-pyridine tautomerization. Appropriate isodesmic reactions show stabilization energies of 2-azacyclohexa-3,5-dienylidene (1) and 4-azacyclohexa-2,5-dienylidene (6) as 119.4 and 104.1 kcal/mol, rather close to that of the synthesized 1,3-dimethylimidazol-2-ylidene (129.2 kcal/mol). Three different mechanisms are suggested for the tautomerizations including: [1,2]-H shift, [1,4]-H shift, and three sequential [1,2]-H shifts. The calculated energy barrier for [1,2]-H shift of 1 is 44.6 kcal/mol, while the first [1,2]-H shift for the proposed sequential mechanism of 6 requires 65.1 kcal/mol. Three preliminary minimum templates are introduced, which may possess the potential of synthetic consideration: 2,6-di(X)-3,5-dichloro-4-azacyclohexa-2,5-dienylidene for X=Mes, t-Bu, and Ad.     

Efficient synthesis of 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl (X: NMe2; OMe) by homocoupling of 1-bromo-3,5-di(p-X-phenylethynyl)benzene or by heterocoupling of 3,3′,5,5′-tetraethynylbiphenyl with p-X-phenylbromobenzene with nickel or palladium complexes, respectively

The conjugated 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl derivatives were efficiently obtained by homocoupling of 1-bromo-3,5-di(p-X-phenylethynyl)benzene mediated by zero-valent nickel complexes.The 1-bromo-3,5-di(p-X-phenylethynyl)benzene was previously prepared by heterocoupling between 1-bromo-3,5-di(ethynyl)benzene and p-X-iodobenzene (X: NMe₂; OMe) catalysed by the palladium/copper system in good yield. The necessary 1-bromo-3,5-di(ethynyl)benzene was obtained by heterocoupling between 1,3,5-tribromobenzene and 2-methyl-3-butyn-2-ol catalysed by palladium and successive treatment with sodium hydroxide in dry toluene, in good yield.The same 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl (X: NMe₂; OMe) derivatives were alternatively synthesised in highest yield by heterocoupling between 3,3′,5,5′-tetra(ethynyl)biphenyl and p-X-bromobenzene (X: NMe₂; OMe) catalysed by palladium in excellent yields. Previously, 3,3′,5,5′-tetra(ethynyl)biphenyl was obtained in practically quantitative yield by homocoupling of 1-bromo-3,5-di[4-(2-methyl-3-butyn-2-ol)] benzene mediated by the zero-valent nickel complex to the 3,3′,5,5′-tetra{di[4-(2-methyl-3-butyn-2-ol)]}biphenyl followed the treatment with sodium hydroxide.     

Stereoselective synthesis of novel benzoins catalysed by benzaldehyde lyase in a gel-stabilised two-phase system

Asymmetric benzoin condensation was performed using recombinant benzaldehyde lyase (BAL) from Pseudomonas fluorescens Biovar I. To enable the conversion of hydrophobic substrates, the enzyme was entrapped in polyvinyl alcohol and suspended in hexane. Compared to the reported application of the biocatalyst in an aqueous phase containing 20% DMSO, the productivity of the resulting gel-stabilised two-phase system was 3-fold better. The entrapment process had an efficiency of >90%, no enzyme or cofactor was lost during reaction or storage. The entrapped enzyme was stable in hexane for 1 week at 4 °C and more than 1 month at −20 °C. Without preceding optimisation the novel benzoins (R)-1,2-di(3-furanyl)-2-hydroxyethanone, (R)-2-hydroxy-1,2-di(3-thienyl) ethanone, (R)-1,2-di(4-ethoxyphenyl)-2-hydroxyethanone, (R)-1,2-di(3-ethoxyphenyl)-2-hydroxyethanone, (R)-2-hydroxy-1,2-di(3-tolyl)ethanone, and (R)-1,2-di(benzofuran-2-yl)-2-hydroxyethanone were prepared with yields up to 31.8% and enantiomeric excess >99%.     

Hexasulfanyl analogues of cyclotriveratrylene

The synthesis of four 3,4-di(alkylsulfanyl)benzyl alcohol derivatives is described, in five steps from methyl 3,4-di(hydroxy)benzoate via a Newman–Kwart rearrangement. Incubation of these derivatives in formic acid affords 2,3,7,8,12,13-hexakis(alkylsulfanyl)-10,15-dihydro-5H-tribenzo[a,d,g]cyclononene products, which are hexa-sulfanyl analogues of the well-known supramolecular cavitand host, cyclotriveratrylene (CTV). The yield of this cyclization depends strongly on the alkylsulfanyl substituents present, in the order SMe > SEt ≈ SiPr ? SBn. A crystal structure determination of one of the cyclotrimers shows a mode of self-association that is commonly exhibited by CTV itself.     

新型树枝状分子3,5-二[3,5-二(4-羧基苯甲氧基)苯甲氧基]苯甲醇的合成

采用收敛法,以对氰基苄溴和3,5-二羟基苯甲醇为原料,依次合成了端基为腈基的芳醚树枝状分子3,5-二(4-腈基苯甲氧基)苯甲醇(4)和3,5-二[3,5-二(4-腈基苯甲氧基)苯甲氧基]苯甲醇(6);4与6分别经水解制得以羧基为端基的新型芳基苄醚树枝状分子3,5-二(4-羧基苯甲氧基)苯甲醇和3,5-二[3,5-二(4-羧基苯甲氧基)苯甲氧基]苯甲醇,其结构经UV-Vis,1H NMR,IR,MS和元素分析表征.     

3-methylthio-1,2-dithiolylium salts—II: Reaction with 4-hydroxy-3h-pyran-2,6-dione. 1,3-bis-(1,2-dithiol-3-ylidene)-2-propanones

A simple route to the hitherto unknown 1,3-bis-(1,2-dithiol-3-ylidene)-2-propanones is reported: 3-Methylthio-1,2-dithiolylium salts condense with 4-hydroxy-3H-pyran-2,6-dione to 3,5-bis-(1,dithol-3-ylidene)pyran-2,4,6-triones, which are converted by acidic hydrolysis into the propanones.     

Aerobic oxidative dehydrogenation of coordinated imidazoline units of pincer ruthenium complex

A new pincer ruthenium complex (1; [RuL¹(tpy)](PF₆); L¹ = 1,3-di(2-imidazoline-2-yl)benzene, tpy = 2,2′:6′,2″-terpyridine) having a κ³NCN pincer ligand with two imidazoline units and related ruthenium complexes were synthesized and characterized. The imidazoline units of 1 were oxidized in air to give an imidazole-ligated pincer complex (2; [RuL²(tpy)](PF₆); L² = 1,3-di(2-imidazolyl)benzene). Results of the ¹H NMR spectroscopic and cyclic voltammetric studies of the complexes indicate that the σ-donor character of the pincer ligand of 1 induces the Ru-promoted oxidative dehydrogenation of coordinated imidazoline moieties to imidazole units with oxygen in air.     

Cross coupling of 3-bromopyridine and sulfonamides (RNHSO2R·R = H, Me, alkyl; R = alkyl and aryl) catalyzed by CuI/1,3-di(pyridin-2-yl)propane-1,3-dione

N-(3-Pyridinyl)-substituted secondary and tertiary sulfonamides have been synthesized in good to excellent yields by the reaction of 3-bromopyridine with primary and secondary alkyl and aryl sulfonamides (MeSO₂NH₂, MeSO₂NHMe, TolSO₂NH₂, TolSO₂NHMe, 1,3-propanesultam, and 1,4-butanesultam), catalyzed by CuI (20 mol %) and 1,3-di(pyridin-2-yl)propane-1,3-dione (20 mol %) with K₂CO₃ (200 mol %) in DMF (0.17 M for ArBr) at 110-120 °C over 36-40 h. 2-Bromopyridine, 4-bromopyridine, and a wide variety of substituted phenyl bromides can also be successfully coupled with sulfonamides under these reaction conditions.     

Viologen-based benzylic dendrimers: selective synthesis of 3,5-bis(hydroxymethyl)benzylbromide and conformational analysis of the corresponding viologen dendrimer subunit

Convergent and divergent strategies for the synthesis of viologen dendrimers with 1,3,5-tri-methylene-branching units are discussed. The title compound is easily transformed into 1-[3,5-bis(hydroxymethyl)benzyl]-4-(pyridin-4-yl)pyridinium hexafluorophosphate, which is used in sequential growth and activation steps as a CB₂ compound in the cascade-type dendrimer synthesis (B = -OH, activation = -OH → Br). Analysis of the dendrimer structure reveals that three torsional angles, that is, τ₁ between the two pyridinium units, τ₂ between the methylene and pyridinium and τ₃ between the methylene and phenyl, determine the conformational space of the dendrimers. We report here the crystal structure of 1-[3,5-bis(hydroxymethyl)benzyl]-4-(pyridin-4-yl)pyridinium as PF₆⁻ salt which represents the smallest subunit of the dendrimer that shows the same three torsional angles. The crystal structure together with the results from PM3 calculations opens an avenue to judge the structure of benzylic viologen-based dendrimers.     

Synthesis of 2,3-disubstituted thiazolidin-4-ones containing the sterically hindered 4-hydroxy-3,5-di(tert-butyl)phenyl grouping

A series of 2,3-disubstituted thiazolidin-4-ones containing 4-hydroxy-3,5-di(tert-butyl)phenyl groups has been synthesized. For preparation of these sterically hindered compounds the condensation of thioglycolic acid with azomethines — derivatives of 4-hydroxy-3,5-di(tert-butyl)benzaldehyde was used.I. M. Gubkin Russian State University for Petroleum and Gas, Moscow 117917. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 256–260, February, 2000.     

Aqua bridged Cu2 dimer of a heptadentate N4O3 coordinating ligand: Synthesis,structure and magnetic properties

The N₄O₃ coordinating heptadentate imidazolidinyl phenolate ligand, H₃L (2-(2′-hydroxyphenyl)-1,3-bis[4-(2-hydroxyphenyl)-3-azabut-3-enyl]-1,3-imidazolidine) forms with Cu(II) a rare aqua bridged complex [{Cu₂(μ-L)(μ-H₂O)}₂](ClO₄)₂ · 4.5H₂O (1 · 4.5H₂O). Complex 1 · 4.5H₂O contains two crystallographically different but chemically equivalent dinuclear [Cu₂(μ-L)(μ-H₂O)]⁺ cationic units in the asymmetric unit. The copper atoms of each dinuclear unit are in a distorted square-pyramidal environment and are held together by phenolate, imidazolidinyl and aqua bridges with a Cu···Cu separation of av. 3.34 Å. The compound exhibits a very weak antiferromagnetic exchange interaction (J = −0.77 cm⁻¹, ? = −2 J?₁?₂) between the two copper(II) (S = 1/2) ions. The ¹H NMR spectrum of the complex shows a total of 17 hyperfine shifted peaks, as expected from the idealized C_s symmetry of the compound, spread over a very large window of chemical shift, spanning about 250 ppm. The complex, having an appropriate intermetallic separation for catechol binding, shows catecholase like activity in MeCN at 25 °C, with the aerobic oxidation of 3,5-di-tert-butylcatechol (3,5-DTBC) to 3,5-di-tert-butylquinone (3,5-DTBQ).     

Synthesis and structural characterization of a dichloro zinc complex of N,N′-bis-(2,6-dichloro-benzyl)-(R,R)-1,2-diaminocyclohexane: Application to ring opening polymerization of rac-lactide

A novel dichloro zinc complex (L¹)ZnCl₂, where L¹ is N,N′-bis-(2,6-dichloro-benzyl)-(R,R)-1,2-diaminocyclohexane, has been synthesized and characterized. The dimethyl derivatives, generated in situ from the well characterized dichloro zinc complexes (L¹)ZnCl₂ and (L²)ZnCl₂, where L² is N,N′-bis-(benzyl)-(R,R)-1,2-diaminocyclohexane, were employed as initiators for the ring opening polymerization (ROP) of rac-lactide (rac-LA). The complexes were found to be highly efficient initiators yielding the polylactide (PLA) with a narrow molecular weight distribution. The catalytic activity and heterotactic selectivity of the Zn(II) complexes were affected by the substituents on the phenyl groups of benzyl moieties in (R,R)-1,2-diaminocyclohexane. The dimethyl derivative of (L²)ZnCl₂ produced highly stereocontrolled PLA with P_r = 0.75 at −25 °C.     

Uranyl(VI) complexes of [O,N,O,N′]-type diaminobis(phenolate) ligands: Syntheses,structures and extraction studies

The syntheses and crystal structures of four new uranyl complexes with [O,N,O,N′]-type ligands are described. The reaction between uranyl nitrate hexahydrate and the phenolic ligand [(N,N-bis(2-hydroxy-3,5-dimethylbenzyl)-N′,N′-dimethylethylenediamine)], H₂L1 in a 1:2 molar ratio (M to L), yields a uranyl complex with the formula [UO₂(HL1)(NO₃)] · CH₃CN (1). In the presence of a base (triethylamine, one mole per ligand mole) with the same molar ratio, the uranyl complex [UO₂(HL1)₂] (2) is formed. The reaction between uranyl nitrate hexahydrate and the ligand [(N,N-bis(2-hydroxy-3,5-di-t-butylbenzyl)-N′,N′-dimethylethylenediamine)], H₂L2, yields a uranyl complex with the formula [UO₂(HL2)(NO₃)] · 2CH₃CN (3) and the ligand [N-(2-pyridylmethyl)-N,N-bis(2-hydroxy-3,5-dimethylbenzyl)amine], H₂L3, in the presence of a base yields a uranyl complex with the formula [UO₂(HL3)₂] · 2CH₃CN (4). The molecular structures of 1–4 were verified by X-ray crystallography. The complexes 1–4 are zwitter ions with a neutral net charge. Compounds 1 and 3 are rare neutral mononuclear [UO₂(HLn)(NO₃)] complexes with the nitrate bonded in η²-fashion to the uranyl ion. Furthermore, the ability of the ligands H₂L1–H₂L4 to extract the uranyl ion from water to dichloromethane, and the selectivity of extraction with ligands H₂L1, H₃L5 (N,N-bis(2-hydroxy-3,5-dimethylbenzyl)-3-amino-1-propanol), H₂L6 · HCl (N,N-bis(2-hydroxy-5-tert-butyl-3-methylbenzyl)-1-aminobutane · HCl) and H₃L7 · HCl (N,N-bis(2-hydroxy-5-tert-butyl-3-methylbenzyl)-6-amino-1-hexanol · HCl) under varied chemical conditions were studied. As a result, the most efficient and selective ligand for uranyl ion extraction proved to be H₃L7 · HCl.     

Unexpected product distributions in the synthesis of 2,6-bis-(indazolyl)pyridine and 2-(pyrazol-1-yl)-6-(indazolyl)pyridine

Reaction of 2-bromopyridine with 2 equiv of sodium indazolide in diglyme at 140 °C affords 2,6-bis-(indazol-1-yl)pyridine and 2-(indazol-1-yl)-6-(indazol-2-yl)pyridine in purified yields of 24% and 68% respectively. A similar reaction, using 1 equiv of sodium indazolide at 70 °C, gives a low-yield mixture of 2-(indazol-1-yl)-6-bromopyridine and 2-(indazol-2-yl)-6-bromopyridine. Both these intermediates are transformed into 2-(pyrazol-1-yl)-6-(indazol-1-yl)pyridine and 2,6-di(pyrazol-1-yl)pyridine upon treatment with 1 equiv of sodium pyrazolide in diglyme at 140 °C. These observations imply that the indazolyl group is a leaving group comparable to a bromo substituent under nucleophilic attack by pyrazolide or indazolide ions under these conditions. No reaction was observed between 2-(pyrazol-1-yl)-6-bromopyridine and 1 equiv of sodium indazolide under the same conditions. A single crystal structure of its iron(II) complex confirmed the regiochemistry of 2,6-bis-(indazol-1-yl)pyridine, and revealed significant conformational flexibility in the distal ligand indazolyl groups.     

Synthesis and characterisation of two novel Rh(I) carbene complexes: Crystal structure of [Rh(acac)(CO)(L1)]

The [Rh(acac)(CO)(L)] (acac = acetylacetonato; L₁ = 1,3-bis-(2,6-diisopropylphenyl)imidazolinylidene and L₂ = 1,3-bis-(2,4,6-trimethylphenyl)imidazolinylidene) complexes were prepared by the action of the parent carbene on [Rh(acac)(CO)₂] in THF. The crystal structure characterisation of [Rh(acac)(CO)(L₁)] revealed a slightly distorted square planar geometry with the carbene ligand orientated almost perpendicular to the equatorial plane; an elongated trans Rh-O bond of 2.0806(18) Å reflecting the considerable trans-influence of the carbene ligand. By measuring the CO stretching frequencies in a range of [Rh(acac)(CO)(L)] complexes (L = CO, L₁, L₂, PPh₃, PⁿBu₃, P(O-2,4-^tBu₂-Ph)₃) the following electron donating ability series was established: L₁ ∼ L₂ ∼ PⁿBu₃ > PPh₃ > P(O-2,4-^tBu₂-Ph)₃ > CO; indicating the carbenes investigated in this study to have a similar electronic cis-influence as trialkyl phosphines. Both complexes do not display hydroformylation activity towards 1-hexene in the absence of added phosphine or phosphite ligands under the conditions investigated (P = 60; T = 85 °C). In the presence of a phosphine or phosphite ligand the resulting hydroformylation catalysis was identical to that observed for [Rh(acac)(CO)₂] and the corresponding ligand and subsequent high-pressure ³¹P NMR studies confirmed substitution of the carbene ligand under these conditions.     

Synthesis of Derivatives of of Δ2-Imidazolin-5-one and Imidazolidine Containing Residues of Sterically-hindered Phenols

1-Substituted 4-benzylidene-2-{-[3,5-di(tert-butyl)-4-hydroxyphenyl]vinyl}-4-benzylidene-²-imidazolin-5-ones have been synthesized by the interaction of azomethines and N-acylhydrazones (derivatives of 3,5-di(tert-butyl)-4-hydroxybenzaldehyde) with 4-benzylidene-2-methyloxazol-5-one. The acylation of 1,2-bis[3,5-di(tert-butyl)-4-hydroxybenzylideneamino]ethane with acid chlorides in acetonitrile in the presence of triethylamine leads to 1,3-diacyl-2-[3,5-di(tert-butyl)-4-hydroxyphenyl]imidazolidine.     

The first application of 4-alkoxy-1,1,1-trifluoroalk-3-en-2-ones in a three-component condensation protocol for the synthesis of 3-acyl-4-aryl-2-(trifluoromethyl)-2-hydroxy-3,4,7,8-tetrahydro-2H-chromen-5(6H)-ones

The one-pot, simple and efficient three-component condensation protocol for the preparation of a series of twenty-five new 3-acyl-4-aryl-2-(trifluoromethyl)-2-hydroxy-3,4,7,8-tetrahydro-2H-chromen-5(6H)-ones, where aryl = Ph, 4-tolyl, 4-ClPh, 4-NO₂Ph and 4-CHOPh, and acyl = Ac, Bz, 4-FBz, furan-2-oyl, thien-2-oyl and naphth-1-oyl, employing 1,3-cyclohexanedione, five aryl aldehydes and for the first time, six 4-alkyl(aryl/heteroaryl)-4-methoxy-1,1,1-trifluoroalk-3-en-2-ones, is described. Yields in 15-75% were obtained when the MCRs were performed in the presence of a catalytic amount of triethylamine (25 mol%) and in ethanol as solvent under reflux for 16 h. A representative X-ray diffraction data for 3-acetyl-4-phenyl-2-(trifluoromethyl)-2-hydroxy-3,4,7,8-tetrahydro-2H-chromen-5(6H)-one is also showed.