基于蒽-苯并咪唑鎓的荧光传感器对H2PO4-的高选择性识别

设计合成了基于蒽-苯并咪唑鎓的受体分子1和2,通过荧光发射光谱研究了受体分子1和2对F^-、Cl^-、Br^-、I^-、AcO^-、HSO₄^-、H₂PO₄^-、NO₃^-、ClO₄^-等阴离子的识别性能。 研究发现,在受体分子1和2的乙腈溶液(5.0×10^-6 mol/L)中加入10倍化学计量的H₂PO₄^-时,受体分子1的荧光猝灭百分数为13%,受体分子2的荧光猝灭百分数高达94%,表明受体分子2在构型上与H₂PO₄^-更匹配,可作为H₂PO₄^-的荧光关闭型(turn-off)探针。 受体分子2与H₂PO₄^-的结合比为1:1,结合常数为(3.70±0.16)×10⁴ L/mol,检出限为3.77×10^-6 mol/L。     

1,8-二(2-吡咯酰胺)-3,6-二氯咔唑的合成、晶体结构及阴离子识别研究

设计并合成了1,8-二(2-吡咯酰胺)-3,6-二氯咔唑化合物(1), 利用X射线单晶衍射研究了该化合物的固态结构. 利用荧光和紫外-可见光谱技术及¹H NMR滴定法研究了其对阴离子的识别. 研究结果表明, 化合物1对H₂PO₄^-离子有较强的识别能力, 且对H₂PO₄^-离子有明显的荧光增强效应, 可用来识别H₂PO₄^-离子. 同时¹H NMR滴定结果显示, 化合物1在阴离子识别过程中发生了构型转化.     

以黄酮冠醚金属配合物为基体的阴离子化学敏感器

合成了两种以新型黄酮类冠醚化合物(L)为配体的金属配合物[Ca(L)]²⁺(1)或[Mg(L)]²⁺(2).对其在乙腈溶液中与阴离子间的相互作用进行了研究.当这种化学敏感器和HSO₄^-或H₂PO₄^-阴离子相互作用时,可观察到强烈的颜色变化.UV光谱滴定实验表明,配合物1(或2)和HSO₄^-间形成了1:1的稳定配合物.配合物1(或2)对于HSO₄^-或H₂PO₄^-阴离子也可用荧光光谱法进行选择性检测,较UV方法有更高的灵敏度.还提出了配合物1(或2)与阴离子间通过两点结合方式,构成新的配合物可能结构的建议.通过色调变化和荧光测定的方法进行研究,结果表明,带有染料分子的金属配合物可用作为有效识别和检测阴离子的敏感器件.     

含脲苯并咪唑类离子液体的合成及阴离子识别性能

设计并合成了含脲苯并咪唑离子液体受体分子1~3, 利用紫外-可见光谱、 荧光光谱和 ¹H NMR滴定研究了其对F^-, Cl^-, Br^-, I^-, CH₃COO^-, HSO₄^-, H₂PO₄^-等阴离子的识别性能. 紫外-可见光谱研究发现, 受体分子1~3可选择性地识别F^-, 并形成1: 1型主客体配合物; 荧光光谱研究发现, 受体分子1~3对碱性阴离子有较好的识别作用, 主客体结合常数的顺序为H₂PO₄^->CH₃COO^-≈ F^->HSO₄^- ≈ Cl^->Br^- ≈ I^-; ¹H NMR滴定研究发现, 该类受体分子以咪唑2位CH和脲基NH与阴离子通过氢键结合, 但高浓度的F^-会导致受体分子发生脱质子作用.     

香豆素衍生物对阴离子的识别特性

用紫外光谱滴定法研究了3种香豆素衍生物与阴离子间存在的特殊识别行为,比较了受体分子结构对阴离子配合物稳定性的影响,以及阴离子浓度对配合物光谱的影响.实验结果表明:受体分子对F^- 、Cl^-、Br^-、Ac^-、H₂PO₄^-、HSO₄^-等不同种阴离子客体的识别能力存在一定差异,受体分子与阴离子通过氢键结合,由于氢键良好的方向性和选择性,对F^-、Ac^-、H₂PO₄^-等有较好的选择性和识别能力,而与其他的阴离子几乎没有作用.     

[Ru(phen)2(H2biim)](PF6)2配合物与阴离子的选择性作用

研究了[Ru(phen)₂(H₂biim)](PF₆)₂(1)与各种阴离子之间的选择性作用, 发现配合物1与Cl^-, Br^-, I^-, NO₃^-, HSO₄^-和H₂PO₄^-阴离子之间存在氢键作用. OAc^-阴离子与配合物1作用, 由于强的氢键作用使H₂biim上的一个H转移到OAc^-上, 使配合物1脱去一个质子, 形成{[Ru(phen)₂(H₂biim)](OAc)}结合体, 溶液颜色由黄色变为橙棕色. 由于F^-能形成非常稳定的HF₂^-, 配合物1逐步脱去2个质子, 溶液颜色由黄色变为紫色, 因此可作为裸眼检测阴离子的识别剂.     

1,10-邻菲啰啉并咪唑衍生物阴离子受体的合成及识别性能

设计合成了2个1,10-邻菲啰啉并咪唑衍生物阴离子受体2-(2-羟基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(1)和2-(2-羟基-5-溴苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(2), 受体2的结构由X射线单晶衍射分析确证. 通过紫外-可见光谱滴定及 ¹H NMR滴定研究了这2个受体对F^-, Cl^-, Br^-, I^-, H₂PO₄^-和AcO^- 6种阴离子的识别传感作用及作用机理. 结果表明, 受体对AcO^-, F^-和H₂PO₄^-有较强的传感作用, 溶液颜色由淡黄色变为黄色; 对Cl^-的作用较弱; 而对Br^-和I^-则无明显作用. 通过机理研究发现, 受体与F^-, H₂PO₄^-和AcO^-形成1: 1的氢键超分子, 当阴离子的量超过受体的1倍以后, 咪唑氮上的氢转移到阴离子; 受体与Cl^-以氢键形成超分子复合物, 而与Br^-和I^-作用很弱.     

基于偶氮水杨醛酰腙的氰根比色检测探针的合成及性能

设计合成了一种基于酚羟基和氨基的酰腙类探针分子, 利用紫外-可见吸收光谱和核磁滴定考察了其对F^-, Cl^-, Br^-, I^-, CH₃COO^-, H₂PO₄^-, HSO₄^-, ClO₄^-, CN^-, SCN^-, SO^2-₄和NO^-₃等阴离子的识别作用. 结果表明, 当加入CN^-离子时主体溶液颜色由无色变为黄色, 而加入其它离子时主体溶液颜色不变, 说明该探针在DMSO/H₂O(体积比5: 5)体系中能选择性裸眼比色检测CN^-. 核磁滴定及质谱数据表明, 该探针与CN^-以1:1化学计量比结合, 该过程通过亲核加成方式完成.     

一种新型比色荧光双通道水相检测氰根离子的化学传感器

合成了一种新型的,能在含水介质中比色荧光双通道单一选择性识别CN^-的传感器分子1-羟基萘甲叉酰肼乙基-3-羟基萘甲叉酰肼甲基苯并咪唑溴鎓盐(J1)。 在J1的DMSO/H₂O (体积比3:2)HEPES 的缓冲体系(pH=7.2)中分别加入F^-、Cl^-、Br^-、I^-、AcO^-、HSO₄^-、ClO₄^-、H₂PO₄^-、SCN^-和CN^-等阴离子后,只有CN^-的加入会使得溶液颜色发生明显的变化,由无色变为深黄色。 相应地在J1的DMSO/H₂O (体积比4:1)HEPES的缓冲体系(pH=7.2)中加入CN^-,溶液发出明亮的黄色荧光。 这一识别过程,不会受到其它阴离子的干扰。 紫外-可见光谱的最低检测限为1.57×10^-7 mol/L,检测线性范围为3.875×10^-4~2.15×10^-2 mol/L。 荧光光谱的最低检测限为4.63×10^-6 mol/L,检测线性范围为0.8×10^-4~1.60×10^-3 mol/L。 此结果表明,J1是一种良好的用于识别 CN^-的化学传感器,在含水介质中对CN^-具有选择性好、灵敏度高以及抗干扰性强的识别性能。 与此同时,基于J1对于CN^-的高选择性识别我们制备了CN^-的检测试纸,该试纸能够方便、快捷、准确地检测水中的CN^-。     

离子色谱法同时测定饮水中9种阴离子

建立离子色谱抑制电导检测法同时测定饮水中F^-、Cl O₂^-、Cl^-、NO₂^-、Cl O₃^-、Br^-、NO₃^-、H₂PO₄^-和SO₄^2-9种阴离子的方法。采用SH-AP-2型阴离子交换柱为分离柱，以4.0 mmol/L Na₂CO₃-4.0 mmol/L Na HCO₃溶液为淋洗液，流量为0.80 m L/min，采用等度洗脱方式将9种阴离子完全分离，利用抑制电导检测。Cl O₂^-、Cl O₃^-的质量浓度在0.05～2.0 mg/L范围内，SO₄^2-     

Highly effective fluorescent sensor for H2PO4(-)

A new anthracene dimer connected by two imidazolium moieties has been systematically designed and synthesized as a fluorescent chemosensor for selective binding of H(2)PO(4)(-) over other anions, which have been examined using fluorescence and (1)H NMR and rationalized with ab initio study.     

A naphthalimide–calixarene as a two-faced and highly selective fluorescent chemosensor for Cu or F

A new naphthalimide–calix[4]arene was synthesized as a two-faced and highly selective fluorescent chemosensor for Cu²⁺ or F⁻. This chemosensor displayed a selective fluorescence quenching effect only with Cu²⁺ among the various metal ions. On the other hand, among the various anions, the title chemosensor displayed a selective fluorescence quenching effect only with F⁻. The binding mode with F⁻ was further investigated using fluorescence changes and ¹H NMR experiments.     

Fluorescent sensing of anions with acridinedione based neutral PET chemosensor

Newly synthesised fluorescent chemosensor ADDTU contains the thiourea receptor connected to the acridinedione (ADD) fluorophore via a covalent bond, giving rise to a fluorophore-receptor motif. In this fluorescent chemosensor, the anion recognition takes place at the receptor site which result in the concomitant changes in the photophysical properties of a ADD fluorophore by modulation of photoinduced electron transfer (PET) process. The binding ability of these sensor with the anions F(-), Cl(-), Br(-), I(-), HSO(4)(-), ClO(4)(-), AcO(-), H(2)PO(4)(-) and BF(4)(-) (as their tetrabutylammounium salts) in acetonitrile were investigated using UV-vis, steady state and time-resolved emission techniques. ADDTU system allows for the selective fluorescent sensing of AcO(-), H(2)PO(4)(-) and F(-) over other anions in acetonitrile.     

Highly effective phosphate electrochemical sensor based on tetrathiafulvalene

A neutral electrochemical chemosensor based on TTF exhibited high selectivity for H2PO4- over a wide range of anions and the significant C-H...O hydrogen bonding between C=C-H of the TTF unit and H2PO4- played an important role in regulating the selectivity.     

A retrievable and highly selective fluorescent probe for monitoring sulfide and imaging in living cells

A novel selective fluorescent chemosensor based on an 8-hydroxyquinoline-appended fluorescein derivative (L1) was synthesized and characterized. Once combined with Cu(2+), it displayed high specificity for sulfide anion. Among the various anions, only sulfide anion induced the revival of fluoresecence of L1, which was quenched by Cu(2+), resulting in "off-on"-type sensing of sulfide anion. What's more, the sensor was retrievable to indicate sulfide anions with Cu(2+), and S(2-), in turn, increased. With the addition of Cu(2+), compound L1 could give rise to a visible pink-to-yellow color change and green fluorescence quenching. The resulting yellow solution could change to pink and regenerate to green fluorescence immediately upon the addition of sulfide anion; however, no changes were observed in the presence of other anions, including CN(-), P(2)O(7)(4-), and other forms of sulfate, making compound L1 an extremely selective and efficient sulfide chemosensor. The signal transduction occurs via reversible formation-separation of complex L1Cu and CuS. What's more, the biological imaging study has demonstrated that the chemosensor can detect sulfur anions in biological systems at a relatively low concentration.     

Zinc(II) and PPi selective fluorescence OFF-ON-OFF functionality of a chemosensor in physiological conditions

A fluorescent chemosensor based on a quinoline derivative, L(2) (OFF state), selectively senses Zn(2+) by effective chelate-enhanced fluorescence (ON state), which further shows selectivity toward PPi over competing anions like Pi, AMP, and ATP via fluorescence quenching (OFF state) in a 100% aqueous HEPES buffer (pH 7.4). A plausible mode for the selective binding of PPi to 1 has been demonstrated by quantum mechanical density functional theory calculations and high-resolution mass spectrometry analysis.     

水溶液中对Cr~(3+)高选择性荧光化学传感器的研究

设计了一种新型的Cr3+荧光化学传感器.通过荧光光谱滴定实验研究了其对Li+,Na+,K+,Zn2+,Co2+,Ni 2+,Cu2+,Fe2+,Mn2+,Al 3+,Fe3+和Cr3+等不同金属离子的选择性识别能力,结果表明,该传感器在生理pH=7.4的HEPES中对Cr3+表现出较高的选择性,并与Cr3+形成1∶1配合物,主客体相互作用荧光猝灭的络合常数为(7.80±0.34)×103.     

Photophysical studies of anion-induced colorimetric response and amplified fluorescence quenching in dipyrrolylquinoxaline-containing conjugated polymers

The dipyrrolylquinoxaline (DPQ)-containing monomer and polymers were synthesized and employed as chromogenic and fluorescent chemosensors for inorganic anions. We have found that in the presence of fluoride or pyrophosphate, the receptors do not form hydrogen bonds between the pyrrole protons and anions. The colorimetric responses and fluorescence quenching in these chemosensors are indeed the result of deprotonation of the N-H proton. The anion selectivity is primarily determined by the relative basicity of anions. The sensitivity of DPQ-based chemosensor was found to display a 34-fold enhancement by incorporation into the conjugated polymer. The anion-induced deprotonation generates low-energy, non-fluorescent trapping sites and is responsible for the signal amplification where the quenching of the excited state occurs from the deprotonated DPQ site in the network by rapid exciton migration along the polymeric backbone.