含脲苯并咪唑类离子液体的合成及阴离子识别性能

设计并合成了含脲苯并咪唑离子液体受体分子1~3, 利用紫外-可见光谱、 荧光光谱和 ¹H NMR滴定研究了其对F^-, Cl^-, Br^-, I^-, CH₃COO^-, HSO₄^-, H₂PO₄^-等阴离子的识别性能. 紫外-可见光谱研究发现, 受体分子1~3可选择性地识别F^-, 并形成1: 1型主客体配合物; 荧光光谱研究发现, 受体分子1~3对碱性阴离子有较好的识别作用, 主客体结合常数的顺序为H₂PO₄^->CH₃COO^-≈ F^->HSO₄^- ≈ Cl^->Br^- ≈ I^-; ¹H NMR滴定研究发现, 该类受体分子以咪唑2位CH和脲基NH与阴离子通过氢键结合, 但高浓度的F^-会导致受体分子发生脱质子作用.     

2-羟基-1-萘醛缩2-氨基-4-硝基苯酚亚胺的合成及其阴离子识别性能

以2-羟基-1-萘醛和2-氨基-4-硝基苯酚为原料,通过缩合反应合成了阴离子识别受体2-羟基-1-萘醛缩2-氨基-4-硝基苯酚亚胺（R）,其结构经¹H NMR, ¹³C NMR和IR表征。采用UV-Vis和¹H NMR等研究了受体R对阴离子的识别性能。结果表明：受体R在乙腈中对F^-、 H₂PO₄^-和AcO^-表现出良好的UV0Vis识别能力,且对上述阴离子表现出裸眼识别性能。通过核磁滴定、紫外滴定、络合常数及Job曲线等对受体R的识别机理进行了研究。结果表明：受体R与阴离子通过分子间氢键结合形成主客体配合物,对F^-具有更好的结合能力（络合常数为2.503 × 10⁴ L/mol）,与阴离子以比例1/1相互结合。     

1,10-邻菲啰啉并咪唑衍生物阴离子受体的合成及识别性能

设计合成了2个1,10-邻菲啰啉并咪唑衍生物阴离子受体2-(2-羟基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(1)和2-(2-羟基-5-溴苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(2), 受体2的结构由X射线单晶衍射分析确证. 通过紫外-可见光谱滴定及 ¹H NMR滴定研究了这2个受体对F^-, Cl^-, Br^-, I^-, H₂PO₄^-和AcO^- 6种阴离子的识别传感作用及作用机理. 结果表明, 受体对AcO^-, F^-和H₂PO₄^-有较强的传感作用, 溶液颜色由淡黄色变为黄色; 对Cl^-的作用较弱; 而对Br^-和I^-则无明显作用. 通过机理研究发现, 受体与F^-, H₂PO₄^-和AcO^-形成1: 1的氢键超分子, 当阴离子的量超过受体的1倍以后, 咪唑氮上的氢转移到阴离子; 受体与Cl^-以氢键形成超分子复合物, 而与Br^-和I^-作用很弱.     

邻-二(吡咯-2-甲酰胺基)亚苯的合成、晶体结构及阴离子识别

设计合成了邻-二(吡咯-2-甲酰胺基)亚苯.用X射线单晶衍射研究了该化合物的固态构象,发现其可以通过氢键与DMSO发生络合.¹HNMR研究发现该化合物即使在强极性的DMSO溶液中也可对F^-,Cl^-和H₂PO₄^-常见阴离子产生一定的识别,其中对F-的识别为最优.     

基于咪唑的荧光传感器对磷酸二氢根离子的高选择性识别

设计并合成了基于咪唑基团的高选择性的荧光传感器, 分别利用荧光和紫外-可见光谱研究了其对阴离子的识别. 结果显示, 该类荧光传感器只在H₂PO₄^-离子存在下发生显著的荧光猝灭现象, 并且产生一个新的荧光发射峰, 因此可用于乙腈溶液中H₂PO₄^-的快速有效检测.     

基于蒽-苯并咪唑鎓的荧光传感器对H2PO4-的高选择性识别

设计合成了基于蒽-苯并咪唑鎓的受体分子1和2,通过荧光发射光谱研究了受体分子1和2对F^-、Cl^-、Br^-、I^-、AcO^-、HSO₄^-、H₂PO₄^-、NO₃^-、ClO₄^-等阴离子的识别性能。 研究发现,在受体分子1和2的乙腈溶液(5.0×10^-6 mol/L)中加入10倍化学计量的H₂PO₄^-时,受体分子1的荧光猝灭百分数为13%,受体分子2的荧光猝灭百分数高达94%,表明受体分子2在构型上与H₂PO₄^-更匹配,可作为H₂PO₄^-的荧光关闭型(turn-off)探针。 受体分子2与H₂PO₄^-的结合比为1:1,结合常数为(3.70±0.16)×10⁴ L/mol,检出限为3.77×10^-6 mol/L。     

以黄酮冠醚金属配合物为基体的阴离子化学敏感器

合成了两种以新型黄酮类冠醚化合物(L)为配体的金属配合物[Ca(L)]²⁺(1)或[Mg(L)]²⁺(2).对其在乙腈溶液中与阴离子间的相互作用进行了研究.当这种化学敏感器和HSO₄^-或H₂PO₄^-阴离子相互作用时,可观察到强烈的颜色变化.UV光谱滴定实验表明,配合物1(或2)和HSO₄^-间形成了1:1的稳定配合物.配合物1(或2)对于HSO₄^-或H₂PO₄^-阴离子也可用荧光光谱法进行选择性检测,较UV方法有更高的灵敏度.还提出了配合物1(或2)与阴离子间通过两点结合方式,构成新的配合物可能结构的建议.通过色调变化和荧光测定的方法进行研究,结果表明,带有染料分子的金属配合物可用作为有效识别和检测阴离子的敏感器件.     

间苯二甲酰腙分子钳的合成及阴离子识别研究

设计合成了3种新型间苯二甲酰腙类化合物,利用UV-Vis及¹H NMR考察了其与F^-、Cl^-、Br^-、I^-、CH₃COO^-、HSO₄^-、H₂PO4-、ClO4-阴离子的相互作用。结果表明,主体分子4a(双对硝基苯并呋喃甲醛间苯二甲酰腙)在DMSO溶液中对F-和CH₃COO-有显著识别效果,溶液颜色由黄色变为深黄色和棕红色。通过¹H NMR滴定及质子溶剂效应进一步证明,主体分子与阴离子之间是以氢键作用方式相结合。Job曲线表明,主客体间形成1：1型氢键络合物。基于实验结果,探讨了主客体间形状和大小匹配对识别能力的影响以及主客体之间的识别模式。     

亚胺型比色探针的制备及阴离子识别性能研究

合成了两种亚胺型阴离子识别受体:2-[(2-羟基-5-硝基亚苄基)氨基]-4-硝基苯酚(R1)和2-[(蒽-9-亚甲基)氨基]-4-硝基苯酚(R2),其结构经核磁氢谱和红外表征。在紫外光谱实验中,受体R1和R2分别在乙腈和DM SO溶液中可以高选择性识别F^-,AcO^-和H₂PO₄^-,同时观察到明显的颜色改变。实验结果表明,受体R1和R2分别与阴离子形成的络合常数均在1.703×10⁴L/mol之上,并且分别与F-形成1∶1型氢键络合物。通过¹H NMR滴定实验及理论计算阐述了阴离子识别过程机理的可行性。     

一类以光度法进行检测的新型阴离子敏感化合物

对6种带羟基的分子内电荷转移化合物(其中化合物1,4,5,6含氰基基团)及与不同阴离子间的相互作用及其分子识别进行了研究.发现化合物2,3,5,6均对F^-离子有优良的检测能力,并对H₂PO₄^-有一定的响应能力,其中化合物2对AcO^-离子也有一定的响应.对实验结果进行了初步讨论,并对提高敏感化合物的灵敏度和选择性提出了看法.     

多分支中性受体的合成及αω-二羧酸阴离子识别研究

Two new multi-armed neutral receptors 1 and 2 containing thiourea and amide groups were synthesized by simple steps in good yields. Receptors 1 and 2 have a better selectivity and higher association constants for malonate anion than other anions examined by the present work. In particular, distinct color changes were observed upon addition of dicarboxylate anions to the solution of 1 in DMSO. The UV-Vis and fluorescence spectra data indicate that a 1 ： 2 stoichiometry complex was formed between compound 1 or 2 and dicarboxylate anions of shorter carbon chain, and a 1 ： 1 stoichiometry complex was formed between compound 1 or 2 and dicarboxylate anions of longer carbon chain through hydrogen bonding interactions.     

Solid-state transformation of [Co(NCS)2(pyridine)4] into [Co(NCS)2(pyridine)2]n: from Curie-Weiss paramagnetism to single chain magnetic behaviour

Reaction of Co(NCS)(2) with pyridine (pyr) in aqueous solution at room temperature leads to the formation of the pyridine-rich 1:4 compound of composition [Co(NCS)(2)(pyridine)(4)] (1) reported recently. On heating, the pyridine-rich 1:4 compound transforms into its corresponding pyridine-deficient 1:2 compound of composition [Co(NCS)(2)(pyridine)(2)](n) (2), which decomposes on further heating. In the crystal structure of compound 2 the metal cations are coordinated by four N-atoms of two pyridine ligands and two N-bonded thiocyanato anions, each in mutually trans orientation, and by two S-atoms of two adjacent thiocyanato anions in a slightly distorted octahedral geometry. The thiocyanato anions bridge the metal cations forming one-dimensional polymeric chains. IR spectroscopic investigations on the pyridine-deficient 1:2 compound prepared in thermal decomposition are in accordance with bridging thiocyanato anions. Magnetic measurements of the pyridine-rich 1:4 compound and pyridine-deficient 1:2 compound reveal different behaviour with Curie-Weiss paramagnetism for compound 1 and single chain magnetic behaviour for compound 2, with a Mydosh-parameter φ = 0.12 and an effective energy barrier (-U(eff)/k(B)) of 62.5 K for the spin relaxation.     

三(2-吡啶甲基)胺的钌(Ⅱ)配合物的阴离子识别性能

以三(2-吡啶甲基)胺(tpa)作为螯合配体,合成了配合物[Ru(tpa)(H2biim)].(ClO4)2(1;H2biim=2,2′-联咪唑);利用紫外-可见吸收光谱仪和核磁共振谱仪研究了合成的配合物与Cl-、Br-、I-、NO3-、HSO4-、H2PO4-、OAc-、F-离子之间的作用.结果表明,配合物1与Cl-、Br-、I-、NO3-、HSO4-、H2PO4-之间存在氢键作用;当OAc-阴离子与1作用时,强的氢键作用使H2biim上的一个H转移到OAc-上,使1脱去一个质子,溶液颜色由浅黄绿色变为橘色.而F-能形成非常稳定的HF2-,可使配合物1联咪唑上的两个质子逐步脱去,相应的溶液颜色由浅黄绿色变为橘色,最终变为红色.因此,合成的配合物可以对多种阴离子实现目视识别.     

New cadmium thio- and selenocyanato coordination compounds: structural snapshots on the reaction pathway to more condensed anionic networks

In this contribution several new coordination compounds on the basis of cadmium(II) thio- and selenocyanate with pyrimidine as co-ligand were prepared and investigated for their structural, thermal and spectroscopic properties. The reaction of cadmium(II) thiocyanate with pyrimidine leads to the formation of four compounds, which from a structural point of view are closely related. In the most pyrimidine-rich 1 : 2 compound [Cd(NCS)(2)(pyrimidine)(2)](n) (1A) (1 : 2 = ratio between metal salt and the co-ligand pyrimidine) the Cd cations are linked by the pyrimidine ligands into layers and are additionally coordinated by two terminal N-bonded anions. In the 2 : 3 compound {[Cd(NCS)(2)](2)(pyrimidine)(3)}(n) (1B) the Cd cations are linked into chains by μ-1,3 bridging thiocyanato anions, which are connected into layers by only half of the pyrimidine ligands, whereas the other co-ligands are only terminal coordinated. Further reduction of the pyrimidine content leads to the formation of the 1 : 1 2D compound [Cd(NCS)(2)(pyrimidine)](n) (1CI) in which the terminal N-bonded thiocyanato anions become bridging. Surprisingly, crystallization experiments lead to the formation of an additional pyrimidine-deficient intermediate of composition {[Cd(NCS)(2)](3)(pyrimidine)(2)}(n) (1D), in which some of the μ-1,3 coordinated anions transform into μ-1,1,3 bridging thiocyanato anions. Consequently the four structures can be used as snapshots of intermediates on the way to a more condensed thiocyanato coordination network. In contrast, with cadmium selenocyanate only two different compounds were obtained. The 1 : 2 compound [Cd(NCSe)(2)(pyrimidine)(2)](n) (2A) is not isotypic to 1A and shows a completely different coordination topology whereas the pyrimidine-deficient 1 : 1 compound (2B) shows a more condensed network with μ-1,3 coordinating selenocyanato anions. On heating, the 1 : 2 compound 1A decomposes into Cd(NCS)(2)via a new polymorphic modification (1CII) as intermediate which is metastable, whereas the 1 : 2 selenocyanato compound 2A transforms into the 1 : 1 compound 2B on heating which cannot be obtained phase pure under these conditions. If faster heating rates are used, there are indications for the formation of a 3 : 2 compound, which is amorphous to X-rays. The results are compared with those obtained for related thio- and selenocyanato coordination polymers with pyridine, pyridazine and pyrazine as co-ligand. Moreover, their impact on the structures and thermal reactivity of analogous paramagnetic compounds is discussed in detail. Based on the structural data of compound 1D the unknown structures of two intermediates were determined, which are formed in the thermal decomposition reaction of the Mn and Fe thiocyanato pyrimidine coordination polymers, reported recently.     

A Hybrid Coumarin–Thiazole Fluorescent Sensor for Selective Detection of Bisulfite Anions in Vivo and in Real Samples

A hybrid coumarin–thiazole compound was developed as a novel ratiometric and colorimetric sensor for bisulfite anions. Structure identification of the compound was confirmed by ¹H NMR, ¹³C NMR, ¹H,¹H COSY, heteronuclear single quantum coherence (HSQC), IR, and HRMS spectroscopy. The detection of bisulfite anions was performed through the Michael addition of the bisulfite anion toward the hybrid coumarin–thiazole sensor. The reaction between the sensor and bisulfite anion caused the fluorescence intensity to decrease at 600 nm and to increase at 450 nm and simultaneously yielded a visible color change from purplish red to colorless because the π conjugation between thiazole and coumarin was blocked. The sensor possessed high selectivity and sensitivity for bisulfite with respect to other common anions in aqueous solution. Moreover, the practical value of this sensor was confirmed by its application in the detection of bisulfite anion in human breast adenocarcinoma cells and granulated sugar.     

Colorimetric and fluorescent sensing of biologically important fluoride in physiological pH condition based on a positive homotropic allosteric system

A novel positive homotropic allosteric system 1 based on 3-methylpyrozole-5-one-4-one-2′,4′-dinitrophenylhydrazone was designed, synthesized and characterized. Colorimetric and fluorescent sensing of anions was achieved in physiological condition (pH 7.4), resulting from the positive homotropic allosterism of 1 induced by anions tested. In particular, the compound 1 exhibited a two-step response to the strong basic anions such as F⁻. In the first step, the hydrazone form of 1 interacted with anions through hydrogen bonding with an obvious color change from yellow to orange upon addition of 0.3 equiv. of anions. In the second step, with further addition of anions, the hydrazone form of 1 was shifted to the azophenol form, whose anion binding was accompanied with an orange-to-purple color change. In addition, the receptor 1 exhibited a fluorescent enhancement response to anions exploiting two possible signaling transduction mechanisms: (1) inhibition of photoinduced electronic transfer (PET) and (2) binding-induced rigidity of the host molecule.     

A retrievable and highly selective fluorescent probe for monitoring sulfide and imaging in living cells

A novel selective fluorescent chemosensor based on an 8-hydroxyquinoline-appended fluorescein derivative (L1) was synthesized and characterized. Once combined with Cu(2+), it displayed high specificity for sulfide anion. Among the various anions, only sulfide anion induced the revival of fluoresecence of L1, which was quenched by Cu(2+), resulting in "off-on"-type sensing of sulfide anion. What's more, the sensor was retrievable to indicate sulfide anions with Cu(2+), and S(2-), in turn, increased. With the addition of Cu(2+), compound L1 could give rise to a visible pink-to-yellow color change and green fluorescence quenching. The resulting yellow solution could change to pink and regenerate to green fluorescence immediately upon the addition of sulfide anion; however, no changes were observed in the presence of other anions, including CN(-), P(2)O(7)(4-), and other forms of sulfate, making compound L1 an extremely selective and efficient sulfide chemosensor. The signal transduction occurs via reversible formation-separation of complex L1Cu and CuS. What's more, the biological imaging study has demonstrated that the chemosensor can detect sulfur anions in biological systems at a relatively low concentration.     

The synthesis and anions complexation property of novel biscalixarene: dumbbell shaped biscalix[4]-1,3-aza-crown

By reacting calix[4]-1,3-aza-crown 2 with 1,6-diisocyanatohexane in “1+2” condensation mode, the first example dumbbell shaped biscalix[4]-1,3-aza-crown 3 was conveniently prepared in yield of 94%. The complexation properties of compound 3 were investigated by UV–vis spectra and ¹H NMR experiments. The results showed that compound 3 has good complexation abilities for anions. Compound 3 binded monoacidic anions with 1:2 binding-stoichiometry and binded binary acidic anions with 1:1 binding-stoichiometry.     

Synthesis under Micromave Irradition and Crystal Structure of 4''-Acetylbenzo-15 -crown-5thiosemicarbazone

The title compound is a bifunctional receptors including a thiourea group and a crown ether ring. Due to many possible potentials as a new class of reagents for membrane transports,ion-selective electrodes as well as reaction catalysts, the design and synthesis of bifunctional receptors for simultaneous binding of cations and anions is of ongoning interest in srprarnolecular chemistry1-5. In bifunctional receptors, the binding sites for anions and cations are covalently linked so as to exhibit allosteric or cooperative complexation where the binding affinity for anions(cations)is modified as a result of the cation(anion) complexation.Literature[6] reported that the ability of the thiourea group to bind anions is significantly enhanced when Na+ is bound to the crown moiety. To date, however only a few receptors of this class have been reported.6-8In this paper, we report an improved procedure under microwave irradiation that gives higher yields of title compound and needs fewer reaction times than traditional method.The structure of this compound was determined by IR ,element analysis and X-ray analysis.Scheme 1 The reaction equationThe crystal belongs to triclinic crystal system, P-1 space group, a=0.9547(0)nm, b=1.3637(3)nm,c=1.6029(3)nm, α =75.33(3) , β =83.62(3) , γ =70.99(3) ,Z=4,Dc=1.335g/cm3,F(000)=816,R1= 0.0557 ,wR2=0.1281. It is assembled into a three-dimensionalsupramolecule by intermolecular hydrogen bonds.