固相表面荧光光谱法在药物分析中的应用

本文综述了近十年来固相表面荧光光谱法、固相萃取-固相表面荧光联用技术以及流动注射分析、顺序注射分析和可更新表面技术与固相表面荧光联用技术在药物分析中的应用.展望了固相表面荧光光谱法在药物分析中的发展趋势和前景.     

Phenomenological study on heat and mass coupling mechanism of waxy crude oil pipeline transport process

Based on the phase equilibrium model of the paraffin wax precipitation in the process of oil pipeline transportation, theory and method of non-equilibrium thermodynamics were applied to obtain the linear phenomenological equations for the cross-interaction of heat and mass transfer during pipeline transport, which were derived from the irreversible entropy production rate equation. Then, the analysis of the irreversible heat flow and the mass flow were carried out, and the mathematical expressions of the phenomenological coefficient of liquid phase, the phenomenological coefficient of solid phase flow, and the heat flow phenomenological coefficient were obtained. Taking a waxy crude oil transportation pipeline in Daqing Oilfield as an example, based on the analysis of liquid–solid phase equilibrium, the irreversible linear phenomenological mechanism of heat and mass coupling in waxy crude oil pipeline transportation was analyzed in detail from three levels: phenomenological coefficients which reflect characteristic of the effect of force on flow in heat and mass transfer; thermodynamic forces which trigger heat and mass transfer; transmitted heat and mass flow density, providing a theoretical basis for the further study of the wax deposition in the process of pipeline transportation.     

Application of polyurethane foam as a sorbent for trace metal pre-concentration — A review

The first publication on the use of polyurethane foam (PUF) for sorption processes dates back to 1970, and soon after the material was applied for separation processes. The application of PUF as a sorbent for solid phase extraction of inorganic analytes for separation and pre-concentration purposes is reviewed. The physical and chemical characteristics of PUF (polyether and polyester type) are discussed and an introduction to the characterization of these sorption processes using different types of isotherms is given. Separation and pre-concentration methods using unloaded and loaded PUF in batch and on-line procedures with continuous flow and flow injection systems are presented. Methods for the direct solid sampling analysis of the PUF after pre-concentration are discussed as well as approaches for speciation analysis. Thermodynamic proprieties of some extraction processes are evaluated and the interpretation of determined parameters, such as enthalpy, entropy and Gibbs free energy in light of the physico-chemical processes is explained.     

移动床热煤气脱硫气固反应过程模拟——Ⅱ-错流移动床非催化气固反应过程模拟

基于前文错流移动床反应器模型方程,模拟计算并分析了该类反应器中气、固相流动对热煤气脱硫等非催化气固反应过程的影响。研究表明,床层在床深方向按反应速率的快慢可分为粗脱区和精脱区,在颗粒流动方向上气相浓度差异较大,并主要体现在粗脱区内,床层出口处颗粒转化率呈现较大分布,反应器内气固交错流动、气相浓度和颗粒转化率共同作用（ 于气固反应速率） 等因素是造成过程特征的主要因素。因此反应器优化应满足对两相流动的优化,将粗脱区设置成错流移动床而精脱区设置成固定床,并使粗脱区内颗粒流速沿气流方向逐渐减小,以减小出口颗粒转化率的分布并提高颗粒利用率,同时沿颗粒流动方向应逐渐减小过床气流体积分率以利于床内气固反应速率的均一分布。由此指出对该类床型其底部渐缩下料段和过床气流对床内颗粒流动的影响以及床层结构及颗粒流动对过床气流分布的影响研究的必要性。     

Recent trends in solid phase spectrometry: 2003-2009. A Review

Around 100 papers published from 2003 to the present are reviewed concerning analytical methods for the direct light measurement of a solid phase in which a target colored or fluorescent analyte is concentrated. Recent attention has been paid to the development of flow injection-solid phase spectrometry as a simple and inexpensive tool for routine analysis of organic compounds or pharmaceuticals. Due to some improvements in flow injection analysis, such as sequential injection and lab-on-a-valve, it is possible not only to reduce the reagent consumption but also to devise fully automatic and miniaturized systems with minimal maintenance needs. This may have the potential of becoming one of the green analytical methods. Flow injection-solid phase spectrometry is expected to be applied to the speciation of trace chemical components (e.g., specific determination of trace metal ions in different existent oxidation states) in real samples in the environment.     

Analysis of lignans in Magnoliae Flos by turbulent flow chromatography with online solid‐phase extraction and high‐performance liquid chromatography with tandem mass spectrometry

In this study, a method coupling turbulent flow chromatography with online solid‐phase extraction and high‐performance liquid chromatography with tandem mass spectrometry was developed for analyzing the lignans in Magnoliae Flos. By the online pretreatment of turbulent flow chromatography solid‐phase extraction, the impurities removal and analytes concentration were automatically processed, and the lignans were separated rapidly and well. Seven lignans of Magnoliae Flos including epieudesmin, magnolin, 1‐irioresinol‐B‐dimethyl ether, epi‐magnolin, fargesin aschantin, and demethoxyaschantin were identified by comparing their retention behavior, UV spectra, and mass spectra with those of reference substances or literature data. The developed method was validated, and the good results showed that the method was not only automatic and rapid, but also accurate and reliable. The turbulent flow chromatography with online solid‐phase extraction and high‐performance liquid chromatography with tandem mass spectrometry method holds a high potential to become an effective method for the quality control of lignans in Magnoliae Flos and a useful tool for the analysis of other complex mixtures.     

固相萃取

近１０多年来,固相萃取作为试样预处理技术得到迅速的发展。评述了该技术的特点、装置、方法的建立,应用和前景。文中强调固相萃取在环境分析、药物分析等方面有广泛的应用前景,并总结了近年来固相萃取在药物分析中的应用。     

Simulation of nonstationary processes in solid electrolyte electrochemical cells for the pulsed mode of gas composition variations

Studying processes that occur in solid electrolyte electrochemical cells when the working electrode is subjected to an impact of the reactive gas medium are of interest for both their practical application and the understanding of mechanisms of these processes. There are grounds to assume that the methods of studying the processes on electrodes by subjecting the latter to chemical pulses provide more information as compared with the conventional methods based on electric perturbations. A computer simulation of nonstationary processes in a solid electrolyte electrochemical cell of the flow-through kind is carried out. The model of these processes takes into account the transport of electrochemically active components in the gas phase, the kinetics and statics of adsorption of these substances on the gas/electrode interface, and the kinetics of electrode reactions including chemical and charge-transfer stages. Time dependences of concentration fields are calculated as well as the integral characteristics of flows, namely, the oxygen flow from the gas phase to the electrode, the oxygen flow from the electrode to the solid electrolyte, and the flow of the electrochemically active component at the cell outlet.     

The Use of Chelating Solid Phase Materials in Flow Injection Systems: A Review

Flow injection analyses facilitate faster, inexpensive, and more environmentally friendly sample-preparation techniques than many traditional “wet chemistry” methods, and the use of flow injection has, therefore, expanded significantly in recent years. This review focuses on chelating solid phase materials, which have been used in flow injection analyses and also describes important information, such as type of chelating groups, the type of stationary phases, and their efficiency at pre-concentrating metal ions. Discussions of the improvement of the sensitivity and of improving limit of detection, as well as the efficiency with which concomitant ions are removed for the flow injection methods using chelating solid phase materials, are also made.     

全氟辛烷磺酸水样的前处理技术及固相微萃取剂的研究进展

全氟辛烷磺酸及其盐(PFOS)广泛应用于纺织品、皮革、家具等上千种工业和日用生活用品的生产中,由于具有多脏器毒性,被列为继多氯联苯、有机氯农药和二噁英之后的又一种新型持久性有机污染物.因此,PFOS的准确监测对环境PFOS污染的预警预报具有重要的意义.PFOS在样品中含量低,因此样品前处理技术是准确分析的关键.本文对目...     

Recent advances and applications of molecularly imprinted polymers in solid‐phase extraction for real sample analysis

Sample pretreatment is essential for the analysis of complicated real samples due to their complex matrices and low analyte concentrations. Among all sample pretreatment methods, solid‐phase extraction is arguably the most frequently used one. However, the majority of available solid‐phase extraction adsorbents suffer from limited selectivity. Molecularly imprinted polymers are a type of tailor‐made artificial antibodies and receptors with specific recognition sites for target molecules. Using molecularly imprinted polymers instead of conventional adsorbents can greatly improve the selectivity of solid‐phase extraction, and therefore molecularly imprinted polymer‐based solid‐phase extraction has been widely applied to separation, clean up and/or preconcentration of target analytes in various kinds of real samples. In this article, after a brief introduction, the recent developments and applications of molecularly imprinted polymer‐based solid‐phase extraction for determination of different analytes in complicated real samples during the 2015‐2020 are reviewed systematically, including the solid‐phase extraction modes, molecularly imprinted adsorbent types and their preparations, and the practical applications of solid‐phase extraction to various real samples (environmental, food, biological, and pharmaceutical samples). Finally, the challenges and opportunities of using molecularly imprinted polymer‐based solid‐phase extraction for real sample analysis are discussed.     

Biodegradable PEO/cellulose‐based solid–solid phase change materials

A series of poly(ethylene oxide) (PEO) blends with cellulose (CEL) or cellulose derivatives—carboxymethyl cellulose (CMC), cellulose acetate (CAC), and cellulose ether (CET)—has been investigated as phase change materials for thermal energy storage. For PEO/CEL blends solid–solid phase transition has been observed in the whole concentration's range; for PEO/CMC and PEO/CET blends solid–solid phase transition has been found for PEO content 25 or 50 and 25 wt%, respectively. Otherwise, solid–liquid phase transition takes place. MTDSC investigations revealed that for PEO/CEL and PEO/CMC blends transition the strongest recrystallization effect (as evidenced by exothermic effect in reversing heat flow) as melting process occurred. FTIR analysis shows a shift of the stretching vibration bands of both the proton‐donor O? H groups from CEL and PEO due to intermolecular hydrogen interactions between the blends' components. Copyright © 2010 John Wiley & Sons, Ltd.     

Advancement of flow-based analysis with alternative chemical reactions and new devices for environmental and biological samples.

This review includes our researches and other methodologies related to flow-based techniques, such as flow injection analysis (FIA) and sequential injection analysis (SIA). The methods will demonstrate semi-and full automated FIA and SIA, including liquid-liquid and liquid-solid extraction. FIA using alternative chemical reactions in the aqueous solution was applied to the trace analysis of metals in biological and environmental samples. For durable liquid-liquid extraction, several phase separators were designed. Moreover, multi-channel FIA with newly designed flow cells and SIA with lab-on-valve devices have been used for the simultaneous and successive determination of metals and organic compounds. On-line solid phase extraction (SPE) has also been proposed for highly sensitive analysis of organic and inorganic compounds.     

On-line electrothermal atomic absorption spectrometry configurations: recent developments and trends

In the present mini-review, an account of the actual state-of-the-art and future possibilities offered by on-line ET-AAS is presented. Topics such as: (1) on-line analyte preconcentration (by means of precipitation, sorption, solvent extraction, and solid phase extraction); (2) analyte separation by means of chromatography, and electrochemical, microdialysis and chemical vapor generation processes; and (3) sample treatment (by microwave sample digestion, sample emulsification and dilution processes) are used to illustrate the versatility of flow injection, sequential injection analysis, stop flow and continuous flow, when coupled to a graphite furnace. The use of some of the on-line systems for speciation and the simultaneous determination of different analytes is underlined.     

两段式气流床煤气化炉内气固流动数值模拟研究

建立了两段式气流床煤气化炉内气固两相流动的三维计算流体力学（CFD）模型，将气体视为连续介质，在Euler坐标系下考察气相的运动；将颗粒视为离散体系，在Lagrange坐标系下研究颗粒的运动。利用所建CFD模型对基本设计尺寸和操作条件下的两段式气流床煤气化炉内气固两相流动进行了模拟，给出了两段式气流床煤气化炉内的气固两相流动的规律和颗粒的分布规律。在此基础上，针对不同的结构(喉口直径变化)和不同的操作条件（两段气固进料量变化）进行了一系列的模拟比较。结果表明，喉口直径的变化对于炉内气固两相流动及颗粒分布有重要影响。随着喉口直径减小，喉口附近区域的气相回流增强，颗粒运动轨线变得更加曲折，颗粒分布发生明显变化。两段气固流量的改变可以明显改变炉内气固流动，随着一段反应区的气固流量增加和二段反应区气固流量减小，一段反应区内的气相回流更加显著， 二段反应区气相回流减弱，颗粒螺旋上升运动增强，反应器边壁处颗粒浓度增大，颗粒沉积现象减弱。     

Applications of solid‐phase micro‐extraction with mass spectrometry in pesticide analysis

Pesticides, widely applied in agriculture, can produce a variety of transformation products and their continuous use causes deleterious effects to ecosystem. Efficient and sensitive analytical techniques for enrichment and analysis of pesticides samples are highly required. Compared with other extraction methods, solid‐phase micro extraction is a solvent free, cost effective, robust, versatile, and high throughput sample preparation technique, especially for the analysis of pesticides from complicated matrices. Coupling of solid‐phase micro extraction with gas chromatography and mass spectrometry and liquid chromatography–mass spectrometry has been extensively applied in pesticide analysis. On the other hand, in recent years, combination of fast separation using solid‐phase micro extraction and rapid detection using ambient mass spectrometry is providing highly efficient pesticide screening. This article summarizes the applications of solid‐phase micro extraction coupled to mass spectrometry for pesticides analysis.     

Application of a thiourea‐containing task‐specific ionic liquid for the solid‐phase extraction cleanup of lead ions from red lipstick,pine leaves,and water samples

Here, task‐specific ionic liquid solid‐phase extraction is proposed for the first time. In this approach, a thiourea‐functionalized ionic liquid is immobilized on the solid sorbent, multiwalled carbon nanotubes. These modified nanotubes packed into a solid‐phase extraction column are used for the selective extraction and preconcentration of ultra‐trace amounts of lead(II) from aqueous samples prior to electrothermal atomic absorption spectroscopy determination. The thiourea functional groups act as chelating agents for lead ions retaining them and so, give the selectivity to the sorbent. Elution of the retained ions can be performed using an acidic thiourea solution. The effects of experimental parameters including pH of the aqueous solution, type and amount of eluent, and the flow rates of sample and eluent solutions on the separation efficiency are investigated. The linear dependence of absorbance of lead on its concentration in the initial solution is in the range of 0.5–40.0 ng/mL with the detection limit of 0.13 ng/mL (3s_b/m, n = 10). The proposed method is applicable to the analysis of red lipstick, pine leaves, and water samples for their lead contents.     

Fluorimetric detector and sensor for flow analysis made of light emitting diodes

Two compact optoelectronic fluorimetric devices operating according to the paired-emitter-detector-diode concept have been developed. The fluorimetric detector, fabricated of three light emitting diodes only, has been applied for the development of fluorimetric optosensor by further integration with sensing solid phase. In these investigations as a model analyte and as a model sensing layer useful for solid phase spectrometry, riboflavin and C18-silica have been chosen, respectively. Both developed analytical devices have been applied for non-stationary fluorimetric measurements performed under conditions of flow injection analysis. The presented flow-through detector and sensor operating under given flow conditions offer riboflavin determination in mg L⁻¹ and μg L⁻¹ ranges of concentration, respectively.     

Versatile method for the detection of covalently bound substrates on solid supports by DART mass spectrometry

Analysis of substrates directly on solid phase resins without the need for separate cleavage conditions remains an outstanding challenge in the field of solid phase synthesis. We now present the first example of simultaneous cleavage and mass spectrometric analysis of peptides from solid supports using direct analysis in real time (DART) mass spectrometry. We have shown that this method is compatible with a diverse array of solid phase resins and is suitable for analysis of both peptides and organic substrates.     

CFD Model of Dense Gas-solid Systems in Jetting Fluidized Beds

ＩｎｔｒｏｄｕｃｔｉｏｎＡｓｍｏｄｉｆｉｃａｔｉｏｎｏｆｇａｓ ｓｏｌｉｄｆｌｕｉｄｉｚｅｄｂｅｄｓ ,ｊｅｔ ｔｉｎｇｆｌｕｉｄｉｚｅｄｂｅｄｓａｒｅｗｉｄｅｌｙｕｓｅｄｉｎａｖａｒｉｅｔｙｏｆｐｈｙｓｉｃａｌａｎｄｃｈｅｍｉｃａｌｐｒｏｃｅｓｓｅｓｂｅｃａｕｓｅｏｆｔｈｅｉｒｇｏｏｄｍｉｘｉｎｇｃｈａｒａｃｔｅｒｉｓｔｉｃｓ ,ｈｉｇｈｈｅａｔａｎｄｍａｓｓｔｒａｎｓｆｅｒｒａｔｅｓ ,ａｎｄｆａｓｔｃｈｅｍｉｃａｌｒｅａｃｔｉｏｎ .Ｈｏｗｅｖｅｒ ,ｔｈｅｌａｃｋｏｆｃｏｍｐｌｅｔｅｕｎｄｅｒｓｔａ…