In2O3八面体的碳还原法制备及其发光性能研究

In₂O₃ octahedrons were synthesized by carbothermal reduction using In₂O₃ nanoparticles as the source material. The as-synthesized products were characterized by X-ray powder diffraction (XRD), energy dispersive X-ray(EDX), scanning electron microscopy(SEM), transmission electron microscopy(TEM), high-resolution transmission electron microscopy (HRTEM), selected-area electron diffraction analysis(SAED) and Room-temperature photoluminescence(PL) spectroscopy. The results show that the products are single-crystalline In₂O₃ octahedrons, the length of the octahedrons is in the range of 400～3 000 nm; the PL patterns display two peaks located at 447nm and 555 nm upon excitation at 380 nm, and the other two peaks located at 444 nm and 550 nm upon excitation at 325 nm; the excitation pattern shows two peaks located at 274 nm and 371 nm, respectively. The growth mechanism of the In₂O₃ octahedrons is discussed, and the high supersaturation ratio is considered as the key factor.     

球形Gd2O3∶Eu纳米发光材料的制备

Spherical nanometer Gd₂O₃∶Eu luminescent materials were prepared by homogeneous precipitation method, and the properties were studied also. TG, FTIR and XRD analysis showed that the precursor was carbonate, the cubic Gd₂O₃was obtained after calcination. TEM photographs indicated that the samples were spherical and well dispersed with nanometer and submicrometer size of 200～300 nm which is the nanoparticles’ aggregate. The mechanics of agglomerating growth is also discussed. ED photograph showed that the particle was crystalline. The PL analysis exhibited that CTB band of nanometer Gd₂O₃∶Eu was of 17 nm red shift to bulk materials, and the emission peak was broadened due to the surface and interface effect of nanocrystals.     

LB膜诱导Ba(NO3)2晶体取向生长

In this work, Ba(NO₃)₂ crystals with single crystal face were induced by using the the method of bio-mimetic mineralization and double LB films of behenic acid (BA) as the template. The crystals were characterized by Scanning Electron Microscope (SEM) and X-Ray Diffraction (XRD). The crystals were observed in regular square shape with uniform size about 5～8 μm by SEM, and they were found by XRD to grow along the (111) plane. From these experiments, we can conclude that the good selection of the (111) crystal face of Ba(NO₃)₂ is due to the electrostatic interactions , the match between this crystal face and the definite lattice structure of the LB films.     

有机体系中电合成纳米PbTiO3粉体及表征

The precursor PbTi(OCH₂CH₃)_6-y(acac)_y for the mixed oxide PbTiO₃was synthesized by electrochemical dissolution of Lead and Titanium with a 1∶2 electricity quality in ethanol and acetyl-acetone solution. Nano-sized PbTiO₃powder was prepared by drying and calcining the xerogel from a direct sol-gel hydrolyzation of the precursor solution under pH of 8.5. The FTIR, TG-DTA, XRD and TEM were employed to characterize the structure of the precursor and nano-sized PbTiO₃. The results showed that the optimized conditions for the preparation of nano-sized PbTiO₃ were the electrolysis of the Lead plate and Titanium plate at 50 ℃ and 40 ℃ respectively under 0.03mol·dm^-3Bu₄NBr solution. The nano-sized PbTiO₃prepared by electrolysis exhibited a dispersive structure with an average diameter of 10 to 15 nm.     

混合溶剂前体法制备纳米CuO粉体及其性能表征

Nano-CuO was prepared by heating nano-Cu₂(OH)₂CO₃ precursors in different calcination temperatures. The precursor was synthesized from water-alcohol mixed solution of Cu(Ac)₂ using mixed solution of NaOH and Na₂CO₃as precipitants. XRD, FT-IR, TEM, TG-DTA and surface area measurement techniques were used to investigate the properties of the CuO powder. The results show that the spherical, well dispersed nano-CuO powder with the average size of 15 nm and higher catalytic activity for H₂O₂ decomposition was obtained at 300 ℃. With the increasing of calcination temperature, crystal of CuO grows up, agglomeration of the powder becomes heavier and catalytic activity decreases. FT-IR patterns revealed that the vibration fine structure of Cu-O bond in nano-CuO powder disappears and main absorption is red-shifted with the average size of nano-CuO reducing.     

纳米PbSnO3的制备及其燃烧催化性能的研究

Nanocomposite PbSnO₃was synthesized by coprecipitation method , and its phase evolution process was investigated. The particle size, crystal form, and phase of samples were determined with XRD, TEM and EDS. The catalytic actiyity of sample on the thermal decomposition of RDX was investigated by DSC. The results show that nanocomposite PbSnO₃with the diameter of 9 nm can be obtained by calcining at 600 ℃ for 2 h, which crystal is cubic (pyrochlore type). The catalytic actiyity of nanocomposite PbSnO₃on the thermal decomposition of RDX is much higher than that of normal PbSnO₃. The nanocomposite PbSnO₃can decrease the peak temperature of thermal decomposition of RDX from 240.1 ℃ to 236.5 ℃, and the decomposition enthalpy ΔH of RDX increases 722 J·g^-1 （about 70%）.     

[Zn(en)3]SO4配合物大尺寸单晶的水热法生长和表征

Large size single crystals of [Zn(en)₃]SO₄ have been successfully grown by a hydrothermal process at 160℃ for 24h， using CuSO₄·5H₂O， ethylene diamine and reductive Zn powder as reactants. The diameters of the single crystals are range from 0.5mm to 1mm， and lengths reach up to 20mm. The single crystals were characterized by XRD analysis， FTIR and UV-Vis spectrum absorption measurements. The single crystal was confirmed to be [Zn(en)₃]SO₄ by performing powder diffraction of the single crystal. X-ray diffraction of the single crystals shows (100)-face to be cleavage face. The diffraction peaks are sharp and rocking curve for 200 diffraction has a narrow FWHM (the full width at half maximum)， which indicate the single crystal of [Zn(en)₃]SO₄ is perfect with less lattice distortion and defects. The single crystal appears transparent，and has constant weak absorption in UV-Vis spectrum region，which could be used as a novel optical crystal material.     

Li4Ti5O12溶胶-凝胶法合成及其机理研究

The precursors of Li₄Ti₅O₁₂ were prepared from tetrabutyl titanate and lithium acetate by sol-gel process. The Li₄Ti₅O₁₂ samples were synthesized by calcining the gel precursors at 400～900 ℃ in air for 6～20 h. Its reaction mechanism was investigated by infrared spectroscopy(IR), thermogravimetry(TG) and X-ray diffraction(XRD). The effects of sinter-temperature, calcination-time and thermal-treatment for the products were discussed. The samples were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM). The results showed that the single-phase products were obtained by calcining the gel precursors at 800 ℃ in air for 20 h, the sinter-temperature was lower than that of solid-state method, the particles were narrowly distributed, well crystallized with a size range from 0.3μm to 0.5 μm.     

磁性Fe3O4 /壳聚糖的化学修饰及包覆机理研究

Nano-sized Fe₃O₄ powder was prepared through an Oxygenation-Hydrothermal method. The chitosan magnetic complex was prepared by coating chitosan on the surface of Fe₃O₄ powders through Microlatex-Crosslinking Method. The product was characterized by IR， XRD， TEM， Vibrating Sample Magnetometer (VSM)， TG methods. Results show that the as-prepared powder is 25 nm in size and shows supermagnetism. The content of magnetite in microspheres is 37.8%. The mechanism for the coating reaction of chitosan to Fe₃O₄ nanoparticles is also suggested.     

锂离子电池正极材料LiMn2O4的合成与晶体结构（英）

Spinel LiMn₂O₄ powders were prepared using two-step synthesis method consisting of solid-state reaction method and citrate modified sol-gel method. The effects of the calcination temperature and the Li/Mn ratio of raw materials were studied on the physicochemical and electrochemical properties of the spinel LiMn₂O₄ powders, such as crystallinity, lattice constant and density. The title compound was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Polycrystalline LiMn₂O₄ powers calcined at 750 ℃ were found to be composed of very uniformly-sized microcrystal with an average particle size of 300 nm. The improvement in electrochemical properties was mainly attributed to the process of re-grinding by absolute alcohol.     

Synthesis and Magnetic Properties of Pt3Co/Fe3O4 Nanocomposites

Bimagnetic Pt₃Co/Fe₃O₄ nanocomposite is synthesized in aqueous solution. The nanoparticles are characterized with TEM, FTIR, and magnetic measurements. The as‐synthesized nanocomposite exhibits ferromagnetic properties at room temperature due to the exchange coupling between Pt₃Co and Fe₃O₄. Magnetic properties of Pt₃Co/Fe₃O₄ nanoparticle can be tuned by varying of the molar ratio of iron to platinum. Pt₃Co/Fe₃O₄ nanoparticles exhibit higher saturation magnetization when the molar ratio of iron to platinum is 1.     

导电高分子PEDOT/PSS稳定的Pt3Co纳米粒子的制备及电、磁性

利用一步共还原法在导电高分子聚二氧乙基噻吩/聚对苯乙烯磺酸(PEDOT/PSS)水溶液中合成了磁性纳米复合物Pt₃Co-PEDOT/PSS. 利用透射电镜(TEM)、X射线衍射(XRD)、拉曼光谱、超导量子干涉仪(SQUID)对其进行了表征.结果表明Pt₃Co纳米粒子为面心立方结构(fcc), 粒子平均粒径为9.6 nm, 标准偏差为2.4 nm. 用旋转涂膜法制备的Pt₃Co-PEDOT/PSS薄膜导电率()在1.6～4.0 S/cm之间. 当温度在阻塞温度(T_B, 110.5 K)以上时, 纳米复合物Pt₃Co-PEDOT/PSS显示出超顺磁性, 低于T_B时呈铁磁性, 在5 K时其剩磁(M_r)和矫玩力(H_c)分别为4.1 emu/g和701 Oe(奥斯特).     

Thermal decomposition of cobalt nitrato compounds: Preparation of anhydrous cobalt(II)nitrate and its characterisation by Infrared and Raman spectra

The thermal decomposition of Co(NO₃)₂·6H₂O (1) as well as that one of NO[Co(NO₃)₃] (Co(NO₃)₂·N₂O₄) (2) was followed by thermogravimetric (TG) measurements, X-ray recording and Raman and IR spectra. The stepwise decomposition reactions of 1 and 2 leading to anhydrous cobalt(II)nitrate (3) were established. In N₂ atmosphere, cobalt oxides are finally formed whereas in H₂/N₂ (10% H₂) cobalt metal is produced. Rapid heating of cobalt(II)nitrate hexahydrate causes melting (formation of a hydrate melt) and therefore side reactions in the hydrate melt by incoupled reactions and evolution/evaporation of different species as, e.g., HNO₃, NO₂, etc. In case of larger amounts in dense packing in the sample container, the formation of oxo(hydoxo)nitrates is possible at higher temperature. For 2, its thermal decomposition to 3 was followed and its decomposition mechanism is proposed.     

IR and Raman spectra of two layered aluminium phosphates Co(en)3Al3P4O16 · 3H2O and [NH4]3[Co(NH3)6]3[Al2(PO4)4]2 · 2H2O

The FT IR and FT Raman spectra of Co(en)₃Al₃P₄O₁₆ · 3H₂O (compound I) and [NH₄]₃[Co(NH₃)₆]₃[Al₂(PO₄)₄]₂ · 2H₂O (compound II) are recorded and analysed based on the vibrations of Co(en)₃³⁺, Co(NH₃)₆³⁺, NH₄⁺, Al---O---P, PO₃, PO₂ and H₂O. The observed splitting of bands indicate that the site symmetry and correlation field effects are appreciable in both the compounds. In compound I, the overtone of CH₂ deformation Fermi resonates with its symmetric stretching vibration. The NH₄ ion in compound II is not free to rotate in the crystalline lattice. Hydrogen bonding of different groups is also discussed.     

WS2纳米颗粒的合成及摩擦学性能研究

将自制的WO₃纳米颗粒前驱体与S粉混合,在自制的反应装置氢气氛中,于550～750 ℃下煅烧得到二硫化钨纳米颗粒,反应中用H₂代替H₂S以减少对周围环境的污染。该合成路线简单且产物纯度高。用XRD、SEM、TEM和HRTEM对二硫化钨纳米结构进行了表征和分析,并将WS₂纳米颗粒作为添加剂添加到N40基础油中,在MS-T3000摩擦磨损仪测试其摩擦学性能。结果显示:制备的二硫化钨颗粒平均粒径在50 nm以内,其形状为球形或类球形。WS₂纳米颗粒作为普通润滑油的纳米级固体添加剂表现出了较优异的摩擦学性能。     

Pt2Mo3N and PdPtMo3N: new interstitial nitrides prepared from freeze-dried precursors

The molybdenum bimetallic and trimetallic nitrides Pt₂Mo₃N and PdPtMo₃N have been synthesized by ammonolysis of the stoichiometric amorphous precursor, obtained by freeze drying of aqueous solutions of the appropriate metal salts. These compounds have been characterized by elemental analysis, energy-dispersive analysis of X-rays, X-ray diffraction, scanning electron microscopy, transmission electron microscopy and thermogravimetry analysis under an oxygen atmosphere. Pt₂Mo₃N and PdPtMo₃N crystallize in the cubic space group P4₁32 (213), with lattice parameters of a=6.83586(4) and 6.82542(3) Å, respectively, and form with the unusual filled β-manganese structure. These compounds are stable under air up to 580 K, the oxidation being complete at 910 K.     

Apparent molar volumes of alkaline earth hexacyanocobaltates (III) in aqueous solution at 25°C

The apparent molar volumes of Mg, Ca, Sr, and Ba hexacyanocobaltates (III) have been determined from 1×10⁴ to 0.2M (mol-dm^–3), using both vibrating tube densimeter and dilatometric methods. The semiempirical Pitzer equation has been used to reproduce the experimental data. Positive deviations from the Debye-Hueckel limiting law (DHLL) have been observed at C<0.01M and are compared with the predictions of two other electrostatic approaches, the DHLL+B₂ approximation of the Mayer theory and the numerical integration of the exponential Poisson-Boltzmann equation. A least squares procedure has been used to obtain the best fit parameters, including the apparent molar volume at infinite dilution.     

纳米Sb2O3的制备与性能研究

由于Sb2O3是一种性能优良的无机阻燃剂,并与卤素阻燃剂有很好的协效作用[1],1998年,全球用于阻燃的Sb2O3达80kt以上,占阻燃剂总耗量的7%[2]。但由于其本身的极性特点,加入到纤维、塑料等高分子材料中,材料的力学性能受到很大损失[3],因此对传统的微米级的Sb2O3进行超细、表面处     

氧气气氛下Pt3Ni(111)表面结构变化的从头算原子热力学研究

采用从头算原子热力学方法系统研究了Ni-rich和Pt-rich条件下Pt₃Ni(111)在不同偏析、表面化学吸附氧覆盖度下560个可能结构的相对稳定性,构建了氧气气氛下Pt₃Ni(111)表面结构演化、直至满覆盖化学吸附氧的热力学相图.结果表明,随着氧的化学势的升高,在热力学上仅出现两类稳定的结构,主要包括没有化学吸附氧的干净Pt-skin表面,以及在很低氧的化学势下就形成的含有化学吸附氧的Ni-skin表面,而有化学吸附氧的PtNi表面合金化的中间结构则处于亚稳态.仔细分析发现,这些结构的形成主要由金属的偏析能、氧与两种金属成键强弱的差别、氧的化学势的高低三个因素共同决定.     

柠檬酸根对纳米Fe3O4颗粒的生长及性能的影响

现代诊断学的发展使得超小超顺磁性的Fe₃O₄粒子在医学领域具有重要应用价值。实验中利用某些羧酸盐对铁氧化物晶粒成长的抑制作用，在共沉淀法中引入柠檬酸根，制备出平均粒径小于5 nm的Fe₃O₄纳米分散体系。研究了不同柠檬酸根浓度对生成粒子的大小、结晶和表面吸附情况的影响。对Fe₃O₄颗粒在不同条件下的磁性与胶体稳定性进行了讨论。