溶胶-凝胶法制备Sr_2MgSi_2O_7∶Eu~(2+),Dy~(3+)长余辉发光材料

采用溶胶-凝胶法合成了以SrMgSi2O7为基质,掺杂Eu2+,Dy3+的长余辉发光材料,并表征其结构,激发-发射光谱和余辉衰减曲线。XRD分析表明,所合成的样品为SrMgSi2O7晶体结构。发光粉体的激发波长范围较宽,表明从紫外至可见光均可激发该发光材料。发射光谱主峰位于466nm。样品在自然光照射后持续发出明亮的蓝光,余辉时间持续8h以上。     

TiO2/Eu-MCM纳米超分子材料的组装和光催化性能

利用有机相-水相界面共沉淀溶胶支持自组装方法制备粒径为15nm、孔径为8nm的分子筛Eu—MCM,它拥有734m^2／g的比表面积和1．49cm^3／g的比孔容．把TiO2组装到Eu—MCM的孔道中,组装成TiO2／Eu—MCM纳米复合材料．XRD,RAMAN和选区电子衍射花样分析表明纳米复合材料中的TiO2为锐钛型．TiO2／Eu—MCM的发光表现为Eu^3 离子的特征光谱,激发峰分别为342(^5L10),358(^5L9),378(^5L7),390(^5L6),411(^5D3),462(^5D2)和524(^5D1)nm;发射峰为579,592,613,653和701nm,归属于^5D0→^7FJ(J=0,1,2,3,4)组态间的跃迁．纳米复合材料的发光强度都要比Eu—MCM的发光强,其中43％TiO2／Eu—MCM的发光最强．荧光和紫外漫反射结果表明客体TiO2对主体分子筛存在能量传递效应．在微弱的紫外灯光照射下,TiO2／Eu—MCM纳米复合材料对苯酚的光催化氧化性能和其发光强度具有一定的相关性．29％TiO2／Eu—MCM的纳米复合材料拥有的比表面积、孔容和孔径分别为204m^2／g．0．24cm^3／g和4．7nm．29％TiO2／Eu—MCM对苯酚具有68％的最高光催化氧化产率和85％催化氧化选择性．     

溶胶-凝胶法制备Sr2MgSi2O7：Eu^2＋，Dy^3＋长余辉发光材料

采用溶胶-凝胶法合成了以Sr2MgSi2O7为基质，掺杂Eu^2 ，Dy^3 的长余辉发光材料，并表征其结构，激发-发射光谱和余辉衰减曲线。XRD分析表明，所合成的样品为Sr2MgSi2O7晶体结构。发光粉体的激发波长范围较宽，表明从紫外至可见光均可激发该发光材料。发射光谱主峰位于466nm。样品在自然光照射后持续发出明亮的蓝光，余辉时间持续8h以上。     

新型长余辉发光材料SrMgSi2O6:Eu2+,Ln3+的制备及性质

采用凝胶-燃烧法合成了系列稀土离子掺杂的Sr0.94MgSi2O6:Eu0.022+,Ln0.043+(Ln=La,Ce,Nd,Sm,Gd,Dy)蓝色长余辉发光材料,用X射线粉末衍射(XRD)、扫描电镜(SEM)、荧光分光光度计等对合成产物进行了分析和表征.结果表明:掺杂了不同稀土离子的SrMgSi2O6:Eu2+,La3+的晶体结构均为网方品系结构;其激发、发射光谱的峰形、峰位基本无变化,激发光谱为一宽带,最大激发峰位于400 nm处,次激发峰佗于415 nm处,发射光谱也为一宽带,最大发射峰位于470 nm附近,是典型的Eu2+的4F5d_4f跃迁导致的,不同之处在于其激发光谱、发射光谱强度及余辉性质有所差别,其中Dy3+是最理想的共掺杂稀土离子,Sr0.94MgSi2O6:Eu0.022+Dy0.043+的余辉时间最长,可达4 h;而Sm3+最差,Sr0.94MgSi2O6:Eu0.022+,Sm0.043+的余辉亮度最低,余辉时间最短.     

He(2^3S)与CH3I和CH3Br在流动余辉中传能的解离激发反应

本文利用流动余辉技术研究了亚稳态He(2^3S)与CH3I和CH3Br传能时分子的解离激发过程。实验中测定了产物的相对分布、CH(A, v'=0)的转动布居和主要碎片的形成速率常数。     

He(2^3S)与CH3I和CH3Br在流动余辉中传能的解离激发反应

本文利用流动余辉技术研究了亚稳态He(2^3S)与CH3I和CH3Br传能时分子的解离激发过程。实验中测定了产物的相对分布、CH(A, v'=0)的转动布居和主要碎片的形成速率常数。     

一类新的红色荧光粉MYzS4：Er^3＋（M=Srz＋，Ba^2＋）的合成与表征

Eu^2＋激活的CaS：Eu^[1],Eu^3＋和Sm^3＋激活的硫氧化物^[2]，Pr^3＋激活的Ca0.8Zn0.2Ti03^[3]以及Eu^2＋和Mn^2＋掺杂的SrY2S4^[4]都是重要的红色发光材料。然而，这些红色荧光粉的发射峰波长都短于650nm，对于农用日光转换材料^[5]，红色发射峰波长达到660nm才能与叶绿素的红区吸收相吻合。     

蓝紫色ZnO-Al2O3-SiO2长余辉陶瓷

通过高温固相法首次合成并报道了兰紫色ZnO-Al2O3-SiO2长余辉陶瓷，系统地研究了其发光和缺陷性质，在强度0.6mW.cm^-2，主峰254nm的UVP紫外灯下激发15min，然后关闭激发源，样品发射兰紫色长余辉，撤去激发源以后5s，余辉初始强度为230mcd.m^-1，色坐标为（0．1292，0．0984），暗视场中，8h以后余辉仍然肉眼可辨，样品的紫外可见发射和不同时间的余辉发射光谱显示，荧光发射位于390nm，来源于基质的自致发光，而余辉有两个发射峰，主峰位于390nm，肩峰位于520nm，这表明样品中存在两种余辉发射中心，由余辉衰减曲线可以看出，这两种余辉发光都由一个快过程和一个慢过程组成，其中，慢过程决定了材料的长余辉时间，从时间依赖的余辉强度倒数曲线可以看出，余辉强度与时间成反比，这表明余辉发光的机理为电子空穴复合过程，热释光谱显示，样品分别在92和250℃附近出现两个宽的热释峰，说明材料中至少存在两种具有不同陷阱深度的电子或空穴缺陷中心。     

La2O3：Sm发光粉的合成与发光性质的研究

以La2O3和Sm2O3为原料，用碳酸盐沉淀法制备了La2O3:Sm^3 发光粉，并分别用XRD，SEM和发光光谱及寿命进行了表征，La2O3晶相的形成温度为800℃，其发光强度随温度升高而增强，La2O3基质中Sm^3 的最佳掺杂浓度为1．5％（摩尔分数）。     

Yb3+共掺杂对Zn2GeO4:Mn2+绿色长余辉发光性能增强研究

利用高温固相法合成了Zn2GeO4:Mn2+以及Zn2GeO4:Mn2+,Yb3+绿色发射长余辉发光材料,对样品进行了X射线衍射分析、荧光光谱分析、色坐标、热释发光以及发光寿命测量.分析结果表明,在1050℃下烧结3h的Zn2CeO4为单相产物,所得Zn2GeO4:Mn2+发光材料具有良好的发光性能,在紫外灯激发下发出最强发射位于528 nm的宽带发射并具有优良的长余辉发光特性,其色坐标值分别为x=0.145,y=0.773.Yb3+共掺杂对其长余辉发光性能提高明显.余辉发光在暗场环境下肉眼可观察的持续时间超过2h.通过热释光谱对陷阱进行了分析.对Yb3+共掺杂的长余辉发光增强机理进行了讨论.     

Sc2MgGa2 and Y2MgGa2

Scandium magnesium gallide, Sc₂MgGa₂, and yttrium magnesium gallide, Y₂MgGa₂, were synthesized from the corresponding elements by heating under an argon atmosphere in an induction furnace. These intermetallic compounds crystallize in the tetragonal Mo₂FeB₂‐type structure. All three crystallographically unique atoms occupy special positions and the site symmetries of (Sc/Y, Ga) and Mg are m2m and 4/m, respectively. The coordinations around Sc/Y, Mg and Ga are pentagonal (Sc/Y), tetragonal (Mg) and triangular (Ga) prisms, with four (Mg) or three (Ga) additional capping atoms leading to the coordination numbers [10], [8+4] and [6+3], respectively. The crystal structure of Sc₂MgGa₂ was determined from single‐crystal diffraction intensities and the isostructural Y₂MgGa₂ was identified from powder diffraction data.     

Zur Kenntnis der Dialkalimetalldichalkogenide β-Na2S2, K2S2, α-Rb2S2, β-Rb2S2, K2Se2, Rb2Se2, α-K2Te2, β-K2Te2 und Rb2Te2

On Dialkali Metal Dichalcogenides β-Na₂S₂, K₂S₂, α-Rb₂S₂, β-Rb₂S₂, K₂Se₂, Rb₂Se₂, α-K₂Te₂, β-K₂Te₂ and Rb₂Te₂ The first presentation of pure samples of α- and β-Rb₂S₂, α- and β-K₂Te₂, and Rb₂Te₂ is described. Using single crystals of K₂S₂ and K₂Se₂, received by ammonothermal synthesis, the structure of the Na₂O₂ type and by using single crystals of β-Na₂S₂ and β-K₂Te₂ the Li₂O₂ type structure will be refined. By combined investigations with temperature-dependent Guinier-, neutron diffraction-, thermal analysis, and Raman-spectroscopy the nature of the monotropic phase transition from the Na₂O₂ type to the Li₂O₂ type will be explained by means of the examples α-/β-Na₂S₂ and α-/β-K₂Te₂. A further case of dimorphic condition as well as the monotropic phase transition of α- and β-Rb₂S₂ is presented. The existing areas of the structure fields of the dialkali metal dichalcogenides are limited by the model of the polar covalence.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.     

The alkali hypophosphites KH2PO2, RbH2PO2 and CsH2PO2

The structures of the hypophosphites KH₂PO₂ (potassium hypophosphite), RbH₂PO₂ (rubidium hypophosphite) and CsH₂PO₂ (caesium hypophosphite) have been determined by single‐crystal X‐ray diffraction. The structures consist of layers of alkali cations and hypophosphite anions, with the latter bridging four cations within the same layer. The Rb and Cs hypophosphites are isomorphous.     

Syntheses,Spectroscopic Studies,and Crystal Structures of Me2Sn(O2PPh2)2, Ph2Pb(O2PMe2)2, and Ph2Pb(O2PPh2)2

Me₂Sn(O₂PPh₂)₂ ( 1 ), Ph₂Pb(O₂PMe₂)₂ ( 2 ), and Ph₂Pb(O₂PPh₂)₂ ( 3 ) have been synthesized by the reactions of Me₂SnCl₂ or Ph₃PbCl with the corresponding diorganophosphinic acid in methanol. X‐ray diffraction studies show that the diorganophosphinate groups behave as double bridges between the metal atoms leading to polymeric ring‐chain structures with M₂O₄P₂ (M = Pb, Sn) eight‐membered rings. The organic groups bonded to the metal atoms are in trans‐position in the resulting octahedral arrangement around the metal atoms. The IR and the mass spectra were reported and discussed.