三齿配位钛配合物催化烯烃聚合

钛基聚烯烃催化剂不仅满足了价廉和性质优良的聚烯烃生产,而且有望进一步提升聚烯烃品质和发展新型聚烯烃树脂,因而结构可控钛配合物催化剂设计合成与催化性能提升是聚烯烃研究的核心课题之一。在茂金属催化剂之外,多齿配体的钛配合物成为研究的热点,其中,三齿配体良好地稳定了钛配合物。与此同时,配位原子的多样化极大地丰富了配合物合成与催化活性调控,在控制聚合活性的同时改善了所得聚合物的微观结构和宏观性能。本综述集中讨论了近年来在烯烃聚合催化体系中三齿配位钛配合物新研究的进展,讨论了取代基对于配合物中电子效应和立体效应的影响,以及配合物结构变化对于烯烃聚合活性及所得聚合物性能的影响关系,相关结果有助于指导钛配合物设计合成和催化聚合规律的研究。     

杂环膦亚胺钛配合物的合成及催化乙烯聚合（英文）

首先合成单取代和双取代杂环膦化合物R-PPh_2[R=2-吡啶基(3a),2-噻吩基(3b),2-呋喃基(3c)]和Ph_2P-R'-PPh_2[R'=2,6-吡啶基(6a),2,5-噻吩基(6b),2,5-呋喃基(6c)].然后与叠氮三甲基硅烷发生Staudinger反应生成相应的杂环膦亚胺配体R-PPh_2(NSiMe_3)和(Me_3SiN)Ph_2P-R'-PPh2(NSiMe_3).最后与环戊二烯三氯化钛反应脱去三甲基氯硅烷后得到具有烯烃聚合催化活性的杂环膦亚胺钛配合物.所有配合物结构都经过核磁的确认,为了进一步确定配合物分子结构,利用单晶X射线衍射解析了所有钛配合物的晶体结构.在助催化剂甲基铝氧烷(MAO)活化作用下,双钛中心配合物6a~6c比单钛中心类似配合物3a~3c表现出更高的催化乙烯聚合活性,所得聚合物具有较宽分子量分布呈双峰分布,6b在较低聚合温度下就可以制备超高分子量聚乙烯.     

丙烯基水杨醛亚胺镍系聚烯烃催化剂

后过渡金属;烯烃聚合;烯丙基取代配合物;丙烯基水杨醛亚胺镍系聚烯烃催化剂     

边臂策略在聚烯烃催化剂设计中的应用

提出用"边臂"策略设计和改造烯烃聚合催化剂,以钛、镍等配合物为模型,系统研究了边臂基团对配合物的配位模式、配合物的稳定性,对乙烯均聚活性以及乙烯与α-烯烃、环烯烃以及极性单体共聚合的活性和对聚烯烃的结构与性能的影响.研究结果表明通过边臂基团可以调节催化中心的空间形状和电子特性,实现对催化物种性质的控制与调节,调控烯烃聚合活性和聚烯烃的结构与性能.     

[N,N]-二齿镍配合物催化烯烃聚合

烯烃聚合催化剂的设计是烯烃配位聚合领域的一个核心科学问题,通过设计合成精确结构的催化剂可以有效地调控催化聚合性能以及聚合产物的结构.后过渡金属催化剂由于其易调变性、对聚合产物支化结构的可控性及对极性单体的容忍性,在烯烃聚合领域引起了广泛的关注.本文介绍了近年来本课题组在[N,N]-二齿镍烯烃聚合催化剂设计方面的研究进展,包括四元环的中性脒基镍催化剂、五元环的-二亚胺镍催化剂、2-胺基吡啶和-胺基亚胺系列镍催化剂,以及六元环的-二亚胺和苯胺基亚胺镍催化剂在烯烃聚合的应用.通过优化后过渡金属镍催化剂结构,可成功实施烯烃活性聚合.     

过渡金属乙烯齐聚与聚合催化剂研究进展

综述了近年来过渡金属配合物催化乙烯齐聚与聚合的最新进展;介绍了乙烯齐聚或聚合的反应时间、反应温度、乙烯压力、助催化剂用量等反应条件及配体上不同取代基对前过渡金属(铬,锆,钛,钒)和后过渡金属(铁,钴,镍,铜)配合物的催化活性和齐聚或聚合产物的影响;分别以钛和镍配合物催化剂为例,介绍了前过渡金属和后过渡金属催化乙烯齐聚或聚合的机理。     

同核双金属烯烃聚合催化剂

与单核金属配合物催化剂相比,双核金属配合物催化剂所具的双金属活性中心对烯烃聚合催化活性和所得聚合物的性能(包括聚合物微结构、分子量大小和分子量分布)产生了重要影响。本文综述了双金属配合物作为均相催化剂催化乙烯聚合及共聚合的最新研究,归纳思路包括不同的金属类型,即基于前过渡金属(Zr, Ti, Hf) 和后过渡金属(Ni, Fe, Co) 的双核金属组合; 不同的配体化合物,即CGC配体、酚氧亚胺配体、氮杂环胺配体、α-二亚胺和亚胺吡啶配体等。这些研究表明,前过渡金属催化剂不仅解决了乙烯自聚还实现了乙烯与α-烯烃共聚;后过渡金属催化剂高效催化乙烯自聚合,其中铁和钴催化剂获得高度线性聚乙烯,镍催化剂则产生多支链聚乙烯。     

烯烃高效催化剂及聚合与共聚合的研究

为中山大学高分子研究所烯烃配位聚合研究室在高效Ziegler-Natta催化剂、茂金属催化剂烯烃聚合与共聚合方面部分研究工作的概述。重点叙述了催化剂的设计、过渡金属配合物配体结构及聚合条件对乙烯、丙烯、1-丁烯、丁二烯、苯乙烯等烯烃单体聚合及共聚合活性以及聚合产物结构和分子量的影响。     

杯[4]芳烃钛-Al(iBu)_3催化乙烯聚合

众所周知 ,茂金属催化剂用于烯烃聚合 ,不仅具有高的催化活性 ,而且能制得高规整度聚合物 ,在理论研究和工业应用中都有十分重要的意义 ,国际上已形成对茂金属催化剂的研究热潮 .人们在致力于研究茂金属催化剂的同时 ,并没有停止对非茂金属均相催化剂的研究 ,其中酚氧基钛、锆配合物的优良催化性能尤为引人注目 ,这类新型均相催化剂能高效地催化烯烃均聚[1 ] ,苯乙烯间规聚合[2 ] ,乙烯 苯乙烯共聚等[3] .杯芳烃是由若干个对叔丁基苯酚通过亚甲基经 2 ,6位连接而成的一类环状大分子 ,其结构与酚氧类配体相似 .李勇等曾发现杯芳烃钛化合物与…     

Ind2Zr(OC6H4Me-P)2和EtnAICL3-n催化乙烯齐聚的研究

茂金属催化剂 ( Kaminsky催化剂 )是 80年代发展起来的烯烃聚合高效催化剂 [1] ,有关其催化烯烃聚合的研究很多 [2～ 4 ] .近年来 ,Kaminsky型催化剂催化乙烯齐聚合成低碳α烯烃的研究已有报道 [5] .由乙烯齐聚得到的直链低碳α烯烃是生产线性低密度聚乙烯 ( LL DPE)和高密度聚乙烯 ( HDPE)的共聚单体 .以茚基锆化合物与烷基铝组成的 Ziegler- Natta催化体系催化乙烯齐聚尚未见报道 .本文考察了Ind2 Zr( OC6H4 Me- p) 2 和各种乙基铝组成的二元催化体系对乙烯齐聚的催化性能 .1　实验部分　　二茚基锆配合物 Ind2 Zr Cl2 和 Ind2 …     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.