后过渡金属催化乙烯齐聚与聚合进展

石化工业最重要的产品是聚烯烃,其中大部分与聚乙烯相关,α-烯烃不仅是重要的共聚单体,也是精细化工的基本原料,乙烯工业发展程度代表了一个国家石化技术的水平。后过渡金属催化剂作为新型催化体系,能够高效催化乙烯齐聚和聚合,并且乙烯聚合可制备新型聚乙烯树脂。通过对配体的修饰,提高后过渡金属配合物催化活性,增加催化体系的热稳定性,仍然是当前催化剂设计的重要课题;实现对所得聚乙烯微观结构的控制,提高聚烯烃宏观性质是产业化的重要基础。本文基于配合物催化剂配体骨架设计为基础,集中讨论了铁、钴和镍配合物用于乙烯聚合和齐聚的性质比较;特别是集中展示了我们近期研究工作,综述了后过渡金属催化剂的新进展。     

过渡金属乙烯齐聚与聚合催化剂研究进展

综述了近年来过渡金属配合物催化乙烯齐聚与聚合的最新进展;介绍了乙烯齐聚或聚合的反应时间、反应温度、乙烯压力、助催化剂用量等反应条件及配体上不同取代基对前过渡金属(铬,锆,钛,钒)和后过渡金属(铁,钴,镍,铜)配合物的催化活性和齐聚或聚合产物的影响;分别以钛和镍配合物催化剂为例,介绍了前过渡金属和后过渡金属催化乙烯齐聚或聚合的机理。     

乙烯反应中的铁配合物催化剂：从概念到产业化

聚烯烃的核心是催化剂,地球上丰度最高的过渡元素铁的配合物在催化乙烯反应中展示了优异性能,本文综述了用于乙烯低聚与聚合的铁配合物催化剂的最新进展.通过调控所用配体的电子效应和空间位阻可以实现乙烯催化性能与所得聚合物微观结构的控制;铁催化剂具有独特的优势,不仅实现α-烯烃制备,而且可以制备高度线性聚乙烯包括制备窄分布的聚乙烯蜡.铁催化剂未来将在高附加值聚乙烯有巨大应用潜力.     

α-萘基丁二亚胺氯化镍/MAO制备双(宽)峰聚乙烯

合成了一种新型α 二亚胺镍配合物———α 萘基丁二亚胺氯化镍 ,此配合物作为催化剂在MAO的活化下催化乙烯聚合得到支化聚乙烯 ,聚合活性高达 7 18× 10 5gPE molNi·h ,1 3C NMR、FTIR测试结果表明制备的聚乙烯含有末端双键 ;GPC结果表明所制备的聚乙烯分子量呈双 (宽 )峰分布 ,其原因有两个 ,一是此催化剂能产生分子量较低的α 烯烃 ,在聚合过程中一部分α 烯烃会“就地”与乙烯原位共聚形成分子量较高的聚合物 ,二是此催化剂存在立体异构体 ,而不同异构体在MAO活化下形成的活性中心的配位环境不同 ,因而得到的聚乙烯的分子量也不同 .研究了聚合温度、聚合压力、铝镍摩尔比 (nAl nNi)对催化活性、聚乙烯分子量、支化度的影响 .聚乙烯的分子量随聚合温度的升高而下降 ,支化度增大 ,熔点则降低 .     

负载苊二亚胺镍/烷基铝催化单一乙烯制备高支化聚乙烯

1995年,Brookhart 等人以大体积α-二亚胺为配体制备了Ni（Ⅱ）和Pd（Ⅱ）的配合物,作为乙烯聚合催化剂,能有效的抑制反应过程中的β-H消除反应,从而实现了促进链增长的目的,得到了高分子量的聚合物.这类催化体系一般是以二亚胺镍的溴化物为主催化剂,MAO作助催化剂,均相催化乙烯聚合.     

Schiff碱二价钐配合物[2-OC_6H_4CH═N(2,6-~iPr_2C_6H_3)]_2Sm(THF)_2催化己内酯开环聚合

(取代 )水杨醛缩合的 Schiff碱作为一种辅助配体广泛用于过渡金属有机化学中 ,如 Salen Al可以催化丙交酯、己内酯等环酯的开环聚合 [1]。近来 ,Grubbs等 [2 ]发现 ,(取代 )水杨醛和芳胺缩合的 Schiff碱后过渡金属 Ni配合物 ,在不加助催化剂的条件下 ,作为单组分催化剂 ,对乙烯等α-烯烃的聚合具有很高的催化活性[2 ] 。虽然类似的 Schiff碱稀土配合物也有一些报道 ,但有关其催化聚合反应性能的研究还很少见 [3]。我们选用 Sm I2 为起始原料 ,合成了 Schiff碱二价 Sm配合物 ,并发现这种配合物对己内酯开环聚合有高催化活性 ,生成聚合物…     

水杨醛亚胺镍配合物催化的乙烯水相聚合

在含表面活性剂的水相体系中, 用一系列水杨醛亚胺镍配合物催化乙烯聚合, 得到了高分子量低支化度聚乙烯. 研究表明水杨醛亚胺镍配合物中苯环上取代基的电子效应和空间位阻对乙烯聚合活性和聚合物的分子量有所影响. 提高配合物酚氧环上取代基的吸电子性, 聚合活性相应增加, 但聚乙烯的分子量降低; 而增加苯胺环上取代基的空间位阻, 聚合活性和聚乙烯的分子量均增加. 粘度法测得由水相聚合得到的聚乙烯的分子量在10⁴～10⁵范围内. DSC测得该聚乙烯的结晶度在50%～70%之间, 熔点在115～137 ℃范围内. GPC分析表明用环辛二烯合镍[Ni(COD)₂]助催化乙烯, 聚乙烯的分子量分布随酚氧环上取代基电负性增加而从双峰到单峰变化, 动态流变学研究进一步说明了聚乙烯分子量及其分布的变化.     

膦基苯磺酸(PO)金属配合物催化乙烯与极性单体的共聚反应及其机理研究进展

含有膦基苯磺酸(PO)配体的烷基金属配合物表现出罕见的烯烃聚合催化性质,其不但可以催化乙烯均聚形成线性聚乙烯,而且可以催化乙烯与众多的极性单体如CH2=CHX、CO等共聚产生功能化线性聚烯烃.总结了PO配体的结构特点和(PO)Pd(Ⅱ)配合物引发的新型聚合反应,综述了(PO)Ni(Ⅱ)催化剂在催化乙烯和极性单体共聚方面的应用,以及含有膦基二磺酸配体OPO的Pd(Ⅱ)、Ru(Ⅳ)催化剂的特殊催化性质.另外,从配体的对称性、柔性和轴向官能团位阻以及纯电子效应等方面对PO金属催化剂的构效关系和共聚催化反应机理进行了探讨.     

双组分茂金属催化剂催化乙烯聚合的研究

选择能形成支链的不对称桥联茂金属化合物Me2 C[(Cp) (Ind) ]ZrCl2 和非桥联的不同结构的茂金属化合物二氯二 (烯基取代环戊二烯 )锆如 ( Cp) 2 ZrCl2 ,(Cp) 2 ZrCl2 和 (Cp) 2 ZrCl2 ,以MAO为助催化剂 ,分别组成三组双组分茂金属催化剂的催化体系 ,催化乙烯聚合 .结果表明 ,两类催化剂组成的双组分茂金属催化体系催化乙烯聚合能得到支化的宽分子量分布的聚乙烯 ;聚合温度和改变两种茂金属催化剂的摩尔比对催化活性和分子量有很大影响 .因此可以利用改变双组分茂金属催化剂的摩尔比例和聚合温度来调控聚合物的分子量和分子量分布 .改变两种茂金属催化剂的摩尔比和聚合温度也能使聚合物的结晶度发生改变     

镍配位催化乙烯聚合新进展

在烯烃聚合领域中,催化剂决定了所得聚合物的分子量与分布以及微观结构,进而影响聚烯烃材料的物理与机械性能。镍配合物催化乙烯聚合反应中,既会获得齐聚物也可能获得聚合物,有意思的是所得聚乙烯材料较容易呈现弹性体材料的性质。因此,加强镍配合物催化剂的研究有助于筛选更高活性和优良性能的催化剂体系,制备新型聚乙烯弹性体材料,甚至为该类乙烯聚合中试研究做铺垫。本文综述了近年来镍配合物催化乙烯聚合研究的新进展,重点讨论了配合物结构对于催化活性、热稳定性以及聚合产物微结构的影响与规律。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.