Diazonium salt-derived 4-(dimethylamino)phenyl groups as hydrogen donors in surface-confined radical photopolymerization for bioactive poly(2-hydroxyethyl methacrylate) grafts

In this paper we describe a novel methodology for grafting polymers via radical photopolymerization initiated on gold surfaces by aryl layers from diazonium salt precursors. The parent 4-(dimethylamino)benzenediazonium salt was electroreduced on a gold surface to provide 4-(dimethylamino)phenyl (DMA) hydrogen donor layers; free benzophenone in solution was used as a photosensitizer to strip hydrogen from the grafted DMA. This system permitted efficient surface initiation of photopolymerization of 2-hydroxyethyl methacrylate. The resulting poly(2-hydroxyethyl methacrylate) (PHEMA) grafts were found to be very adherent to the surface as they resist total failure after being soaked in the well-known paint stripper methyl ethyl ketone. The PHEMA grafts were reacted with 1,1'-carbonyldiimidazole to yield carbamate groups that are able to react readily with amino groups from proteins. The final surface consisted of protein-functionalized PHEMA grafts where bovine serum albumin (BSA) protein is specifically linked to the grafts by covalent bonds. We used X-ray photoelectron spectroscopy to monitor the chemical changes at the gold surface all along the process from the neat gold to the end-protein-functionalized polymer grafts: the PHEMA graft thickness ranged from 7 to 27 nm, and the activation by 1,1'-carbonyldiimidazole reached 37% of the OH groups, which was sufficient for 90% surface coverage of the grafts by BSA. This work conclusively provides a new approach for bridging reactive and functional polymers to surfaces via aryl diazonium salts in a simple, fast, and efficient approach of importance in biomedical and other applications.     

聚(甲基丙烯酸-2-羟乙酯)改性金表面用于构建生物检测基材

采用电子活化再生原子转移自由基聚合(AGET ATRP)的方法将聚(甲基丙烯酸-2-羟乙酯)(PHEMA)接枝在金表面,对经修饰的金表面的生物惰性做了系统的研究,并利用PHEMA的羟基末端固定生物素(biotin)分子,以biotin对抗生物素蛋白(avidin)的识别为模型,研究了不同厚度的PHEMA对结合avidin的影响,以及该表面作为生物检测基材的可行性.生物惰性研究表明,PHEMA修饰的金表面不但能够有效的排斥纤维蛋白原(Fg)、人血清白蛋白(HSA)和溶菌酶(Lys)的非特异性吸附,还能够抑制3种细胞(L02、L929和EC)的黏附,是一种良好的抗污表面.通过控制聚合时间制备了不同厚度的PHEMA-biotin修饰的表面,同位素125I标记HSA吸附结果表明这几种表面均能够有效排斥非特异性蛋白质吸附,特异性FITC-avidin吸附结果表明,厚度较小时(16 nm)由于荧光淬灭而难以检测到荧光信号,厚度在16 nm和49 nm之间,荧光信号随厚度增加而增强,通过比较信噪比,认为厚度在49 nm以上时比较理想.该表面在应用于QCM与荧光检测中均表现出良好的检测性能.     

QCM-D analysis of the performance of blocking agents on gold and polystyrene surfaces

With today's developments of biosensors and medical implants comes the need for efficient reduction of nonspecific binding. We report on a comparison of the ability of traditionally used blocking agents and poly(ethylene glycol) (PEG) derivatives to prevent protein adsorption on both gold and polystyrene surfaces. The adsorption kinetics of blocking molecules and proteins was monitored gravimetrically using quartz crystal microbalance with dissipation (QCM-D). The resistance to nonspecific adsorption was evaluated on gold and polystyrene surfaces coated with bovine serum albumin (BSA) or casein, gold coated with three different 6-11 ethylene glycol (EG) long hydroxyl- or methoxy-terminated PEG-thiolates and polystyrene blocked with a PLL-g-PEG or three different 12 EG long benzyl-PEG-derivatives. The prevention of protein adsorption on the coated surfaces was evaluated by monitoring the mass uptake at the addition of both pure prostate specific antigen (PSA) and seminal plasma. We demonstrate that on pure gold the PEG-thiols are superior to the other blocking molecules tested, with the end group and length of the PEG-thiols used being of minor importance. On polystyrene surfaces blocking with PLL-g-PEG, BSA and casein gave the best results. These results have an impact on further development of an optimized immunoassay protocol.     

Evaluating protein attraction and adhesion to biomaterials with the atomic force microscope

Failure of implanted biomaterials is commonly due to nonspecific protein adsorption, which in turn causes adverse reactions such as the formation of fibrous capsules, blood clots, or bacterial biofilm infections. Current research efforts have focused on modifying the biomaterial interface to control protein reactions. Designing biomaterial interfaces at the molecular level, however, requires an experimental technique that provides detailed, dynamic information on the forces involved in protein adhesion. The goal of this study was to develop an atomic force microscope (AFM)-based technique to evaluate protein adhesion on biomaterial surfaces. In this study, the AFM was used to evaluate (i) protein-protein, (ii) protein-substrate, and (iii) protein-dextran interactions. The AFM was first used to measure the pull-off forces between bovine serum albumin (BSA) tips/BSA surfaces and BSA tips/anti-BSA surfaces. Results from these protein-protein studies were consistent with the literature. More importantly, the successful measurement of antibody-antigen binding interactions demonstrates that both the BSA and anti-BSA proteins retain their folded conformation and remain functional following our immobilization protocol. The AFM was also used to quantify the physiochemical interactions of proteins during adhesion to various self-assembled monolayers (SAMs) and dextran-coated substrates representative of potential biomaterial interface modifications. Dextran, which renders surfaces very hydrophilic, was the only surface coating that BSA protein did not adhere to. Hydrophobic interactions were not found to play a significant role in BSA adhesion. Therefore, the dextran molecules may resist protein adhesion by repulsive steric effects or hydration pressure. Moreover, the AFM-based methodology provides dynamic, quantitative information about protein adhesion at the nanoscale level.     

Superhydrophilic and superwetting surfaces: definition and mechanisms of control

The term superhydrophobicity was introduced in 1996 to describe water-repellent fractal surfaces, made of a hydrophobic material, on which water drops remain as almost perfect spheres and roll off such surfaces leaving no residue. Today, superhydrophobic surfaces are defined as textured materials (and coatings) on (nonsmooth) surfaces on which water forms contact angles 150° and larger, with only a few degrees of contact angle hysteresis (or sliding angle). The terms superhydrophilicity and superwetting were introduced a few years after the term superhydrophobicity to describe the complete spreading of water or liquid on substrates. The definition of superhydrophilic and superwetting substrates has not been clarified yet, and unrestricted use of these terms sometimes stirs controversy. This Letter briefly reviews the superwetting phenomenon and offers a suggestion on defining superhydrophilic and superwetting substrates and surfaces.     

特殊浸润性表面的液滴凝结

以铝片为基底, 经电化学腐蚀和沸水处理制备了多级微纳米结构; 通过气相沉积和涂油分别制备了超疏水表面、 疏水超润滑(slippery)表面和亲水slippery表面; 探究了表面不同的特殊浸润性(超亲水、 超疏水、 疏水slippery和亲水slippery)对液滴凝结的影响. 结果表明, 超亲水表面的液滴凝结属于膜状冷凝, 超疏水表面和slippery表面的液滴凝结均属于滴状冷凝. 超疏水表面液滴合并时, 合并的液滴会不定向弹离表面. 疏水slippery表面和亲水slippery表面由于表面浸润性的不同导致液滴成核密度和液滴合并的差异, 亲水slippery表面凝结液滴的最大体积远大于疏水slippery表面凝结液滴的最大体积. 4种表面的雾气收集效率由大到小依次为亲水slippery表面>疏水slippery表面>超亲水表面>超疏水表面.     

Non‐Fouling Character of Poly[2‐(methacryloyloxy)ethyl Phosphorylcholine]‐Modified Gold Surfaces Fabricated by the ‘Grafting to’ Method: Comparison of its Protein Resistance with Poly(ethylene glycol)‐Modified Gold Surfaces

Poly[2‐(methacryloyloxy)ethyl phosphorylcholine] ‐modified gold surfaces, which have been newly prepared by a ‘grafting to’ method using a series of monosulfanyl‐terminated PMPC, are characterized by protein adsorption experiments based on surface plasmon resonance spectroscopy and ellipsometry measurements. The extent of BSA adsorption on PMPC‐modified surfaces was systematically reduced for thicker PMPC layers, thus the number of MPC units on the gold surface appears to be an important factor for the excellent protein resistance offered by PMPC‐modified gold surfaces fabricated by the ‘grafting to’ method, which is sharp contrast to that of PEG tethered chains.

     

Competitive adsorption of collagen and bovine serum albumin—effect of the surface wettability

The competitive adsorption of collagen and bovine serum albumin (BSA) on surfaces with varied wettability was investigated with imaging ellipsometry, and ellipsometry. Silane modified silicon surfaces were used as substrates. The results showed that surface wettability had an important effect on protein competitive adsorption. With the decrease of surface wettability, the adsorption of collagen from the mixture solution of collagen and BSA decreased, while the adsorption of BSA increased.     

Quantification of surface-bound proteins by fluorometric assay: Comparison with quartz crystal microbalance and amido black assay

Protein adsorption is of major and widespread interest, being useful in the fundamental understanding of biological processes at interfaces through to the development of new materials. A number of techniques are commonly used to study protein adhesion, but few are directly quantitative. Here we describe the use of Nano Orange, a fluorometric assay, to quantitatively assess the adsorption of bovine fibrinogen and albumin onto model hydrophilic (OH terminated) and hydrophobic (CH3 terminated) surfaces. Results obtained using this method allowed the calibration of previously unquantifiable data obtained on the same surfaces using quartz crystal microbalance measurements and an amido black protein assay. Both proteins were found to adsorb with higher affinity but with lower saturation levels onto hydrophobic surfaces. All three analytical techniques showed similar trends in binding strength and relative amounts adsorbed over a range of protein concentrations, although the fluorometric analysis was the only method to give absolute quantities of surface-bound protein. The versatility of the fluorometric assay was also probed by analyzing protein adsorption onto porous superhydrophobic and superhydrophilic surfaces. Results obtained using the assay in conjunction with these surfaces were surface chemistry dependent. Imbibition of water into the superhydrophilic coatings provided greater surface area for protein adsorption, although the protein surface density was less than that found on a comparable flat hydrophilic surface. Superhydrophobic surfaces prevented protein solution penetration. This paper demonstrates the potential of a fluorometric assay to be used as an external calibration for other techniques following protein adsorption processes or as a supplemental method to study protein adsorption. Differences in protein adsorption onto hydrophilic vs superhydrophilic and hydrophobic vs superhydrophobic surfaces are highlighted.     

Comparative SPR study on the effect of nanomaterials on the biological activity of adsorbed proteins

Bioactivity of proteins is evaluated to test the adverse effects of nanoparticles interjected into biological systems. Surface plasmon resonance (SPR) spectroscopy detects binding affinity that is normally related to biological activity. Utilizing SPR spectroscopy, a concise testing matrix is established by investigating the adsorption level of bovine serum albumin (BSA) and anti-BSA on the surface covered with 11-mercaptoundecanoic acid (MUA); magnetic nanoparticles (MNPs) and single-walled carbon nanotubes (SWCNTs), respectively. The immunoactivity of BSA on MNPs and SWCNT decreased by 18?% and 5?%, respectively, compared to that on the gold film modified with MUA. This indicates that MNPs cause a considerable loss of biological activity of adsorbed protein. This effect can be utilized for practical applications on detailed biophysical research and nanotoxicity studies.

不同表面性质聚电解质多层膜的制备及蛋白质吸附和血液相容性能

利用层层自组装方法制备了聚烯丙基铵盐酸盐(PAH)/聚苯乙烯磺酸钠(PSS)多层膜. 通过吸附或共价偶联, 在多层膜表面修饰了聚乙二醇(PEG)、牛血清白蛋白(BSA)或肝素, 通过石英晶体微天平(QCM)、椭圆偏振光谱和原子力显微镜(AFM)研究了多层膜的表面形貌及修饰方法对各种蛋白的吸附性能. 经修饰后的多层膜较基底膜的厚度均有所增大; 最外层经修饰后的多层膜吸附的BSA、纤维蛋白原及血浆蛋白的量较未修饰多层膜均有所减少. 采用SEM观察了血小板在多层膜上的黏附情况和形态变化, 计算了血小板的黏附率. 比较各多层膜的凝血酶原时间(PT), 发现修饰后的多层膜的凝血酶原时间均有所延长, 但各组间无显著性差异.     

A SPR and AFM study of the effect of surface heterogeneity on adsorption of proteins

The effect of chemical heterogeneity of surfaces on the adsorption of proteins was investigated using model surfaces prepared by self-assembly of omega-functionalized alkanethiols on gold substrates. Surface plasmon resonance was used to monitor the adsorption kinetics of bovine serum albumin (BSA) and the morphology of the adsorbed BSA was imaged with tapping mode atomic force microscopy. The experiments show that the morphology of the adsorbed protein layer was altered significantly only when the surface heterogeneity was distributed in a patchwise manner on a nanometer length scale, which is commensurate with the dimension of the protein. In contrast to linear flexible polymers where the initial adsorption rate remained unchanged upon introduction of the chemical heterogeneity, the initial rate for the globular protein changed from the value observed on homogeneous surfaces and was dependent on the heterogeneous distribution of the chemical sites.     

Use of cellulose derivatives on gold surfaces for reduced nonspecific adsorption of immunoglobulin G

This study addresses the design of protein-repellent gold surfaces using hydroxyethyl- and ethyl(hydroxyethyl) cellulose (HEC and EHEC) and hydrophobically modified analogues of these polymers (HM-HEC and HM-EHEC). Adsorption behavior of the protein immunoglobulin G (IgG) onto pure gold and gold surfaces coated with cellulose polymers was investigated and described by quartz crystal microbalance with dissipation monitoring (QCM-D), atomic force microscopy (AFM) and contact angle measurements (CAM). Surfaces coated with the hydrophobically modified cellulose derivatives were found to significantly outperform a reference poly(ethylene glycol) (PEG) coating, which in turn prevented 90% of non-specific protein adsorption as compared to adsorption onto pure gold. HEC and EHEC prevented around 30% and 60% of the IgG adsorption observed on pure gold, while HM-HEC and HM-EHEC were both found to completely hinder biofouling when deposited on the gold substrates. Adsorption behavior of IgG has been discussed in terms of polymer surface coverage and roughness of the applied surfaces, together with hydrophobic interactions between protein and gold, and also polymer-protein interactions.     

Enhancing hydrophilicity and protein resistance of silicone hydrogels by plasma induced grafting with hydrophilic polymers

<正>The hydrophilicity of silicone hydrogels used as soft corneal contact lens plays an important role in wearing comfort.In order to enhance hydrophilicity and protein resistance,silicone hydrogel membranes were modified by atmospheric pressure glow discharge plasma(APGDP) induced surface graft polymerization of N-vinyl pyrrolidone(NVP) and poly(oligoethylene glycol methyl ether methacrylate)(PEGMA) in this paper.XPS analysis demonstrated the success of graft polymerization of NVP and PEGMA onto the surface of silicone hydrogel membranes.The hydrophilicity of silicone hydrogels was characterized by the measurement of water contact angle(WCA).The result showed that NVP grafted silicone hydrogel has the WCA of about 68°and PEGMA grafted silicone hydrogel has the lowest WCA of about 62°,while the pristine silicone hydrogel is hydrophobic with the WCA of about 103°.Protein resistance of silicone hydrogels was investigated by the method of bicinchoninic acid assay using bovine serum albumin(BSA) as a model.It's found that the grafted silicone hydrogel has a significant improvement of protein resistance,and PEGMA grafting is more efficient for the reduction of protein adsorption than NVP grafting.The silicone hydrogel membranes grafted with NVP and PEGMA are good candidates of soft corneal contact lenses.     

Application of MoS2 modified screen-printed electrodes for highly sensitive detection of bovine serum albumin

The present work reports the application of a new molybdenum disulphide (MoS₂)-based electrochemical platform for highly sensitive quantitation of an iron-binding protein, bovine serum albumin (BSA). The gold screen-printed electrodes were modified with MoS₂ nanoflakes, followed by bioconjugation with anti-BSA antibodies. Using the above bioelectrode, cyclic voltammetric analysis was carried out in the presence of a Fe³⁺/Fe²⁺ redox probe which exhibited a linear response of peak current with varying concentrations of BSA up to 10 ng/mL (with a detection limit of 0.006 ng/mL). This study is novel in that it shows a considerable enhancement of signal during electrochemical sensing of a protein.     

Protein resistant polyurethane surfaces by chemical grafting of PEO: amino-terminated PEO as grafting reagent

The objective of this work was to gain a better understanding of the mechanism of resistance to protein adsorption of surfaces grafted with poly(ethylene oxide) (PEO). A polyurethane-urea was used as a substrate to which PEO was grafted. Grafting was carried out by introducing isocyanate groups into the surface followed by reaction with amino-terminated PEO. Surfaces grafted with PEO of various chain lengths (PUU-NPEO) were prepared and characterized by water contact angle and X-ray photoelectron spectroscopy (XPS). XPS data indicated higher graft densities on the PUU-NPEO surfaces than on analogous surfaces prepared using hydroxy-PEO (PUU-OPEO) as reported previously [J.G. Archambault, J.L. Brash, Colloids Surf. B: Biointerf. 33 (2004) 111-120]. Protein adsorption experiments using radiolabeled myoglobin, concanavalin A, albumin, fibrinogen and ferritin as single proteins in buffer showed that adsorption was reduced on the PEO-grafted surfaces by up to 95% compared to the control. Adsorption decreased with increasing PEO chain length and reached a minimum at a PEO MW of 2000. Adsorption levels on surfaces with 5000 and 2000 MW grafts were similar. There was no clear effect of protein size on resistance to protein adsorption. Adsorption on the PUU-NPEO surfaces was significantly lower than on the corresponding PUU-OPEO surfaces, again suggesting higher graft densities on the former. Adsorption of fibrinogen from plasma was also greatly reduced on the grafted surfaces. From analysis (SDS-PAGE, immunoblotting) of the proteins eluted after plasma exposure, it was found that the grafted surfaces and the unmodified substrate adsorbed the same proteins in roughly the same proportions, suggesting that adsorption to the PEO surfaces occurs on patches of bare substrate. The PEO grafts did not apparently cause differential access to the substrate based on protein size.     

Effect of interfacial proteins on osteoblast-like cell adhesion to hydroxyapatite nanocrystals

A quartz crystal microbalance with dissipation (QCM-D) technique was employed to detecting the protein adsorption and subsequent osteoblast-like cell adhesion to hydroxyapatite (HAp) nanocrystals. The interfacial phenomena with the preadsorption of three proteins (albumin (BSA), fibronectin (Fn), and collagen (Col)), the subsequent adsorption of fetal bovine serum (FBS), and the adhesion of the cells were investigated. The QCM-D measured the frequency shift (Δf) and dissipation energy shift (ΔD), and the viscoelastic properties of the adlayers were evaluated using ΔD-Δf plot and Voigt-based viscoelastic model. The Col adsorption significantly showed higher Δf, ΔD, elasticity, and viscosity values as compared to the BSA and Fn adsorption, and the subsequent FBS adsorption depended on the preadsorbed proteins. The ΔD-Δf plot of the cell adhesion also showed a different behavior depending on the surfaces, and the Fn- and Col-modified surfaces showed the rapid mass and ΔD changes by forming the viscous interfacial layers with cell adhesion, indicating that the processes were affected by the cellular reaction through the extracellular matrix (ECM) proteins. The confocal laser scanning microscope images of adherent cells showed a different morphology and pseudopod on the surfaces. The cells adhered to the surfaces modified with the Fn and Col had significantly uniaxially expanded shapes and fibrous pseudopods, and those modified with the BSA had a round shape. Therefore, the different cell-protein interactions would cause the arrangement of the ECM and the cytoskeleton changes at the interfaces, and these phenomena were successfully detected by the QCM-D and Voigt-based model.     

振荡法制备的聚多巴胺涂层的抗污染性能研究

抗生物吸附表面具有广泛的应用前景。本文中经振荡法制备的聚多巴胺涂层表现出良好的抗生物吸附性能。研究发现,经振荡法生成的聚多巴胺涂层具有小于15°的接触角,表现出超亲水性。以牛血清蛋白为模型蛋白质和以大肠杆菌与金黄色葡萄球菌为模型细菌,研究发现,该聚多巴胺涂层表现出良好的抗牛血清蛋白吸附和抗大肠杆菌与金黄色葡萄球菌吸附的性能。总体而言,该方法简便易行,所制备的聚多巴胺涂层具有良好的抗生物污染性能。     

Solvent-controlled organization of self-assembled polymeric monolayers on gold: an easy approach for the construction of protein resistant surfaces

Protein resistant surfaces based on poly(ethylene glycol) (PEG) coatings are extensively applied in the fields of biosensors, tissue engineering, fundamental cell-surface interaction research, and drug delivery systems. The structural organization of the PEG film on the surface has a significant effect on the performance of the film to resist protein adsorption. In this paper, we report an approach using solvent to control the organization of the polymeric monolayer on gold. A water soluble copolymer with grafted PEG side chains and alkyl disulfide side chains was synthesized. A polymeric monolayer was fabricated on a gold surface from different solutions (water- and toluene-based) of the copolymer. The organization of the polymeric monolayers was characterized by means of ellipsometry, cyclic voltammetry, contact angle, X-ray photoelectron spectroscopy, and atomic force microscopy. It was proven that the structural organization of the polymeric monolayer on a gold surface could be controlled by the solvent. A polymeric monolayer with PEG enriched at the outer level is obtained when water is used as the solvent. Various types of proteins, including fibrinogen, albumin, and normal human serum, were used to test the protein resistance of the gold surfaces modified by the polymeric monolayers. The polymeric monolayer formed from a water solution of the copolymer showed excellent protein resistance. In addition, by using water as the solvent, patterning of the polymeric monolayer could easily be achieved through a combination of lift-off and self-assembly. We believe that the approach reported here provides an easy, fast, and efficient way to fabricate a robust protein resistant surface.     

Completely aqueous procedure for the growth of polymer brushes on polymeric substrates

The growth of polymer brushes on polymer substrates is often challenging because of substrate incompatibility with the organic solvents used for initiator attachment. This letter reports the use of layer-by-layer adsorption of macroinitiators and subsequent aqueous ATRP from these immobilized initiators to prepare polymer brushes on polymeric substrates. Polyethersulfone (PES) films and porous membranes were modified with polyelectrolyte multilayer films, and a previously developed polycationic initiator, poly(2-(trimethylammonium iodide)ethyl methacrylate-co-2-(2-bromoisobutyryloxy)ethyl acrylate), was then electrostatically adsorbed onto these polyelectrolyte films. The immobilized macroinitiator is very efficient in initiating the growth of polymer brushes on PES, as demonstrated by aqueous syntheses of poly(2-hydroxyethyl methacrylate) (PHEMA) and poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) films. PHEMA (250 nm thick) and PDMAEMA (40 nm thick) brushes were grown in 2 h from surfaces modified with polycationic initiators. Moreover, this procedure is effective for growing brushes in the pores of PES membranes.