静电纺丝——从无规纳米纤维膜到取向连续长纱

静电纺丝是通过对聚合物溶液或熔体施加外电场制造纳米纤维的有效方法.电纺过程中,在静电力作用下聚合物射流快速鞭动,形成的纳米纤维无规堆砌,得到无纺布状的无规纳米纤维膜.这种纳米纤维膜具有极大的比表面积,已用于超高效过滤,在刨伤修复、组织工程、水处理等领域有广泛的应用前景.为了进一步拓展纳米纤维在纤维工业、纺织品、微制造等领域的应用,电纺纳米纤维的取向和连续长纱的制备研究受到科学家的重视,文献报道了多种纳米纤维取向方法.本文分析了纳米纤维膜无规堆砌结构的形成机理,总结了纳米纤维取向研究和连续长纱制备研究进展,特别介绍了基于静电作用分析提出的共轭电纺方法,讨论了取向纳米纤维的应用以及纳米纤维未来的研究方向.     

含芘苯乙烯/二乙烯苯共聚物的光物理研究

本文首次用稳态光谱法研究了含芘苯乙烯/二乙烯苯共聚物的光物理行为。结果表明,当共聚物中芘基的摩尔百分数低于0.006％时,其荧光光谱仅呈现芘基的单体荧光,并伴随以0—0发射谱带强度降低和精细振动结构的部分消失;当芘基的含量高于0.3％时,共聚物的荧光相继出现在420,440和475nm处的发射谱带。这一结果可归因于芘基各种基态和激发态聚集体的形成,集中地反映了交联共聚物凝聚态的非均匀性。     

聚酰胺-胺树枝状高分子的柱色谱提纯研究

采用发散法合成了0.5～4.0代(G)聚酰胺-胺(PAMAM)树枝状高分子,通过薄层色谱分析产物组成,并进一步选用柱色谱法对半代产物进行了提纯与精制.用红外,核磁,高效液相色谱(HPLC)和热重分析等方法对提纯后产物进行了表征.结果表明,提纯得到的各PAMAM产物具有较完整的分子结构,小分子含量很少;且0.5GPAMAM产物HPLC测试纯度达到97.81%.     

抗菌聚合物纳米纤维的研究进展

静电纺丝技术是制备功能聚合物纳米纤维的一种简单而有效的方法。由电纺纳米纤维堆砌而成的无纺织物具有巨大的比表面积,赋予其广泛的应用前景。通过在电纺聚合物纳米纤维中添加各类抗菌剂或对其表面进行化学改性,制备具有优异抗菌性能的新型功能聚合物纳米材料,将进一步拓展电纺纳米纤维在生物医学、过滤、精密制造等领域的应用。本文基于抗菌纳米纤维的分类进行总结,介绍国内外抗菌聚合物纳米纤维的研究现状,并对抗菌纳米纤维的未来发展进行了探讨。     

Electrospinning of zein/chitosan composite fibrous membranes

<正>Zein/chitosan composite fibrous membranes were fabricated from aqueous ethanol solutions by electrospinning. Poly(vinyl pyrrolidone)(PVP) was introduced to facilitate the electrospinning process of zein/chitosan composites.The asspun zein/chitosan/PVP composite fibrous membranes were characterized by scanning electron microscopy(SEM) and tensile tests.SEM images indicated that increasing zein and PVP concentrations led to an increase in average diameters of the composite fibers.In order to improve stability in wet stage and mechanical properties,the composite fibrous membranes were crosslinked by hexamethylene diisocyanate(HDI).The crosslinked composite fibrous membranes showed slight morphological change after immersion in water for 24 h.Mechanical tests revealed that tensile strength and elongation at break of the composite fibrous membranes were increased after crosslinking,whereas Young's modulus was decreased.     

Improving hydrophilicity and protein antifouling of electrospun poly(vinylidenefluoride-hexafluoropropylene) nanofiber membranes

<正>Poly(vinylidenefluoride-hexafluoropropylene)(PVDF-HFP) nanofiber membranes with improved hydrophilicity and protein fouling resistance via surface graft copolymerization of hydrophilic monomers were prepared.The surface modification involves atmospheric pressure glow discharge plasma(APGDP) pretreatment followed by graft copolymerization of poly(ethylene glycol) methyl ether methacrylate(PEGMA).The success of the graft modification with PEGMA on the PVDF-HFP fibrous membrane is ascertained by X-ray photoelectron spectroscopy(XPS) and attenuated total reflectance Fourier transform infrared measurements(ATR-FTIR).The hydrophilic property of the nanofiber membranes is assessed by water contact angle measurements.The results show that the PEGMA grafted PVDF-HFP nanofiber membrane has a water contact angle of 0°compared with the pristine value of 132°.The protein adsorption was effectively reduced after PEGMA grafting on the PVDF-HFP nanofiber membrane surface.The PEGMA polymer grafting density on the PVDF-HFP membrane surface is measured by the gravimetric method,and the filtration performance is characterized by the measurement of water flux.The results indicate that the water flux of the grafted PVDF-HFP fibrous membrane increases significantly with the increase of the PEGMA grafting density.     

Patterned growth of ZnO nanofibers

A simple method is adopted to grow ZnO nanofibers laterally among the patterned seeds designed in advance on silicon substrate. The preparation of seed lattices is carried out by lithographing the metal zinc film evaporated on the substrate. A layer of aluminum is covered on the zinc layer to prevent the ZnO nanorods vertically growing on the top surface. After oxidation, the patterned ZnO/Al2O3 spots are formed at the sites for the horizontal growth of ZnO nanofibers by the vapor phase transportation （VPT） method using the zinc powders as source material.     

用芘标记荧光研究苯乙烯／二乙烯苯交联凝胶的微环境性质

本文研究了一系列芘甲酰基标记的苯乙烯—二乙烯苯共聚物的荧光光谱，发现其光谱特征对共聚物中芘甲酰基的含量，溶胀作用以及溶胀溶剂的性质有明显的依赖性．这一结果可以用芘甲酰基在共聚凝胶中形成激基缔合物和激基复合物予以解释．     

含芘苯乙烯／二乙烯苯共聚物的合成与表征

本文首次通过共聚方法和功能基化方法合成了芘标记苯乙烯／二乙烯苯共聚物，用稳态荧光光谱、裂解色谱、裂解色谱－质谱等方法对芘标记共聚物进行了详细地表征。结果表明，通过控制芘标记单体的投料或功能基化反应时间，可以将一定量的芘基标记到苯乙烯／二乙烯苯共聚物中，其荧光光谱显示了芘基的单体荧光发射和激基缔合物荧光发射；共聚物裂解色谱的甲基芘峰和苯乙烯三聚体峰反映了芘基和交联聚苯乙烯骨架的特征，据此可建立甲基芘