电沉积表面修饰对染料敏化太阳电池微观性能影响机理研究

为了改善染料敏化太阳电池内电子的传输复合过程, 研究者尝试不同方法制备或改性TiO₂薄膜. 对TiO₂薄膜进行后处理, 在其表面引入一层小颗粒层, 是一种有效的方法并被广泛研究. 通过对TiO₂薄膜不同时间的电沉积表面修饰, 细致研究了表面修饰后染料敏化太阳电池微观性能的变化机制. 采用阳极氧化法在TiCl₃水溶液中对TiO₂薄膜进行电沉积后处理, 将溶液pH值调至2.2, 装置的反应速率由恒电位仪控制. 不同沉积时间电池带边移动以及电子传输复合的动力学过程, 借助强度调制光电流谱(IMPS)/强度调制光电压谱(IMVS)和电化学阻抗谱(EIS)等探测技术表征. 研究表明, 电沉积在TiO₂薄膜表面引入了大量浅能级陷阱态, 以致电势较高时电容随沉积时间延长增加明显. 不同时间的电沉积表面修饰在TiO₂薄膜表面形成了新的小颗粒层并改善了TiO₂颗粒间接触, 在改善电子注入及收集过程的同时, 也有效抑制了内部电子复合. IMPS/IMVS结果表明, 电沉积对动力学过程改善的效果受光强影响明显, 弱光下作用更为突出. 此外, 电池开路电压主要受带边移动及内部复合变化影响, 随沉积时间延长, 表面电荷的增多使TiO₂薄膜带边逐渐正移, 有效改善了光电流却限制了开路电压的提升. 在适合的电沉积时间下, 电沉积表面修饰可以同时改善光电流和光电压.     

纳米级包覆层厚度对染料敏化太阳电池中电子注入效率和电子寿命的影响

选取氧化钐作为包覆材料, 采用浸渍法对已烧结好的纳米TiO₂多孔薄膜电极进行修饰, 并将其应用于染料敏化太阳电池中, 研究了纳米级氧化钐包覆层厚度及均匀性对染料敏化太阳电池中电子注入效率和电子复合过程的影响和作用机制. 结果表明, 包覆层厚度对电子注入效率和电子复合具有明显影响, 且电子注入效率和电子寿命随包覆层厚度的增加而呈现相反的变化趋势, 包覆层厚度在0.4 nm以内, 电池性能最好.     

Y2O3/TiO2 "核-壳"结构在染料敏化太阳电池中的应用

在纳米TiO₂多孔薄膜表面包覆超薄绝缘体,形成"核-壳"结构的势垒层,是目前染料敏化太阳电池（DSC）光阳极改性的研究热点之一.本文选取氧化钇（Y₂O₃）作为包覆层材料,采用浸渍法对纳米TiO₂多孔薄膜进行修饰,研究Y₂O₃包覆处理对TiO₂薄膜微观结构及能带结构的影响;将浸渍法制备得到的Y₂O₃/TiO₂"核-壳"结构光阳极应用于DSC中,研究了饣覆层对电子传输复合以及DSC光电转换性能的影响.结果表明,Y₂O₃包覆处理后,薄膜的平带电势负移,且电子复合得到有效抑制,电子寿命增大,电池的开路电压明显提高.研究表明,适量引入Y₂O₃可以达改善电池性能的目的.     

共吸附剂修饰TiO2电极及其在染料敏化太阳电池中的应用

在染料敏化太阳电池中, 引入共吸附剂通常有抑制染料聚集和提高电池性能的作用. 通过光谱电化学、线性伏安扫描和电化学阻抗谱(EIS)研究了几种以单羧酸基为吸附基团的共吸附剂对纳米TiO₂薄膜的修饰作用. 结果表明本实验中的共吸附剂均能使TiO₂平带电势负移, 并抑制TiO₂导带电子的复合, 其中胆酸类共吸附剂表现出较好的暗电流抑制性能. 适当浓度共吸附剂的引入能够提高N719染料敏化太阳电池的开路电压、填充因子和光电转换效率.     

不同受体结构染料共敏化对染料敏化太阳电池性能的影响

为了拓宽染料敏化太阳电池对太阳光谱的响应范围,提高电池的光电转换效率,将两种含有不同受体结构（绕丹宁-3-乙酸基（RA）和氰基丙烯酸基（CA））的三苯胺染料（TR1和TC1）进行共敏化。TR1染料平伏吸附在TiO₂表面,而TC1染料直立吸附在TiO₂表面。将两种染料按照不同摩尔比共敏化TiO₂后,TC1占据TR1的部分位置,拓展光谱的同时也抑制了电荷复合,电子寿命较TR1敏化的太阳电池长。在TR1与TC1摩尔比为5：5的共敏剂溶液敏化的共敏电池器件中,短路光电流密度（J_sc）为11.7 mA/cm²,开路电压（V_oc）为704 mV,填充因子（FF）为0.73,光电转换效率（η）为6.03%。该结果明显优于单一染料敏化的电池器件。     

含苯并噻二唑的吩噻嗪染料分子的设计合成及其在染料敏化太阳能电池中的应用

设计合成了三种含苯并噻二唑的吩噻嗪类有机染料光敏剂JY50~JY52,在对其光物理和电化学性质进行研究的基础上,使用三种染料对纳米TiO₂电极进行敏化制备太阳能电池器件,并系统研究了其光电转化效率及电荷传输阻抗等光伏特性.研究结果表明,在染料分子中引入共轭基团有助于其摩尔吸光系数的提升,从而提升光电流.两个长烷基链的引入能够有效地抑制染料分子激发态电子在TiO₂光阳极表面的电子复合,从而提升其电子注入效率.其中,在AM 1.5（100 mW·cm^-2）的模拟光强下,基于碘电解质的染料JY51电池器件获得了7.61%的光电转化效率.     

柔性TiO2纳米管薄膜电极的制备及其光电性能

采用水热合成法制备出TiO₂纳米管,通过XRD、TEM和氮气等温吸附-脱附仪等测试手段对TiO₂纳米管进行了表征.用烧结的TiO₂纳米管和P25粉末混合制成薄膜电极,并研究了薄膜电极的表面形貌、染料吸附量和光电性能.研究表明,加入TiO₂纳米管可以制备出机械稳定的薄膜;掺杂TiO₂纳米管的含量越多,薄膜电极的染料吸附量越大;掺杂5%烧结纳米管粉末的薄膜电极的光电性能最好,其短路电流可达3.25mA,光电转换效率达到1.67%.     

异质结界面修饰对TiO2/P3HT杂化太阳电池光电性能的增强作用

采用水热法在F-SnO₂(FTO)导电玻璃上制备了一维TiO₂纳米棒阵列, 将一种两亲有机三苯胺染料M分子吸附在其表面, 进而旋涂有机聚合物聚3-己基噻吩P3HT, 构建结构为FTO/TiO₂/M/P3HT/PEDOT:PSS/Au的杂化太阳电池. 瞬态光电流谱反映在杂化电极中存在pn异质结. 接触角测试表明TiO₂表面吸附有机M分子后, 亲水性表面转变为疏水性表面, 利于与聚合物P3HT的进一步接触; 稳态荧光发射光谱表明经修饰的杂化电极的荧光发射强度降低, 由荧光衰减曲线拟合得到的荧光寿命降低, 说明在TiO₂与P3HT之间存在有效的电荷转移, 电荷复合被抑制. 电化学阻抗分析表明界面修饰后电子复合电阻和电子寿命增大. 电池的特性参数均比界面修饰前有所提高, 光电转换效率为1.61%. 另外, 对该电池的工作机理、电荷传输过程进行了初步探讨.     

对电极性能对染料敏化太阳电池动力学过程的影响

借助电化学阻抗谱(EIS)和强度调制光电流谱(IMPS)/强度调制光电压谱(IMVS)技术, 采用不同纳米TiO₂多孔薄膜对电极研究了染料敏化太阳电池(DSC)内部2个主要电荷输运过程的内在联系, 并探讨了载Pt材料对DSC界面动力学过程及电池宏观性能的影响机理. 借助等效电路模型分析了基于不同对电极材料电池的填充因子变化原因. 结果表明, 对电极材料的电极电荷交换过程制约光阳极膜内电子传输, 进而影响电池光伏性能; 同时对电极催化反应速率主要与催化剂活性、 载Pt材料电导率和催化反应面积有关.     

含二级供电基团的三苯胺类光敏染料合成及太阳能电池中的应用

以N,N-二甲基苯胺作为二级给电子单元, 合成两种具有不同长度共轭链的三苯胺类光敏染料XS19和XS22. 研究了它们的光物理与光电化学性质, 并将它们用作TiO₂纳米晶电极的光敏化剂引入太阳电池, 结果表明, N,N-二甲基苯胺的引入能够抑制染料敏化太阳能电池中的电子复合, 提高电池的光电转换效率. XS22表现出更好的光伏性能, 在AM1.5 (100 mW•cm^－2)的光强下, XS22敏化电池的开路电压(V_OC)为685 mV, 短路电流密度(J_SC)为9.6 mA•cm^－2, 填充因子(FF)为0.72, 总光电转换效率为4.7%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.