羧甲基淀粉与烷基二甲基苄基氯化铵的相互作用研究

通过电导法、荧光法、粒度法等方法研究了羧甲基淀粉与3种不同碳数烷基二甲基苄基氯化铵之间的相互作用。结果表明,羧甲基淀粉与长链烷基二甲基苄基氯化铵在小于单纯表面活性剂临界胶束浓度（cmc）1～2个数量级的浓度下发生复合,并产生沉淀。当表面活性剂烷基链增加且浓度增大时,表面活性剂长碳链间的疏水作用及与羧甲基淀粉间的疏水作用...     

卵清蛋白与离子型表面活性剂的相互作用

本文通过荧光光谱法、紫外-可见吸收光谱法和透射电镜并结合电导率测定分别研究了水中卵清蛋白与阴离子表面活性剂十二烷基硫酸钠（SDS）和阳离子表面活性剂十二烷基三甲基溴化铵（DTAB）和十六烷基三甲基溴化铵（CTAB）之间的相互作用。研究结果表明卵清蛋白可以增加SDS和CTAB的临界胶束浓度,但对DTAB的临界胶束浓度没有影响。阴离子表面活性剂可以使卵清蛋白构象完全伸展,而阳离子表面活性剂却不具备此种作用。表面活性剂单体与卵清蛋白的相互作用强于表面活性剂胶束与卵清蛋白的相互作用。     

含酰胺基Gemini阳离子表面活性剂的合成及性能

以棕榈酸、N,N-二甲基丙二胺、环氧氯丙烷和脂肪胺为原料合成了一系列Gemini阳离子表面活性剂.用红外光谱、质谱对产品进行了结构分析,并对产品性能进行了测定.结果表明:所合成的Gemini阳离子表面活性剂的临界胶束浓度低于传统阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)1-2个数量级;当浓度为1×10-3mol/...     

羧甲基淀粉微球的制备及其对阿司匹林的控制释放

以马铃薯淀粉为原材料,水-乙醇为溶剂制备了羧甲基淀粉(CMS)。通过反相微乳液法包埋阿司匹林制备了载药羧甲基淀粉微球。通过热重、X-衍射以及扫描电镜对羧甲基淀粉进行了表征。结果显示,淀粉经过羧甲基改性后结晶度降低,聚集形态变得更加不规则,说明淀粉羧甲基后在水相中溶解度增大,有利于制备淀粉微球。将羧甲基淀粉与阿司匹林溶于水中,配成浓度为8%的水相溶液。以环己烷与氯仿的混合溶剂(V_(环己烷):V_(氯仿)=3:1)作为油相体系,经过反相乳化成球,实现了对阿司匹林的包埋。羧甲基淀粉微球经载药后呈圆形,表面光滑,粒径为200~800nm,且实现了在不同p H值溶液中对小分子药物的控制释放。有望用于口服药的载体,实现在体内的控制释放,从而增加药物利用率以及降低药物的副作用。     

表面活性剂对3-甲基吡啶电氧化制取烟酸的影响

研究了在阳极液中加入不同类型和不同浓度表面活性剂对3-甲基吡啶电氧化的影响. 结果表明, 十六烷基三甲基溴化铵、脂肪醇聚氧乙烯醚硫酸钠、十二烷基苯磺酸钠、十二烷基二甲基甜菜碱和山梨醇酐单硬脂酸酯的胶团对3-甲基吡啶电氧化有明显的促进作用. 实验结果还表明, 在低浓度的硫酸为支持电解质阳极液中加入表面活性剂与不加表面活性剂相比, 3-甲基吡啶电氧化制取烟酸的选择性和电流效率明显提高.     

疏水-亲脂作用对反应性的影响III:环糊精对碳氟表面活性剂的熵驱动包结以及亲脂作用对形成糖淀粉型包结物的贡献

用表面张力-浓度曲线法系统地研究了环糊精(CD)和羧甲基糖淀粉钠(Na-CMA)与H(CF2)12CO2K(1),Cl(CF2)nCH2CH2N^+(CH3)3I^-[n=8(3),10(5)]和相应的碳氢表面活性剂(2,4和6)的相互作用.由于几何尺寸的限制,碳氟表面活性剂不能与α-CD形成包结络合物,但3与β-CD形成的包结络合物的稳定性远大于相应的碳氢受物4、3与β-CD的相互作用是熵驱动过程,而C12H25N^+(CH3)3I^-(6)则是焓有利的.与具有"预组织化"内穴的CD不同,糖淀粉的包结是与大分子从线团到螺旋构象变化的协同过程,由于缺乏宿主-受物间的亲脂相互作用,Na-CMA不能与所有的碳氟受物形成包结络合物.     

水热法制备ZnS纳米线

以十六烷基三甲基溴化铵(CTAB)为表面活性剂，利用水热法通过二吡啶硫氰酸锌分解制备了ZnS纳米线，并用SEM、XRD、EDX和HR-TEM等方法对其纳米结构进行了表征。实验结果表明，反应时间和表面活性剂浓度是决定纳米ZnS最终形貌的关键因素，CTAB起到了纳米线生长的分子-诱导模板作用。     

CdTe量子点荧光法测定阳离子表面活性剂

合成了巯基乙酸(TGA)保护的水溶性发光CdTe量子点,并考察了此探针在阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)中的发光行为。根据观察到的发光猝灭效应,建立了一种简单的测定阳离子表面活性剂的方法。考察了CdTe量子点的浓度、体系酸度、反应时间及共存物质等对测定的影响。在最佳条件下,CdTe量子点发光强度与CTMAB的浓度分别在6×10-7~9.0×10-6mol/L和1.2×10-5~3.8×10-5mol/L范围内分段成线性关系。该方法用于水样的阳离子表面活性剂的测定,回收率为97%~102%。     

胶束电动毛细管色谱中的双峰及其成因

研究了以十六烷基三甲基溴化铵(或十二烷基硫酸钠)为准固定相的胶束电动毛细管色谱法中的双峰及其形成原因. 指出在一定的条件下一种组分可以出现2个峰. 实验表明, 某一组分相应双峰的相对峰面积取决于该组分与表面活性剂之间的反应时间与温度以及样品中表面活性剂的浓度. 当样品中表面活性剂浓度增加时, 双峰中一个峰的相对峰面积增加, 而另一个减小; 温度可以加速反应的过程. 这意味着被分析物与表面活性剂之间的相互作用是一个慢过程, 这种相互作用可以产生一种稳定的物质, 并导致双峰的形成. 十六烷基三甲基溴化铵与间羟基苯甲酸反应产物的红外与核磁共振光谱证实了这一点.     

高分子表面活性剂在固/液界面上的吸附形态

采用紫外光谱、XPS研究了羧甲基纤维素型高分子表面活性剂在硅胶 /水界面上的吸附形态 ,结果表明随着高分子表面活性剂溶液浓度增大 ,分子在硅胶表面的吸附由单层逐渐变为多层 ,生成半胶束结构 .     

两亲性阴离子HBPN与阳离子表面活性剂CTAB络合机理的研究

用动态光散射研究了两亲性阴离子HBPN(高度枝化的聚酯纳米微粒)和阳离子表面活性剂CTAB(十六烷基三甲基溴化铵)在缓冲液中的相互作用及HBPN/CTAB络合物的形成.结果表明:在静电作用下,于碱性溶剂中,HBPN与由CTAB分子所构成的胶束形成了核壳结构络合物HBPN/CTAB.络合物粒径的大小和稳定性可以通过溶液的pH值和CTAB浓度来控制.     

Influence of cetyltrimethylammonium bromide on physicochemical properties and microstructures of chitosan-TPP nanoparticles in aqueous solutions

The nanoparticles of chitosan (CS) were prepared using pentasodium triphosphate (TPP) as a crosslinking agent and the influences of cetyltrimethylammonium bromide (CTAB) on the physicochemical properties of the CS-TPP nanoparticles were first studied by laser light scattering, zeta potential, and transmission electron microscopy (TEM). The concentration played a significant role in controlling the particle size of CS and the overlap concentration c(*) was testified to be about 1.0 mg/mL. The combination of static light scattering (SLS) and dynamic light scattering (DLS) allowed us to obtain more information about the CS-TPP nanoparticles in the presence of surfactant molecules. The addition of CTAB could reduce the hydrodynamic diameter of nanoparticles effectively in the salt solutions and simultaneously increase the zeta potential of the nanoparticles. The effect of CTAB concentration on the size of CS-TPP nanoparticle was also examined. The critical micelle concentration (CMC) of CTAB was used to interpret the complicated complex formed by the polyelectrolyte and the surfactant. Finally, TEM was used to observe the CS-TPP nanoparticles, which were affected by CTAB, to verify the results obtained by light scattering.     

低浓度CTAB对血红蛋白与阿昔洛韦间相互作用与性质的影响

The effects of cetyltrimethylammonium bromide （CTAB） on the properties of hemoglobin （Hb） at low CTAB concentration were studied in Hb/acyclovir/CTAB system by the methods of UV-Vis spectrum, fluorescence, zeta potential, conductivity and negative-staining transmission electron microscope （TEM）. With the increase of CTAB concentration, the UV peak intensity at 276 nm, the intrinsic fluorescence, the zeta potential of Hb and the system conductivity were all enhanced. Hb was easily oxidized to oxyHb and hemichrome. In Hb/acyclovir/CTAB system, CTAB made the UV-Vis spectrum, fluorescence, conductivity and conformation of Hb tend to be returned to those of the original Hb but the zeta potential not to do so. The UV absorption peak of Hb-acyclovir complex disappeared and the tight structure of Hb aroused by acyclovir was refolded. When CTAB concentration was higher than 5 × 10 ^5 mol/L, the two absorption peaks at 536 and 576 nm appeared again, and the Hb structure became looser again.     

Cationic surfactant changes the morphology of DNA molecules

The effect of cetyltrimethylammonium bromide (CTAB), a cationic surfactant, was investigated on the aggregated form of DNA molecules in water at a given temperature. CTAB caused changes in the aggregated form of DNA molecules from loosely packed spherical to rodlike through toroidal one with increasing concentration below the critical micelle concentration (CMC). The change was suggested to arise from the ion complex formation between CTAB and DNA molecules due to the electrostatic interaction, thereby reducing the surface charge and solubility in water of the latter.     

Study on the fluorescence behavior of p-sulfonated calix[4,6]arene in cationic surfactant cetyltrimethylammonium bromide solution and its analytical application

The fluorescence properties of p-sulfonated calix[4,6]arene (SCnA, n=4, 6) in cationic surfactant cetyltrimethylammonium bromide (CTAB) solution were investigated. It was found that the fluorescence intensity of SCnA could be enhanced markedly by an appropriate amount of CTAB. The results indicate the formation of complex between CTAB and SCnA at a 1:1 complex stoichiometry and their association constants were calculated by applying a deduced equation. Based on the obtained results, a new fluorimetric method has been developed for rapid determination of SCnA with a good linearity in the concentration range of 2x10(-7) to 7x10(-6)mol L-1.     

环糊精与表面活性剂主客体作用诱导的金纳米棒可控自组装

The self-assembly of colloidal nanocrystals has emerged as a powerful strategy for the bottom-up fabrication of functional materials and nanodevices. Recently, the self-assembly of gold nanorods (GNRs) has attracted significant attention because of their unique plasmonic properties, but the realization of their adjustable self-assembly of GNRs through facile and effective approaches remains challenging. In this work, the controllable self-assembly of GNRs in aqueous solution was realized through the host-guest interactions of cyclodextrins (CDs) and the cetyltrimethylammonium bromide (CTAB) molecules adsorbed on the surface of the GNRs. The self-assembly of GNRs was readily achieved by the addition of aqueous α-CD solutions with varied concentrations into aqueous dispersions of CTAB-stabilized GNRs. At a relatively low α-CD concentration, slow aggregation of the GNRs occurred, resulting in their side-by-side assembly. This was revealed by the blue shift of the longitudinal surface plasmon resonance (LSPR) band in the absorption spectra and confirmed by transmission electron microscopy (TEM) observations. On the other hand, when a higher concentration of α-CD was added, fast aggregation of the GNRs occurred, resulting in their end-to-end assembly. This was revealed by the red shift in the LSPR band together with the TEM observations. If β-CD was employed instead of α-CD, the self-assembly of GNRs could also be induced, although a relatively higher concentration of β-CD was required to achieve the extent of aggregation similar to that induced by α-CD, indicating that the supramolecular host–guest interaction between CDs and the surfactant CTAB was crucial to the directed self-assembly of GNRs. Furthermore, the α-CD-induced assembly was inhibited on addition of excess CTAB, confirming that the supramolecular interaction of α-CD and CTAB played a key role in directing the self-assembly of the GNRs. Based on these experimental results, a possible mechanism for the α-CD-induced self-assembly of GNRs was proposed as follows: at a lower α-CD concentration, the gradual formation of the host-guest inclusion complex α-CD/CTAB led to the partial replacement of the highly charged CTAB bilayers adsorbed on the GNRs by the less charged complex, which resulted in a slow side-by-side assembly of the GNRs; at a higher α-CD concentration, the CTAB bilayers were quickly replaced by the α-CD/CTAB complex, and the CTAB molecules adsorbed at both ends of the GNRs were almost completely replaced, resulting in a fast end-to-end assembly of the GNRs. Additionally, on the basis of the hydrolysis of α-cyclodextrin catalyzed by α-amylase, the self-assembly of GNRs directed by the host-guest interaction could be used to realize the feasible detection of α-amylase in solutions. This self-assembly strategy mediated by the host-guest interaction may be extendable to other colloidal systems involving surfactants adsorbed on the surface of nanoparticles, and may open new avenues for the controllable self-assembly of non-spherical nanoparticles.     

明胶和阳离子表面活性剂CTAB的相互作用

采用电导法、荧光法、pH等方法研究了明胶与十六烷基三甲基溴化铵 (CTAB)的相互作用.结果表明,在CTAB/明胶 /水体系中,明胶浓度的增大使得CTAB分子的cac₁,cac₂,cmc值均上升,胶束的聚集数下降.冷冻蚀刻透射电镜实验(FFTEM)的结果证实了明胶分子与CTAB分子之间形成了复合物,随着CTAB浓度的增加,结构从线状、卷曲、珍珠项链状、棒状至网状依次变化.     

Multi-technique approach on the effect of surfactant concentrations on the thermal unfolding of rabbit serum albumin: Formation and solubilization of the protein aggregates

Effect of cationic surfactant, cetyltrimethylammonium bromide (CTAB) addition on the thermal denaturation of rabbit serum albumin (RSA) has been studied by employing small-angle neutron scattering (SANS), circular dichroism (CD), intrinsic fluorescence and ultra violet (UV) spectroscopy. The studies were performed at three different temperatures viz., 30, 50 and 70 °C and at two different concentrations of CTAB: the low concentration of CTAB used was 1 mM and the higher concentration was 80 mM (for SANS) and 20 mM (for CD, fluorescence and UV). A collective effect of high temperature and low concentration of CTAB led to the protein aggregation followed by solubilization of these aggregates at higher concentration of surfactant. At 1 mM CTAB and 30 °C, the protein–surfactant complex has a prolate ellipsoidal shape with semi-major axis of 88.9 Å and semi-minor axis of 19.6 Å which are slightly greater than the values of the native RSA. At 50 °C, the size of the semi-major axis increases while at 70 °C an increase in the size of both axes was found. The thermal outcome at higher concentration of CTAB (80 mM) was rather different. Higher concentration of CTAB unfolds the protein by the formation of micelle-like aggregates along the polypeptide chains of the protein and the complex was stabilized at higher temperatures, which was not found with lower concentration of CTAB. The CD results were found to be consistent with the SANS results, i.e., decrease in α-helicity of RSA was more when less amount of surfactant was present as compared to the system with higher surfactant concentration. In a similar fashion, results of relative fluorescence intensity (RFI) reveal that increase in temperature causes decrease in λ_max of native RSA as well as RSA + 1 mM CTAB, whereas the λ_max remains unchanged for RSA + 20 mM CTAB systems. That means the structure remains compact in presence of 20 mM CTAB while the structure becomes loose when low or zero amount of surfactant was present. The UV results indicate that the protein aggregation takes place in presence of low amount of CTAB and these aggregates become soluble at high concentration of CTAB.     

Vesicle formation in aqueous mixture of the cetyltrimetylammonium bromide and an anionic chitosan derivative

The present work aimed at research the physic-chemical properties of the interaction of N-decyl-O-chitosan sulfate (an amphiphilic chitosan derivative, C₁₀-OCHS) with cetyltrimetylammonium bromide (CTAB) by the steady-state fluorescent, static/dynamic surface tension, turbidity and transmission electron microscopy (TEM). The results showed that the complex of C₁₀-OCHS/CTAB had high surface activity and lower critical aggregation concentration. Besides, the C₁₀-OCHS/CTAB could self-assemble into various aggregates like irregular spherical aggregates, vesicles or polydisperse aggregates from lower to higher concentrations of CTAB with a mixed C₁₀-OCHS concentration of 200?mg/L.     

气/液界面上β-环糊精与十六烷基三甲基溴化铵包结物形成的分子动力学模拟

利用分子动力学模拟的方法从分子水平上研究了气/液界面上β-环糊精(β-CD)与十六烷基三甲基溴化铵(CTAB)包结物的形成. 对β-CD与CTAB摩尔比分别为1∶1和2∶1的两个体系进行了模拟研究, 体系的能量、径向分布函数和均方根位移变化的结果表明, β-CD与CTAB分子可以在气/液界面上形成包结物, 相对而言, 更易形成1∶1型包结物.