美托洛尔球形分子烙印聚合物的制备及吸附性能考察

以聚苯乙烯乳液为种球，以药品美托洛尔为模板分子，甲基丙烯酸为功能单体，二甲基丙烯酸乙二醇酯为交联剂，采用两步溶胀和种子悬浮聚合方法，通过优化反应条件，制得单分散性优良的球形分子烙印聚合物（molecularly imprinted polymers，MIPs）。重点讨论了致孔剂、分散剂和乳化剂的选择、搅拌速度对聚合物的粒径大小和分布、表观形态及吸附性能等的影响。通过聚合物对几种β-受体类药物分子的平衡吸附实验表明，MIP对模板分子美托洛尔具有良好的识别能力。     

ATRP法制备两亲性嵌段共聚物的研究

以α 溴代丙酸乙酯 (EPN Br)为引发剂、氯化亚铜 (CuCl)和联二吡啶 (bpy)组成的混合体系为催化剂 ,引发苯乙烯聚合 ,得到了端基为卤原子的单分散聚苯乙烯 (PS X)预聚体 .以此PS X为大分子引发剂、CuCl和N ,N ,N′ ,N″ ,N″ 五甲基二亚乙基三胺 (PMDETA) bpy的混合体系为催化剂 ,引发N ,N 二甲基丙烯酰胺(DMAA)聚合 ,得到了分子量分布较窄的聚苯乙烯 b 聚N ,N 二甲基丙烯酰胺 (PS b PDMAA)两亲性嵌段共聚物 .考察了大分子引发剂的分子质量、聚合介质及配位剂等对聚合过程的影响 .并用GPC、IR、1 H NMR等对产物进行了表征 .研究结果表明 ,该聚合反应体系符合原子转移自由基聚合的特征 .     

ABA型两亲嵌段共聚物的合成及表征

以α ,α′ 二溴代二甲苯为引发剂 ,CuBr/2 ,2′ 联吡啶为催化体系 ,制备了双溴端基的分子量分布窄的聚苯乙烯 (MWD =1 18) .再以此作为大分子引发剂 ,实现了甲基丙烯酸对硝基苯酯的原子转移自由基聚合 ,制得了分子量可控且分子量分布窄的ABA型嵌段共聚物 ,再经水解、酸化 ,得到了聚甲基丙烯酸 b 聚苯乙烯 b 聚甲基丙烯酸ABA型两亲嵌段共聚物     

丙烯腈-苯乙烯嵌段共聚物的RAFT聚合与表征

以S,S'-二(α,α '-二甲基-α″-乙酸)三硫代碳酸酯(TRIT)为链转移剂,利用可逆加成断裂链转移自由基聚合(RAFT)制备了窄分布的端羧基大分子链转移剂——聚苯乙烯和聚丙烯腈.以大分子链转移剂为RAFT试剂,引发苯乙烯或丙烯腈单体的RAFT聚合,进一步得到聚丙烯腈-聚苯乙烯-聚丙烯腈(PAN-b-PS-b-PAN)和聚苯乙烯-聚丙烯腈-聚苯乙烯(PS-b-PAN-b-PS)三嵌段共聚物.通过1 H-NMR、FT-IR、凝胶渗透色谱(GPC)对所得产物的结构和分子量进行了袁征,通过原子力显微镜(AFM)和拉曼光谱(Raman)研究了嵌段共聚物薄膜的微相分离结构与热解行为.结果表明:所得产物中除PAN-b-PS-b-PAN外,分子量分布均小于1.2.嵌段共聚物薄膜经250℃热稳定化与600℃热解处理后,碳化并形成了规整的石墨结构,微区尺寸在75 nm左右.     

温敏聚苯乙烯接枝聚异丙基丙稀酰胺梳型共聚物的合成

采用氯化亚铜为催化剂, 1,1,4,7,10,10-六甲基三亚乙基四胺(HMTETA)为配体, 溴代聚苯乙烯为大分子引发剂,以异丙基丙稀酰胺为单体进行原子转移自由基聚合(ATRP), 合成窄分布的聚苯乙烯接枝聚异丙基丙稀酰胺聚合物. 红外光谱(IR)和氢核磁共振波谱(1H NMR)证明了接枝聚合物的结构. 凝胶渗透液相色谱(GPC)(用聚苯乙烯作为标样)研究发现, 接枝共聚物的分子量分布是单分散的, 数均分子量为19815 g/mol. 差示扫描量热法(DSC)研究表明, 由于疏水的异丙基和胺基的氢键作用, 接枝共聚物的玻璃化转变温度比作为原料的聚苯乙烯提高了16.0℃. 报道了温敏的以溴代聚苯乙烯为骨架的接枝共聚物的成功制备.     

ATRP法合成结构对称的双羧基聚苯乙烯及其超分子的形成

从二甲苯出发,经过溴甲基化反应、氧化反应、酯化反应和溴代反应,合成了一种四官能团的引发剂,4,6-二(溴甲基)-1,3-苯二甲酸二甲酯.用该引发剂引发苯乙烯进行原子转移自由基聚合,实验结果表明聚合反应具有活性自由基聚合的特征.通过苯乙烯的本体聚合反应获得了分子量可控、双酯基位于聚合物链中间的聚苯乙烯.经过水解反应,使聚合物中的双酯基被水解成双羧基,从而得到了结构对称的两亲性聚合物,双羧基聚苯乙烯.利用该聚合物具有分子识别的特性,与十二烷胺形成了离子键超分子化合物.此工作为超分子星形聚合物的设计合成提供了简便快捷的方法.     

星形支化聚苯乙烯模型化合物的合成及表征

本文用阴离子聚合方法,首先合成了线形‘活’的聚苯乙烯大分子阴离子,然后用二乙烯基苯为偶联成核剂,制备了十三个4-80臂较窄分子量分布的等臂长规则星形支化聚苯乙烯的模型化合物,并用GPC—粘度计联用装置对之进行了表征。     

采用反应挤出三次加料法合成苯乙烯/异戊二烯/苯乙烯

以同向啮合双螺杆挤出机为反应器,采用苯乙烯和异戊二烯为聚合单体,以正丁基锂为引发剂,采用三次加料法合成苯乙烯/异戊二烯/苯乙烯(SIS)三嵌段热塑性弹性体.氢核磁共振(1H NMR)谱分析结果表明,共聚物中聚异戊二烯嵌段以1,4-结构为主.采用四氧化锇催化双氧水氧化降解聚合物分子链,利用凝胶渗透色谱对氧化降解后的聚苯乙烯碎片进行分析,证明共聚物分子为(聚苯乙烯-聚异戊二烯-聚苯乙烯)(PS-PI-PS)三嵌段结构.动态力学分析(DMA)及透射电子显微镜(TEM)分析结果表明,SIS具有两相分离结构.拉伸试验结果表明,共聚物拉伸强度与苯乙烯含量有关.     

链转移剂单体存在下苯乙烯乳液聚合反应研究

以α-甲基丙烯酸-3-巯基己酯(MHM)为链转移剂单体,过硫酸钾(KPS)为引发剂,十二烷基苯磺酸钠(LAS)为乳化剂,通过乳液聚合合成支化聚苯乙烯(BPSt).采用1H-NMR和三检测体积排除色谱(TD-SEC)对聚合反应过程和合成的聚合物进行了表征分析.结果表明,在合适的乳化剂用量、引发剂用量和聚合反应温度等条件下,反应初期生成的初级链可以完全转化成支化聚合物,在高单体转化率下不发生交联得到较窄分子量分布的高分子量支化聚苯乙烯(Mn,SEC1.4×105,Mw,MALLS2.0×106,PDI4.5),而且所得聚合物表现出很高的支化程度(g'=0.5~0.6).     

乙烯基苯乙基聚苯乙烯大单体的合成与表征

以工业二乙烯基苯(DVB)作封端剂,用活性阴离子聚合方法首次成功地合成了乙烯基苯乙基聚苯乙烯大单体,讨论了封端时间、温度、活性种分子量、四氢呋喃及封端剂用量对合成效率的影响.结果表明:大单体的分子量与设计值很接近,分子量分布较窄,其数均官能度在0.9—1.1之间,偶联率小于10％.     

纳米氧化硅表面阴离子接枝聚合苯乙烯

通过正丁基锂(BL)引发甲基丙烯酰氧丙基纳米氧化硅(MAMSN)与苯乙烯共聚，制备了聚苯乙烯表面接枝纳米氧化硅(PS—g—Silica)，并考察了正丁基锂加入量对苯乙烯转化率(C)、接枝率(PG)以及聚苯乙烯分子量(Mn)的影响。实验结果表明，阴离子聚合可以获得比自由基聚合更大的分子量和更高的转化率以及接枝率。     

H_2O/TiCl_4/Py体系引发苯乙烯正离子聚合

研究了在少量吡啶(Py)存在下由水(H2O)四氯化钛(TiCl4)体系引发苯乙烯于二氯甲烷正己烷中进行碳正离子聚合,分别考察[Py]、[H2O]和[TiCl4]对聚合速率、产物分子量与分子量分布的影响.实验结果表明,少量亲核试剂吡啶(Py)对聚合反应起着重要作用,可有效地降低聚合速率和使分子量分布变窄;随着[H2O]和[Py]降低或[TiCl4]增加,聚合产物的分子量增加,而分子量分布指数(Mw Mn)基本维持在1.8左右;随着[Py]增加,聚合速率降低;随着[H2O]和[TiCl4]增加,聚合速率提高.聚合速率对单体浓度呈一级动力学关系,对Py、H2O和TiCl4的反应级数分别为-0.72、0.72和1.86.聚合速率对TiCl4浓度呈接近二级动力学关系,这可能与体系中TiCl4主要以二聚体形式存在有关.聚合转化率和产物分子量均随着反应时间延长而逐渐增大,PS的数均分子量与转化率呈线性增加关系.     

Evaluation of mass discrimination effects in the quantitative analysis of polydisperse polymers by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry using uniform oligostyrenes

Mass discrimination effects in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) were quantitatively investigated using equiweight and equimolar mixtures of uniform polystyrene (PS) oligomers. Uniform PS oligomers were separated by preparative super-critical fluid chromatography (SFC) from commercial standard PS samples. The separated PS oligomers, with degrees of polymerization n = 2–25, have absolutely no molecular weight distributions. Equiweight and equimolar mixtures of uniform PS oligomers were accurately prepared by weighing by microbalance, and their spectra were recorded using a MALDI-TOF mass spectrometer. In the lower molecular weight region (less than about 10³) the oligomers with lower molecular weights give lower mass spectral intensities, with no correlation with laser power. In contrast, higher laser powers yield a decrease of mass spectral intensities in the higher molecular weight region. These results clearly show that mass discrimination effects occur at lower and higher molecular weights depending on the laser power, and provide quantitative information about the discrimination. Using the data on equiweight and equimolar mixtures of PS oligomers, it was possible to calibrate the MALDI-TOF mass spectral data for an analysis of molecular weight distribution of a standard monodisperse PS sample with number-averaged molecular weight of 10³, and to compare it with the molecular weight distribution measured by analytical SFC. The result from the calibrated MALDI-TOF mass spectrum, however, does not agree perfectly with that from the SFC results, because undetectable peaks in MALDI-TOF mass spectra at lower and higher molecular weights could not be included in the calibration of peak intensities. Copyright © 2001 John Wiley & Sons, Ltd.     

蒙脱土负载型引发剂的制备及在苯乙烯乳液聚合中的应用

通过正离子交换将引发剂AIBA负载在蒙脱土上制得负载型引发剂V50-MMT.进而采用原位乳液聚合方法引发苯乙烯聚合制备PS/MMT纳米复合材料.采用XRD、TGA、DSC、TEM和抽提等方法对负载型引发剂和纳米复合材料进行了表征.结果表明,负载过程中引发剂AIBA进入了MMT的片层之间;聚合过程中介于片层间的引发剂因发生分解一方面产生自由基引发St聚合,另一方面MMT发生了剥离分散;由此法制备的PS/MMT纳米复合材料,MMT片层无规、均匀地分散于PS基体中,片层厚度在几个纳米至十几个纳米之间,长度为几十至几百个纳米不等;大量的PS链段以化学键接枝在MMT的片层上,接枝在MMT片层上的PS的分子量及其分布与游离的PS不同.     

Preparation of polystyrene/montmorillonite nanocomposites using a new radical initiator-montmorillonite hybrid via in situ intercalative polymerization

Polystyrene/montmorillonite (PS/MMT) nanocomposites were prepared by in situ free radical intercalative polymerization, using 1, 3 and 5 wt% of a new cationic radical initiator-MMT hybrid. The corresponding nanocomposites were designated as PS/MMT-1, PS/MMT-3 and PS/MMT-5, respectively. The silicate layers were well exfoliated and randomly dispersed in the PS/MMT-1 and PS/MMT-3, but were less exfoliated in the PS/MMT-5, due to the predominant extra-gallery polymerization over the intra-gallery polymerization. The unique properties of nanocomposites resulted from the strong interactions between the nano-sized silicate layer surfaces and the polymer chains. The onset temperature of thermal degradation, and the glass transition temperature, increased with increasing hybrid content, up to 3 wt%. The molecular weights of the PS in the PS/MMT-1 and PS/MMT-3 were less than those calculated theoretically, due to the predominant intra-gallery polymerization.     

超声辐照原位乳液聚合制备聚苯乙烯包覆碳纳米管复合材料的结构与性能

采用超声辐照原位乳液聚合方法制备了聚苯乙烯(PS)包覆多壁碳纳米管(MWNTs)复合材料. 用TEM, FTIR, UV, XPS, GPC和TGA研究了复合材料的结构和性能. 结果表明, MWNTs对苯乙烯聚合过程具有抑制作用, 聚苯乙烯包覆MWNTs, 两者之间有较强的相互作用, 使复合材料的热性能得到改善, 起始分解温度从388 ℃提高到422 ℃.     

A Facile Synthesis of Cleavable Block Copolymers via Tandem Polymerizations of NMRP and ATRP

A functionalized compound, 4‐(2‐bromoisobutyryl)‐2,2,6,6‐tetra‐methylpiperidine‐1‐oxyl (Br‐TEMPO), was synthesized and used to synthesize block copolymers through tandem nitroxide‐mediated radical polymerization (NMRP) and atom transfer radical polymerization (ATRP). First, Br‐TEMPO was used to mediate the polymerization of styrene. The kinetics of polymerization proved a typical “living” nature of the reaction and the effectiveness in the mediation of polymerization of Br‐TEMPO. Then the PS‐Br macroinitiator was used to initiate atom transfer radical polymerization (ATRP). A series of acrylates were initiated by PS‐Br macroinitiators in typical ATRP processes at various conditions. The controlled polymerization of ATRP was also confirmed by molecular weight and kinetic analysis. Several cleavable block copolymers of PS‐b‐P(t‐BA), PS‐b‐P(n‐BA), and PS‐b‐PMA, with different molecular weights, were synthesized via this strategy. Relatively low polydispersities (<1.5) were observed and the molecular weights were in agreement with the theoretical ones. Hydrolysis of PS‐b‐P(t‐BA) was carried out, giving amphiphilic block copolymer PS‐b‐PAA without the cleavage of C‐ON bond or ester bond. All the block copolymers have two T_gs as demonstrated by DSC. A typical cleavable block copolymer of PS‐b‐PMA was cleaved by adding phenylhydrazine at 120°C to produce homopolymers in situ.     

Controlling the Molecular Weight and Molecular Weight Distribution using Compressed CO2 Antisolvent

High-pressure gases are quite soluble in organic solvents and expand them largely1, which can reduce the solvent strength of a solvent to such an extent that a solid dissolved in the solvent is precipitated. This process is called gas antisolvent process (GAS). GAS process has been used in recrystallization of organic solids2, preparation of ultrafine particles5, 4. The applications of GAS are based on the fact that the composition of a gas-liquid solution changes with pressure of the gas, …     

The analysis of industrial synthetic polymers by electrospray droplet impact/secondary ion mass spectrometry

Electrospray droplet impact (EDI)/secondary ion mass spectrometry (SIMS) is a new desorption/ionization technique for mass spectrometry in which highly charged water clusters produced from the atmospheric‐pressure electrospray are accelerated in vacuum by several kV and impact the sample deposited on the metal substrate. In this study, several industrial synthetic polymers, e.g. polystyrene (PS) and polyethylene glycol (PEG) were analyzed by EDI/SIMS mass spectrometry. For higher molecular weight analytes, e.g. PS4000 and PEG4600, EDI/SIMS mass spectra could be obtained when cationization salts are added. For the polymers of lower molecular weights, e.g. PEG300 and PEG600, they could be readily detected as protonated ions without the addition of cationization agents. Anionized PS was also observed in the negative ion mode of operation when acetic acid was added to the charged droplet. Compared to matrix‐assisted laser desorption/ionization (MALDI), ion signal distribution with lower background signals could be obtained particularly for the low‐molecular weight polymers. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of poly(n‐butyl acrylate) homopolymer and poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) triblock copolymer via AGET emulsion ATRP using a cationic surfactant

Cationic emulsions of triblock copolymer particles comprising a poly(n‐butyl acrylate) (PⁿBA) central block and polystyrene (PS) outer blocks were synthesized by activator generated by electron transfer (AGET) atom transfer radical polymerization (ATRP). Difunctional ATRP initiator, ethylene bis(2‐bromoisobutyrate) (EBBiB), was used as initiator to synthesize the ABA type poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) (PS‐PⁿBA‐PS) triblock copolymer. The effects of ligand and cationic surfactant on polymerizations were also discussed. Gel permeation chromatography (GPC) was used to characterize the molecular weight (M_n) and molecular weight distribution (MWD) of the resultant triblock copolymers. Particle size and particle size distribution of resulted latexes were characterized by dynamic light scattering (DLS). The resultant latexes showed good colloidal stability with average particle size around 100–300 nm in diameter. Glass transition temperature (T_g) of copolymers was studied by differential scanning calorimetry (DSC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 611–620