次卟啉二甲酯钴络合物均相选择性催化氧化环己烷

以次卟啉二甲酯钴[Co(DPDME)]为仿生催化剂,分子氧（空气）为氧给体,无其它辅助催化剂的条件下研究了催化氧化环己烷的反应。考察了反应温度、空气压力、催化剂用量和卟啉配体结构对醇酮的产率及选择性的影响。结果表明,在相同条件下,次卟啉二甲酯钴的催化活性明显高于其它的钴卟啉催化剂。以次卟啉合钴为催化剂,浓度为0.015 mmol/L,反应温度423 K,在空气压强为0.8 MPa的条件下反应5 h,环己烷的转化率达到18.17％,选择性为87.43％。温度对次卟啉钴的催化活性影响较大,温度高于443 K时,催化剂的稳定性降低,但是其转化数仍达到了66 646。对次卟啉二甲酯钴催化空气氧化环己烷的反应路径作了初步探讨。     

吸电子和亲水性Co-卟啉促进电催化氧还原反应的研究

研究影响电催化氧还原反应活性的因素对于合理设计高效的氧还原反应催化剂至关重要。调节催化剂电子结构通常被用于精确调控电催化氧还原反应活性。然而, 该反应发生在液/气/固界面, 很少有报道调控分子催化剂的亲疏水性来提高其催化活性。在此, 我们报道了两种钴卟啉NO₂-CoP（5,10,15,20-四（4-硝基苯基）钴卟啉）和5F-CoP（5,10,15,20-四（五氟苯基）钴卟啉）并研究了其电催化氧还原反应性能。通过同时调控meso-位取代基的电子结构和亲水性能, NO₂-CoP显示出比5F-CoP更高的电催化氧还原反应活性, 其半波电位向阳极方向移动近60 mV。NO₂-CoP比5F-CoP具有更好的亲水性。理论计算表明, NO₂-CoP比5F-CoP更容易有效地与O₂分子结合形成Co^III-O₂^·-。这项工作提供了一个简单而有效的策略, 通过使用吸电子和亲水取代基来提高钴卟啉的氧还原反应活性。该策略对于设计和开发其他用于电催化的分子催化剂体系也具有重要的启发意义。     

固载化阳离子金属卟啉/杂多阴离子复合催化剂在分子氧氧化乙苯过程中的催化特性

以交联聚苯乙烯微球(CPS)为基质载体, 采用同步合成与固载的方法, 简捷地制得了固载化阳离子苯基卟啉, 继而通过与钴盐的配合反应, 制备了固载化阳离子钴卟啉. 在此基础上, 以Keggin 型杂多酸磷钨酸(HPW)及磷钼酸(HPMo)为试剂, 凭借阳离子钴卟啉(CoP)与杂多阴离子之间的静电相互作用, 制备与表征了固载化的由阳离子钴卟啉与杂多阴离子复合而成的固体催化剂CoPPW-CPS和CoPPMo-CPS. 将两种复合催化剂用于分子氧氧化乙苯的氧化反应, 考察研究了催化特性. 结果表明: 在分子氧氧化乙苯的氧化反应中, 复合催化剂具有很高的催化活性, 可使乙苯高选择性地转化为苯乙酮, 反应12 h, 苯乙酮的产率达30.1%; 复合催化剂的催化活性比单纯的固载化钴卟啉高75%; CoPPW-CPS的催化活性高于CoPPMo-CPS. 在复合催化剂结构组分中, 固载化的杂多阴离子并无催化活性, 起催化作用的组分是钴卟啉; 但是, 杂多阴离子可有效保护钴卟啉, 使其免于被氧化失活, 从而使其保持稳定的高催化活性. 复合催化剂具有最适宜的投加量, 过量催化剂的加入, 会抑制钴卟啉的催化活性. 复合催化剂还具有良好的循环使用性能.     

在聚合物微球 GMA/MMA 表面同步合成与固载卟啉及固载化金属卟啉的催化氧化性能

 制备了甲基丙烯酸缩水甘油酯 (GMA) 与甲基丙烯酸甲酯 (MMA) 共聚微球 GMA/MMA, 并通过键合有对羟基苯甲醛 (HBA) 的改性微球 HBA-GMA/MMA 与苯甲醛 (或取代苯甲醛) 以及吡咯间的 Adler 反应, 实现了卟啉在共聚微球 GMA/MMA 表面的同步合成与固载, 制得了固载有苯基卟啉 (PP)、对氯苯基卟啉 (CPP)、对硝基苯基卟啉 (NPP) 的功能化微球 PP-GMA/MMA, CPP-GMA/MMA 和 NPP-GMA/MMA. 重点考察了影响卟啉同步合成与固载过程的因素. 制备了固载有钴卟啉的催化剂, 并以分子氧氧化乙苯为模型反应, 考察了催化剂的活性. 结果表明, 苯甲醛取代基的结构、催化剂的酸性和溶剂的极性对卟啉的同步合成与固载都有较大的影响; 钴卟啉催化剂对分子氧氧化乙苯反应具有较高的催化活性, 且当钴卟啉外环上含有强吸电子基团硝基时, 催化剂活性最高.     

钴卟啉的合成及其对氧还原的电催化性能

 合成了四苯基卟啉及其钴配合物,考察了催化剂、溶剂及反应温度等因素对四苯基卟啉收率的影响,并用红外光谱和核磁共振氢谱对合成产物进行了结构表征. 以X射线光电子能谱为主要手段,研究了不同热处理温度对钴卟啉结构的影响,通过测定空气电极极化曲线研究了热处理对钴卟啉催化活性的影响. 结果表明,在200 ℃, 以对硝基苯甲酸为催化剂,硝基苯为溶剂时,四苯基卟啉收率达32%. 热处理能提高金属卟啉的催化活性, 600 ℃热处理后,钴卟啉环中的 Co-N4 结构趋于键断裂的临界状态,催化活性点增多,催化活性较好; 而800 ℃处理的钴卟啉中部分 Co-N4 键破裂,催化活性下降.     

在交联聚苯乙烯微球表面实现苯基卟啉的同步合成与固载

以键合有对羟基苯甲醛(HBA)的交联聚苯乙烯(CPS)微球HBA-CPS、苯甲醛和吡咯为反应物, 采用Adler方法, 实现了苯基卟啉(PP)在CPS表面的同步合成与固载, 制得了固载有苯基卟啉的微球PP-CPS. 研究了卟啉同步合成与固载过程的影响因素, 同时进行了微球PP-CPS与钴盐的配合反应, 制备了固载有钴卟啉(CoP)的功能微球CoP-CPS, 初步考察了其对分子氧氧化乙苯的催化活性. 实验结果表明, 在苯基卟啉同步合成与固载的反应过程中, 催化剂的酸性与溶剂的极性是两个主要的影响因素, 使用强极性溶剂与pKa在2.8~3.4范围的酸, 微球PP-CPS表面的苯基卟啉固载量高. 微球CoP-CPS对分子氧氧化乙苯的反应具有明显的催化活性.     

四苯基钴卟啉化合物催化过亚硝酸根分解的研究

利用紫外-可见分光光度计在乙醇介质中研究了合成的4种对位取代四苯基钴卟啉对过亚硝酸根分解的催化作用. 首次发现钴卟啉可以催化ONOO^－分解, 且对位带吸电子基团的钴卟啉比对位带供电子基团的钴卟啉催化活性高. TPPCoCl, T(p-CH₃)PPCoCl, T(p-OCH₃)PPCoCl和T(p-Cl)PPCoCl在乙醇中的k_cat分别为1.69×10², 1.52×10², 1.43×10²和1.20×10³ mol^－1•L•s^－1. 动力学曲线和时间分辨谱证明这些钴卟啉是通过形成中间体催化过亚硝酸根分解的.     

四羰基钴/咪唑离子液体在羰基化合成丙二酸二甲酯反应中的催化性能

采用原位法合成了不同类型的四羰基钴/咪唑离子液体催化剂, 并考察了其在氯乙酸甲酯羰基化反应中的催化性能. 研究了咪唑环上不同支链对催化活性的影响. 结果表明, 1-丁基-3-甲基咪唑羰基钴离子液体[Bmim][Co(Co)₄]不仅催化活性高, 选择性好, 而且对空气和水有较好的稳定性能. 在p_CO=2.0 MPa, 85 ℃, 反应3 h的条件下, [Bmim][Co(Co)₄]催化剂循环使用4次, 氯乙酸甲酯的平均转化率为94.3%, 丙二酸二甲酯的平均选择性和平均产率分别为98.5%和92.9%. 与传统的Na[Co(Co)₄]催化剂相比, [Bmim][Co(Co)₄]催化剂在保证高活性的条件下可以实现羰基钴催化剂的直接循环使用.     

热处理温度对钴卟啉负载碳黑电催化剂的结构及氧还原性能的影响

制备了钴卟啉负载碳黑催化剂(CoTMPP/BP2000)用于燃料电池阴极氧还原反应. 利用循环伏安法研究了200～900 ℃热处理温度对催化性能的影响. 研究结果表明, 热处理能够提高CoTMPP/BP2000的催化活性, 热处理温度为900 ℃时, 催化剂的氧还原能力最好. 利用紫外-可见光谱、透射电镜、红外光谱、热重分析及X射线光电子能谱等手段研究了热处理温度对催化剂结构的影响. 结果表明, 热处理改变了催化剂的活性中心结构, 400 ℃以上热处理使催化剂中钴卟啉环的结构坍塌, Co—N4键断裂; 900 ℃高温下形成了稳定的Co—Nx—C结构, 新的活性位使催化剂的氧还原能力得到提高.     

卟啉化合物的研究 Ⅵ.双环双金属钴卟啉的合成

金属卟啉配合物对氧还原反应有良好的电催化活性,是一种高效的氧还原反应催化剂.查全性等的研究表明,四对甲氧苯基钴卟啉配合物对氧还原反应有很好的电催化活性和稳定性,是适用于广泛pH范围的氧化还原反应催化剂.Collman等发现双环双金属卟啉配合物比单环单金属卟啉的催化活性好,这可能是由于两个卟啉环和两个中心金属离子协同作用的结果.Collman和Anson等合成了一系列“面-面”双环双金属卟啉配合物,并用于催化氧还原反应,发现它们可催化氧还原的四电子反应,将氧分子直接还原成水,可极大限度地     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.