依赖色谱保留时间的智能化选择反应监测质谱方法的建立及其初步应用

建立了依赖色谱保留时间的智能化选择反应监测质谱方法,并与非依赖色谱保留时间的智能化选择反应监测质谱分析方法对不同体系(牛血清白蛋白酶切物、6种标准蛋白质混合物酶切物、腾冲嗜热菌蛋白提取液酶切物)的分析结果进行了系统比较。结果表明,引入色谱保留时间后的智能化选择反应监测质谱方法能够显著提高肽段及蛋白质的鉴定量,并且在复杂体系（如腾冲嗜热菌蛋白提取液酶切物）中效果尤为明显,鉴定到的肽段及蛋白质的覆盖率可分别达到目标肽段和蛋白质数量的89.62%和92.41%,并且灵敏度高、重复性好,能够实现对质荷比相同但保留时间有差异的肽段的准确鉴定。该方法将在复杂生物样本目标蛋白质组高通量、高灵敏度的鉴定、验证和确认中发挥独特作用。     

用非离子去污剂提高胶内酶切效率的初探

在蛋白质组学研究中,蛋白质混合物样品通常采用二维凝胶电泳分离,然后用生物质谱鉴定,其中蛋白质的胶内酶切是关键的一步,它对获得的数据的质量和鉴定结果有较大的影响。本研究旨在改进胶内酶切方法,拟在胶内酶切时加入非离子去污剂,来提高胶内酶切的效率。实验结果表明非离子去污剂的去折叠和增加蛋白质的溶解度的作用明显缩短了蛋白质的酶切时间,提高了酶切效率,增加了肽质量峰的数量和质量,提高了蛋白鉴定的可信度。     

改进的~(18)O同位素标记法标记蛋白质多肽

针对18O同位素标记反应两个重要影响因素——肽段分散度和胰酶灭活方法,进行了标记条件的改进和灭活方法的优化。在H218O中加入RapigestTM SF助溶剂并微波辅助加热,使α-酪蛋白胰酶酶切肽段的标记效率得到明显改进(18O/16O峰面积比值>99%)。标记后,对胰酶进行还原烷基化化学修饰彻底灭活,使标记后的肽段稳定性显著提高,放置6d不发生回交反应。对标准蛋白质甲状腺球蛋白酶切肽段混合物标记后的质谱实验结果表明:优化的标记方法能快速稳定地标记蛋白质酶切多肽。     

赖氨酸C端内切酶/胰蛋白酶顺序酶切在蛋白质组学样本制备中的评估

采用胰蛋白酶(Trypsin)单独酶切与不同酶量的赖氨酸C端内切酶(Lys-C/trypsin)顺序酶切两种方法,对293T细胞全蛋白样本进行酶解消化,系统评估Lys-C/trypsin顺序酶切与Trypsin单一酶切在蛋白质组学样本制备中的差别.实验结果表明,Lys-C/trypsin顺序酶切不仅能显著提高肽段和蛋白质的鉴定数目,同时降低遗漏K酶切位点的数目及比例,而且得到的肽段长度有利于质谱鉴定,蛋白质覆盖率明显提升.通过对酶的用量进行优化对比,最终确定了Lys-C/trypsin顺序酶切时酶的合理用量.本研究结果对提高蛋白质组学样本的制备质量以及蛋白质的序列鉴定覆盖度具有指导意义.     

基于共价色谱分离的含半胱氨酸肽段富集策略

多维色谱分离、串联质谱分析技术已在蛋白质组研究中得到广泛应用。然而生物样品的蛋白质以及全酶切肽段具有高度的复杂性,这严重干扰了蛋白质高通量、规模化的分析。通过标签肽段富集进行样品预分离可以降低体系的复杂程度。本文建立了一种基于共价色谱技术选择性分离富集含半胱氨酸肽的方法,从而降低了样品体系的复杂程度。首先以牛血清白蛋白(BSA)的酶切肽段为模型,对富集条件进行了优化和考察,并在此基础上通过5种蛋白质酶切肽段混合物的富集对该方法进行了验证。结果证明此方法的重现性好,富集效率高,富集特异性好,能有效地富集鉴定含半胱氨酸肽段。所建立的方法在复杂体系的蛋白质组研究中具有广泛的应用前景,为复杂样品的蛋白质高通量、自动化、规模化鉴定和定量研究提供了实用技术。     

基于反相有机整体柱的新型蛋白质酶反应器

以牛血清白蛋白(BSA)为标准样品,以鉴定的独立肽段数目、蛋白质鉴定覆盖率和漏切率为考察指标,通过考察酶解缓冲液、反相柱基质的多孔结构、酶解反应时间和整体柱的疏水性对反相蛋白质酶反应器酶解效率的影响,构建了一个基于反相有机整体柱的新型酶反应器,此反应器具有制备简单、通透性好、酶解时间短和蛋白质鉴定覆盖率高等特点。     

蛋白质组学研究中傅立叶变换离子回旋共振质谱数据采集方法的比较

探讨了线性离子阱-傅立叶变换离子回旋共振质谱(LTQ-FT)的数据采集模式对蛋白质组鉴定结果的影响,比较和分析了针对不同复杂程度样本的最佳采集模式.对于α-乳清蛋白4种标准蛋白质酶切肽段混合物的简单体系,在傅立叶变换离子回旋共振腔中选3个最强母离子进行选择离子监测扫描后, 再实施二级碎裂的方法(SIM3) 得到的肽段覆盖率, 分别是直接选10个最强母离子进行二级碎裂(FT10)方法得到的肽段覆盖率的1.5～1.9倍.另外, 对酵母蛋白酶切肽段混合物的复杂体系鉴定时,只采集双电荷和三电荷母离子进行二级扫描的方法(FT10_23)比单电荷、双电荷和三电荷都采集的方法(FT10_123)得到的图谱鉴定成功率提高64.1%.实验还对不同数据采集模式下图谱的特点进行了考察.本研究表明,针对不同复杂程度的样本,应采取不同的质谱数据采集方法.     

金属标记结合高效液相色谱-选择离子监测质谱的蛋白质绝对定量新方法

建立了金属标记结合高效液相色谱-选择性离子监测质谱(SIM)的蛋白质绝对定量新方法。实验考察了金属标记效率、金属标记的稳定性、标记后肽段的色谱保留和质谱行为、新定量方法的线性范围和准确度。实验结果表明金属标记具有标记效率高,稳定性好,色谱保留行为一致等优点。另外,金属标记-选择离子监测质谱绝对定量方法灵敏度高,其定量限低至1 fmol,线性范围为1~500 fmol,线性范围内R2值大于0.99,具有良好的线性关系;经过测量,标准肽段的回收率为117.01%,说明该方法具有较高的准确度。将该方法应用于腾冲嗜热菌中烯醇酶蛋白的定量分析,相对标准偏差为5.47%,表明该方法的精密度高。以上结果表明该方法可以用于生物样本中的蛋白质的绝对定量分析,为比较简单的生物样本中蛋白质的绝对定量方法提供了一种新的选择。     

反相高效液相色谱双梯度洗脱分离肽混合物及质谱分析

复杂肽段混合物的有效分离是高覆盖率地鉴定蛋白质混合物的前提。“鸟枪法”(Shotgun)蛋白质组学研究策略通常采用蛋白酶切、二维液相色谱-串联质谱分析肽段混合物从而鉴定蛋白质,其中高效率地分离肽段混合物是关键步骤之一。本文通过pH梯度结合有机溶剂梯度的反相高效液相色谱(RP-HPLC)进行一维液相色谱分离,按等时间间隔收集馏分并将一个梯度的前段的一个馏分与后段一个馏分混合,然后进行纳升级液相色谱-质谱联用(nanoRPLC-MS/MS)分析。将该方法应用于酵母蛋白质的分离和鉴定,实验结果为: 与常规的强阳离子色谱-反相液相色谱-质谱分离鉴定方法相比,采用pH梯度结合有机相梯度的RP-HPLC-RPLC-MS分离鉴定方法多鉴定到567个酵母蛋白质(簇,含有3035个唯一肽段);其中鉴定到肽段的pI分布范围为3.42～12.01,相对分子质量范围为587.67～3499.79;蛋白质的pI分布范围为3.82～12.19,相对分子质量范围为3446.55～432905。该结果表明这种方法在复杂体系蛋白质组分离鉴定中具有明显的优势,在蛋白质组学研究中有较好的应用前景。     

规模化蛋白质生物质谱鉴定中肽段氨基端环化修饰现象

对蛋白质样品制备中引入的氨基酸残基的一种现象--蛋白质酶切肽段氨基端的环化修饰现象的初步研究结果显示,很多以谷氨酰胺(Q)或氨乙酰化修饰的半胱氨酸(CAM_C)残基起始的肽段会发生氨基端的环化修饰,且修饰反应不完全,在同一样本中修饰与非修饰两种状态常同时存在,并且环化修饰后的肽段的反相色谱保留时间发生延迟.在数据库检索时添加环化修饰,可以提高蛋白质的鉴定成功率.本研究结果为大规模的蛋白质质谱数据解析提供了有价值的参考.     

Technical innovations for the automated identification of gel-separated proteins by MALDI-TOF mass spectrometry

The combination of gel-based two-dimensional protein separations with protein identification by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) is the workhorse for the large-scale analyses of proteomes. Such high-throughput proteomic approaches require automation of all post-separation steps and the in-gel digest of proteins especially is often the bottleneck in the protein identification workflow. With the objective of reaching the same high performance of manual low-throughput in-gel digest procedures, we have developed a novel stack-type digestion device and implemented it into a commercially available robotic liquid handling system. This modified system is capable of performing in-gel digest, extraction of proteolytic peptides, and subsequent sample preparation for MALDI-MS without any manual intervention, but with a performance at least identical to manual procedures as indicated on the basis of the sequence coverage obtained by peptide mass fingerprinting. For further refinement of the automated protein identification workflow, we have also developed a motor-operated matrix application device to reproducibly obtain homogenous matrix preparation of high quality. This matrix preparation was found to be suitable for the automated acquisition of both peptide mass fingerprint and fragment ion spectra from the same sample spot, a prerequisite for high confidence protein identifications on the basis of peptide mass and sequence information. Due to the implementation of the stack-type digestion device and the motor-operated matrix application device, the entire platform works in a reliable, cost-effective, and sensitive manner, yielding high confidence protein identifications even for samples in the concentration range of as low as 100 fmol protein per gel plug.      

Acid-labile surfactant improves in-sodium dodecyl sulfate polyacrylamide gel protein digestion for matrix-assisted laser desorption/ionization mass spectrometric peptide mapping

Mass spectrometry (MS) together with genome database searches serves as a powerful tool for the identification of proteins. In proteome analysis, mixtures of cellular proteins are usually separated by sodium dodecyl sulfate (SDS) polyacrylamide gel-based two-dimensional gel electrophoresis (2-DE) or one-dimensional gel electrophoresis (1-DE), and in-gel digested by a specific protease. In-gel protein digestion is one of the critical steps for sensitive protein identification by these procedures. Efficient protein digestion is required for obtaining peptide peaks necessary for protein identification by MS. This paper reports a remarkable improvement of protein digestion in SDS polyacrylamide gels using an acid-labile surfactant, sodium 3-[(2-methyl-2-undecyl-1,3-dioxolan-4-yl)methoxy]-1-propanesulfonate (ALS). Pretreatment of gel pieces containing protein spots separated by 2-DE with a small amount of ALS prior to trypsin digestion led to increases in the digested peptides eluted from the gels. Consistently, treatment of gel pieces containing silver-stained standard proteins and those separated from tissue extracts resulted in the detection of increased numbers of peptide peaks in spectra obtained by matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOFMS). Hence the present protocol with ALS provides a useful strategy for sensitive protein identification by MS.     

Optimization of in-gel protein digestion system in combination with thin-gel separation and negative staining in 96-well plate format

Improvement of in-gel digestion efficiency is highly desirable for one- or two-dimensional gel electrophoretic separation and mass spectrometric (MS) analysis in proteomics, because the resultant increases in sequence coverage and MS signal intensity lead to higher confidence in protein identification. Here an optimized in-gel digestion system, in combination with thin-gel separation and negative staining in a high-throughput format using 96-well plates, is described. The combination of negative staining and protein separation on a 0.9 mm thick gel showed a clear improvement in in-gel digestion efficiency in comparison with the more typical protocols such as the combination of silver staining and a 1.0 mm gel. In addition, the use of 96-well plates to increase throughput did not decrease the efficiency of this strategy when the stirring of the gel pieces in processes such as destaining, washing, gel-shrinking and peptide extraction was performed by sonication instead of shaking the plates. This procedure was optimized and applied to identify proteins of the postsynaptic density fraction; 105 proteins were identified after SDS-PAGE separation.     

Optimization of microfabricated nanoliter-scale solid-phase extraction device for detection of gel-separated proteins in low abundance by matrix-assisted laser desorption/ionization mass spectrometry

A nano-scale solid-phase extraction (SPE) device was developed for the detection of gel-separated proteins in low abundance by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) with a simplified microfabrication technology. By using SU-8 photoresist instead of epoxy glue to connect the microchannel and transfer capillary, polymeric contaminant signals in MS analysis were significantly reduced. Micro SPE columns with different capacities and geometric characteristics were investigated in order to increase the detection sensitivity and decrease spot size for MALDI-TOF-MS analysis. It is shown that enhancements in sensitivities for the detection of proteins in low abundance were correlated with the reduction in column capacity and increase in column aspect ratio. Fifty nanoliters of matrix solution were sufficient to elute the sample completely from the optimized micro SPE column with 3.5 nL capacity. The mass spectrum of a 5 fmol in-gel tryptic digest of bovine serum albumin (BSA), processed by the micro SPE column, demonstrated that 29 peptides matched the protein giving a sequence coverage of 51%, which was better than that obtained from analysis of 25 fmol of the same sample prepared by the dried-droplet method. With the micro SPE column treatment of 2 microL of digestion supernatant of a gel spot of the IQGAP1 protein, 15 peptides were detected from the mass spectrum with the highest individual score of 111, while, with a ZipTip procedure, only nine peaks were detected with the highest individual score of 71. Analytical results demonstrated that this approach greatly improved the sequence coverage and identification specificity for the tested protein. It can serve as a very useful tool in proteomics studies, especially for low abundance proteins.     

Profiling of Caenorhabditis elegans proteins using two-dimensional gel electrophoresis and matrix assisted laser desorption/ionization-time of flight-mass spectrometry

The nematode Caenorhabditis elegans (C. elegans) is the first animal whose whole 97 Mb genome sequence, encoding ca. 19000 open reading frames (ORF's), has been essentially determined. We tried to establish a 2-DE map of the nematode proteome by means of two-dimensional polyacrylamide gel electrophoresis (2-D PAGE). A soluble protein fraction of mixed stages of the worm, wild-type strain N2, was applied to 2-D PAGE. After Coomassie Brilliant Blue (CBB) staining, 1200 spots were detected and 140 major spots were excised from the gel and subjected to in-gel digestion with Achromobacter protease I (lysyl endopeptidase). Resulting peptides were analyzed by matrix assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS) followed by peptide mass fingerprinting for protein identification. With this approach we have obtained a two-dimensional electrophoresis (2-DE) protein map in which 69 spots were localized as landmarks for comparison of expression profiles to elucidate the basis of various biological events.     

Automated chip-based nanoelectrospray-mass spectrometry for rapid identification of proteins separated by two-dimensional gel electrophoresis

We report a method using a fully automated chip-based nanoelectrospray system for two-dimensional (2-D) gel sample analyses with mass spectrometric detection. The automated nanoelectrospray system, consisting of the NanoMate and electrospray ionization (ESI) chip, serves as both an autosampler and nanoESI source. This infusion system aspirates samples from a 96-well plate using disposable pipette tips and then delivers these samples sequentially to an ESI chip. This chip is a fully integrated monolithic device consisting of a 10x10 array of nozzles. The automated nanoelectrospray system is easily controlled through software, permitting the user to select the number of samples to be analyzed, the volume of sample to aspirate, the spray voltage, and analysis time. The system offers all the advantages of conventional nanoelectrospray plus automated, high-throughput analyses without analyte carryover. The system was used for a protein identification study of 2-D gel spots of both Escherichia coli and yeast crude cell extracts. The identification of 50 spots from E. coli crude cell extract and 27 spots from yeast extract is presented, demonstrating the powerful combination of the automated nanoESI system, the Thermo Finnigan LCQ Deca ion-trap mass spectrometer, and SEQUEST search software. In addition, the effects of silver staining and colloidal Coomassie blue staining of 2-D gel spots on the detection sensitivity and protein sequence coverage are compared and discussed. Furthermore, the comparison results using the multiwell microscale preparation kit versus manual extraction for in-gel samples are presented.     

Optimized sample-processing time and peptide recovery for the mass spectrometric analysis of protein digests

Proteomics requires an optimized level of sample-processing, including a minimal sample-processing time and an optimal peptide recovery from protein digests, in order to maximize the percentage sequence coverage and to improve the accuracy of protein identification. The conventional methods of protein characterization from one-dimensional or two-dimensional gels include the destaining of an excised gel piece, followed by an overnight in-gel enzyme digestion. The aims of this study were to determine whether: (1) stained gels can be used without any destaining for trypsin digestion and mass spectrometry (MS); (2) tryptic peptides can be recovered from a matrix-assisted laser desorption/ionization (MALDI) target plate for a subsequent analysis with liquid chromatography (LC) coupled to an electrospray ionization (ESI) quadrupole ion trap MS; and (3) an overnight in-gel digestion is necessary for protein characterization with MS. These three strategies would significantly improve sample throughput. Cerebrospinal fluid (CSF) was the model biological fluid used to develop these methods. CSF was desalted by gel filtration, and CSF proteins were separated by two-dimensional gel electrophoresis (2DGE). Proteins were visualized with either silver, Coomassie, or Stains-All (counterstained with silver). None of the gels was destained. Protein spots were in-gel trypsin digested, the tryptic peptides were purified with ZipTip, and the peptides were analyzed with MALDI and ESI MS. Some of the samples that were spotted onto a wax-coated MALDI target plate were recovered and analyzed with ESI MS. All three types of stained gels were compatible with MALDI and ESI MS without any destaining. In-gel trypsin digestion can be performed in only 10-60 min for protein characterization with MS, the sample can be recovered from the MALDI target plate for use in ESI MS, and there was a 90% reduction in sample-processing time from overnight to ca. 3 h.     

Miniaturized on-line proteolysis-capillary liquid chromatography-mass spectrometry for peptide mapping of lactate dehydrogenase

In this study, methodology was developed for on-line and miniaturized enzymatic digestion with liquid chromatographic (LC) separation and mass spectrometric (MS) detection. A packed capillary LC-MS system was combined with on-line trypsin cleavage of a model protein, lactate dehydrogenase, to provide an efficient system for peptide mapping. The protein was injected onto an enzymatic capillary reactor and the resulting peptides were efficiently trapped on a capillary trapping column. Different trapping columns were evaluated to achieve a high binding capacity for the peptides generated in the enzyme reactor. The peptides were further eluted from the pre-column and separated on an analytical capillary column by a buffer more suitable for the following an electrospray ionisation (ESI) MS process. An important aspect of the on-line approach was the desalting of peptides performed in the trapping column to avoid detrimental signal suppression in the ESI process. The developed on-line system was finally compared to a classical digestion in solution, with reference to peptide sequence coverage and sensitivity. It was shown that the on-line system gave more than 100% higher peptide sequence coverage than traditional digestion methods.     

Tandem mass spectrometry methods for definitive protein identification in proteomics research

Optimized procedures have been developed for the addition of sulfonic acid groups to the N-termini of low-level peptides. These procedures have been applied to peptides produced by tryptic digestion of proteins that have been separated by two-dimensional (2-D) gel electrophoresis. The derivatized peptides were sequenced using matrix-assisted laser desorption/ionization (MALDI) post-source decay (PSD) and electrospray ionization-tandem mass spectrometry methods. Reliable PSD sequencing results have been obtained starting with sub-picomole quantities of protein. We estimate that the current PSD sequencing limit is about 300 fmol of protein in the gel. The PSD mass spectra of the derivatized peptides usually allow much more specific protein sequence database searches than those obtained without derivatization. We also report initial automated electrospray ionization-tandem mass spectrometry sequencing of these novel peptide derivatives. Both types of tandem mass spectra provide predictable fragmentation patterns for arginine-terminated peptides. The spectra are easily interpreted de novo, and they facilitate error-tolerant identification of proteins whose sequences have been entered into databases.