主链含冠醚的聚对亚苯基亚乙烯基类发光共聚物的合成与性能研究

将冠醚引入到聚合物骨架上合成了一种聚合物分子主链上同时带有离子传导与电子传导链段的聚对亚苯基亚乙烯基功能性发光共聚物DB PV ,采用FT IR、1 H NMR、DSC、元素分析等手段对共聚物进行了表征 ,测定了共聚物的氯仿溶液和其膜的紫外吸收及其光致发光行为 .结果表明DB PV可溶于氯仿、吡啶等有机溶剂 ,具有良好的溶解成膜性与加工性能 ,是一种较理想的功能性蓝色发光材料     

含亚甲基链段苯并二(口恶)唑类聚合物的合成、表征及性能

通过溶液缩聚的方法合成了一系列含有不同长度亚甲基链段的聚苯并羟基酰胺(PHACx),然后在200～300 ℃下环化脱水制备了相应的聚多亚甲基苯并二唑(PBOCx),并对其结构进行了表征,探讨了聚合物的溶解性、热性能和光物理性能.研究表明:在主链上引入亚甲基提高了苯并二唑类聚合物在有机溶剂中的溶解性,其中PBOC3 和PBOC4具有较好的溶解性能,但随着亚甲基数量的进一步增加,溶解性有下降趋势.此外,所有的PBOCx聚合物均表现出良好的耐热性,在空气中的热分解温度可达到450 ℃以上.对聚合物光物理性能的初步研究表明:随着柔性链段的增加,电子共轭作用逐渐减弱,紫外吸收发生了蓝移.     

侧链接枝低聚对亚苯基亚乙烯基聚芴衍生物的合成及其电致发光性能

采用Wittig-Horner反应,将少量端基为磷脂的黄光发射客体低聚对亚苯基亚乙烯基链段(MOPV)接枝到含有醛基单体的蓝光发射主体材料聚芴的侧链上,合成了一种新型的接枝聚芴衍生物PF-g-MOPV.这种接枝聚合物具有很好的热稳定性,可溶于常用的有机溶剂.以接枝共聚物PF-g-MOPV为发光层的单层器件发射出黄绿光,色坐标为(0.30,0.57),最大发光亮度达到1550cm/m2,这说明蓝光聚芴主链向侧链MOPV进行了有效地能量转移.     

呼吸图法制备聚亚甲基-b-聚甲基丙烯酸甲酯多孔薄膜

首先利用叶立德活性聚合和原子转移活性自由基聚合(ATRP)相结合制备了三个不同链段比的聚亚甲基-b-聚甲基丙烯酸甲酯(PM-b-PMMA)两嵌段聚合物. 接着以它们为原料, 利用静态呼吸图方法在四种不同溶剂中制备了一系列的具有蜂窝状表面的多孔薄膜, 用扫描电子显微镜(SEM)观察了多孔薄膜的形貌. 研究了溶剂、溶液浓度、聚合物链段长度及链段比等因素对多孔薄膜表面孔的大小和分布的影响. 结果表明: 当PM_2k-b-PMMA_2k嵌段聚合物浓度为3 wt%、溶剂为二硫化碳(CS₂)和二氯甲烷(CH₂Cl₂)时, 可以通过静态呼吸图方法制备出孔径为纳米级(520 nm)和微米级(1.1 μm)的较为规整的多孔薄膜. 多孔薄膜表面的孔径随PM-b-PMMA浓度的减小而增大|两嵌段聚合物中两个链段的长度及其链段比的变化对多孔膜表面孔径均产生较大的影响.     

含噁二唑的聚(间亚苯乙烯)电致发光二极管

1990年英国剑桥大学的Burroughes等人[1]以聚(对亚苯乙烯)为发光材料制备了第一个有机聚合物电致发光二极管,该工作引起了科学工作者的极大兴趣.聚合物材料具有很好的电、热稳定性以及机械加工和成膜性能,发光亮度和效率较高,通过化学修饰可获得三原色发光.而且聚合物电致发光二极管的工作电压较低,可实现大面积平板显示和集成化.     

含亚甲基链段苯并二嗯唑类聚合物的合成、表征及性能

通过溶液缩聚的方法合成了一系列含有不同长度亚甲基链段的聚苯并羟基酰胺（PHACx），然后在200～300℃下环化脱水制备了相应的聚多亚甲基苯并二嘿唑（PBOCx），并对其结构进行了表征，探讨了聚合物的溶解性、热性能和光物理性能。研究表明：在主链上引入亚甲基提高了苯并二嘿唑类聚合物在有机溶剂中的溶解性，其中PBOC3和PBOC4具有较好的溶解性能，但随着亚甲基数量的进一步增加，溶解性有下降趋势。此外，所有的PBOCx聚合物均表现出良好的耐热性，在空气中的热分解温度可达到450℃以上。对聚合物光物理性能的初步研究表明：随着柔性链段的增加，电子共轭作用逐渐减弱，紫外吸收发生了蓝移。     

共轭/非共轭嵌段聚苯撑乙烯(PPV)类共聚物的合成与性能

用活性中间体直接引发共轭/非共轭单体聚合的新方法合成了3种PPV嵌段共聚物;用核磁共振谱和FTIR光谱确定了共聚物的结构.引入非共轭片段PS缩短了PPV共轭链的长度,改善了聚合物的溶解性和可加工性.荧光光谱结果表明,嵌段聚合物可使发射峰蓝移,发光的量子效率明显提高,进而调节了发光颜色.     

软硬段交替型蓝绿色发光共聚物及其电致发光性能研究

合成了一种分子主链由发光链段－1，5－二（3，5－二甲氧基苯乙烯基）萘与柔性隔离链段－三缩二乙二醇组成的交替型蓝绿色发光聚合物（TEO－VN）。该聚合物能溶于氯仿、甲苯、二氯甲烷等有机溶剂中，旋涂制成的薄膜高度透明、均匀、无针孔。其Tg为42℃。TEO－VN具有优异的耐热稳定性，在氮气中的最低分解温度高达409℃。对其发光性能的研究表明，TEO－VN是一种典型的蓝绿色发光聚合物，其最大发射峰处于499nm。以TEO－VN装配的发光二极管（LED）的起亮电压为5V，在正向偏压为20V时，最大发光亮度为275cd/m^2。     

一类基于苝酰亚胺和亚苯基亚乙炔基交替共轭聚合物的合成与表征

以1,7"bay"位置溴化苝酰亚胺为电子受体、低聚亚苯基亚乙炔基(OPE)为电子给体,通过Sonagashira反应制备了一系列不同OPE含量的具有p-n结构主链全共轭交替聚合物,并对其光物理和电化学性质进行了表征.紫外-可见吸收光谱表明,聚合物具有较宽的光吸收范围(350~900 nm),有利于提高体系的光吸收效率;荧光光谱实验发现,对苝酰亚胺单元进行选择性激发,产生由分子内电荷分离所导致的荧光猝灭现象,为该材料应用于光伏器件提供了理论和实验依据.     

侧链含氨基的聚(对亚苯基亚乙炔基-对亚苯基-咔唑)三元共聚物的合成及其聚集态下荧光特性

通过Sonogashira偶联反应制备了含有4-[2-(对苯胺)乙烯基]苯(M1)、2,5-二戊烷氧基-1,4-二乙炔基苯(M2)和9-辛基咔唑(M3)3种结构单元的三元共轭聚合物PPEC,并通过核磁共振氢谱确定了3种结构单元的比例为0.54∶1.00∶0.46(M1∶M2∶M3).由于在PPEC的侧链中含有氨基基团,通过在PPEC的THF溶液中分别加入水、甲醇和正己烷,诱导其产生聚集,其聚集后的荧光性质表现出明显的不同,在THF与水的混合溶剂中,PPEC发光强度会随着水含量的增加先是急剧降低,而后在高水含量时发光强度又显著增强;在THF与甲醇的混合溶剂中,PPEC发光强度随着甲醇的加入只是逐渐降低;在THF与正己烷的混合溶剂中,PPEC的发光强度则会随着正己烷的增加而增强.该结果表明氨基通过与水,或者自身所形成氢键作用,改变了PPEC分子链之间的聚集态结构,降低了分子内旋转非辐射能量效率,从而有效改善共轭聚合物的主链发光性质,这为设计聚集态下(或固态下)高性能的荧光共轭聚合物提供了一种新思路.     

新型红光电磷光芴-alt-咔唑共聚物的合成与发光性能

通过Suzuki聚合反应合成了一系列以芴-alt-咔唑为主链, 铱配合物为侧链的深红色电磷光共轭聚合物. 发光器件结构为ITO/PEDOT∶PSS/PVK/Copolymer/Ba/Al, 基于共聚物PFCzIrNiq-1的器件在电流密度为9.4 mA/cm2时, 最大外量子效率为0.23%, 最大发射波长为680 nm.     

一种星型有机低聚物的合成及光电性能

通过多步反应合成了一种新型的具有“双极(bipolar)”性质和发光性能的以N原子为中心的星型有机小分子低聚物——三(4-(5-(4-(5-(4-(二苯胺基)苯基)-1,3,4-噁二唑-2)苯基)-1,3,4-噁二唑-2)苯基)胺. 用¹H NMR, MS和元素分析进行了表征, 研究了化合物的热稳定性和固体粉末的光致发光性质, 并用循环伏安法测定了其电化学性能. 结果表明, 这种合成的同时具备空穴传导和电子输入双重功能基团的星型有机小分子光致发光性能优良(量子效率92%), 热稳定性好, 可以作为制作有机电致发光器件的候选材料.     

胺基功能化咔唑共轭聚合物的合成及其光电性能研究

发展了新型含有胺基的支化烷基修饰的咔唑单元,并且与芴、咔唑、苯等单元通过Suzuki偶联反应共聚得到不同主链结构的水/醇溶共轭聚合物界面修饰材料,研究了主链结构的变化对材料光物理、电化学性能的影响.所有聚合物均被用作阴极界面材料应用于器件结构为ITO/PEDOT：PSS/P-PPV/界面层/Al的聚合物发光二极管中.在相同器件制备条件下,系统比较了不同主链结构的界面修饰材料在器件中的性能,并研究了性能差异的原因.器件研究结果表明,在高功函数金属Al阴极的聚合物发光二极管中,含胺基功能化咔唑单元的水/醇溶共轭聚合物材料由于界面偶极的形成,均表现出很好的电子注入/传输性能,与之对应的器件性能得到大幅提升.     

Synthesis and optoelectronic properties of amino-functionalized carbazole-based conjugated polymers

A series of alcohol soluble amino-functionalized carbazole-based copolymers were synthesized via Suzuki coupling reaction.The pendent amino groups endow them high solubility in polar solvents,as well as efficient electron injection capability from high work-function metals.The relationships between the photophysical and electrochemical properties and the polymer backbone structure were systematically investigated.These alcohol-soluble carbazole-based copolymers were used as cathode interlayers between the high work-function metal Al cathode and P-PPV emissive layer in polymer light-emitting diodes with device structure of ITO/PEDOT:PSS/P-PPV/interlayer/Al.The resulting devices exhibited improved performance due to the better electron injection/transporting ability of the designed copolymers from Al cathode to the light-emitting layer.     

Phenylquinoxaline–Aryl ester block copolymers

Phenylquinoxaline–aryl ester block copolymers were synthesized using well-defined phenolic hydroxyl terminated oligomers via a monomers/oligomer approach. Phenylquinoxaline oligomers with molecular weights of 5600 and 12,900 g/mol were prepared from the condensation of 1,4-bis(phenylglyoxalyl)benzene and 3,3′-diaminobenzidine in the presence of 4-hydroxylbenzil. The oligomers were copolymerized with isophthaloyl chloride and bisphenol A in tetrachloroethane to afford the desired phenylquinoxaline–aryl ester block copolymers. Copolymers with polyester compositions ranging from 15–50 wt % were prepared by controlling the monomers/oligomer stoichiometry. The majority of the materials displayed single phase morphologies with T_gs intermediate to the T_gs for the poly (phenylquinoxaline) and polyester homopolymers. Plots of the reciprocal of the T_g of the copolymers versus composition agreed well with values predicted by the Fox equation. A multiphase morphology was obtained for the copolymer with the highest polyester block length (? 13,000 g/mol), which displayed a T_g at 190 and 300°C indicative of a glassy–glassy system. Significant improvement in the elongations were observed for the copolymers relative to the poly(phenylquinoxaline) homopolymer. The improved elongations were obtained with minimal sacrifice to the modulus. These materials represent the first example of poly(phenylquinoxaline) block copolymers from well-defined phenylquinoxaline oligomers.     

烷基芴与三苯胺取代-3,6-芴共聚物的合成及其性能

用Suzuki偶联反应制备了一系列新型的9,9-二辛基-2,7-芴(DOF)与9,9-二(4-二苯胺基苯基)-3,6-芴(36FT)的共聚物. 所有的聚合物均可溶于常见的有机溶剂(如THF, CHCl3和甲苯等), 分子量在47000~189000之间. 电化学研究结果表明, 所有聚合物的HOMO能级都高于均聚烷基芴, 并且随着36FT含量的增加, HOMO值逐渐上升. 以该类聚合物为发光层制作了结构为ITO/PEDOT/PVK/polymer/Ba/Al的器件, 获得了稳定的蓝光发射, 其中以36PFT10为发光层的器件获得了0.52%的最大外量子效率.     

Graft copolymers having hydrophobic backbone and hydrophilic branches. III. Synthesis of graft copolymers having oligovinylpyrrolidone as hydrophilic branch

Graft copolymers were synthesized by the esterification reaction between acrylic copolymers and carboxyl group terminated vinylpyrrolidone oligomer using phase transfer catalysts. Acrylic copolymers were obtained by the radical copolymerization of β-bromoethyl methacrylate, chloromethylstyrene or glycidyl methacrylate with methyl methacrylate. Hydrophilic oligomers were prepared by the radical oligomerization of vinylpyrrolidone using β-mercaptopropionic acid as chain transfer agent. The degree of esterification increased with decreasing the molecular weight of oligomer and with increasing the number of potential grafting sites on polymer backbones. The water dispersibility of graft copolymers increased with increasing the nitrogen content and was therefore dependent on the branch oligomer content.     

Controlled grafting of acetylated starch by atom transfer radical polymerization of MMA

Graft copolymers of acetylated starch oligomer (AS) and poly(methyl methacrylate) (PMMA) were polymerized by atom transfer radical polymerization (ATRP). AS was converted to an ATRP macroinitiator by converting a part of the hydroxyl groups of AS to 2-bromoisobutyryl groups. Macroinitiators with varying degrees of substitution for the 2-bromoisobutyryl group were prepared. The polymerizations were conducted using CuBr/BiPy catalyst system, either in bulk or in 1:1 v/v THF solution. They proceeded with first-order kinetics and the molecular weights of the polymers increased linearly with conversion. Graft copolymers with different graft densities and graft lengths were prepared in a controlled manner. The hydrophobicity of these copolymers was studied by contact angle measurements.     

Polyfluorenes containing pyrazine units:Synthesis,photophysics and electroluminescence

A series of conjugated copolymers of 9,9-dioctylfluorene and symmetrical pyrazine unit (BY) were synthesized by Suzuki copolymerization and were used as novel light-emitting materials in PLEDs.Efficient energy transfer was observed in both thin film and solution.Compared with the lowest occupied molecular orbital (LUMO) energy level of the polyfluorenes homopolymer (PFO),the lower LUMO energy levels of copolymers indicated that the introduction of the BY unit would be benefit to electron injection.The turn-...     

Synthesis, characterization and photophysics of fluorene-alt-oxadiazole copolymers containing pendent iridium (III) complex moiety

A series of fluorene-alt-oxadiazole copolymers containing a pendent phosphor chromophore of the (piq)₂Ir(pic) complex were synthesized via the palladium-catalyzed Suzuki coupling reaction, where piq is 1-phenylisoquinoline and pic is picolinic acid. These copolymers exhibited a similar absorption spectrum with a peak at about 330 nm and a typical emission peak at 408 nm in CH₂Cl₂ from the fluorene-alt-oxadiazole backbone. However, a significantly red-shifted emission peak at about 625 nm was observed in the neat films of these copolymers, which are attributed to the pendent iridium (III) complex unit. Using these copolymers as single emission layer, the polymer light-emitting devices with a configuration of ITO/PEDOT:PSS/copolymers/LiF/Al exhibited a saturated red emission with a peak at 632 nm. Significant influence of the attached iridium (III) complex ratio on EL performance was presented. A maximum current efficiency of 1.2 cd/A at 63 mA/cm² and a maximum luminance of 1125 cd/m² at 12 V were achieved from the device with the copolymer containing iridium (III) complex in a 3% molar ratio.