排序方式: 共有43条查询结果,搜索用时 284 毫秒
1.
基于内聚力理论、氢压理论和应力作用下氢富集理论,在以往孔洞锻合研究的基础上,建立了白点萌生扩展的有限元分析模型。研究了初始氢浓度、裂纹长度以及多裂纹耦合作用等多种因素对白点萌生的影响,确定了不同条件下白点萌生的临界氢浓度及其变化趋势。结果表明,氢对白点萌生具有重要的影响,在白点萌生过程中,高浓度的氢聚集在裂纹端部,极大地降低了钢的内聚力强度;对于单裂纹,随着裂纹长度的增加,白点萌生的临界氢浓度逐渐减小并趋于稳定值;当多个密集小裂纹同时存在时,裂纹间的耦合效应会导致小裂纹有贯穿形成大裂纹的趋势,而远端裂纹的耦合效应则相对较小;对于多裂纹,白点萌生临界氢浓度具有随裂纹个数的增加而线性递减的趋势。 相似文献
2.
首先制备了硅烷偶联剂改性后的石墨烯和钛酸锶钡粉体,然后采用溶液混合法制备了石墨烯/钛酸锶钡/聚偏氟乙烯薄膜,并且对复合薄膜的微观结构、介电性能和热稳定性进行测定和分析。结果表明:硅烷偶联剂成功接枝到石墨烯和钛酸锶钡粉体表面,石墨烯和钛酸锶钡粉体能够较好的分散在聚偏氟乙烯基体中,石墨烯的加入可以大幅度提高材料的介电性能。在石墨烯质量分数为4.06%时,复合薄膜的介电常数达到515,介电损耗为0.6。在质量分数4.14%时发生了渗流现象,介电常数达到1500,介电损耗也达到了5左右。石墨烯的加入大幅度提升了复合材料的介电性能,并且在常用温度范围内具有良好的温度稳定性。 相似文献
3.
4.
以烟草花叶病毒(TMV)为基本构建单元,研究了其在毛细管、载玻片-载玻片和柱透镜-硅片3种不同受限空间下的自组装行为。 结果表明,由于接触线有规律、重复性的粘滑运动,在3种受限体系下TMV均可组装得到高度规整的条带结构。 在毛细管内组装可得到垂直于管的长轴方向的有序条带。 随接触线深入管中心,条带跨距(l)与带宽(w)均逐渐增大。 在2个平行载玻片所构成的可控空间内所得到的条带以2条互相垂直的中心线为轴对称排列,并沿从载玻片边缘至轴向中心方向条带跨距和带宽梯度增大。 同样,利用柱透镜 硅片所组成的体系可得到类似平行线状条带,其跨距、带宽及条带高度沿从外部边缘至柱透镜/硅片接触中心方向逐渐减小。 在3种体系下,棒状TMV粒子均平行于接触线的方向取向。 TMV浓度对组装结构具有显著影响,随着浓度的增加,条带跨距和带宽均增加,直至条带结构消失形成连续膜。 相似文献
5.
用熔融急冷法制备了系列不同Er3+离子掺杂浓度的Ge-Ga-S-KBr硫卤玻璃,测试了样品折射率、吸收光谱、中红外荧光光谱。通过吸收光谱计算了Er3+离子吸收谱线的振子强度,应用Judd-Ofelt理论计算分析了Er3+离子在Ge-Ga-S-KBr硫卤玻璃中的强度参数Ωi ( i = 2 , 4 , 6) 、自发辐射跃迁几率A、荧光分支比?和辐射寿命?rad等光谱参数。研究了808nm激光泵浦下样品中红外荧光特性与掺杂浓度之间变化关系,并用Futchbauer-Ladenburg公式分别计算了2.8?m处的受激发射截面。结果表明,在808nm 激光泵浦下观察到了2.8?m中红外荧光,分别对应于Er3+: 4I11/2?4I13/2跃迁,当Er3+离子掺杂浓度从0.4wt%增加到1.0wt%时,中红外荧光强度都随相应增加,计算的Er3+:4I11/2?4I13/2跃迁多声子驰豫速率分别为37 s-1。 相似文献
6.
Spectroscopic properties of Yb~(3+)-doped TeO_2–BaO–BaF_2–Nb_2O_5-based oxyfluoride tellurite glasses 下载免费PDF全文
A series of oxyfluoride glasses with the compositions of 75 mol% TeO2, 10 mol% Nb2O5,(15 mol%-x) BaO, x BaF2(x = 0 mol%, 5 mol%, 10 mol%, 15 mol%) doped with Yb2O3 were prepared by the melt-quenching method. Their emission cross-sections, fluorescence lifetimes, and gain properties were investigated by using the absorption spectra and the fluorescence decay curves. The results show that by substituting BaF2 for BaO, the emission cross-section decreases from 1.37 pm2 to 1.21 pm2, and the fluorescence lifetime increases from 0.71 ms to 0.96 ms. These properties indicate that this oxyfluoride tellurite glass may have potential uses as the Yb2O3-doped gain medium in a solid laser. 相似文献
7.
8.
IntroductionTriazenereagentsareinterestingbecauseoftheirstrongcomplexationabilitieswithtransitionmetals .1 6However,littledecolorationofthemcatalyzedbysilverionhasbeenstudiedinanalyticalchemistry .Manyanal ysistshavereportedtheuseofcatalyticreactionsfort… 相似文献
9.
10.
Optical planar waveguides in Yb<sup>3+</sup>-doped phosphate glasses produced by He<sup>+</sup> ion implantation 下载免费PDF全文
Optical planar waveguides in Yb 3+-doped phosphate glasses are fabricated by implanting triple-energy helium ions. The guiding modes and the near-field intensity distribution are measured by using the prism-coupling method and the end-face coupling setup with a He-Ne laser at 633 nm The intensity calculation method (ICM) is used to reconstruct the refractive index profile of the waveguide. The absorption and the fluorescence investigations reveal that the glass bulk features are well preserved in the active volumes of the waveguides, suggesting the fabricated structures for possible applications as waveguide lasers. 相似文献