DFT Studies on Thermal Stabilities,Electronic Structures,and ~（13）C Chemical Shifts of C_（24）O_2 Based on Fullerene C_（24）（D_6）

Quantum chemical calculations on some possible equilibrium geometries of C24O2 isomers derived from C24 (D6) and C24O have been performed using density functional theory (DFT) method. The geometric and electronic structures as well as the relative energies and thermal stabilities of various C24O2 isomers at the ground state have been calculated at the B3LYP/6-31G(d) level of theory. And the 1,4,2,5-C24O2 isomer was found to be the most stable geometry where two oxygen atoms were added to the longest carbon-carbon bonds in the same pentagon from a thermodynamic point of view. Based on the optimized neutral geometries, the vertical ionization potential and vertical electron affinity have been obtained. Meanwhile, the vibrational frequencies, IR spectrum, and 13C chemical shifts of various C24O2 isomers have been calculated and analyzed.     

Theoretical Studies on Stabilities and Spectroscopy of C78O5

The semi-empirical AM1 and INDO/CIS methods as well as density function theory were used to study equilibrium geometries and spectroscopic properties of the possible isomers of C78O5 based on C2v-C78. The most stable geometry of C78O5 is 28,29,30,31,52,53,70,71,73,78-C78O5(A) with one annulene-like structure and four epoxide structures. Compared with that of C2v-C78, the blue-shift in the electronic absorption spectra of C78O5 isomers is predicted. The reason for the blue-shift effect is discussed and the electronic transitions are assigned. The IR and NMR spectra of C78O5 are explored with the AM1 and B3LYP/6-31G methods based on the B3LYP/6-31G optimized geometries.     

Photoelectron spectroscopy and electronic structures of fullerene oxides: C60Ox- (x = 1-3)

We report a photoelectron spectroscopy (PES) study on a series of fullerene oxides, C60Ox- (x = 1-3). The PES spectra reveal one isomer for C60O-, two isomers for C60O2, and multiple isomers for C60O3-. Compared to C60, the electronic structures of C60Ox are only slightly perturbed, resulting in similar anion photoelectron spectra. The electron affinity of C60Ox was observed to increase only marginally with the number of oxygen atoms, x, from 2.683 eV for C60, to 2.745 eV for C60O, and 2.785 eV/2.820 eV for C60O2 (two isomers). We also carried out theoretical calculations, which confirmed the observed isomers and showed that all the fullerene oxides are in the form of epoxide. The PES and theoretical calculations, as well as molecular orbital analysis, indicate that addition of oxygen atoms to the C60 cage only modifies the local carbon network and leave the rest of the fullerene cage largely intact geometrically and electronically.     

脯氨酸的构象及性质

用X3LYP法在6-311++G(d, p)和6-311++G(3df, 3pd)基组水平上对脯氨酸15种构象的几何结构、相对能量、电子结构、红外光谱、偶极矩、极化率等性质进行了研究, 并与PBE1PBE/6-311++G(d, p)的结果和文献相比较, 从而得到: (1) 的脯氨酸的15种构象中能量最低的有4种, 不同构象中存在着强弱不同的5种氢键, 其中以N…H—O氢键最强, 并存在特殊的C—H…O=C氢键. 两种方法计算的几何结构数据相近, 均与实验值吻合; (2) 在构象相对能差计算方面, X3LYP具有明显的优势, 用中等基组就可以得到与高水平从头算法和大基组相同的结果, 而PBE1PBE法计算的相对能值则相差较大; (3) 脯氨酸不同构象中偶极矩最大和极化率最小的是最稳定的构象1和2, 两种方法计算的结果一致.     

Thermally stable perfluoroalkylfullerenes with the skew-pentagonal-pyramid pattern: C60(C2F5)4O, C60(CF3)4O, and C60(CF3)6

Reaction of C(60) with CF(3)I at 550 degrees C, which is known to produce a single isomer of C(60)(CF(3))(2,4,6) and multiple isomers of C(60)(CF(3))(8,10), has now been found to produce an isomer of C(60)(CF(3))(6) with the C(s)-C(60)X(6) skew-pentagonal-pyramid (SPP) addition pattern and an epoxide with the C(s)-C(60)X(4)O variation of the SPP addition pattern, C(s)-C(60)(CF(3))(4)O. The structurally similar epoxide C(s)-C(60)(C(2)F(5))(4)O is one of the products of the reaction of C(60) with C(2)F(5)I at 430 degrees C. The three compounds have been characterized by mass spectrometry, DFT quantum chemical calculations, Raman, visible, and (19)F NMR spectroscopy, and, in the case of the two epoxides, single-crystal X-ray diffraction. The compound C(s)-C(60)(CF(3))(6) is the first [60]fullerene derivative with adjacent R(f) groups that are sufficiently sterically hindered to cause the (DFT-predicted) lengthening of the cage (CF(3))C-C(CF(3)) bond to 1.60 A as well as to give rise to a rare, non-fast-exchange-limit (19)F NMR spectrum at 20 degrees C. The compounds C(s)-C(60)(CF(3))(4)O and C(s)-C(60)(C(2)F(5))(4)O are the first poly(perfluoroalkyl)fullerene derivatives with a non-fluorine-containing exohedral substituent and the first fullerene epoxides known to be stable at elevated temperatures. All three compounds demonstrate that the SPP addition pattern is at least kinetically stable, if not thermodynamically stable, at temperatures exceeding 400 degrees C. The high-temperature synthesis of the two epoxides also indicates that perfluoroalkyl substituents can enhance the thermal stability of fullerene derivatives with other substituents.     

IR spectra of photopolymerized C60 films. Experimental and density functional theory study

IR spectra of photopolymerized fullerene films obtained by simultaneous deposition and UV irradiation were measured in the range of 1500-450 cm(-1). The degree of the polymerization of the C60 films was estimated to be about 95%. To assist the assignment of the experimental IR spectra of the films, quantum chemical calculations of the equilibrium structures of the C60 dimers and trimers were performed at the DFT(B3LYP)/3-21G level of theory. Next, IR frequencies and intensities for those structures were calculated. For the five-trimer structures found in the calculations, the relative stabilities were determined at the B3LYP/4-31G and B3LYP/6-31G levels and used to select the lowest-energy trimers, which are Trimer A (angle between monomer centers is 90 degrees ) and Trimer B (angle between monomer centers is 120 degrees). Next, the IR spectra of the polymerized fullerene films were compared with the calculated frequencies of the lowest-energy dimer and the two lowest-energy trimers. On the basis of this analysis and on the comparison of the film spectra with the IR spectra of the C60 dimer and trimer spectra obtained by other methods, it was shown that the main components of the films are C60 dimers and the orthorhombic (O) polymer phase. The tetragonal (T) and rhombohedral (R) polymers, as well as small amounts of monomers, were also found. Although vibrational frequencies of different C60 phases are similar in most cases, we found several unique spectral features of the C60 dimer and other polymers that may be used to determine the composition of the polymerized C60 film.     

The tautomeric forms of cyameluric acid derivatives

The tautomerism of cyameluric acid C6N7O3H3 (1 a), cyamelurates and other heptazine derivatives has recently been studied by several theoretical investigations. In this experimental study we prepared stannyl and silyl derivatives of cyameluric acid (1 a): C6N7O3[Sn(C4H9)3]3 (3 a), C6N7O3[Sn(C2H5)3]3 (3 b), and C6N7O3[Si(CH3)3]3 (4). In order to investigate the structure of 1 a the mono- and dipotassium cyamelurate hydrates K(C6N7O3H2)2 H2O (5) and K2(C6N7O3H)1 H2O (6) were synthesized by UV/Vis-controlled titration of a potassium cyamelurate solution with aqueous hydrochloric acid. Compounds 3-6 were characterized by FTIR and solid-state NMR spectroscopy as well as simultaneous thermal analysis (TGA, DTA). The single crystal X-ray structures of the salts 5 and 6 show that the hydrogen atoms in both anions are localized on the peripheral nitrogen atoms. This indicates-in combination with the solid-state NMR studies-that the most stable tautomer of solid 1 a is the triketo form with C3h symmetry. However, derivatives of both the hydroxyl and the amido tautomers may be formed depending on the substituent atoms: The spectroscopic data and single crystal structures of compounds C6N7O3[Si(CH3)3]3 (4) and the solvate C6N7O3[Sn(C2H5)3]3C2H4Cl2 (3 b') show that the former is derived from the symmetric trihydroxy form of 1 a, while 3 b' crystallizes as a chain-like polymer, which contains the tin atoms as multifunctional building blocks, that is, bridging pentacoordinated Et3SnO2 and Et3SnON units as well as non-bridging four-coordinated Et3SnN units. The cyameluric nucleus is part of the polymeric chains of C6N7O3[Sn(C2H5)3]3C2H4Cl2 (3 b'), by the action of both tautomeric forms of cyameluric acid, the amide and the ester form.     

Selective preparation of oxygen-rich [60]fullerene derivatives by stepwise addition of tert-butylperoxy radical and further functionalization of the fullerene mixed peroxides

tert-Butylperoxy radicals add to C(60) selectively to form multi-adducts C(60)(O)(m)(OO(t)Bu)(n) (m = 0, n = 2, 4, 6; m = 1, n = 0, 2, 4, 6) in moderate yields under various conditions. Visible light irradiation favors epoxide formation. High concentration of tert-butylperoxy radicals mainly produces the hexa-homoadduct C(60)(OO(t)Bu)(6) 6; low concentration and long reaction time favor the epoxy-containing C(60)(O)(OO(t)Bu)(4) 7. The reaction can be stopped at the bis-adducts with limited TBHP. A stepwise addition mechanism is discussed involving mono-, allyl-, and cyclopentadienyl C(60) radical intermediates. m-CPBA reacts with the 1,4-bis-adduct to form C(60)(O)(OO(t)Bu)(2) and C(60)(O)(3)(OO(t)Bu)(2). The C-O bond of the epoxy ring in 7 can be cleaved with HNO(3) and CF(3)COOH. Nucleophilic addition of NaOMe to 7 follows the S(N)1 and extended S(N)2' mechanism, from which four products are isolated with the general formula C(60)(O)(a)(OH)(b)(OMe)(c)(OO(t)Bu)(d). Visible light irradiation of the hexa-adduct 6 results in partial cleavage of both the C-O and O-O bonds of peroxide moieties and formation of the cage-opened compound C(60)(O)(O)(2)(OO(t)Bu)(4). All the fullerene derivatives are characterized by spectroscopic data. A single-crystal structure has been obtained for an isomer of C(60)(O)(OH)(2)(OMe)(4)(OO(t)Bu)(2).     

Quantum chemical study of the reaction of trichloroethylene with O(3P)

The adiabatic mechanism of the reaction of trichloroethylene with O(³P), exploring the various O-atom addition and H-atom abstraction channels, is theoretically studied at the MP2/6-311++G(2d, 2p), MP2/aug-cc-pVTZ, CCSD/6-31G(d), G3, and CBS-QB3 levels of theory. From a kinetic point of view, the addition to the less substituted carbon atom of the double bond is more favorable than the addition to the more substituted carbon. Such O-atom addition reactions are favored over the one possible hydrogen-abstraction reaction. Calculations of the present study showed that five products are obtained: HCCl + C(O)Cl₂ (P1), Cl + ClC(O)CHCl (P2), H + ClC(O)CCl₂ (P3), Cl + HC(O)CCl₂ (P4), and CH(O)Cl + CCl₂ (P5). The products P2 and P4 are found to be the most favored ones. The kinetic calculations of rate constant in the range of 285–395 K are performed at the CBS-QB3 level of theory and are in conformity with the experimental outcomes.     

C60O结构和电子光谱的理论研究

用ＩＮＤＯ系列方法研究Ｃ６０Ｏ的两种结构：一是桥氧加在２个六元环之间的键上为Ｃ２ｖ构型；另一个是桥氧加在１个五元环和１个六元环之间的键上为Ｃｓ构型。计算表明，从总能量、ＨＯＭＯ－ＬＵＭＯ能级差和光谱性质看，Ｃ６０Ｏ的稳定构型都应是Ｃ２ｖ构型，该Ｃ２ｖ异构体具有环氧结构（桥Ｃ１５－Ｃ３０键长为０．１５１８ｎｍ，键序为０．８７４４），其电子光谱计算结果与实验值较好地符合。     

Comparison of calculated DFT/B3LYP and experimental C and O NMR chemical shifts, ab initio HF/6-31G* optimised structures, and single crystal X-ray structures of some substituted methyl 5β-cholan-24-oates

Single crystal X-ray structures (monoclinic space group P2₁) for methyl 3-oxo-5β-cholan-24-oate and methyl 3,12-dioxo-5β-cholan-24-oate have been solved and compared with HF/6-31G* optimised structures. In the crystalline packings the side chains are connected with weak OC(sp³)HO-type of interactions between C25–H and C24–O–C25 and the keto ends with weak C(sp³)HO=C-type of interactions between C4–H and O=C3. The orientations of the side chains, which steric configurations are of great importance to the biological activity of the molecules, are compared with the experimental structure of methyl 3-hydroxy-5β-cholan-24-oate. Probable reasons for the observed differences are discussed. In addition, ¹³C and ¹⁷O NMR chemical shifts of methyl 3-oxo-5β-cholan-24-oate and methyl 3,12-dioxo-5β-cholan-24-oate as well as the epimeric methyl 3-hydroxy-5β-cholan-24-oate and methyl 3β-hydroxy-5β-cholan-24-oate have been calculated (DFT/B3LYP/6-311G*) and compared with the experimental values by linear regression analyses. In general, the correspondence between the theoretical and experimental parameters is good or excellent.     

若干镧系络合物的空间群

摘要 藉助模拟强度精修将九个镧系络合物晶体结构的空间群作了修正 .（ 1） NaN[Nd(DMSO)5(H2O)3]Cl3· 3H2O从 P1修正为 P;（ 2） Er(ClO4)3· 6(CH3)2NC(O)N(CH3)2从 P修正为 R;（ 3） Nd(O3SCF3)3· DMF· 6H2O从 P1修正为 R3m;(4)[NaNCCH3][Nd{S2CN(CH2CH3)2}4]从 P修正为 C 2/c;(5)[(CH3)2NCS2]3La· 2DMSO从 Cc修正为 C 2/c;（ 6） Yb(C9H7)2· 2THF从 Cc修正为 C 2/c;（ 7） [(C6H5)3Ge]2Yb· 4THF从 P21修正为 P 2;(8)TlPr(C36H44N4)2从 Pna2,修正为 Pnma;(9)[CuLaSm(C4O4)4(H2O)16]· 2H2O从 P2修正为 P2.（ 8）、（ 9）两个络合物结构从非心修正到有心时,不仅改进了键长与键角值,而且影响到分子结构特征的描述 .     

A computational study on the reactivity enhancement in the free radical polymerization of alkyl α‐hydroxymethacrylate and acrylate derivatives

The free radical polimerizability behavior of alkyl α‐hydroxymethacrylate (RHMA) derivatives ( M1–M3 ) has been modeled by considering the propagation of the dimeric units of the compounds of interest. All the transition structures in this class of monomers are stabilized by long‐range C?O…H? C interactions. The RHMA monomer bearing the ester functionality ( M2 ) polymerizes slightly faster than the one with the ether functionality ( M1 ) because of stronger electrostatic interactions between the C?O and H? C groups. 2‐(Methoxycarbonyl)allyl benzoate ( M3 ) shows higher reactivity as compared to M1 and M2 due to stronger electrostatic interactions. The same type of study has been carried out for hexyl ( M4 ), benzyl ( M5 ), and phenyl ( M6 ) acrylate derivatives whose increasing reactivity has been attributed to the presence of C?O…H? C, C?O…H‐? as well as π–π stabilizing interactions, respectively. While B3LYP/6‐31+G(d) has been used to locate the stationary points along the free radical polymerization of nonaromatic species, long‐range stabilizing interactions have only been detected with M06‐2X/6‐31+G(d). The kinetics that we obtain with this latter methodology for the free radical polymerization reactions of M1 – M6 agree well qualitatively with experiment. An implicit solvent model has reproduced the kinetics of M1–M3 in benzene the best. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis, structure and theoretical study of mixed fluoro-trifluoromethyl derivatives of C60. Molecular structures of C60F18(CF3)6 and C60F16(CF3)6

A series of novel mixed C60Fn(CF3)m compounds has been produced by trifluoromethylation of C60F18 with CF3I in ampoules at 380-420 degrees C. Two of these compounds, C60F18(CF3)6 and C60F16(CF3)6, have been characterized by X-ray crystallography, which has revealed addition of six CF3 groups to the C3v-C60F18 for the former and replacement/elimination of two outermost F atoms in the latter. Quantum chemical calculations have been employed to predict the most stable possible isomers of C60F16/18(CF3)6 in order to rationalize the experimental results.     

焙烧温度对CuO/γ-Al2O3和CeO2-CuO/γ-Al2O3催化剂NO还原活性的影响

用浸渍法制备了CuO/γ-Al2O3催化剂和CeO2改性的CeO2-CuO/γ-Al2O3催化剂,考察了焙烧温度对CuO/γ-Al2O3和CeO2-CuO/γ-Al2O3催化剂C3H6还原NO反应活性的影响,以及CeO2的添加量对CeO2-CuO/γ-Al2O3催化剂C3H6还原NO反应活性的影响。结果表明,在200 ℃～500 ℃的焙烧温度范围内,焙烧温度对CuO/γ-Al2O3催化剂的活性影响很小；在500 ℃～800 ℃的焙烧温度范围内,随着焙烧温度的升高CuO/γ-Al2O3催化剂的活性急剧下降,由XRD物相测定结果可知,归因于对反应表现惰性的尖晶石CuAl2O4相的生成。当焙烧温度为500 ℃时,CeO2的添加对CuO/γ-Al2O3催化剂的活性影响很小；当焙烧温度为800 ℃时,CeO2的添加对CuO/γ-Al2O3催化剂有明显的助催化作用,当Ce和Cu的摩尔比为1∶10时,NO转化率较为理想。     

DFT Study on the Structural, Electronic, and Spectroscopic Properties of the Highest Epoxygenated Fullerene C36O18

Theoretical investigation on the highest epoxygenated fullerene C36O18 formed from the initial C36 fullerene with D6h symmetry has been performed at the B3LYP/6-31G(d) level. Their equilibrium structures, thermal stabilities, electronic structures, vertical ionization potentials, vertical electron affinities, vibrational frequencies and 13C NMR chemical shifts have been studied. The calculation results showed that C36O18 isomers have higher LUMO-HOMO energy gaps than the fullerene C36 and should be more stable. Compared with C36 , it is less possible for C36O18 to accept or donate electrons from reduced VEAs and enhanced VIPs. It has been found that C36O18 isomers are not aromatic at all or antiaromatic on analyzing the NICS values. The present study will encourage further theoretical and experimental analyses of this system in future.     

Spectroscopic identification of oxonium and carbenium ions of protonated phenol in the gas phase: IR spectra of weakly bound C6H7O+ -L dimers (L = Ne, Ar, N2)

Structural isomers of isolated protonated phenol (C(6)H(7)O(+)) are characterized by infrared (IR) photodissociation spectroscopy of their weakly bound complexes with neutral ligands L (L = Ne, Ar, N(2)). IR spectra of C(6)H(7)O(+)-L recorded in the vicinity of the O-H and C-H stretch fundamentals carry unambiguous signatures of at least two C(6)H(7)O(+) isomers: the identified protonation sites of phenol include the O atom (oxonium ion, O-C(6)H(7)O(+)) and the C atoms of the aromatic ring in the ortho and/or para position (carbenium ions, o/p-C(6)H(7)O(+)). In contrast, protonation at the meta and ipso positions is not observed. The most stable C(6)H(7)O(+)-L dimer structures feature intermolecular H-bonds between L and the OH groups of O-C(6)H(7)O(+) and o/p-C(6)H(7)O(+). Extrapolation to zero solvation interaction yields reliable experimental vibrational frequencies of bare O-C(6)H(7)O(+) and o/p-C(6)H(7)O(+). The interpretation of the C(6)H(7)O(+)-L spectra, as well as the extrapolated monomer frequencies, is supported by B3LYP and MP2 calculations using the 6-311G(2df,2pd) basis. The spectroscopic and theoretical results elucidate the effect of protonation on the structural properties of phenol and provide a sensitive probe of the activating and ortho/para directing nature of the OH group observed in electrophilic aromatic substitution reactions.     

Ozone-water 1:1 complexes O3-H2O: an ab initio study

Ab initio MO calculations have been carried out for the ozone-water 1:1 complexes in order to elucidate the structures and electronic state of the complexes. The QCISD calculations indicated that three structures are obtained as stable forms of O(3)-H(2)O. The most stable structure of O(3)-H(2)O has C(s) symmetry where the central oxygen of O(3) and all atoms of H(2)O are located on the molecular C(s) plane. The dipole of H(2)O orients toward the central oxygen atom of O(3) (i.e., dipole orientation form). The other two forms are cis and trans forms of O(3)-H(2)O where all atoms are located on the molecular plane, and a hydrogen of H(2)O binds to one of the terminal oxygen atoms of O(3) by a hydrogen bond. The binding energies of O(3) to H(2)O for dipole, cis, and trans forms are calculated to be 2.39, 2.27, and 2.30 kcal/mol, respectively, at the QCISD(T)/6-311++G(3df,3pd)//QCISD/6-311++G((d,p) level. The dipole orientation form is more stable in energy than the cis and trans forms. Rotational constants for the dipole orientation form are calculated to be A = 11.897, B = 4.177, and C = 3.318 GHz which are in good agreement with the experimental values (A = 11.961, B = 4.174, and C = 3.265 GHz). The electronic states of O(3)-H(2)O were discussed on the basis of theoretical results.     

新型多环吡咯并双螺环色满酮氧化吲哚类化合物的合成

以3-羟甲基色酮为原料,在4-二甲氨基吡啶催化下与(Boc)2O反应生成中间体A;A与靛红和脯氨酸生成的1,3-偶极子发生[3+2]环加成反应,合成了8个未见文献报道的多环吡咯并双螺环色满酮氧化吲哚类化合物(3a^3h),收率50%~67%,dr值4/1~2/1,其结构经^1H NMR,^13C NMR和HR-MS(ESI-TOF)表征。确定了化合物3a(CCDC:1973858)和3g(CCDC:1973859)的相对构型。结果表明:该类化合物含有连续5个立体中心,包括两个螺环季碳中心。     

The first designed syntheses of bis-dimetal molecules in which the bridges are diamidate ligands

The first deliberate syntheses of molecules in which pairs of quadruply bonded Mo2 units are bridged by N,N'-diarylterephthaloyldiamidate (aryl = Ph, m-CF3Ph) ligands are described. The addition of neutral N,N'-diarylterephthaloyldiamide to 2 equiv of [Mo2(DAniF)3(MeCN)2]+ (DAniF = N,N'-di-p-anisylformamidinate) followed by the introduction of excess H3CO- in MeCN results in the formation of (DAniF)3Mo2[(C6H5)NC(O)C6H4(O)CN(C6H5)]Mo2(DAniF)3 (1) and (DAniF)3Mo2[[(m-CF3)C6H5]NC(O)C6H4(O)CN[(m-CF3)C6H5]]Mo2(DAniF)3 (2). The DeltaE1/2 for the oxidation of each Mo2 unit is greater for these terephthaloyldiamidate-bridged molecules (approximately 100 mV) than for the analogous terephthalate-bridged compound (approximately 60 mV). Variation in the nature of the substituents on the diamidate nitrogen atoms offers a means to fine-tune the oxidation potentials of the Mo2 units.