葡萄糖和N-乙酰-D-氨基葡萄糖作为手性固定相的研究

以3-氨基丙基三乙氧基硅烷、3-异氰酸丙基三乙氧基硅烷和3-缩水甘油醚氧基丙基三甲氧基硅烷作为键合臂,将葡萄糖和N-乙酰-D-氨基葡萄糖键合到硅胶上作为高效液相色谱手性固定相,对15种手性化合物进行拆分.研究结果表明:不同的键合臂对它们的手性分离能力有较大的影响,葡萄糖及其衍生物是一类具有良好实用前景的手性固定相.     

聚γ-(β-氰乙基)胺丙基硅氧烷铂配合物的合成与催化性能

γ-氨丙基三乙氧基硅烷与丙烯腈反应，得到γ-(β-氰乙基)胺丙基三乙氧基硅烷。后者用气相法二氧化硅固载，再与氯亚铂酸钾反应，合成了聚γ-(β-氰乙基)胺丙基硅氧烷铂配合物。研究了它对不饱和烃与三乙氧基硅烷的硅氢加成反应的催化特性。     

聚-γ-氨丙基硅氧烷-铂络合物对不饱和化合物的硅氢加成的催化活性和选择性

硅氢加成反应是把Si—H键加到不饱和烃上,生成含有饱和有机基团的硅烷的反应:此反应可由某些金属和金属卤化物催化.近年来,出现了一些对硅氢加成反应具有一定催化活性,而且容易回收使用的高分子催化剂.例如,Capka等人报道了带有二苯基膦、二甲胺基和氰基的交联聚苯乙烯,带有二苯基膦的交联聚丙烯酸与铑或铂的络合物. 我们在烟雾状二氧化硅(普通市售)表面上,进行了γ-氨丙基三乙氧基硅烷的水解缩合,制备了以二氧化硅为载体的聚-γ-氨丙基硅氧烷.然后使其和水合铂氯酸作用,得到聚-γ-氨丙基硅氧烷—铂络合物:     

玻璃珠表面修饰氨基的新型固相合成载体的制备

以玻璃珠为基质,通过NH3/H2O2/H2O处理,完成表面羟基化修饰;再采用氨丙基三乙氧基硅烷的甲苯溶液处理,完成硅烷氨基化修饰羟基制得表面功能基团为氨基的新型固相合成载体(1),其氨基含量为8.9×10-3mmol·g-1。1与连接分子4-[4-(羟甲基)苯氧基]-甲基苯甲酸经过氨基与羧基缩合反应制得带连接臂的固相载体;再与Fmoc保护的甘氨酸反应和脱保护,成功地键合甘氨酸,充分证明1作为新型载体的可行性。     

氨丙基官能化HMS介孔分子筛的合成及表征

沿S0I0路径,以十六胺为模板剂,以3-氨丙基三乙氧基硅烷为有机硅源,通过与TEOS共水解沉淀合成了氨丙基官能化HMS介孔分子筛.采用粉末X-射线衍射分析、N2吸/脱附、扫描电镜分析、高分辨透射电镜分析、傅立叶变换红外分析以及元素分析等表征手段,对所合成的材料进行表征.氨丙基官能化HMS介孔分子筛具有worm-like孔道结构,且较为均一的孔径分布.研究了前体硅源中3-氨丙基三乙氧基硅烷含量的变化对氨丙基官能化HMS介孔分子筛的相结构及织构性能的影响.傅立叶变换红外分析表明,NH2-CH2-CH2-CH2有机基团分布在杂化HMS介孔孔道中.     

通过硅烷偶联剂在硅和铟锡氧化物(ITO)表面嫁接寡聚芴分子

通过硅烷偶联剂γ-氨丙基三乙氧基硅烷(3-aminopropyl-triethoxysilane,APTES)的“分子桥梁”作用,采用两种不同的方法,把修饰后的寡聚芴分子键联到硅表面和铟锡氧化物(ITO)表面上。X射线光电子能谱(XPS)、原子力显微镜(AFM)和循环伏安(CV)方法等的表征证实了通过硅烷偶联剂在硅表面和ITO表面嫁接寡聚芴分子可行性。     

多孔硅球的活化和硅烷化

经甲烷磺酸水溶液活化处理的多孔硅球与γ－氨丙基三乙氧基硅烷的反应能力较浓盐酶活化方法有显著提高；多孔硅球与γ－氨丙基三乙氧基硅烷的反应由两个步骤组成，即先室温反应然后再回流；用改进方法制备的氨丙基硅烷化多孔硅球固定化胰凝乳蛋白酶时，其酶活力满足选择催化ＤＬ－苯丙氨酸甲酯水解的需要，相同反应条件下，多孔硅球比表面积越大，氨丙基硅烷化产物氨基含量越高。     

金在氨基硅烷修饰SBA-15上的巴豆醛选择加氢性能

采用三种氨基硅烷试剂(APTS: 3-氨丙基三甲氧基硅烷, TPED: N-(2-氨乙基)-3-氨丙基三甲氧基硅烷, TPDT: 3-[2-(2-氨基乙基氨基)乙基氨基]丙基-三甲氧基硅烷)对介孔SBA-15分子筛进行后嫁接表面功能化(分别记为APTS-SBA-15, TPED-SBA-15和TPDT-SBA-15), 然后利用氨基与氯金酸之间的静电作用及化学还原法, 将金纳米粒子引入分子筛的介孔孔道. 采用N₂物理吸附、X射线衍射(XRD)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)等手段对催化剂的结构和电子性质进行了系统表征; 以巴豆醛液相加氢制巴豆醇反应比较了氨基硅烷的种类对催化性能的影响. 结果表明, 氨基硅烷的给电子能力是决定金催化剂上C＝O键加氢选择性的主要因素, 氨基硅烷的给电子能力越强, 金活性位上的电子密度越高, 则巴豆醇的选择性和收率就越高.     

纤维素-三(4-甲基苯甲酸酯)手性固定相的制备及对映异构体拆分

以微晶纤维素和对甲基苯甲酰氯为原料,合成了纤维素-三(4-甲基苯甲酸酯),并以3-氨丙基-三乙氧基硅烷修饰的硅胶为载体,制备了涂敷型纤维素-三(4-甲基苯甲酸酯)液相色谱固定相,对该固定相进行了表征,并在正相条件下对13种对映异构体进行了拆分,其中9种得到了分离,该柱表现出良好的手性分离性能.     

原子层沉积法制备巯丙基硅胶及其对溶液中钯(Ⅱ)离子的吸附行为

采用原子层沉积技术, 在3~5 kPa真空和125~150 ℃ 的反应条件下, 使γ-巯丙基三甲氧基硅烷(MPTMS)、γ-巯丙基三乙氧基硅烷(MPTES)和γ-巯丙基二甲氧基甲基硅烷(MPDMMS)3种巯丙基硅烷试剂气化, 并在三乙胺的催化作用下, 分别将其键合于多孔硅胶表面, 制得贵金属钯(Ⅱ)的高效吸附剂. 分别采用FTIR、¹³C和²⁹Si固体核磁、元素分析、热重分析和氮气吸附-脱附等技术研究了巯基硅胶的键合模式和功能基团键合量. 用分光光度法研究了在pH=3.0条件下水溶液中Pd(Ⅱ)离子在巯基硅胶上的吸附行为. 结果表明, 在MPTMS, MPTES和MPDMMS所修饰的硅胶中, 硅烷试剂的功能基团均以双齿键合结构为主, 表面键合量分别达到2.76, 2.53和2.70 μmol/m². 对Pd(Ⅱ)离子的吸附遵从Langmuir等温吸附方程, 饱和吸附量分别达到5.45, 4.21和4.81 μmol/m², Pd/S的摩尔比分别为1.44, 1.35和1.39. 原子层沉积法制备的巯丙基硅胶基质钯吸附剂的巯基键合密度和对钯(Ⅱ)离子的吸附容量均比传统的有机溶剂介质法高.     

Biphasic synthesis of Au@SiO2 core-shell particles with stepwise ligand exchange

We report the synthesis of well-dispersed core-shell Au@SiO(2) nanoparticles with minimal extraneous silica particle growth. Agglomeration was suppressed through consecutive exchange of the stabilizing ligands on the gold cores from citrate to L-arginine and finally (3-mercaptopropyl)triethoxysilane. The result was a vitreophilic, stable gold suspension that could be coated with silica in a biphasic mixture through controlled hydrolysis of tetraethoxysilane under L-arginine catalysis. Unwanted condensation of silica particles without gold cores was limited by slowing the transfer across the liquid-liquid interface and reducing the concentration of the L-arginine catalyst. In-situ dynamic light scattering and optical transmission spectroscopy revealed the growth and dispersion states during synthesis. The resulting core-shell particles were characterized via dynamic light scattering, optical spectroscopy, and electron microscopy. Their cores were typically 19 nm in diameter, with a narrow size distribution, and could be coated with a silica shell in multiple steps to yield core-shell particles with diameters up to 40 nm. The approach was sufficiently controllable to allow us to target a shell thickness by choosing appropriate precursor concentrations.     

Thin silica films on Ru(0001): monolayer, bilayer and three-dimensional networks of [SiO4] tetrahedra

The atomic structure of thin silica films grown over a Ru(0001) substrate was studied by X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, low energy electron diffraction, helium ion scattering spectroscopy, CO temperature programmed desorption, and scanning tunneling microscopy in combination with density functional theory calculations. The films were prepared by Si vapor deposition and subsequent oxidation at high temperatures. The silica film first grows as a monolayer of corner-sharing [SiO(4)] tetrahedra strongly bonded to the Ru(0001) surface through the Si-O-Ru linkages. At increasing amounts of Si, the film forms a bilayer of corner-sharing [SiO(4)] tetrahedra which is weakly bonded to Ru(0001). The bilayer film can be grown in either the crystalline or vitreous state, or both coexisting. Further increasing the film thickness leads to the formation of vitreous silica exhibiting a three-dimensional network of [SiO(4)]. The principal structure of the films can be monitored by infrared spectroscopy, as each structure shows a characteristic vibrational band, i.e., ～1135 cm(-1) for a monolayer film, ～1300 cm(-1) for the bilayer structures, and ～1250 cm(-1) for the bulk-like vitreous silica.     

三甲基氯硅烷对纳米多孔二氧化硅薄膜的修饰

以正硅酸乙酯为先驱体,采用溶胶-凝胶法,结合旋转涂胶、超临界干燥工艺在硅片上制备了纳米多孔SiO2薄膜.用三甲基氯硅烷(TMCS)对该SiO2薄膜进行了表面修饰,采用FTIR、TG-DTA、AFM和椭偏仪等方法研究了TMCS修饰前后薄膜的结构、形貌、厚度与介电常数等性能.超临界干燥后的SiO2薄膜含有Si－O－Si与Si－OR结构,呈疏水性.在空气中250 ℃以上热处理后SiO2薄膜因含有Si－OH而呈吸水性. TMCS修饰后的SiO2薄膜在温度不高于450 ℃时可保持其疏水性和多孔结构. SiO2薄膜经TMCS修饰后基本粒子和孔隙尺寸增大,孔隙率提高,介电常数可降低至2.5以下.     

Preparation and properties of silica–gold core–shell particles

Silica-metal core–shell particles, as for instance those having siliceous core and nanostructured gold shell, attracted a lot of attention because of their unique properties resulting from combination of mechanical and thermal stability of silica and magnetic, electric, optical and catalytic properties of metal nanocrystals such as gold, silver, platinum and palladium. Often, the shell of the core–shell particles consists of a large number of metal nanoparticles deposited on the surface of relatively large silica particles, which is the case considered in this work. Namely, silica particles having size of about 600 nm were subjected to surface modification with 3-aminopropyltrimethoxysilane. This modification altered the surface properties of silica particles, which was demonstrated by low pressure nitrogen adsorption at ?196 °C. Next, gold nanoparticles were deposited on the surface of aminopropyl-modified silica particles using two strategies: (i) direct deposition of gold nanoparticles having size of about 10 nm, and (ii) formation of gold nanoparticles by adsorption of tetrachloroauric acid on aminopropyl groups followed by its reduction with formaldehyde.The overall morphology of silica–gold particles and the distribution of gold nanoparticles on the surface of modified silica colloids were characterized by scanning electron microscopy. It was shown that direct deposition of colloidal gold on the surface of large silica particles gives more regular distribution of gold nanopartciles than that obtained by reduction of tetrachloroauric acid. In the latter case the gold layer consists of larger nanoparticles (size of about 50 nm) and is less regular. Note that both deposition strategies afforded silica–gold particles having siliceous cores covered with shells consisting of gold nanoparticles of tunable concentration.     

Synthesis of contiguous silica-gold core-shell structures: critical parameters and processes

A direct process for preparing contiguous gold shells (15-25 nm thick) over amorphous silica spheres (200 nm) is described. In this method, gold seeds are synthesized from HAuCl(4) in a dilute NaOH solution using deposition-precipitation with subsequent metallization by sodium borohydride (NaBH(4)). The ease of dispersing gold nanocrystals on spheres of bare silica and spheres after grafting with ammonia was studied as a function of pH (4-8), reaction temperature (65-96 degrees C), and time (5-30 min). Additional parameters requiring optimization included the quantity of NaBH4 and the HAuCl(4) in K(2)CO(3) solution to silica volume ratio. The evolution of gold nanocrystal growth was monitored by transmission electron microscopy, and the bathochromic shift of ultraviolet-visible absorption was correlated with shell perfection and thickness.     

Preparation, characterization, and optical properties of gold, silver, and gold-silver alloy nanoshells having silica cores

This report describes the structural and optical properties of a series of spherical shell/core nanoparticles in which the shell is comprised of a thin layer of gold, silver, or gold-silver alloy, and the core is comprised of a monodispersed silica nanoparticle. The silica core particles were prepared using the St?ber method, functionalized with terminal amine groups, and then seeded with small gold nanoparticles (approximately 2 nm in diameter). The gold-seeded silica particles were coated with a layer of gold, silver, or gold-silver alloy via solution-phase reduction of an appropriate metal ion or mixture of metal ions. The size, morphology, and elemental composition of the composite nanoparticles were characterized by field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, thermal gravimetric analysis (TGA), dynamic light scattering (DLS), and transmission electron microscopy (TEM). The optical properties of the nanoparticles were analyzed by UV-vis spectroscopy, which showed strong absorptions ranging from 400 nm into the near-IR region, where the position of the plasmon band reflected not only the thickness of the metal shell, but also the nature of the metal comprising the shell. Importantly, the results demonstrate a new strategy for tuning the position of the plasmon resonance without having to vary the core diameter or the shell thickness.     

Charging/discharging of Au (core)/silica (shell) nanoparticles as revealed by XPS

By recording XPS spectra while applying external voltage stress to the sample rod, we can control the extent of charging developed on core-shell-type gold nanoparticles deposited on a copper substrate, in both steady-state and time-resolved fashions. The charging manifests itself as a shift in the measured binding energy of the corresponding XPS peak. Whereas the bare gold nanoparticles exhibit no measurable binding energy shift in the Au 4f peaks, both the Au 4f and the Si 2p peaks exhibit significant and highly correlated (in time and magnitude) shifts in the case of gold (core)/silica (shell) nanoparticles. Using the shift in the Au 4f peaks, the capacitance of the 15-nm gold (core)/6-nm silica (shell) nanoparticle/nanocapacitor is estimated as 60 aF. It is further estimated that, in the fully charged situation, only 1 in 1000 silicon dioxide units in the shell carries a positive charge during our XPS analysis. Our simple method of controlling the charging, by application of an external voltage stress during XPS analysis, enables us to detect, locate, and quantify the charges developed on surface structures in a completely noncontact fashion.     

Facile One‐Pot Fabrication of Hollow Porous Silica Nanoparticles

A method for the fabrication of hollow silica nanospheres, a facile one‐pot hydrothermal route, is described. Heating of an aqueous solution of water glass and D ‐glucose to 180 °C for 24 h affords—as indicated by transmission electron microscopy—a nanospherical composite consisting of a silica shell sheathing a carbonaceous core. Subsequent removal of the carbonaceous interior through oxidation in air produces hollow silica structures. Variation of the concentration of the two jointly dissolved chemicals enables a variation of the thickness of the silica shell. The hollow silica particles were characterized by means of SEM, TEM, XRD, IR spectroscopy, thermogravimetrical analysis (TGA), and sorption measurements.     

Aniline incorporated silica nanobubbles

We report the synthesis of stearate functionalized nanobubbles of SiO₂ with a few aniline molecules inside, represented as C₆H₅NH₂@SiO₂@stearate, exhibiting fluorescence with red-shifted emission. Stearic acid functionalization allows the materials to be handled just as free molecules, for dissolution, precipitation, storage etc. The methodology adopted involves adsorption of aniline on the surface of gold nanoparticles with subsequent growth of a silica shell through monolayers, followed by the selective removal of the metal core either using sodium cyanide or by a new reaction involving halocarbons. The material is stable and can be stored for extended periods without loss of fluorescence. Spectroscopic and voltammetric properties of the system were studied in order to understand the interaction of aniline with the shell as well as the monolayer, whilst transmission electron microscopy has been used to study the silica shell.     

液相沉积法制备TiO2颗粒表面包覆SiO2纳米膜

研究了用液相沉积法在TiO2颗粒表面包覆SiO2纳米膜的过程.通过透射电镜(TEM)和酸溶实验分析,证实本实验在TiO2颗粒表面包覆了一层连续、致密的SiO2纳米膜.ζ-电位分析表明,颗粒表面只需少量包覆就可以显著改变颗粒表面的电动力学行为.采用 X射线荧光光谱分析仪（XRF）测定SiO2包覆量随包覆过程的变化.通过X射线光电子能谱（XPS）分析,获得Ti 2p、Si 2p及 O 1s电子结合能及其相对强度随包覆过程的变化规律,揭示硅酸分子在TiO2颗粒表面的包覆过程.分析表明,初期形成的活性硅酸分子与TiO2颗粒表面的羟基反应形成Ti－O－Si键,后期形成的硅酸分子与已键合在表面的硅酸发生缩合反应,形成连续致密的硅膜,膜层在陈化过程中继续缓慢生长.