表面引发的原子转移自由基聚合法在聚偏二氟乙烯表面制备可控的聚甲基丙烯酸甲酯刷

采用表面引发的原子转移自由基聚合法(ATRP)在聚偏二氟乙烯(PVDF)表面制备结构可控的聚甲基丙烯酸甲酯刷。通过碱处理和紫外光照溴代的方法,将ATRP引入到PVDF表面; 然后采用ATRP法将甲基丙烯酸甲酯接枝到溴代的PVDF表面。采用傅里叶变换红外光谱和X-射线光电子能谱对改性前后PVDF表面的结构进行了表征。结果表明甲基丙烯酸甲酯成功地接枝到了PVDF表面。     

两亲性纤维素接枝聚脱氢枞酸共聚物的制备及性能研究

通过均相原子转移自由基聚合法(ATRP)将生物质基疏水性松香单体(脱氢枞酸(2-甲基丙烯酰氧基乙基)酯,MAEDA)接枝到纤维素骨架上合成了全生物质基两亲性的纤维素-g-聚脱氢枞酸接枝共聚物(cellulose-g-PMAEDA).ATRP反应过程动力学研究表明cellulose-g-PMAEDA接枝共聚物的合成过程是活性可控的;傅里叶红外光谱(FTIR)、核磁共振氢谱(1H-NMR)、凝胶色谱(GPC)和X射线衍射(XRD)结果证实了cellulose-g-PMAEDA接枝共聚物的成功合成;由于聚脱氢枞酸侧链的引入,cellulose-g-PMAEDA接枝共聚物的热稳定性,疏水性能明显提高,并且具有紫外吸收性能;动态光散射仪和透射电镜结果表明两亲性cellulose-g-PMAEDA接枝共聚物能够在水溶液中自组装成平均粒径约为200 nm左右的纳米微球,并且该纳米微球具有以纤维素为壳,聚脱氢枞酸酯为核的核壳结构.     

原子转移自由基聚合法制备表面聚合物接枝四氧化三铁纳米粒子

为制备表面具有柔性高分子链的磁性微球,采用化学共沉淀法制备了具有超顺磁性的Fe3O4纳米微球,用KH550对Fe3O4纳米微球进行化学改性得到表面氨基化的Fe3O4纳米微球,与2-溴代异丁酰溴反应后制得含有引发官能团的Fe3O4纳米微球,随后将含溴的Fe3O4纳米微球与小分子单体与之通过原子转移自由基聚合(ATRP)法共聚。测试结果表明聚合物链成功地接枝到了Fe3O4纳米微球表面。     

两种不同取代结构C_(60)-苯乙烯共聚物薄膜微摩擦性能的研究

用自由基聚合法合成星状C6 0 苯乙烯共聚物和用原子转移自由基聚合法 (ATRP)合成单取代C6 0 苯乙烯共聚物 ,利用LB技术考察了它们的成膜性能并制备了多层薄膜 ,运用原子力显微镜 摩擦力显微镜(AFM FFM)初步研究比较这两种不同取代结构C6 0 苯乙烯共聚物薄膜的表面形貌和在极轻载荷下的微摩擦性能 .研究结果显示了星状C6 0 苯乙烯共聚物相对具有较好的润滑性能     

用于大分子定向自组装的新型嵌段共聚物的合成与表征

设计了具有高Flory-Huggins相互作用参数的嵌段共聚物聚(对叔丁基苯乙烯)-b-聚(甲基丙烯酸羟乙酯)(PtBS-b-PHEMA),并分别采用阴离子聚合和原子转移自由基聚合(ATRP)方式制备了不同嵌段比例、不同分子量的窄分子量分布的该嵌段共聚物。利用核磁共振分析了嵌段共聚物的组分,利用小角X射线散射(SAXS)分析了嵌段共聚物相分离后的尺寸及结构,对比研究了两种聚合方式对嵌段共聚物性能的影响。结果表明,采用阴离子聚合方式得到的嵌段共聚物分子量分布更窄,相同分子量下发生微相分离的尺寸更小,其在150℃真空烘箱中加热18h后可以形成尺寸为9.96nm的柱状相及8.42nm的层状相。     

活性自由基聚合法合成新型裘皮型羧酸酯基功能高分子

采用原子转移自由基聚合反应(ATRP)经二步法合成了一种裘皮型羧酸酯基功能高分子.首先以氯化亚铜-联吡啶络合物(CuCl-bPy)为催化体系,以a-溴代丙酸乙酯(EBP)为引发剂、乙腈(AN)为溶剂在80℃进行甲基丙烯酸甲酯(MMA)的均相ATRP反应,合成得到带溴原子端基的线型聚甲基丙烯酸甲酯(PMMA-Br),其分子量分布呈单分散性(Mn=7.5～8.6x 104,PDI≤1.08);利用所合成PMMA-Br为大分子引发荆、二乙烯基苯(DVB)为单体(交联剂)、氯化亚铜*五甲基二亚乙基三胺(CuCl·PMDETA)为催化剂,在110℃苯甲醚(PME)溶液中进行DVB的活性原子转移自由基聚合反应,合成得到了一种12臂,臂长为120nm～140nm的裘皮型羧酸酯基功能高分子.分析结果表明,所合成裘皮树脂的尺寸均一性良好(PDI≤1.54).     

原子转移自由基聚合合成聚乙烯胺大分子单体及其共聚反应研究

以水为反应介质, 采用原子转移自由基聚合(ATRP), 在70 ℃下合成了末端为溴原子的聚丙烯酰胺预聚体(PAM-Br). 利用水相凝胶渗透色谱(GPC)对PAM-Br的相对分子质量和分子量分布进行了表征, 结果表明: 单体浓度、单体与引发剂物质的量之比和反应时间对PAM-Br的分子量及其分布有较大的影响, 在较低AM单体与引发剂物质的量比条件下, 其聚合过程符合ATRP的基本规律. 进而使PAM-Br预聚体末端的溴原子与甲基丙烯酸(MAA)进行亲核取代反应, 得到了末端带有不饱和双键的大分子单体(MAA-PAM). 并利用霍夫曼降解制备出了部分胺解的聚乙烯胺(MAA-PVAm)大分子单体, 其结构由傅里叶变换红外(FTIR)和核磁共振仪(NMR)的表征得到了确定. 以得到的大分子单体为反应性分散稳定剂, 与苯乙烯在乙醇/水的混合介质中进行分散共聚反应, 制得了聚苯乙烯接枝MAA-PVAm (PS-g-PVAm)复合微球, 由扫描电子显微镜(SEM)观察发现: 微球保持规整的球形结构, 粒径分布均一, 有较好的单分散性.     

利用原子转移自由基聚合方法制备一种新型聚合物整体柱固相萃取材料初探

利用两步原子转移自由基聚合(ATRP)方法,初步建立了新型聚合物整体柱固相萃取(SPE)材料制备的新方法。首先利用ATRP方法,以乙二醇二甲基丙烯酸酯（EDMA）为交联剂,在室温条件下,在滤头中原位快速聚合制备得到负载有聚合物整体柱的萃取装置;然后采用表面诱导的电子转移活化再生原子转移自由基聚合(ARGET ATRP)方法进行表面修饰,得到了聚(二甲基氨基乙基甲基丙烯酸酯)(PDMAEMA)修饰的柱体;进一步将此整体柱用作萃取材料,实现了对激素类药物的富集分析。本研究表明:ATRP有望作为一种简单、有效及反应条件温和的聚合方法用于整体柱的制备,且该方法有潜力实现固相萃取材料在不同装置中的制备。     

机理转移法合成聚丁二烯-b-聚(甲基丙烯酸N,N-二甲氨基乙酯)两亲性嵌段共聚物

将活性负离子聚合与原子转移自由基聚合(ATRP)技术相结合,运用机理转移法制备了一种两亲性材料聚丁二烯-b-聚(甲基丙烯酸N,N-二甲氨基乙酯)(PB-b-PDMAEMA)嵌段共聚物.首先通过负离子聚合方法设计合成聚丁二烯,用环氧丙烷封端,2-溴异丁酰溴作酯化剂,合成具有活性端基溴的聚丁二烯大分子引发剂(PB-B r),再用其引发亲水性单体DMAEMA进行原子转移自由基聚合,聚合动力学证实了该聚合反应具有典型的活性/可控自由基聚合的特征.通过差示扫描量热法(DSC)研究嵌段共聚物的微相分离行为.制备的大分子引发剂及两亲性嵌段共聚物经凝胶色谱、红外和核磁表征证实了预定的结构.     

原子转移自由基聚合原位合成温敏性微球

以过硫酸钾为引发剂、丙酮-水[V(丙酮)∶V(水)＝4∶6]的混合溶剂为反应介质, 在少量二乙烯苯存在的条件下使苯乙烯(St)和对氯甲基苯乙烯(CMSt)进行无皂乳液共聚反应, 得到了粒径大小均匀的交联型聚苯乙烯(PSt)微球, 由X射线光电子能谱对表面组分测定发现: CMSt上的氯原子在聚合过程中富集于交联微球的表面. 以此交联型PSt微球为原子转移自由基聚合(ATRP)的引发剂, 在22 ℃下引发N-异丙基丙烯酰胺(NIPAAm)进行原位ATRP反应, 得到了表面原子转移自由基聚合接枝的交联聚苯乙烯(PNIPAAm-g-PSt)温敏性微球. 借助傅立叶变换红外光谱、差示扫描量热仪、扫描电子显微镜及激光光散射仪等对PNIPAAm-g-PSt的结构、相转变温度、形态及不同温度下的粒径变化进行了测定, 结果表明NIPAAm单体成功地原位ATRP接枝在交联PSt微球的表面, 接枝微球的球形更规整, 在水中的相转变温度约为32 ℃, 具有明显的温度敏感性.     

NARROW-DISPERSED CROSSLINKED CORE-SHELL POLYMER MICROSPHERES PREPARED BY SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION＊

Grafting of polystyrene with narrowly dispersed polymer microspheres through surface-initiated atom transfer radical polymerization (ATRP) was investigated. Polydivinylbenzene (PDVB) microspheres were prepared by dispersion polymerization with poly(N-vinyl pyrrolidone) (PVP) as stabilizer. The surfaces of PDVB microspheres were chloromethylated by chloromethyl methyl ether in the presence of zinc chloride as catalyst to form chloromethylbenzene initiating core sites for subsequent ATRP grafting of styrene using CuCl/bpy as catalytic system. Polystyrene was found to be grafted not only from the particle surfaces but also from within a thin shell layer, resulting in the formation of particles size increased from 2.38-2.58μm, which can further grow to 2.93μm during secondary grafting polymerization of styrene. This demonstrates that grafting polymerization proceeds through a typical ATRP procedure with living nature. All of the prepared microspheres have narrow particle size distribution with coefficient of variation around 10%.     

Narrow-disperse Highly Cross-linked “Living” Polymer Microspheres by Two-stage Precipitation Polymerization

Narrow-disperse, surface-functionalized "living" polymer microspheres with uniformly cross-linked structures were prepared by two-stage precipitation copolymerization of styrene and divinylbenzene. The two-stage precipitation polymerization is composed of an initial conventional precipitation polymerization for the nucleation followed by a reverse atom transfer radical polymerization(reverse ATRP) for the controlled polymerization process. The polymerization parameters(including reaction time for the first stage, AIBN amount and monomer loading) have been studied to show significant influences on the morphologies. Moreover, narrower size distribution and an ATRP initiator-functional surface of resulting particles can be obtained by applying reverse ATRP to conventional precipitation polymerization in the second stage. Furthermore, the "livingness" of the resulting polymer microspheres was testified by their surface modification of poly[2-(dimethylamino) ethyl methacrylate](PDMAEMA) brushes via surface-initiated ATRP(SI-ATRP).     

MICRON CORE-SHELL PARTICLES PREPARED BY GRAFTING POLYMERIZATION OF METHYL METHACRYLATE FROM NARROW DISPERSE SURFACE OF CHLOROMETHYLATED POLYDIVINYLBENZENE VIA ATRP

Grafting of poly(methyl methacrylate) from narrow disperse polymer particles by surface-initiated atom transfer radical polymerization (ATRP) was investigated. Polydivinylbenzene (PDVB) particles were prepared by dispersion polymerization with poly(N-vinyl pyrrolidone) (PVP) as the stabilizer. Chloromethylated PDVB was used as initiating core sites for subsequent ATRP of methyl methacrylate with CuBr/bpy as catalyst system. It was found that poly(methyl methacrylate) was grafted not only from the particle surfaces but also from within a thin shell layer, leading to particles size increases from 2.38-3.00μm with a core-shell structure particles. The grafted core-shell particles were characterized with FTIR, SEM, DSC.     

Synthesis of polymeric core–shell particles using surface‐initiated living free‐radical polymerization

An easy and novel approach to the synthesis of functionalized nanostructured polymeric particles is reported. The surfactant‐free emulsion polymerization of methyl methacrylate in the presence of the crosslinking reagent 2‐ethyl‐2‐(hydroxy methyl)‐1,3‐propanediol trimethacrylate was used to in situ crosslink colloid micelles to produce stable, crosslinked polymeric particles (diameter size ～ 100–300 nm). A functionalized methacrylate monomer, 2‐methacryloxyethyl‐2′‐bromoisobutyrate, containing a dormant atom transfer radical polymerization (ATRP) living free‐radical initiator, which is termed an inimer (initiator/monomer), was added to the solution during the polymerization to functionalize the surface of the particles with ATRP initiator groups. The surface‐initiated ATRP of different monomers was then carried out to produce core–shell‐type polymeric nanostructures. This versatile technique can be easily employed for the design of a wide variety of polymeric shells surrounding a crosslinked core while keeping good control over the sizes of the nanostructures. The particles were characterized with scanning electron microscopy, transmission electron microscopy, optical microscopy, dynamic light scattering, and Raman spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1575–1584, 2007     

细乳液聚合法制备磁性复合微球及其表征

在制备超细Fe3O4 磁性粒子的基础上 ,以 3种低分子量聚合物Disperbyk 1 0 6、Disperbyk 1 0 8和Disperbyk 1 1 1为Fe3O4 微粒在单体相中的分散稳定剂 ,采用细乳液聚合法制备了平均粒径为 3 40nm的PS Fe3O4 磁性复合微球 .详细研究了分散剂种类对细乳液聚合制备磁性复合微球的影响 ,并采用XRD、TGA和TEM等手段对磁性复合微球的形态、结构及磁响应性等进行了表征 .实验结果证明分散剂的选择对磁性复合微球的成功制备起着至关重要的作用 ,兼具酸性和碱性功能基的分散剂Disperbyk 1 0 6具有更好的分散和稳定效果 .TEM结果表明 ,所制备的复合微球具有一些缺陷 ,而缺陷处往往是Fe3O4 磁性粒子聚集的地方     

含氨基和环氧基双功能基的聚合物刷磁性微球的制备及对青霉素G酰化酶的固定化

在内部分散超顺磁性Fe3O4纳米粒子的二乙烯苯交联聚丙烯酸微球表面引入原子转移自由基聚合(ATRP)引发剂,引发聚合向微球表面分别引入P(GMMA-r-DMAEMA-r-GMA)、P(GMMA-r-DMAEMA)和P(GMMA-r-GMA)无规共聚物刷(GMMA为甲基丙烯酸甘油单酯,DMAEMA为甲基丙烯酸-N,N-二甲氨基乙酯,GMA为甲基丙烯酸缩水甘油酯),聚合物刷中GMMA链节的作用是使聚合物刷具有亲水性,DMAEMA引入氨基,GMA引入环氧基.研究了青霉素G酰化酶在这些载体上的固定化和其酶活性.结果表明,同时引入环氧基和氨基的P(GMMA-r-DMAEMA-r-GMA)刷磁性微球固定化青霉素G酰化酶的活性和活性收率都最高,其固定化动力学比只含环氧基P(GMMA-r-GMA)刷磁性微球的好.固定化酶比自由酶更耐热,固定化酶的最佳pH值比自由酶的略高,固定化酶重复使用10次后其活性保留70%.     

Synthesis of polynorbornene‐poly(tert‐butyl acrylate) nanoparticles with original morphologies by tandem ROMP and ATRP in microemulsion

Composite latex particles based on homopolymers and graft‐copolymers composed of polynorbornene (PNB) and poly(tert‐butyl acrylate) (PtBA) were synthesized in microemulsion conditions by simultaneous combination of two distinct methods of polymerization: Ring‐opening metathesis polymerization (ROMP) and atom transfer radical polymerization (ATRP). Only one commercial compound (first generation Grubbs catalyst) was used to initiate the ROMP of norbornene (NB) and activate the ATRP of tert‐butyl acrylate (tBA). Well‐defined nanoparticles with hydrodynamic diameters smaller than 50 nm were prepared with original morphologies depending on the monomer compositions, the type of combination (polymer blend or graft‐copolymer), and the conditions of microemulsion polymerizations. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of large-sized monodisperse polystyrene microspheres by dispersion polymerization with dropwise monomer feeding procedure

Highly monodisperse polystyrene (PS) microspheres in the size range of 3.75–7.09 μm were synthesized by dispersion polymerization with dropwise monomer feeding procedure. The morphology, size, and particle size distribution (PSD) of the PS microspheres obtained by different monomer feeding modes, including batch polymerization and various feeding rates, were investigated. The PSD of particles showed a close dependence on feeding rate. The PS microspheres with low coefficient of variation (CV) values all less than 4.8% obtained by the optimum feeding rates revealed better uniformity than those by batch polymerization (CV values all more than 8.2%). According to the time courses of monomer conversion and particle numbers, the effects of monomer feeding modes on the polymerization reaction of the large-sized PS microspheres were clarified. It is found that the dropwise monomer feeding procedure is promising for the synthesis of large-sized monodisperse PS particles in 3.75–7.09 μm.     

Preparation of molecularly imprinted polymer microspheres via atom transfer radical precipitation polymerization

The first combined use of atom transfer radical polymerization (ATRP) and precipitation polymerization in the molecular imprinting field is described. The utilized polymerization technique, namely atom transfer radical precipitation polymerization (ATRPP), provides MIP microspheres with obvious molecular imprinting effects towards the template, fast template binding kinetics and an appreciable selectivity over structurally related compounds. The living chain propagation mechanism in ATRPP results in MIP spherical particles with diameters (number‐average diameter D_n ≈ 3 μm) much larger than those prepared via traditional radical precipitation polymerization (TRPP). In addition, the MIP microspheres prepared via ATRPP have also proven to show significantly higher high‐affinity binding site densities on their surfaces than the MIP generated via TRPP, while the binding association constants K_a and apparent maximum numbers N_max of the high‐affinity sites as well as the specific template bindings are almost the same in the two cases. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3257–3270, 2009     

Reverse Atom Transfer Radical Polymerization of MMA in the Presence of CaCO3/SiO2 Two-Component Composite Particles

Summary: We previously discovered that structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, can be achieved via reverse atom transfer radical polymerization (ATRP), using 2,2′-azo-bis-isobutyronitrile as initiator and Cu^II bromide as catalyst. In the present study, the influence of the mass ratio of CaCO₃/SiO₂ two-component composite particles to methyl methacrylate (MMA) on the rate and behavior of the polymerization was studied in detail. The results illustrate that increasing the mass ratio of CaCO₃/SiO₂ two-component composite particles will decrease the overall rate of polymerization of MMA under standard reverse ATRP conditions. Thermal properties of the obtained well-defined particles were characterized and determined by thermogravimetric analysis (TGA). The results indicate that well-defined PMMA chains grafted on the surface of CaCO₃/SiO₂ particles were only degraded by random chain scission of C C linkages within the PMMA chain, which is different from the degradation of PMMA chains prepared via traditional radical polymerization. This difference is reasonably ascribed to the difference between the end groups of PMMA prepared via reverse ATRP and that via traditional radical polymerization, which has been confirmed by end group analysis measured by ¹H–NMR spectroscopy.