聚甲基丙烯酸甲酯-聚甲基丙烯酸两亲性嵌段共聚物的制备及自组装形态的研究

以2-溴异丁酸乙酯为引发剂, 氯化亚铜/联二吡啶为催化剂, 通过原子转移自由基聚合(ATRP)获得分子链末端含一个α-溴原子的聚甲基丙烯酸甲酯(PMMA-Br), 以此为大分子引发剂引发甲基丙烯酸铅[Pb(MA)₂]单体进行ATRP反应, 制得P[MMA-b-Pb(MA)_2]嵌段共聚物, 将此共聚物在盐酸中进行离子交换即得聚甲基丙烯酸甲酯-聚甲基丙烯酸的两亲性嵌段共聚物[P(MMA-b-MAA)]. 用FTIR, GPC, NMR和SEM方法对共聚物进行了表征.     

富马酸亚铁催化甲基丙烯酸甲酯活性自由基聚合的研究

以富马酸亚铁为催化剂,以2-溴代异丁酸乙酯为引发剂,在90℃下进行甲基丙烯酸甲酯的原子转移自由基本体聚合及溶液聚合.聚合物的数均相对分子质量随单体转化率的增加而线性增加,与时间呈良好线性关系,本体聚合时分子量分布 (PDI) 在1.5～1.7之间,溶液聚合时PDI＜1.5.通过聚合物扩链反应和端基分析,表明富马酸亚铁催化原子转移自由基聚合反应具有活性(可控)聚合的特征.     

富马酸亚铁催化甲基丙烯酸甲酯活性自由基聚合的研究

以畜马酸亚铁为催化剂,以2-溴代异丁酸乙酯为引发剂,在90℃下进行甲基丙烯酸甲酯的原子转移自由基本体聚合及溶液聚合.聚合物的数均相对分子质量随单体转化率的增加而线性增加,与时间呈良好线性关系,本体聚合时分子量分布(PDI)在1.5～1.7之间,溶液聚合时PDI＜1.5.通过聚合物扩链反应和端基分析,表明富马酸亚铁催化原子转移自由基聚合反应具有活性(可控)聚合的特征.     

甲基丙烯酸甲酯的反向原子转移自由基聚合反应 研究

在较低的温度(60℃)和较低的AIBN/CuCl~2/配位剂摩尔比(1:2:4)条件下,用乙腈为溶剂,实现了甲基丙烯酸甲酯(MMA)的反向原子转移自由基聚合(RATRP)。联二吡啶(bpy)为配位剂时,所合成的聚甲基丙烯酸甲酯(PMMA)的分子量分布可低至1.08。用1,10-菲咯啉(phen)代替bpy,MMA的聚合反应速率加快,但其分子量分布稍宽(1.40左右),并进一步研究了bpy和phen作为混合配位剂时对MMA反向ATRP聚合的影响。用RATRP反应所得的带有卤素端基的PMMA作为苯乙烯ATRP的大分子引发剂,成功地合成了具有预期结构的苯乙烯与甲基丙烯酸甲酯嵌段共聚物,大分子引发剂的引发效率接近于1,说明在RATRP过程中由自由基引发剂引发MMA进行一般自由基聚合反应的可能性甚微。     

几种手性原子转移自由基聚合引发剂的合成及其在螺旋选择性聚合中的应用

合成了(S)-2,2'-二(溴甲基)-1,1'-联萘, (S)-2'-甲基-2-溴甲基-1,1'-联萘, α-溴代苯乙酸薄荷酯, N-薄荷基-α-溴代苯乙酰胺和α-溴代苯乙酸胆甾烷醇酯5种旋光的溴代烷并将其用作非手性单体甲基丙烯酸-1-苯基二苯并环庚醇酯 (PDBSMA)的原子转移自由基聚合(ATRP)的手性引发剂. 为了使这些手性引发剂在引发一步生成的初级自由基不发生消旋化, 引发剂中的手性中心都不直接与溴原子相连. 用这5种手性溴代烷做引发剂引发PDBSMA的ATRP所得聚合物可分成四氢呋喃(THF)可溶部分和THF不溶部分. THF可溶部分具有较大的比旋光度. 对THF可溶部分的手性光学性质研究以及比较该部分聚合物和在同样引发条件下得到的甲基丙烯酸甲酯聚合物的比旋光度, 我们得出聚合物大的比旋光度是由聚合物单手性螺旋过量引起的结论, 即合成的手性引发剂对PDBSMA的ATRP均有一定的螺旋选择性, 其中(S)-2,2'-二(溴甲基)-1,1'-联萘、(S)-2'-甲基-2-溴甲基-1,1'-联萘螺旋选择性最好. 引发剂的螺旋诱导能力跟聚合反应的温度有很大关系, 聚合温度上限为70 ℃, 在0～70 ℃之间, 随着温度的升高引发剂的螺旋选择性逐渐增强.     

梳型接枝共聚物的合成（IV）-氯乙酸降冰片烯甲酯引发苯乙烯、甲基丙烯酸甲酯原子转移自由基聚合的研究

首次报道以自制氯乙酸降冰片烯甲酯（NMCA）为引发剂的苯乙烯、甲基丙烯酸 甲酯的原子转移自由基（ATRP）本体聚合。详细考察了单体转化与反应时间、产物 分子量及分子量分布间的关系。研究发现，此引发引发甲基丙烯酸甲酯ATRP反应所 得聚合物的分子量分布较宽（PDI = 1.80～2.45)，且实测值（GPC）与理论值偏差 较大。而NMCA引发的苯乙烯的ATRP反应可得分子量分布较窄（PDI = 1.54)、实验 值（GPC）与理论值基本吻合的产物。单体转化率随反应时间的变化及产物分子量 随单体转化率变化研究证明这一聚合反应具有活性聚合反应特征。产物的NMR分析 证明所合成产物分子中降冰片烯环上双键未参与聚合反应。     

梳型接枝共聚物的合成（IV）-氯乙酸降冰片烯甲酯引发苯乙烯、甲基丙烯酸甲酯原子转移自由基聚合的研究

首次报道以自制氯乙酸降冰片烯甲酯（NMCA）为引发剂的苯乙烯、甲基丙烯酸 甲酯的原子转移自由基（ATRP）本体聚合。详细考察了单体转化与反应时间、产物 分子量及分子量分布间的关系。研究发现,此引发引发甲基丙烯酸甲酯ATRP反应所 得聚合物的分子量分布较宽（PDI = 1.80～2.45),且实测值（GPC）与理论值偏差 较大。而NMCA引发的苯乙烯的ATRP反应可得分子量分布较窄（PDI = 1.54)、实验 值（GPC）与理论值基本吻合的产物。单体转化率随反应时间的变化及产物分子量 随单体转化率变化研究证明这一聚合反应具有活性聚合反应特征。产物的NMR分析 证明所合成产物分子中降冰片烯环上双键未参与聚合反应。     

氢氧根对苯乙烯和甲基丙烯酸甲酯ATRP悬浮共聚的影响

在85℃下,以α-溴异丁酰溴为引发剂、氯化亚铜为催化剂、2,2′-联吡啶(bpy)为配体,研究了氢氧化钠(NaOH)含量对苯乙烯和甲基丙烯酸甲酯的原子转移自由基悬浮共聚合的影响。1H-NMR分析和共聚竞聚率(rSt=0.83,rMMA=0.82)表明St/MMA原子转移悬浮共聚容易形成恒比共聚。ATRP的悬浮聚合表现出较好的可控/活性特征。在试验水相中氢氧根浓度为0至3%的范围内,单体转化率、ln[M]0/[M]和表观反应速率常数kappp都随着氢氧根浓度增大而增大。氢氧根并不影响聚合反应的一级动力学特征,但具有加速St/MMA原子转移悬浮共聚反应的作用。探讨了氢氧根在St/MMA原子转移悬浮共聚反应中的作用机理。     

机理转移法合成聚丁二烯-b-聚(甲基丙烯酸N,N-二甲氨基乙酯)两亲性嵌段共聚物

将活性负离子聚合与原子转移自由基聚合(ATRP)技术相结合,运用机理转移法制备了一种两亲性材料聚丁二烯-b-聚(甲基丙烯酸N,N-二甲氨基乙酯)(PB-b-PDMAEMA)嵌段共聚物.首先通过负离子聚合方法设计合成聚丁二烯,用环氧丙烷封端,2-溴异丁酰溴作酯化剂,合成具有活性端基溴的聚丁二烯大分子引发剂(PB-B r),再用其引发亲水性单体DMAEMA进行原子转移自由基聚合,聚合动力学证实了该聚合反应具有典型的活性/可控自由基聚合的特征.通过差示扫描量热法(DSC)研究嵌段共聚物的微相分离行为.制备的大分子引发剂及两亲性嵌段共聚物经凝胶色谱、红外和核磁表征证实了预定的结构.     

原子转移自由基聚合与高分子构筑

活性聚合反应是目前高分子合成研究最为活跃的领域之一，原子转移自由基聚合反应（ATRP）是实现活性聚合的一种有效途径，可实现多种单体的活性聚合和可控自由基聚合。本文介绍了原子转移自由基聚合反应机理，重点综述了原子转移自由基聚合在高分子合成中的应用。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.