SiO_2表面包覆对Fe_3O_4磁性微球性能的影响

采用化学共沉淀法制备Fe3O4磁性纳米粒子;用柠檬酸钠进行表面修饰得到在水相中稳定分散的Fe3O4溶胶。以Fe3O4磁性纳米粒子为种子,用碱催化正硅酸四乙酯水解、缩合制备了粒径和磁性可控的核壳结构的Fe3O4@SiO2复合微球。通过FT-IR,XRD,TEM,VSM和古埃磁天平对Fe3O4@SiO2复合微球进行表征。研究了SiO2包覆对Fe3O4@SiO2复合微球性能的影响。     

内部结构不对称磁性复合微球的制备及其影响因素探究

内部结构不对称复合微球是指无机粒子在复合微球内部呈现规律性、不对称分布的一类微球.采用细乳液聚合的方法一步合成了平均粒径0.8μm、磁含量为46.67%、比饱和磁化强度为23.20 emu/g的内部结构不对称PSt/Fe3O4磁性复合微球.详细考察了Fe3O4纳米粒子表面修饰剂含量、乳化剂、助乳化剂、超分散剂、细乳化时间等因素对于复合微球形貌的影响,探讨了内部结构不对称复合微球的形成机理.同时通过TEM(透射电子显微镜),FTIR(红外光谱),VSM(振动样品磁强计),TG(热失重分析)以及激光粒度仪等表征手段对微球内部形貌、磁化强度及粒径等进行了表征,确定Fe3O4纳米粒子表面性质是微球呈现内部结构不对称的决定性因素.     

1,1-二苯基乙烯存在下无皂乳液聚合制备磁性复合微球

报道了一种制备磁性复合微球的方法——DPE法.在自由基控制剂1,1-二苯基乙烯(DPE)存在条件下,甲基丙烯酸甲酯(MMA)与丙烯酸(AA)发生无皂乳液聚合,制备能与Fe3O4粒子相螯合的活性短链共聚物,加入Fe3O4粒子把短链共聚物引到其表面,引发其它单体继续在Fe3O4粒子表面聚合,制备磁性复合微球.研究了AA、DPE、引发剂及Fe3O4粒子加入量等对制备磁性复合微球的影响.并在此基础上,对优化后工艺制备的磁性复合微球进行了TEM、TGA及磁响应性表征.结果表明,利用该新的方法制备出了磁含量为20%、比饱和磁化强度为32.2emu/g、平均粒径为265nm且表面不含任何杂质的磁性复合微球.     

Fe_3O_4/P(NaUA-St-BA)核-壳纳米磁性复合粒子的合成与表征

以表面包敷有反应型的表面活性剂NaUA(十一烯酸钠)的Fe3O4磁性胶体粒子为种子,运用无皂乳液聚合方法原位制备出Fe3O4P(NaUAStBA)核壳纳米磁性复合粒子.Fe3O4磁性胶体粒子的粒径为10nm左右.IR和TG结果分析表明,苯乙烯、丙烯酸酯和NaUA在Fe3O4粒子的表面发生了聚合反应,形成P(NaUAStBA);TEM和激光粒度分析仪测试结果显示,Fe3O4P(NaUAStBA)复合粒子具有核壳结构而且粒子分布均匀、平均粒径60nm;TG测试的结果表明,NaUA在Fe3O4粒子的包覆率为13.83%,P(NaUAStBA)共聚物的包覆率71.85%;振动样品磁强仪(VSM)测试的磁滞回线则表明由无皂乳液聚合得到的Fe3O4P(NaUAStBA)复合粒子具有超顺磁性,可避免磁性微球在磁场中的团聚.另外,合成的磁性胶乳可稳定存放数月.     

高Fe_3O_4含量单分散P(St/AA)复合微球的合成与表征

在表面由十一烯酸和油酸共同修饰的Fe3O4磁流体存在下,以苯乙烯(St)和丙烯酸(AA)为共聚单体,用细乳液聚合法,制备了单分散,高Fe3O4含量,且表面带有羧基的超顺磁性高分子复合微球.采用透射电镜(TEM),热重分析(TGA),物性测量系统(PPMS),Zeta电位以及红外光谱等手段对磁性复合微球的各项性能进行表征.结果表明,Fe3O4粒子的表面改性是影响复合微球Fe3O4含量及形貌的关键因素.在优化的实验条件下,可以制得Fe3O4含量高达77wt%,平均粒径为137·9nm,表面羧基密度0·0894mmol/g,比饱和磁化强度为44·7emu/g的单分散超顺磁性高分子复合微球.     

P(St-GMA)/Fe3O4磁性聚合物微球的制备及表征

采用沉淀法制备了Fe3O4纳米粒子, 以苯乙烯(St)、甲基丙烯酸缩水甘油酯(GMA)为聚合单体, 使用分散聚合法制备了P(St-GMA)/Fe3O4磁性聚合物微球. 分析了Fe3O4粒子的形貌和结构. 研究了制备条件对磁性聚合物微球磁含量的影响. 采用FTIR, XRD, TG及TEM等手段对磁性聚合物微球的微观结构及形貌、磁含量等进行了分析表征. 研究结果表明, 制备的磁性聚合物微球粒径均一, 磁含量高达74%.     

Fe3O4/P(NaUA-St-BA)核-壳纳米磁性复合粒子的合成与表征

以表面包敷有反应型的表面活性剂NaUA（十一烯酸钠）的Fe3O4磁性胶体粒子为种子,运用无皂乳液聚合方法原位制备出Fe3O4／P（NaUA-St-BA）核-壳纳米磁性复合粒子,Fe3O4磁性胶体粒子的粒径为10nm左右,IR和TG结果分析表明,苯乙烯、丙烯酸酯和NaUA在Fe3O4粒子的表面发生了聚合反应,形成P（NaUA-St-BA）;TEM和激光粒度分析仪测试结果显示,Fe3O4／P（NaUA-St-BA）复合粒子具有核-壳结构而且粒子分布均匀、平均粒径60nm;TG测试的结果表明,NaUA在Fe3O4粒子的包覆率为13．83％,P（NaUA-St-BA）共聚物的包覆率71．85％;振动样品磁强仪（VSM）测试的磁滞回线则表明由无皂乳液聚合得到的Fe3O4／P（NaUA-St-BA）复合粒子具有超顺磁性,可避免磁性微球在磁场中的团聚。另外,合成的磁性胶乳可稳定存放数月。     

控制自由基聚合制备Fe_3O_4/SiO_2/P(AA-MMA-St)磁性复合微球

用原硅酸乙酯对Fe3O4纳米粒子进行表面改性得到Fe3O4/SiO2磁流体.在Fe3O4/SiO2磁流体存在下,以1,1-二苯基乙烯(DPE)为自由基聚合控制剂,利用乳液聚合法制备了Fe3O4/SiO2/P(AA-MMA-St)核-壳磁性复合微球.用红外光谱(FTIR)、振动样品磁强计(VSM)、透射电镜(TEM)、X光电子能谱(XPS)、热重分析(TGA)、示差扫描量热仪(DSC)对所制备的磁流体、磁性高分子复合微球的结构、形态、性能进行了表征.研究发现,原硅酸乙酯水解后能在Fe3O4表面形成硅膜保护层从而避免Fe3O4的酸蚀,使Fe3O4/SiO2/P(AA-MMA-St)复合微球的比饱和磁化强度比同样条件下制备的Fe3O4/P(AA-MMA-St)微球提高了28%;DPE能有效控制自由基在Fe3O4/SiO2磁流体表面均匀地引发单体聚合,得到平均粒径为422 nm,无机粒子含量为40%,比饱和磁化强度为34.850 emu/g,表面羧基含量为0.176 mmol/g的磁性复合微球.     

高Fe3O4含量微米尺寸磁性复合微球的合成及其在化学发光免疫检测中应用初探

采用种子乳液聚合方法制得了微米尺度的高磁性物质含量的磁性复合微球.聚合体系中,以0.7～0.8 μm的Fe3O4磁性聚集体细乳液作为种子,将苯乙烯,二乙烯基苯作为聚合单体加入到磁性聚集体细乳液中,对Fe3O4磁性聚集体进行溶胀后进行聚合.研究了聚合过程中,溶胀时间对复合微球形貌和磁性物质含量的影响,获得系列形貌微球.通过透射电镜(TEM)、热重分析(TGA)、红外分析(FTIR)、振动样品磁强计(VSM)等表征手段对所制备的磁性聚合物微球进行分析表征.结果显示,所得到的磁性聚合物微球粒度为0.7～1 μm,尺寸分布较均一,具有超顺磁性,磁性物质含量为29 wt%～57 wt%.然后又通过丙烯酸和苯乙烯共聚对微球表面羧基功能化后,得到了表面羧基密度为0.92 mmol/g的微球,再将所制备的微球与生物分子偶联后(以hCG作为模式待检分子),在化学发光免疫检测上进行了初步的应用,取得到了较好的应用结果.     

具有核壳结构磁性复合微球的制备与表征

采用两步法制备了具有核壳结构的Fe3O4/P(MMA/DVB)(core)-P(St/GMA/DVB)(shell)磁性复合微球.首先,用改进的细乳液聚合制备了Fe3O4/P(MMA/DVB)微球;然后,加入总量不同的苯乙烯(St)、甲基丙烯酸缩水甘油酯(GMA)和二乙烯基苯(DVB),通过种子乳液聚合,制备了不同磁含量的核壳结构的磁性复合微球.分别用X-射线衍射(XRD)、高倍透射电镜(HR-TEM)、热重分析(TGA)、振动样品磁力计(VSM)等手段对磁性微球的性能进行了表征.实验结果表明,Fe3O4/P(MMA/DVB)微球的磁含量为84 wt%;通过改变加入壳层单体的量,核壳复合微球的磁含量可控在20 wt%~76 wt%之间.该微球具有超顺磁性,相应的饱和磁化强度为12~50Am2/kg.     

A facile route to hollow superparamagnetic magnetite/polystyrene nanocomposite microspheres via inverse miniemulsion polymerization

In this article, we report a facile route to the preparation of hollow superparamagnetic magnetite/polystyrene nanocomposite microspheres via inverse miniemulsion polymerization at room temperature and under ambient pressure. Water droplets act as a soft template for the formation of hollow structure. Meanwhile, the existence of amphipathic magnetite nanoparticles (MPs) which can assemble at the interface of W/O is favorable to the interfacial polymerization of styrene, ensuring the formation of hollow nanocomposite microspheres. The final products were thoroughly characterized by X‐ray powder diffraction (XRD), fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), field‐emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), and X‐ray photoelectron spectroscopy (XPS), which showed the formation of hollow magnetite/polystyrene nanocomposite microspheres. Magnetic hysteresis loop measurements revealed that both MPs and hollow nanocomposite microspheres displayed superparamagnetism. The effects of the content of H₂O, sorbitan monooleate (Span 80) and styrene and the dose rate on the morphology of nanocomposite microspheres were studied. Furthermore, the mechanism of the formation of the hollow magnetic microspheres was also discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3900–3910, 2008     

可控制自由基聚合DPE法制备P(AA-MMA-ST)/Fe3O4磁性复合微球

在制备超细Fe₃O₄磁性粒子的基础上, 利用可控制自由基聚合DPE法制备出平均粒径为265 nm的P(AA-MMA-ST)/Fe₃O₄磁性复合微球. 采用XRD, TGA, FTIR等手段对所制备的磁性复合微球的形态、结构及磁响应性等进行了表征, 结果表明用DPE法制备出的磁性复合微球磁含量较高, 粒径比较均匀.     

A novel preparation of surface-modified paramagnetic magnetite/polystyrene nanocomposite microspheres by radiation-induced miniemulsion polymerization

A novel and facile approach to the preparation of paramagnetic magnetite/polystyrene nanocomposite microspheres by 60Co gamma-ray radiation-induced miniemulsion polymerization is reported. First, we modified the magnetite nanoparticles (MPs) with a Y-shaped surfactant: 12-hexanoyloxy-9-octadecenoic acid (HOA). Nanocomposite microspheres consisting of polystyrene-iron oxide nanoparticles then were prepared by the radiation-induced miniemulsion polymerization of styrene in the presence of HOA-modified MPs using HOA as stabilizer. The final products were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field-emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The effects of the dose rate, the amounts of added hexadecane (HD) and MPs, and the morphology of the final products were studied. We have also studied the polymerization kinetics to prove the miniemulsion polymerization mechanism of the nanocomposite microspheres.     

Development of high magnetization Fe3O4/polystyrene/silica nanospheres via combined miniemulsion/emulsion polymerization

Monodispersed, hydrophilic, superparamagnetic magnetic nanospheres with a high fraction of magnetite were synthesized by combining modified miniemulsion/emulsion polymerization and sol-gel technique for the first time. The surface of the nanospheres was coated by a silica layer with controlled thickness. Transmission electron microscopy experimental results showed well-proportioned, equal-sized, magnetite/polystyrene (Fe3O4/PS) nanospheres with a thin silica shell. Based on the TGA data, the fraction of magnetite in the Fe3O4/PS nanospheres core was estimated to be 80 wt %. Magnetization measurements indicated that the superparamagnetic nature of the nanospheres had high saturation magnetization of 40 emu/g at 300 K. The procedures of the novel synthesis are described in detail. Also discussed are the mechanisms of the novel combined miniemulsion/emulsion polymerization processes.     

Anionic surfactant for silica-coated polystyrene composite microspheres prepared with miniemulsion polymerization

Raspberry-like composite microspheres with polystyrene (PS) cores and silica shell were prepared through miniemulsion polymerization by using the anionic sodium dodecyl sulfate (SDS) as a surfactant and 1-vinylimidazole (1-VID) as an auxiliary monomer. The strong acid–base interaction between acidic hydroxyl groups of silica surfaces and basic amino groups of 1-VID promote the formation of long-term stable PS/SiO₂ nanocomposite microspheres. Transmission electron microscopy TEM studies indicated that the acid–base interaction between silica nanoparticles and auxiliary monomer was strong enough for the formation of colloidally stable composite microspheres, which have raspberry-like morphology. Influences of several synthetic parameters, such as initial silica amount, the amount of auxiliary monomer 1-VID, and SDS concentration on the polymerization stability, diameters, and morphology of the composite microspheres were studied. A tentative mechanism of the formation of nanocomposite particles was proposed.     

Self-stabilized magnetic polymeric composite nanoparticles by emulsifier-free miniemulsion polymerization

Self-stabilized magnetic polymeric composite nanoparticles (SS-MPCPs) were prepared by emulsifier-free miniemulsion polymerization using styrene (St) as a monomer, sodium p-styrenesulfonate (NaSS) as an ionic comonomer, hexadecane (HD) as a hydrophobe, and 2,2'-azodiisobutyronitrile (AIBN) as an initiator in the presence of hydrophobic magnetite particles. The hydrophobic magnetite particles with an average size of about 10 nm were prepared by the acidification of the water-based magnetite ferrofluid, previously synthesized by a chemical coprecipitation method. Some colloidal features of the synthesized SS-MPCPs were analyzed. The morphology and the particle size distributions (PSDs) of the SS-MPCPs were observed and analyzed by transmission electron microscopy (TEM). The surface charge density was determined by conductometric titration. The surface hairy layer and the colloidal stability of SS-MPCPs against different electrolytes were determined by photon correlation spectroscopy (PCS). The average Fe3O4 content of SS-MPCPs was determined by thermogravimetric analysis (TGA). Vibrating sample magnetometry (VSM) was used to analyze the magnetic properties of the SS-MPCPs under dry conditions. The results show that the encapsulation of magnetite is successful and the distribution of magnetite particles inside SS-MPCPs is mainly in the core of the particles. The best SS-MPCPs prepared had a relatively narrow PSD, exhibited superparamagnetism, and possessed some magnetic response.     

无机-高分子磁性复合粒子的制备与表征

详细地研究了乳化剂用量对种子乳液聚合反应的影响,并成功地制备出粒径约300nm的苯乙烯/丙烯酸共聚小球。另外,还报道使用化学共沉淀法使无机粒子与高分子球复合,制备出高分子球为核,无机粒子为壳层的磁性复合粒子,使用XRD、TEM等手段对此复合粒子进行了表征。同时,进一步研究了这种复合粒子悬浮液的悬浮性能以及粘度随磁场的变化情况。     

Facile method to prepare monodispersed Ag/polystyrene composite microspheres and their properties

This article presents a facile method to prepare silver/polystyrene composite microspheres. In this approach, monodispersed polystyrene (PS) particles were synthesized with carboxyl acid groups on the surfaces of the PS particles via dispersion polymerization at first. With the addition of [Ag(NH₃)₂]⁺ to the PS dispersion, [Ag(NH₃)₂]⁺ was absorbed to the surfaces of the PS particles, and then by heating the system, [Ag(NH₃)₂]⁺ complex ions were reduced to silver to form the Ag/PS composite microspheres. In the synthesis of PS dispersion, PVP was used as dispersant to stabilize the PS particles, it also acted as reducing agent in the reduction of [Ag(NH₃)₂]⁺ complex ions to silver, so no additional reducing agent was needed. The resulting composite microspheres were characterized by TEM, SEM, XPS, and XRD. The catalytic properties and surface‐enhance Raman scattering (SERS) was studied as well. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4547–4554, 2009