PEG大分子单体的合成及纳米级微球的制备

以端基反应法合成苯乙烯封端的聚乙二醇（PEG）大分子单体,用凝胶色谱和核磁共振表征它们的相对分子量和末端官能度,发现得到的大分单体的末端有较高的官能度,使该大分子单体与苯乙烯进行接枝共聚,将得到的产物逐步滴加到各种比例的甲醇－水的混合溶剂中,实验发现,接枝共聚物浓度,共聚物中PEG的含量和混合溶剂的比例对纳米微球的形成与聚集形态有明显的影响,X－射线能谱研究表明,微球表面为亲水性PEO,核为疏水的聚苯乙烯,即形成的聚集物为核－壳复合结构的纳米微球。     

聚丙烯酰胺/聚L-谷氨酸苄酯接枝共聚物的合成及其胶束制备

以聚丙烯酰胺(PAM)为大分子引发剂, 采用开环聚合方法, 在N,N-二甲基甲酰胺(DMF)中引发L-谷氨酸苄酯环内酸酐(BLG-NCA)聚合合成了两亲性聚丙烯酰胺/聚L-谷氨酸苄酯接枝共聚物(PAM-g-BLG), 采用IR, 1H NMR和GPC方法对共聚物结构进行了表征; 用芘作荧光探针, 研究了共聚物胶束的形成及其临界胶束浓度(cmc), 利用动态光散射(DLS)和透射电镜(TEM)研究了胶束的粒径分布和形态. 结果表明, PAM能够引发BLG-NCA开环聚合得到接枝共聚物, 在一定条件下接枝共聚物能够形成球形的稳定胶束, cmc值和胶束粒径随着共聚物中疏水性聚L-谷氨酸苄酯(PBLG)链段含量的增加而减小.     

N-异丙基丙烯酰胺/丙烯酸胆甾醇酯共聚物研究

合成和表征了N 异丙基丙烯酰胺 (NIPAM)与丙烯酸胆甾醇酯 (CHA)的共聚物 .利用表面张力和荧光探针法研究了共聚物水溶液的表面活性性能 ,确定了其临界胶束浓度 (CMC) .利用浊度法和荧光探针法测定了共聚物的最低临界溶液温度 (LCST) .研究发现 ,在聚N 异丙基丙烯酰胺 (PNIPAM)分子链中引入疏水结构单元CHA会使其LCST下降 ;且随着共聚物中CHA含量的增加 ,LCST下降幅度增加 .在PNIPAM链段中引入少量的CHA就会使其表现出明显的两亲性 ,共聚物在水中能形成有壳核结构的稳定胶束 .通过将疏水化合物胆甾醇作为模拟药物包埋在胶束的疏水核中的研究 ,证实所得的胶束能包埋疏水药物 ,且随着包埋胆甾醇含量的增加 ,胶束平均粒径增大 .     

聚异戊二烯-丝胶接枝共聚物的合成与性能研究

以异丙苯过氧化氢和四乙烯五胺为氧化还原对引发剂,通过乳液聚合合成了聚异戊二烯接枝丝胶乳液(PL-g-SS),其结构和性能经NMR,TEM及激光粒度分析表征.结果表明:丝胶成功地接枝到聚异戊二烯上;PL-g-SS双亲纳米微球具有明显的PL为核,SS为壳的核壳结构,平均粒径48nm,且粒径分布较为均匀.采用杂凝聚法将PL-...     

无规-类接枝共聚物自组装制备交联纳米微球

无规-类接枝共聚物(SFG)由大分子单体-己内酯改性丙烯酸酯(FA)、亲油性单体苯乙烯和甲基丙烯酸缩水甘油酯(GMA)共聚所得，SFG与聚苯乙烯在甲醇溶液中进行自组装，形成核壳结构纳米胶束，进一步对PGMA壳进行化学交联。最终得到具有核壳结构的纳米微球。动态激光光散射和透射电子显微镜表征结果显示SFG自组装形成了窄分布的纳米微球，微球粒径在100～200nm之间。     

烷基链封端的两亲性超支化聚缩水甘油的合成及自组装

通过阳离子开环聚合和端基改性的方法合成了以亲水性超支化聚缩水甘油为核和疏水性十六烷基链为臂的两亲性超支化多臂共聚物(HPG-g-C16),研究了十六烷基疏水臂的接枝率对该两亲性聚合物在溶剂中自组装行为的影响.结果表明:接枝率45%以上的HPG-g-C16在四氢呋喃(THF)中以单分子胶束的形式存在,在THF与水的混合溶剂中会自组装形成尺寸为1～10 μm的巨型囊泡,而接枝率为15% 的HPG-g-C16能直接在水中自组装形成球形胶束.     

聚己内酯接枝淀粉纳米晶的制备

通过异氰酸酯与端羟基聚己内酯反应制备端异氰酸酯基预聚体,再接枝到淀粉纳米晶表面,制备了端基分子量可控的聚己内酯接枝淀粉纳米晶。分别用FTIR和1H NMR对所制备的聚己内酯接枝淀粉纳米晶进行表征,结果表明,有少量聚己内酯接枝到淀粉纳米晶表面。XRD结果表明,接枝了少量聚己内酯后的淀粉纳米晶的晶型和结晶度与未接枝的淀粉纳米晶基本一致。聚己内酯接枝淀粉纳米晶的熔融温度由115℃左右提高到122℃左右,并且温度范围变宽。浸润性实验表明,聚己内酯接枝淀粉纳米晶与水不浸润,其表面已具有疏水性。聚己内酯仅接枝在淀粉纳米晶的表面,改善了淀粉纳米晶表面的疏水性能和与聚酯类聚合物的界面相容性。聚己内酯接枝淀粉纳米晶有望用于可降解聚酯类高分子材料,如聚乳酸(PLA)、聚己内酯(PCL)、聚丁二酸丁二醇酯(PBS)等,改善其力学性能和生物降解性能等。     

酶促缩聚和原子转移自由基聚合法合成AB型两亲性嵌段共聚物

Novozyme-435催化10-羟基癸酸进行自缩聚反应得到线性聚酯, 端基分别是羟基(—OH)和羧基(—COOH), 在三乙胺催化下, 分别用α-溴代丙酰溴和三甲基氯硅烷(TMSCL)进行端基官能化生成一个单官能度的大分子引发剂, 在CuCl/2,2'-联吡啶(bpy)催化体系中, 引发甲基丙烯酸环氧丙酯(GMA)的原子转移自由基反应(ATRP), 得到聚(10-羟基癸酸酯)/聚甲基丙烯酸环氧丙酯(PHDA-b-PGMA) AB 型两亲性嵌段共聚物, 其结构及分子量(分布)通过核磁共振和凝胶渗透色谱(GPC)确证. 此AB型两亲性嵌段共聚物在水溶液中能自组装形成纳米粒子, 用原子力显微镜(AFM)观察粒子的形状和大小.     

基于糖基化反应及自组装法制备大豆分离蛋白-可溶性大豆多糖核壳结构纳米凝胶

结合大分子拥挤环境下的糖基化反应与自组装两步法,制备了安全而新型的具有核壳结构的纳米凝胶.首先,通过水相体系中的Maillard反应使亲水性大豆多糖(SSPS)共价连接到大豆分离蛋白(SPI)上形成两亲性嵌段共聚物;然后,在疏水聚集及静电吸引作用力的驱动下诱导接枝共聚物自组装形成SPI-SSPS纳米凝胶.原子力显微镜与透射电子显微镜分析表明,SPI-SSPS纳米凝胶为分布均匀、具有核壳结构的球形粒子,以亲水性的SPI为壳,以交联的SSPS为核;利用圆二色光谱法与荧光光谱法表征了SPI-SSPS纳米凝胶的结构,结果表明,SPI-SSPS纳米凝胶中蛋白的三级结构发生改变,疏水基团暴露于蛋白表面使纳米凝胶内部形成疏水微区,有利于荷载疏水性药物;稳定性实验结果表明,所制备的SPI-SSPS纳米凝胶具有环境稳定性,在一定的pH值与生理离子强度范围内粒子基本不变,于4℃能稳定储藏120 d以上.因此,SPI-SSPS纳米凝胶在生物医药领域具有广阔的应用前景.     

聚苯乙烯/Ag核壳结构纳米微粒的制备及表征

用种子乳液聚合法合成了聚苯乙烯（PS）/Ag复合纳米粒子,进一步利用分步聚合技术实现了聚甲基丙烯酸甲酯(PMMA)在微球表面功能化,分别用TEM、XRD、TG-DTA及FT-IR对其结构和形貌进行了表征,并考察了其摩擦学性能.结果表明,在所选择的实验条件下,合成了以Ag纳米微粒为核,PS、PMMA为壳层的核壳结构复合纳米微球,其中Ag纳米核平均粒径约12 nm,复合微球粒径约25 nm,颗粒较均匀并且在有机溶剂中有良好的分散性,作为润滑油添加剂,具有良好的抗磨性能.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.