CuCl/菲咯啉/甲基咪唑催化甲醇/乙醇氧化羰化一步合成碳酸甲乙酯

 研究了CuCl与含氮杂环化合物配体1, 10-菲咯啉(phen)和N-甲基咪唑(NMI)形成的配合物催化剂对甲醇/乙醇氧化羰化一步合成碳酸甲乙酯(MEC)反应的催化活性. 讨论了配体的配比、甲醇和乙醇的相对用量、温度及压力等因素对甲醇和乙醇的转化率及MEC产率的影响. 结果表明,CuCl/phen/NMI原位配合物催化剂对氧化羰化一步合成MEC反应具有较高的催化活性. 配体phen及NMI对反应产物的选择性有明显的调变作用,甲醇和乙醇的配比对产物分布有很大的影响. 在V(MeOH)/V(EtOH)=0.25,c(CuCl)=0.20 mol/L,n(CuCl)∶n(NMI)∶n(phen)=1∶1.25∶1.25,p=2.40 MPa,θ=120 ℃的条件下反应2 h,甲醇的转化率为44.3%,乙醇的转化率为22.3%,MEC的产率为10.4%.     

酯交换法合成碳酸甲乙酯

以碳酸钾为催化剂,在一定温度下乙醇和碳酸二甲酯进行酯交换反应合成了碳酸甲乙酯。系统地研究了反应物配比、催化剂用量和反应时间等因素对反应的影响,讨论了产物分离的工艺条件。当碳酸二甲酯用量为528mmol,n(碳酸二甲酯)：n(乙醇)=4：1,1K2CO3的摩尔百分用量为0．015％,反应7h,乙醇的转化率为86．9％,碳酸甲乙酯的产率为86．5％,选择性为99．7％。同时,产物的分离简捷。     

CuCl／OIH的合成、表征及其甲醇氧化羰化催化性能研究

合成了有机无机杂化材料负载的CuCl/席夫碱配合物催化剂CuCl/OIH,考察了制备条件对OIH载体及其合成中间产物的影响。采用FTIR、NMR、EA、TGA对有机无机杂化材料及催化剂进行了表征。将负载催化剂CuCl/OIH用于甲醇氧化羰化合成碳酸二甲酯反应,结果表明,负载催化剂CuCl/OIH与CuCl催化剂相比,碳酸二甲酯(DMC)产率提高了25%,负载催化剂循环使用四次后铜流失率仅为2.3wt%。     

Cu(phen)Cl_2催化甲醇氧化羰基化合成碳酸二甲酯

以CuCl2和邻菲啰啉(phen)为原料,在甲醇和乙醇混合溶剂中制备了Cu(phen)Cl2,采用傅里叶红外光谱、热重分析和H2程序升温还原对其进行了表征,并研究了其在甲醇氧化羰基化合成碳酸二甲酯(DMC)反应中的催化性能.结果表明,Cu(phen)Cl2不仅具有较高的热稳定性,而且因phen与Cu(Ⅱ)间的σ-π配位作用而具有较高的催化活性.在催化剂浓度0.011mol/L,反应温度150℃,反应压力4.0MPa和p(CO)/p(O2)=19的条件下,生成DMC的转化数(TON)可达51.5.研究还发现,反应存在诱导期,且TON随温度呈"M"形变化,据此提出了新的羰氧化反应机理.     

乙醇在CuCl/Schiff碱上催化氧化羰化合成碳酸二乙酯

CuCl/Schiff碱催化剂;乙醇在CuCl/Schiff碱上催化氧化羰化合成碳酸二乙酯     

Pd(PPh3)2Cl2CuCl2/AC催化乙醇氧化羰化合成碳酸二乙酯

采用浸渍法制备了乙醇直接气相氧化羰化合成碳酸二乙酯的负载型催化剂，并在连续流动固定床反应装置上评价了催化剂的反应活性，考察了催化剂活性组分、载体、活性组分负载量等因素对催化反应活性的影响。结果表明，活性炭是较好的载体，CuCl2是较好的铜盐前驱体，添加了Pd(PPh3)2Cl2的CuCl2/AC催化剂活性更高。当Cu负载量为9.0%，Pd负载量为0.5%时，催化剂的活性较好。在优化的催化剂制备条件下，乙醇的转化率超过30%，碳酸二乙酯（DEC）的选择性达到95%。     

NaHSO4·H2O催化合成苯甲酸甲酯

以NaHSO4*H2O催化苯甲酸与甲醇的酯化反应,合成了苯甲酸甲酯.研究结果表明,NaHSO4*H2O具有较高的催化活性.考察了苯甲酸/甲醇摩尔比、催化剂用量及反应时间对酯产率的影响.在优化反应条件[n(苯甲酸)∶n(甲醇)∶n(NaHSO4*H2O)=1∶2∶0.29,回流8h]下,苯甲酸甲酯产率达85.3%.     

烷氧基化法一步合成乙二醇乙醚乙酸酯的反应研究

采用具备酸碱双活性位的复合金属氧化物固体催化剂,催化乙酸乙酯(EA)、环氧乙烷(EO)的羧酸酯乙氧基化反应,合成乙酸乙二醇单乙醚酯(CAC)。探索了铝镁锆、铝锌锆等7种不同类型的三金属复合氧化物对EA乙氧基化反应的影响,并研究了EA乙氧基化反应中原料配比、反应温度、催化剂用量等对EO转化率、CAC产率的影响。实验结果表明,铝镁锆复合金属氧化物催化剂具有较高的催化活性,在EA∶EO原料摩尔比为4∶1、反应温度120℃、催化剂用量为1.5(wt)%时,EO转化率为88.3%,CAC产率为43.5%,乙酸二(三)乙二醇单乙醚酯(DCAC,TCAC)产率分别为26.7%和11.4%。     

烷氧基化法一步合成乙酸乙二醇单乙醚酯的反应研究

采用具备酸碱双活性位的复合金属氧化物固体催化剂,催化乙酸乙酯(EA)、环氧乙烷(EO)的羧酸酯乙氧基化反应,合成乙酸乙二醇单乙醚酯(CAC)。探索了铝镁锆、铝锌锆等7种不同类型的三金属复合氧化物对EA乙氧基化反应的影响,并研究了EA乙氧基化反应中原料配比、反应温度、催化剂用量等对EO转化率、CAC产率的影响。实验结果表明,铝镁锆复合金属氧化物催化剂具有较高的催化活性,在EA∶EO原料摩尔比为4∶1、反应温度120℃、催化剂用量为1.5(wt)%时,EO转化率为88.3%,CAC产率为43.5%,乙酸二(三)乙二醇单乙醚酯(DCAC,TCAC)产率分别为26.7%和11.4%。     

咪唑类化合物-CuCl络合催化剂在甲醇氧化羰基化反应中的催化性能

研究了咪唑及其衍生物配合CuCl对甲醇液相氧化羰化合成碳酸二甲酯的催化性能。筛选出溶解性好、腐蚀性小且催化活性高的多功能助催剂。实验结果表明，反应体系中加入N-甲基咪唑后，CuCl可以完全溶解。当催化剂的浓度为0.2 mol/L, N-甲基咪唑与CuCl的量为4∶1，反应温度为120 ℃，反应压力为2.40 MPa，CO与O2的进气比2∶1，反应3 h的条件下甲醇的摩尔转化率为15.4%，选择性为98%以上。从腐蚀性试验结果看，50 ℃时，加入N-甲基咪唑化合物后，Q235钢在CuCl/CH3OH/H2O/CO/O2体系中的腐蚀速率为0.22mm/a，缓蚀效率为94.5%。动力学研究表明，反应近似为一级，加入N-甲基咪唑后，反应速率常数为0.15 min－1。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.