Al3+掺杂对花状氧化锌微结构形貌和气敏性能的影响

利用Zn(NO3)2.6H2O、Al(NO3)3和(CH2)6N4为反应物,PEG400为表面活性剂,通过共沉淀法制备了Al3+掺杂的花状氧化锌纳米棒结构。Al3+掺杂会调控所得氧化物的微结构,提高材料的气敏性能。在350℃工作温度下,掺杂0.3wt%Al3+的花状氧化锌微结构对0.200mL.L-1乙醇的灵敏度达28,响应时间仅12 s。     

石墨烯掺杂纳米氧化锌用于检测三乙胺的增强气敏性能

通过简单研磨实现固相反应的方法制备了纳米氧化锌材料,并利用石墨烯掺杂对氧化锌进行改性,研究了氧化锌材料的气敏性能。利用X射线衍射仪(XRD)、扫描电镜(SEM)、红外光谱仪(IR)对合成的样品进行了结构和形貌表征,考察了原料比例和石墨烯掺杂量对氧化锌形貌和气敏性能的影响。结果表明:合成的氧化锌均为纳米颗粒,随着柠檬酸量增加,得到许多有气孔的氧化锌;石墨烯掺杂后,均得到纳米颗粒的氧化锌;气体检测表明,石墨烯掺杂后的氧化锌,其最佳工作温度由400℃降为280℃,对三乙胺表现出较高的选择性;掺杂3%石墨烯的氧化锌对浓度为0.1 mmol/L三乙胺的响应值(S=Ra/Rg)达到18,是掺杂前的4倍。石墨烯掺杂纳米ZnO可作为检测三乙胺气体的新型传感材料。     

WO3纳米材料的H2S气敏特性

用于检测微量H2S气体的SnO2元件具有相当高的灵敏度，但响应—恢复时间较长，选择性的提高也受限制。本文用化学沉淀法合成了xwt.%SiO2-WO3(x=0，3，5，10，15)纳米粉体，研制出一系列烧结型气敏元件，工作温度为180℃，掺杂量为5％的气敏元件对H2S有很高的灵敏度和选择性，响应—恢复快，而且工作温度较低，有较好的应用价值。     

Pr6O11对SnO2半导体气敏特性的影响

研究了添加Pr_6O_11的SnO_2半导体气敏元件的气敏特性。在丙酮、乙醇、甲烷、一氧化碳等11种气氛中测量结果表明,元件对丙酮、乙醇具有选择性,Pr_6O_(11)的最佳含量为1.0wt％左右。实验还发现,元件的限定工作温度随着Pr_6O_(11)含量的增加而下降,响应时间和恢复时间缩短,灵敏度随被测气体浓度变化的线性范围相应增大。     

手持数显式乙醇测试仪的研制

用半导体氧化物气敏传感器及微控制器８９Ｃ５１研制的手持式数显乙醇测试仪能对气体中的乙醇含量进行现场实时检测。该文从硬件、软件两方面介绍其优化电路和抗干扰技术。该仪器具有灵敏度高、选择性好、抗干扰能力强等特点,可用于交通安全检测、酒厂和食品工厂发酵监控。     

SmFe_(1-y)Sr_yO_3的制备及其气敏性能

用sol-gel法制备SmFe_(1-y)Sr_yO_3(y=0,0.1,0.2,0.3,0.4,0.5,0.6)粉体.XRD图谱表明SmFe_(1-y)Sr_yO_3为正交钙钛矿结构,粉体的晶胞体积和晶粒尺寸均随Sr~(2+)含量的增大而增大.用SmFe_(1-y)Sr_yO_3纳米粉体制备成气敏元件,测试了其对乙醇气体的气敏特性.结果表明,在同等条件下,以SmFe_(0.7)Sr_(0.3)O_3元件对乙醇的气敏性能最优,在工作温度为240℃时对体积分数为1×10~(-4)的乙醇的灵敏度达到26.14,是SmFeO_3元件的10.80倍.SmFe_(0.7)Sr_(0.3)O_3元件同时还表现出较好的选择性、响应-恢复特性与稳定性,工作温度为240℃时的响应时间和恢复时间分别为28s和83s.     

纳米氧化锌的乳液合成、结构表征与气敏性能

利用化学沉淀法、乳液法及微乳液法合成了不同晶粒尺寸的纳米氧化锌气敏材料；用X射线衍射和透射电镜、研究了材料的晶体结构和陶瓷微结构，并利用科西-科西法和德拜-谢乐法计算了材料的平均晶粒度和晶格畸变；和静态配气法测试了材料对乙醇、汽油、氢气、丁烷、六氟化硫的气体灵敏度。实验结果表明：微乳液法和阴离子表面活性剂乳化法合成的氧化锌具有颗粒小，气体灵敏度高和工作温度低的特点。     

Fe2O3—SnO2复合气敏材料的气敏性能研究

本文采用共沉淀方法制备超微粒子原料粉,测试了不同配比材料的气敏灵敏度,并探讨了不同粒度的Fe_2O_3原料与气敏特性之间的关系,提出Fe_2O_3-SnO_2复合气敏材料的气敏机制属体控制与表面控制兼有的混合机制·Fe_2O_3-SnO_2,复合气敏材料,选用CuO掺杂,可制出对乙炔具有高选择性和灵敏度的气敏元件。     

掺镁YFeO3固溶体的电导和气敏性能研究

用化学共沉淀法制备了复合氧化物YFeO3镁掺杂固溶体Y1-xMgxFeO3气敏半导体材料,并对其相组成、电导和气敏性能进行了研究。结果表明：Mg2+在YFeO3的A位固溶范围为0糩]x糩0.8;电导测量显示,该p型固溶材料电导突变温度较纯相YFeO3低100℃以上;900℃下灼烧4h所得的Y0.94Mg0.06FeO3粉料制作的元件在257℃时对乙醇灵敏度最高,对4.5*mol/L乙醇的灵敏度高达44;选择性较好,4.5韒ol/LC2H5OH的灵敏度是45*mol/Lpetrol的4.0倍。     

溶胶-凝胶法制备In-Cd纳米复合氧化物及其气敏性能研究

采用溶胶凝胶法制备了In20rCdln2O4和CdO-Cdln2O4纳米复合氧化物,利用扫描电子显微镜(SEM)和X射线衍射仪(XRD)对复合材料的形貌和结构进行表征,并对其进行了乙醇、丙酮等多种气体的气敏性能测试.结果表明Cdln2O4材料复合h12O3和CdO后显著提高了对丙酮和乙醇气体的灵敏度和选择性.     

沉淀剂对AU/ZnO催化剂CO氧化性能及催化剂结构的影响

在25 C和进料中含水条件下,考察了由Na2CO3,(NH4)2CO3,NaOH和NH4OH等4种沉淀剂制备的Au/ZnO催化剂上CO氧化活性和稳定性.结果表明,沉淀剂影响Au/ZnO催化剂的前体组成、金粒子和ZnO粒子大小、比表面积及CO氧化性能.由NH4OH制备的Au/ZnO催化剂活性和稳定性较差,CO转化率只有15%;由其它3种沉淀剂制备的Au/ZnO催化剂的CO氧化活性和稳定性明显改善,可至少连续反应1 100 h,且保持CO完全氧化,其中Na2CO3是最佳沉淀剂.在反应过程中反应气氛可引起金粒子的聚集及在催化剂表面生成新的碱式碳酸锌物相.催化剂的稳定性与金粒子长大速度和碳酸根累积量有关.     

The behavior of oxygen as a collision-induced dissociation target gas

The unusual and unique ability of O2 as target gas in kV collision-induced dissociations, to enhance a specific fragmentation of a mass selected ion, has been examined in detail. The affected dissociations studied were the loss of CH3* from CH3CH+X (X = OH, CH3, NH2, SH); CH3* and C1* loss from CH3C+(C1)CH3; C2H5* loss from CH3CH2CH+X (X = OH and NH2); H* loss from +CH2OH and +CH2NH2; O loss from 1,2-, 1,3-, and 1,4-C6H4(NO2)2+*; CH3NO+*; C6HsNO2+*; C5H5NO+* (pyridine N-oxide); 3- and 4-CH3C5H4NO+*. A general explanation of the phenomena, which was semiquantitatively tested in the present work, can be summarized as follows: the ion - O2 encounter excites the target molecules to their 3sigma(g)- state which resonantly return this energy to electronic state(s) in the ion. The excited ion now contains a sharp excess of a narrow range of internal energies, thus significantly and only enhancing fragmentations whose activation energies lie within this small energy manifold.     

Dissociative photodetachment dynamics of solvated iodine cluster anions

Photoelectron-photofragment coincidence spectroscopy of I- (CO2), I- (NH3), I- (H2O), I- (C6H5NH2), and I- (C6H5OH) clusters was used to study the dissociative photodetachment (DPD) dynamics at 257 nm. Photodetachment from all five clusters was observed to yield bound neutral clusters as well as the DPD products of the iodine atom and the molecular solvent. Photoelectron images and kinetic energy spectra were recorded in coincidence with both the translational energy released between dissociating neutral products and stable neutral clusters. The variation of the photoelectron angular distributions in the clusters was measured, revealing significant perturbations relative to I- for I- (H2O) and I- (C6H5NH2). Product branching ratios for stable versus dissociative photodetachment and photodetachment to the I(2P(3/2)) and I(2P(1/2)) states are reported. The measurements reveal a dependence of the DPD dynamics on the final spin-orbit state of iodine in the cases of I- (C6H5NH2) and I- (CO2) and a threshold detachment process in I- (C6H5NH2).     

Pd促进ZnO/Al2O3催化乙醇水蒸气重整制氢

采用浸渍法制备了Pd促进ZnO/Al2O3催化剂, 考察了该催化剂作用时, 在水醇摩尔比为3, 常压和450 °C工作条件下乙醇水蒸气重整(SRE)制氢反应性能. 研究结果表明, 在该催化剂体系作用下的SRE反应过程中, H2、CH3CHO为主要产物, 与ZnO/Al2O3催化剂不同, Pd能促使CH3CHO发生C-C键断裂反应, 显著提高C2H5OH转化率及H2选择性, 分别达65%、55%. 还利用BET比表面积、透射电子显微镜(TEM)、热重-差示扫描量热-质谱(TG-DSC-MS)等表征手段考察了催化剂失活以及表面积炭情况, 发现Pd的加入对催化剂总积炭量并无明显影响.     

Metal-catalyzed anaerobic disproportionation of hydroxylamine. Role of diazene and nitroxyl intermediates in the formation of N2, N2O, NO+, and NH3

The catalytic disproportionation of NH(2)OH has been studied in anaerobic aqueous solution, pH 6-9.3, at 25.0 degrees C, with Na(3)[Fe(CN)(5)NH(3)].3H(2)O as a precursor of the catalyst, [Fe(II)(CN)(5)H(2)O](3)(-). The oxidation products are N(2), N(2)O, and NO(+) (bound in the nitroprusside ion, NP), and NH(3) is the reduction product. The yields of N(2)/N(2)O increase with pH and with the concentration of NH(2)OH. Fast regime conditions involve a chain process initiated by the NH(2) radical, generated upon coordination of NH(2)OH to [Fe(II)(CN)(5)H(2)O](3)(-). NH(3) and nitroxyl, HNO, are formed in this fast process, and HNO leads to the production of N(2), N(2)O, and NP. An intermediate absorbing at 440 nm is always observed, whose formation and decay depend on the medium conditions. It was identified by UV-vis, RR, and (15)NMR spectroscopies as the diazene-bound [Fe(II)(CN)(5)N(2)H(2)](3)(-) ion and is formed in a competitive process with the radical path, still under the fast regime. At high pH's or NH(2)OH concentrations, an inhibited regime is reached, with slow production of only N(2) and NH(3). The stable red diazene-bridged [(NC)(5)FeHN=NHFe(CN)(5)](6)(-) ion is formed at an advanced degree of NH(2)OH consumption.     

Templated heptaborate and pentaborate salts of cyclo-alkylammonium cations: structural and thermal properties

The synthesis and characterization of a series of cyclo-alkylammonium pentaborate salts {[cyclo-C(n)H(2n-1)NR(3)][B(5)O(6)(OH)(4)] (R = H, n = 3, 5-7 (1-4); R = Me, n = 6 (5))} are reported. Compounds 1, 2 and 5 have been further characterized by single-crystal XRD studies. Attempted recrystallization of 3 and 4 yielded small crops of the unexpected heptaborate salts, [cyclo-C(6)H(11)NH(3)](2)[B(7)O(9)(OH)(5)]·3H(2)O·B(OH)(3) (6) and [cyclo-C(7)H(13)NH(3)](2)[B(7)O(9)(OH)(5)]·2H(2)O·2B(OH)(3) (7) which were also characterized crystallographically. All compounds show extensive supramolecular H-bonded anionic lattices templated by the cations. H-bond interactions are described in detail. TGA-DSC analysis of the pentaborates 1-5 showed that they thermally decomposed in air at 800 °C to 2.5B(2)O(3), in a 2 step process involving dehydration (<250 °C) and oxidative decomposition (250-600 °C). BET analysis of materials derived from the pentaborates had internal porosities of <1 m(2) g(-1).     

Zn物种对乙烯芳构化反应过程的影响

分别采用离子交换法和物理混合法制备了不同Zn含量的ZSM-5分子筛催化剂,采用X射线衍射、扫描电子显微镜、N2物理吸附、氨程序升温脱附、吡啶红外吸附光谱、紫外-可见光谱和X射线光电子能谱等技术研究了催化剂的结构、表面性质及Zn物种种类,探讨了Zn物种存在状态对乙烯芳构化反应的影响。结果表明,引入到HZSM-5中的Zn物种包括三种状态,即ZnO晶体、存在于分子筛孔道中的ZnO团簇以及Zn和分子筛质子酸中心通过固相反应生成的Zn(OH)+物种;不同的制备方法显著影响Zn物种的分布。比较了制备方法和Zn含量对ZSM-5分子筛催化剂在乙烯芳构化反应中性能的影响,发现Zn(OH)+物种是芳构化的主要活性中心,同时ZnO物种的存在有助于乙烯制芳烃反应的发生。     

Hydrogen bonding interactions of pyridine*+ with water: stepwise solvation of distonic cations

The solvation energies of the pyridine*+ radical cation by 1-4 H2O molecules were determined by equilibrium measurements in a drift cell. The binding energies of the pyridine*+(H2O)n clusters are similar to the binding energies of protonated pyridine-water clusters, (C5H5NH+)(H2O)n, which involve NH+..OH2 bonds and different from those of the solvated benzene radical cation-water clusters, C6H6*+(H2O)n, which involve CHdelta+..OH2 bonds. These relations indicate that the observed pyridine*+ ions have the distonic *C5H4NH+ structures that can form NH+..OH2 bonds. The observed thermochemistry and ab initio calculations show that these bonds are not affected significantly by an unpaired electron at another site of the ion. Similar observations also identify the 2-fluoropyridine*+ distonic ion. The distonic structure is also consistent with the reactivity of pyridine*+ in H atom transfer, intra-cluster proton transfer and deprotonation reactions. The results present the first measured stepwise solvation energies of distonic ions, and demonstrate that cluster thermochemistry can identify distonic structures.     

Synthesis, crystal structure, and solution stability of Keggin-type heteropolytungstates (NH4)6NiII0.5[alpha-FeIIIO4W11O30NiIIO5(OH2)].nH2O, (NH4)7Zn0.5[alpha-ZnO4W11O30ZnO5(OH2)].nH2O, and (NH4)7NiII0.5[alpha-ZnO4W11O30NiIIO5(OH2)].nH2O (n approximately 18)

Reaction of acidified (pH approximately 7) sodium tungstate solutions with transition metal cations (Fe(3+), Ni(2+), Zn(2+), Co(2+)) leads to the formation of transition-metal-disubstituted Keggin-type heteropolytungstates with 3d-metal ions distributed over three different positions. A detailed investigation of the synthesis conditions confirmed that the complexes could equally be obtained using aqueous solutions of either Na(2)WO(4).2H(2)O (sodium monotungstate) at pH approximately 7, Na(6)[W(7)O(24)]. approximately 14H(2)O (sodium paratungstate A), or Na(10)[H(2)W(12)O(42)].27H(2)O (sodium paratungstate B) as starting materials. Three complexes, (NH(4))(6)Ni(II)(0.5)[alpha-Fe(III)O(4)W(11)O(30)Ni(II)O(5)(OH(2))].18H(2)O, (NH(4))(7)Zn(0.5)[alpha-ZnO(4)W(11)O(30) ZnO(5)(OH(2))].18H(2)O, and (NH(4))(7)Ni(II)(0.5)[alpha-ZnO(4)W(11)O(30)Ni(II)O(5)(OH(2))].18H(2)O were isolated in crystalline form. X-ray single-crystal structure analysis revealed that the solid-state structures of the three compounds consist of four main structural fragments, namely [MO(4)W(11)O(30)M'O(5)(OH(2))](n-) (Keggin-type, alpha-isomer) heteropolytungstates, hexaquo metal cations, [M'(OH(2))(6)](2+), ammonium-water cluster ions, [(NH(4)(+))(8)(OH(2))(12)], and additional ammonium cations and water molecules. The 3d metals occupy the central (tetrahedral, M) and the peripheral (octahedral, M') positions of the Keggin anion, as well as cationic sites (M') outside of the polyoxotungstate framework. UV-vis spectroscopy, solution ((1)H, (183)W) and solid-state ((1)H) NMR, and also chemical analysis data provided evidence that the 3d-metal-disubstituted Keggin anions do not exist in solution but are being formed only during the crystallization process. Investigations in the solid state and in solution were completed by ESR, IR, and Raman measurements.     

Photodissociation dynamics of pyridine

Photodissociation of pyridine, 2,6-d2-pyridine, and d5-pyridine at 193 and 248 nm was investigated separately using multimass ion imaging techniques. Six dissociation channels were observed at 193 nm, including C5NH5 --> C5NH4 + H (10%) and five ring opening dissociation channels, C5NH5 --> C4H4 + HCN, C5NH5 --> C3H3 + C2NH2, C5NH5 --> C2H4 +C3NH, C5NH5 --> C4NH2 + CH3 (14%), and C5NH5 --> C2H2 + C3NH3. Extensive H and D atom exchanges of 2,6-d2-pyridine prior to dissociation were observed. Photofragment translational energy distributions and dissociation rates indicate that dissociation occurs in the ground electronic state after internal conversion. The dissociation rate of pyridine excited by 248-nm photons was too slow to be measured, and the upper limit of the dissociation rate was estimated to be 2x10(3) s(-1). Comparisons with potential energies obtained from ab initio calculations and dissociation rates obtained from the Rice-Ramsperger-Kassel-Marcus theory have been made.