介孔分子筛孔中过渡金属的组装及其催化应用

本文对近年来在MCM系列和SBA系列介孔分子筛孔中组装过渡金属催化剂的方法,如一步合成法、接枝法和浸渍法等进行了归纳,并对这些含过渡金属介孔分子筛催化剂在氧化反应、加氢反应、烷基化反应、F-T合成和催化脱硫反应中的应用进展进行了评述,以期对含过渡金属介孔分子筛催化剂的性能有比较全面的认识.     

多孔材料负载金催化剂的制备与应用*

本文综述了微孔材料和介孔材料负载型金催化剂的制备、表征与应用研究的最新进展,从多孔载体的选择（氧化物、微孔分子筛、介孔氧化物、介孔分子筛和介孔碳材料）、金的最新负载方法（沉积-沉淀法、溶胶-凝胶法、原位法/一步法和化学气相沉积法）与表征及其催化性能（一氧化碳低温氧化、氢气/氧气直接合成过氧化氢、直接合成环氧丙烷和有机物的选择性氧化）等方面详尽地评述了微孔材料和介孔材料负载型金催化剂研究概况。同时,提出了多孔材料负载金催化剂存在的一些问题,并展望了其研究和发展的方向。     

钛硅介孔分子筛

综述了钛硅介孔分子筛的合成、表征及其应用研究进展.评述了钛硅介孔分子筛的合成方法与合成条件对分子筛结构性能、钛物种的配位状态和催化性能的影响.介绍了鉴定钛硅介孔分子筛内骨架钛原子的多种波谱学方法以及钛硅介孔分子筛在选择氧化、光催化、酸催化反应中的应用,并指出钛硅介孔分子筛是一种非常有应用前景的环境友好的多相催化剂.     

介孔与介孔主客体材料在催化领域的应用

 综述了近年来介孔分子筛催化材料制备的研究成果及其在催化领域特别是精细化学品合成中的应用. 文章分为两部分,分别讨论了介孔材料本身作为催化剂以及介孔主客体催化材料的应用.     

三头季铵盐表面活性剂导向合成新型立方相介孔二氧化硅

介孔分子筛因具有大而均一的孔道、高比表面积及相对良好的热稳定性而在精细化学品催化剂[1,2 ] 、生物大分子分离 [3] 和功能材料的主体 [4 ] 等领域有十分广阔的应用前景 .自 1 992年 Mobil公司合成 M41 S[5,6 ] 系列介孔材料以来 ,HMS[7] ,MSU[8] 和 SBA[9～ 12 ] 系列以及 FDU- 1 [13] 等不同结构的介孔分子筛材料相继被合成 .立方相介孔分子筛因具有三维网状结构和可通性较高的孔道而在反应中不易堵塞 ,相对于一维孔道结构的六角相 MCM- 41和 SBA- 1 5 ,其应用前途更加广阔 .迄今 ,人们已经合成了 MCM- 48[14～ 16 ]( Ia3d) …     

介孔分子筛的酸性和水热稳定性

介孔分子筛材料在催化、吸附与分离以及化学组装制备先进材料和分子器件等方面具有潜在的应用价值.但是,由于介孔分子筛材料较低的水热稳定性和较弱的酸性,极大地影响了其在催化研究中的广泛应用.本文系统地综述了最近几年在提高介孔分子筛酸性和水热稳定性的研究工作.其中包括:(1)将超酸组份负载于介孔分子筛的孔道中以达到提高介孔分子筛材料的酸强度的目的;(2)通过在合成介孔分子筛的过程中加入无机盐和有机胺等助剂或采用合适的后处理方法以提高介孔分子筛的水热稳定性;(3)通过新型模板剂来合成具有较高水热稳定性的介孔分子筛材料;(4)利用具有沸石分子筛基本结构单元的沸石分子筛导向剂与表面活性剂自组装来合成具有强酸中心和高温水热稳定的介孔分子筛材料.     

具有强酸位的六方和立方介孔硅铝分子筛合成及催化活性比较

六方 MCM- 41和立方 MCM- 48介孔分子筛是长程有序的介孔材料 ,由于其孔壁是无定形结构 ,具有较弱的酸性 ,限制了其应用范围 .若能提高它们的酸强度则可提高其在石油炼制和精细化工中的应用价值 .现已采用多种改进方法来提高其酸强度 [1～ 6 ] ,但所合成的介孔材料均为六方结构 ,而具有立方结构的材料未见文献报道 .本文采用两步晶化合成法 ,用低浓度的表面活性剂合成出具有强酸位的立方介孔分子筛 ( MB48) ,还通过调节溶液的酸碱性合成出六方介孔分子筛 ( MB41 ) ,对样品的结构、酸性和催化性能进行了表征和比较 .1　实验部分1 .1　 β…     

SBA-15介孔分子筛的乙基化修饰

20世纪90年代初，美孚公司的研究者们用烷基季铵盐阳离子表面活性剂作模板剂，在碱性条件下合成出M41S系列介孔分子筛。近几年，合成出了MCM，HMS，MSU、SBA等硅基分子筛系列。由于介孔材料表面有许多端羟基，可用来固定活性基团，使其在吸附、分离、催化和主客体化学等方面具有广泛的潜在应用价值。对介孔材料孔道进行有机改性的无机-有机复合材料的研究正在兴起，本文采用分步合成法，以乙基三乙氧基硅烷为偶联剂，     

水玻璃为原料在开放体系中快速合成介孔材料MCM-41

自从 M41 S系列硅基介孔分子筛被人工合成以来[1,2 ] ,有关分子筛的合成、性能、形成机理、结构和应用等方面的研究报道不断出现[3～ 5] .目前 ,由有机 -无机离子经分子水平的自组装结合而产生介孔材料的合成机理主要归结于在合成过程中表面活性剂的模板效应 ,如液晶模板机理[1,2 ] 、棒状自组装模型[6 ] 、电荷匹配机理[7] 、层状折皱模型[8] 和使用非离子表面活性剂合成介孔材料等效应[9] .本文以水玻璃作为硅源 ,以十六烷基三甲基溴化铵 (CTAB)阳离子表面活性剂为模板剂 ,在温和条件下 ,采用开放体系合成出具有 MCM-4 1结构特点的介…     

微波水热合成Mn-Ti-Al-MCM-41分子筛及其催化双氧水环氧化苯乙烯的性能

采用原位微波水热合成Mn-Ti-Al-MCM-41介孔分子筛,并以双氧水为氧化剂和微波加热,研究了该介孔分子筛在苯乙烯环氧化反应中的催化性能.利用XRD、29SiMAS-NMR、N2吸附、SEM-EDS和HRTEM手段对该材料进行了表征,结果表明它具有典型的六方相介孔结构、高的比表面积以及窄的孔径分布.本实验表明Mn-Ti-Al-MCM-41的新颖合成方法加速了整个合成时间:从几天到几个小时.在催化苯乙烯液相环氧化实验中该材料具有较高的催化活性.而且利用本实验合成的介孔分子筛与传统方法制备的在较大程度上提高了对苯基环氧乙烷的选择性.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.