利用静电界面制备高性能蒙脱石/氢化丁腈橡胶

将甲基丙烯酸(MA)和烷基胺改性蒙脱石(MMT)混合成浆料后, 加入到氢化丁腈(HNBR)橡胶中, 通过热硫化工艺, 制备了MMT/HNBR橡胶复合材料. 采用扫描电子显微镜、 透射电子显微镜、 小角X射线衍射仪、 傅里叶变换红外光谱仪和转矩流变仪研究了MA改性的MMT与橡胶间的界面及分散性, 并对复合材料的各种性能进行分析. 结果表明, 在热硫化过程中, 不仅形成了橡胶的交联网络, 而且也促使MA在橡胶中发生原位聚合. 生成的聚甲基丙烯酸与MMT表面的烷基胺形成离子对, 从而在橡胶和MMT间构筑了强的静电界面. 同时MA在MMT层间发生聚合反应, 提高了MMT在橡胶中的分散性. 动态机械性能和200%应变的应力松弛实验表明, 良好分散的MMT和静电界面有效约束了橡胶分子链在力学拉伸过程中的运动. 与纯橡胶相比, MMT/HNBR橡胶复合材料具有更大的拉伸强度和韧性. 此外, 橡胶复合材料还具有良好的N₂气阻隔性能. 因此, 配制MA/MMT浆料是一种简单方便的MMT改性方法, 制备的MMT/HNBR橡胶复合材料可用于制造具有高强韧性和气体阻隔性要求的橡胶产品.     

甲基丙烯酸镁增强氢化丁腈橡胶的结构与形态和性能

用不同份量的甲基丙烯酸镁(MgMA)作增强剂,过氧化二异丙苯(DCP)作硫化剂,通过混炼和硫化过程的原位聚合制备了氢化丁腈橡胶/聚甲基丙烯酸镁(HNBR/PMgMA)纳米复合材料,用XRD、FTIR1、3C-NMR、SEM、TEM、DMA和交联密度分析等方法研究了其结构、形态和性能,并阐述了MgMA改性HNBR的相关机理.结果表明,MgMA在混炼过程中粒径明显变小,部分达到纳米级.硫化过程中发生原位自由基聚合,并部分接枝到HNBR分子链上,HNBR硫化胶和PMgMA有可能形成接枝互穿聚合物网络(接枝IPN).随着MgMA用量的增加,纳米复合材料硫化胶的定伸应力、拉伸强度、扯断伸长率、撕裂强度和热氧老化性能逐渐提高.当MgMA含量为30份时,体系的拉伸强度和扯断伸长率分别为38.5MPa和545%,并具有优异的热空气老化性能.MgMA能明显增加HNBR复合材料的储能模量,并降低其损耗因子.随着MgMA用量的增加,纳米复合材料硫化胶的总交联密度(Ve)和离子键交联密度(Ve2)增加,而共价键交联密度(Ve1)下降,表明离子键对HNBR/PMgMA纳米复合材料的力学性能起重要作用.     

PVA改性PAMPS-PAM超高力学性能双网络水凝胶的制备

采用紫外光引发聚合制备了聚乙烯醇(PVA)改性的聚(2-丙烯酰胺基-2-甲基丙磺酸)-聚丙烯酰胺(PAMPS-PAM)双网络(DN)水凝胶.测定并比较了PVA改性前后PAMPS-PAM双网络水凝胶的溶胀动力学;通过扫描电子显微镜(SEM)观察了单网络水凝胶的结构;测定PVA改性前后PAMPS-PAM双网络水凝胶的压缩及拉伸性能.结果表明,经PVA改性后的PAMPS-PAM双网络水凝胶有较高的溶胀比;0.82%PVA用量的PAMPS-PAM双网络水凝胶在90%压缩形变率下仍保持完整、最大拉伸应力达到0.5 MPa,大幅提高PAMPS-PAM双网络水凝胶的力学性能.     

氢化丁腈橡胶/聚甲基丙烯酸镁/有机蒙脱土纳米复合材料制备及其耐介质老化性能

采用原位聚合和混炼插层相结合技术制备了氢化丁腈橡胶/聚甲基丙烯酸镁/有机蒙脱土(HNBR/PMgMA/OMT)纳米复合材料,通过XRD,SEM和TEM等测试方法研究了HNBR/PMgMA/OMT纳米复合材料的结构、形态和性能.PMgMA离子簇与未反应完全的MgMA单体形成纳米-微米共存形态结构,PMgMA对HNBR有显著的增强效果,HNBR/PMgMA/OMT纳米复合材料具有良好的加工性能、物理机械性能和耐介质老化性能.TEM结果显示MgMA/OMT并用有助于OMT剥离分散,有机蒙脱土在硫化胶中形成以剥离和插层为主、反插层和未插层共存的微观结构;SEM显示当MgMA/OMT用量为20/10份时能明显改善复合材料的界面结合,此时纳米复合材料的拉伸强度、扯断伸长率和扯断永久变形分别为30.2 MPa,520%和30%;同时具有优异的耐热空气和耐油老化性能,耐热水性能也明显改善,在165℃的热空气、水和油中长期老化14天的老化系数分别达到0.61,0.63和0.84,其耐介质老化性能明显好于炭黑增强HNBR硫化胶及HNBR/PMgMA复合材料.良好的蒙脱土片层分散结构是提高HNBR/PMgMA/OMT纳米复合材料耐介质老化性能的主要原因.     

聚乙二醇对PAMPS/PAM双网络水凝胶性能的影响

采用紫外光引发聚合制备了聚乙二醇(PEG)改性的聚(2-丙烯酰胺-2-甲基丙磺酸)/聚丙烯酰胺(PAMPS/PAM)双网络水凝胶.测定并比较了PEG改性前后双网络水凝胶的溶胀动力学以及单网络水凝胶中丙烯酰胺(AM)的吸收量;用扫描电子显微镜(SEM)观察了单网络水凝胶的结构;测定PEG改性前后双网络水凝胶的压缩及拉伸性能.结果表明,经PEG改性后的双网络水凝胶有较高的溶胀比;改性后单网络水凝胶更易吸收AM;改性后双网络水凝胶压缩形变率达到90%以上、拉伸形变率是未改性双网络水凝胶的2倍.     

甲基丙烯酸烷基酯为疏水成分的溶剂改性pH-敏感凝胶的溶胀行为

以不同酯烷基链长的甲基丙烯酸烷基酯为疏水成分，甲基丙烯酸二乙氨基乙酯(DEA)为可离子化单体，及以二甲基丙烯酸乙二醇酯(EGDM)或二乙烯苯(DVB)为交联剂，合成了数个系列甲苯改性的不同交联度的疏水阳离子凝胶，研究了这些凝胶以pH-敏感溶胀为主的容胀行为．发现以甲基丙烯酸正丁酶(BMA)，EGDM及DEA合成的改性凝胶，与以苯乙烯(St)，DVB及DEA合成的溶剂改性凝胶具有十分相似的平衡溶胀和动力学溶胀性质．研究结果为增加疏水阳离子凝胶的载药种类，拓宽由pH改变而触发释药的控释体系的应用范围提供了新的途径．     

不同氢化度氢化丁腈橡胶的结构表征与分子模拟

通过核磁共振波谱(¹H NMR)、 红外光谱(IR)及热分析等方法研究了不同氢化度氢化丁腈橡胶(HNBR)分子结构之间的差异, 结果表明, 在丁腈橡胶(NBR)加氢过程中, 聚丁二烯上的乙烯基加氢速率最快, 其次是反式1,4结构, 顺式1,4结构的加氢速率最慢, 而腈基基本不发生氢化反应. 采用核磁共振谱法对不同氢化度HNBR中不同链段的含量进行定量分析, 依据此结果建模并进行分子模拟计算, 得到不同氢化丁腈橡胶的密度、 内聚能密度(CED)和玻璃化转变温度(T_g)等参数, 模拟值与实验结果吻合. 实验结果表明, 随着氢化度的增加, HNBR的热氧化稳定性逐渐增加, 这主要是由于氢化度增加后分子链中双键含量逐渐减少而CED增加的缘故. 分子模拟可以有效地计算出多种结构参数, 为共聚橡胶材料的制备与加工提供基础数据及理论指导.     

ARGET ATRP 与ROP 结合制备pH 响应两亲性聚合物分子刷及其自组装研究

结合电子转移活化剂再生-原子转移自由基聚合(ARGET ATRP)和开环聚合(ROP)法合成了一种具有无规疏水/ pH 响应结构的两亲性聚合物分子刷聚(甲基丙烯酸聚丙交酯酯-co-甲基丙烯酸)-b-聚甲基丙烯酸单甲氧基聚乙二醇酯 [P(PLAMA-co-MAA)-b-PPEGMA]. 通过核磁共振氢谱(¹H NMR)和凝胶渗透色谱(GPC)表征了聚合物的结构、分子量及分子量分布. 优化了反应条件并合成出分子量可控、分子量分布窄的聚合产物. 采用动态光散射法(DLS)、扫描电子显微镜(SEM)研究了聚合物分子刷在水溶液中自组装胶束的粒径、形貌及pH 响应行为. P(PLAMA-co-MAA)-b-PPEGMA 自组装形成粒径分布均匀的球形胶束. 且随着溶液pH 值从7 降低至3, 胶束中的PMAA 逐渐去离子化, 溶胀的胶束逐渐收缩, 粒径由200～300 nm 减小至150 nm 左右; 但当pH 值减小到2 以下, 胶束表面电荷量非常小, 胶束聚集, 使得粒径增大.     

笼形聚羧酸树脂的溶胀

研究了甲基丙烯酸—丙烯酸—二乙烯基苯接枝聚丙烯(PP-g-P[MAA-co-AA-co-DVB])、甲基丙烯酸—丙烯酸—双甲基丙烯酸三甘醇酯接枝聚丙烯(PP-g-P[MAA-co-AA-co-TGDMA])和甲基丙烯酸—二乙烯基苯接枝聚丙烯(PP-g-P[MAA-co-DVB])等系列制成的笼形聚羧酸钠在水溶液中的溶胀行为。PP-g-P[MAA-co-AA-co-DVB)/Na笼形树脂的溶胀度与交联密度的平方根成反比。PP-g-P(MAA-co-AA-co-TGDMA)/Na笼形树脂的溶胀度与交联密度关系比较复杂,可能是交联链的构型在一定的交联密度范围内最有利于水分子的吸留,但仍能保持交联网络结构不发生扭转缠结。PP-g-P(MAA-co-DVB)/Na笼形树脂的溶胀度测定结果表明,树脂的溶胀度不但随交联密度发生变化,而且和树脂上羧基的分布密度有关,认为是同荷离子相互排斥所引起的网络扩张的结果。     

改性聚苯乙烯微球的制备及其胶体晶体的组装

采用甲基丙烯酸改性的无皂乳液聚合方法制备了尺寸为210 nm、含羧基的聚苯乙烯(PS)微球，用红外光谱、透射电子显微镜和粒度分析仪对其形状和结构进行分析，结果表明，经甲基丙烯酸改性后得到了表面为高密度电荷的单分散性PS微球.用垂直沉积法快速制备出在较大范围(大于1 cm2)呈现很好有序性的密排结构聚苯乙烯胶体晶体薄膜，其在590 nm波长处存在光子带隙.在电子显微镜下，观察到这种胶体晶体是面心立方(fcc)密排结构.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.