Eu~(2+),Mn~(2+)共激活碱土镁硅酸盐基红色荧光粉的发光性能

制备了以R3MgSi2O8(R=Ba,Sr,Ca)为基,Eu2+,Mn2+共激活的红色荧光粉并研究了其荧光性质。分别以Ba3MgSi2O8,Sr3MgSi2O8,Ca3MgSi2O8为基质时,由于晶体场环境不同,发光强度、发射峰产生相应变化。研究了以(Ba,Sr)3MgSi2O8为基的荧光粉中Ba,Sr相对量,及Eu2+,Mn2+浓度对发光性质的影响并探讨了Eu2+,Mn2+在基质中所处格位;结果表明,红光是由基质中处于九配位的Eu2+将能量传递给八面体六配位的Mn2+,而由Mn2+所发射的。     

Eu2+/Mn2+激活的M3MgSi2O8-M2SiO4(M=Ba,Ca)荧光粉的发光特性

采用高温固相法制备了Eu2+/Mn2+单激活和共激活的M3MgSi2O8-M2SiO4(M=Ba,Ca)两相荧光粉.通过X射线衍射(XRD)和荧光光谱(PL)对样品材料的晶体结构和光谱性能进行了表征.XRD测试结果表明所合成的样品具有M3MgSi2O8和M2SiO4两种晶相结构.PL测试显示,Eu2+在Ba3MgSi2O8-Ba2SiO4体系中发射442和502nm两个波带的光;而Eu2+在Ca2+部分取代Ba2+的BaCa2MgSi2O8-Ba1.31Ca0.69SiO4体系中发射420～520nm的连续波带,并且激发光谱向长波扩展,更加适用于被InGaN芯片(395 nm)激发.通过改变Mn2+的掺杂量可制得颜色可调的BaCa2MgSi2O8-Ba1.31Ca0.69SiO4:Eu2+,Mn2+白光荧光粉.     

微乳液法制备MAl2O4：Eu^2＋，Dy^3＋（M=Ca，Sr，Ba）发光材料及其发光性能

采用微乳液法合成了MAl2O4：Eu^2＋，Dy^3＋（M=Ca，Sr，Ba）长余辉发光材料，并对其晶体结构和发光性能进行了比较与讨论。XRD分析表明，所合成的Ca2O4：Eu^2＋，Dy^3＋，SrAl2O4：Eu^2＋，Dy^3＋粉体为单斜晶系结构，BaAl2O4：Eu^2＋，Dy^3＋粉体为六方晶体结构。MAl2O4：Eu^2＋，Dy^3＋（M=Ca，Sr，Ba）发光材料的激发光谱都为一宽带连续谱，表明从紫外至可见光均可有效的激发该材料。发射光谱的发射波长峰值分别为440nm（M=Ca），520nm（M=Sr）和496nm（M=Ba）。对应的发光颜色分别为蓝色、黄绿色和蓝紫色。余辉衰减曲线分为快衰减、中间过渡衰减和随后极长的慢衰减过程，符合双曲线方程I=At^-n，余辉亮度与时间顺序为Sr〉Ca〉Ba。     

溶胶-凝胶法制备Sr2MgSi2O7：Eu^2＋，Dy^3＋长余辉发光材料

采用溶胶-凝胶法合成了以Sr2MgSi2O7为基质，掺杂Eu^2 ，Dy^3 的长余辉发光材料，并表征其结构，激发-发射光谱和余辉衰减曲线。XRD分析表明，所合成的样品为Sr2MgSi2O7晶体结构。发光粉体的激发波长范围较宽，表明从紫外至可见光均可激发该发光材料。发射光谱主峰位于466nm。样品在自然光照射后持续发出明亮的蓝光，余辉时间持续8h以上。     

Sr／Ca比变化对红色荧光粉Ca1-xSrxS：Eu^2＋的影响

在CO气氛下采用固相反应法合成了发红光的Ca1-xSrxS:Eu^2 荧光粉，研究了基质阳离子Sr／Ca比变化对其晶体性质及发光性能的影响。结果表明，随着Sr／Ca比的减少，荧光粉的晶胞参数逐渐降低；同时，由于受电子云膨胀效应和晶体场影响，发射主峰向长波方向移动，红色比逐渐增大，色纯度提高。     

Sr4-xMgxSi3O8C14：Eu^2＋荧光粉的发光特性和晶格环境研究

利用Van Uitert公式讨论了Sr4Si3O8C14：Eu^2 中Eu^2 的晶格环境，并采用高温固相法合成了Eu^2 激活的氯硅酸镁锶Sr4-xMgxSi3O8C14荧光粉，实现了发射光从蓝绿一蓝紫色的变化。X射线衍射实验和荧光光谱数据表明，MG^2 的掺杂使Sr4-xMgxSi3O8C14基质中的晶格环境发生改变，从而出现两种不同Eu^2 的发光中心。     

Er^3＋铋铅锶玻璃吸收光谱和上转换光谱

采用溶胶-凝胶法合成了以Sr2MgSi2O7为基质，掺杂Eu^2 ，Dy^3 的长余辉发光材料，并表征其结构，激发-发射光谱和余辉衰减曲线。XRD分析表明，所合成的样品为Sr2MgSi2O7晶体结构。发光粉体的激发波长范围较宽，表明从紫外至可见光均可激发该发光材料。发射光谱主峰位于466nm。样品在自然光照射后持续发出明亮的蓝光，余辉时间持续8h以上。     

一类新的红色荧光粉MYzS4：Er^3＋（M=Srz＋，Ba^2＋）的合成与表征

Eu^2＋激活的CaS：Eu^[1],Eu^3＋和Sm^3＋激活的硫氧化物^[2]，Pr^3＋激活的Ca0.8Zn0.2Ti03^[3]以及Eu^2＋和Mn^2＋掺杂的SrY2S4^[4]都是重要的红色发光材料。然而，这些红色荧光粉的发射峰波长都短于650nm，对于农用日光转换材料^[5]，红色发射峰波长达到660nm才能与叶绿素的红区吸收相吻合。     

MO-RE2O3-B2O3(M=Mg,Ca,Sr,Ba;RE=La,Eu,Gd)玻璃的发光性质

在空气中采用高温固相反应方法合成的17MO－（8-x-y)-75B2O3-xGd2O3(MLBEG,M-Mg,Ca,Sr,Ba)玻璃，在紫外光（λex=350nm)激发下发射蓝光和红光，在绿色光（λex=532nm)激发下发射红光，电子自旋共振谱研究表明玻璃体系中有Eu^2 离子存在，蓝色区的宽带发射是Eu^2 离子的5d-4f跃迁发射：红色区的窄带发射是Eu^3 离子的5Do-7FJ(J=1,2,3,4)跃迁发射，发现玻璃中的碱土金属离子对Eu^3 /Eu^2 离子的比例有很大影响，选择不同的碱土金属离子可以调节玻璃蓝色光和红色光的相对发射强度，MLBEG玻璃的发光性质可用于转换太阳能，增强植物的光合作用。     

发光材料BaAl2Si2O8∶Eu^2＋的物相结构与发光性能

硅酸盐类物质作为发光材料基质．发光中心和基质相互作用能量较低。可使发光中心离子直接吸收激发能量,利于提高发光效率。目前。研究较多的硅酸盐类发光材料为Zn2SiO4、Sr2MgSi2O7、Ba3MgSi2O8等。铝硅酸钡通常归属于硅酸盐范畴,铝硅酸盐的结构复杂、物相组成变化多样．一般实验条件下很难获得单一物相产物。碱土金属铝硅酸盐作为发光材料基质由来已久,     

Phase relations in the K2W2O7-K2WO4-KPO3-Bi2O3 system and structure of K6.5Bi2.5W4P6O34

The phase relations in the cross-section of the K₂W₂O₇-K₂WO₄-KPO₃ containing 15 mol% Bi₂O₃ were undertaken using flux method. Crystallization fields of K_6.5Bi_2.5W₄P₆O₃₄, K₂Bi(PO₄)(WO₄), Bi₂WO₆, KBi(WO₄)₂ and their cocrystallization areas were identified. Novel phase K_6.5Bi_2.5W₄P₆O₃₄ was characterized by single-crystal X-ray diffraction: sp. gr. P−1, a=9.4170(5), b=9.7166(4), c=17.6050(7) Å, α=90.052(5)°, β=103.880(5)° and γ=90.125(5)°. It has a layered structure, which contains {K₇Bi₅W₈P₁₂O₆₈}_∞ layers stacked parallel to ab plane and sheets composed by potassium atoms separating these layers. Sandwich-like {K₇Bi₅W₈P₁₂O₆₈}_∞ layers are assembled from [W₂P₂O₁₃]_∞ and [BiPO₄]_∞ building units, and are penetrated by tunnels with K/Bi atoms inside. FTIR-spectra of K₂Bi(PO₄)(WO₄) and K_6.5Bi_2.5W₄P₆O₃₄ were discussed on the basis of factor group theory.     

KCl-KBO2-K2CO3, K2MoO4-KBO2-K2CO3, and K2WO4-KBO2-K2CO3 ternary systems

phase diagrams of KCl-KBO₂-K₂CO₃, K₂MoO₄-KBO₂-K₂CO₃, and K₂WO₄-KBO₂-K₂CO₃ ternary systems were studied by a calculation-experimental method and differential thermal analysis (DTA). The coordinates of ternary eutectics were determined to be E ₁: 622°C, 8.5 mol % KBO₂, 56.5 mol % KCl, and 35 mol % K₂CO₃; E ₂: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂MoO₄; E ₃: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂WO₄. The specific heats of melting of the eutectics were determined.     

Sol-gel synthesis of K3InF6 and structural characterization of K2InC10O10H6F9, K3InC12O14H4F18 and K3InC12O12F18

K₃InF₆ is synthesized by a sol-gel route starting from indium and potassium acetates dissolved in isopropanol in the stoichiometry 1:3, with trifluoroacetic acid as fluorinating agent. The crystal structures of the organic precursors were solved by X-ray diffraction methods on single crystals. Three organic compounds were isolated and identified: K₂InC₁₀O₁₀H₆F₉, K₃InC₁₂O₁₄H₄F₁₈ and K₃InC₁₂O₁₂F₁₈. The first one, deficient in potassium in comparison with the initial stoichiometry, is unstable. In its crystal structure, acetate as well as trifluoroacetate anions are coordinated to the indium atom. The two other precursors are obtained, respectively, by quick and slow evaporation of the solution. They correspond to the final organic compounds, which give K₃InF₆ by decomposition at high temperature. The crystal structure of K₃InC₁₂O₁₄H₄F₁₈ is characterized by complex anions [In(CF₃COO)₄(OH_x)₂]^(5−2x)− and isolated [CF₃COOH_2−x]^(x−1)− molecules with x=2 or 1, surrounded by K⁺ cations. The crystal structure of K₃InC₁₂O₁₂F₁₈ is only constituted by complex anions [In(CF₃COO)₆]³⁻ and K⁺ cations. For all these compounds, potassium cations ensure only the electroneutrality of the structure. IR spectra of K₂InC₁₀O₁₀H₆F₉ and K₃InC₁₂O₁₂F₁₈ were also performed at room temperature on pulverized crystals.     

Solubility in the Na2Cr2O7-(NH4)2Cr2O7-K2Cr2O7-H2O system

Solubility in the Na₂Cr₂O₇-(NH₄)₂Cr₂O₇-K₂Cr₂O₇-H₂O four-component water-salt system at 25, 50, and 75°C was studied for the first time. Phase field boundaries for individual salts and potassium and ammonium dichromate solid solutions, monovariant lines, and invariant points were determined. Experimental data were used to optimize the looped isohydric process of potassium dichromate preparation involving additional salts.     

Li2SO4-Na2SO4-H2O和Li2SO4- K2SO4-H2O溶液的体积性质

本文用高精度数字式振荡管密度计测定了288K至318K温度范围内Li₂SO₄ + Na₂SO₄ + H₂O和 Li₂SO₄ + K₂SO₄ + H₂O三元体系的密度。混合溶液的离子强度范围从0.1到4.5 mol.kg_–1,混合溶液中Na₂SO₄和K₂SO₄的离子强度分数为0.2,0.4,0.6和0.8。用密度实验值拟合得到了不同温度下Pitzer离子相互作用模型混合参数θ_V和 ψ_V,模型的计算值与实验值的偏差在±0.002 g.cm_–3以内。用Pitzer模型计算了不同离子强度下三元体系的混合体积。     

NaBO2-NaCl-Na2CO3, NaBO2- Na2CO3-NaMoO4, NaBO2- Na2CO3-NaWO4, and NaBO2-NaCl-Na2WO4 ternary systems

The phase diagrams of the NaBO₂-NaCl-Na₂CO₃, NaBO₂-Na₂CO₃-Na₂MoO₄, NaBO₂- Na₂CO₃-Na₂WO₄, and NaBO₂-NaCl-Na₂WO₄ ternary systems were studied by a calculation-experimental method and differential thermal analysis. The coordinates of ternary eutectics were determined: E ₁: 612°C, 16 mol % NaBO₂, 42 mol % NaCl, and 42 mol % Na₂CO₃; E ₂: 568°C, 12 mol % NaBO₂, 28 mol % Na₂CO₃, and 60 mol % Na₂MoO₄; E ₃: 575°C, 12 mol % NaBO₂, 32 mol % Na₂CO₃, and 56 mol % Na₂WO₄; E ₄: 628°C, 8 mol % NaBO₂, 20 mol % NaCl, and 72 mol % Na₂WO₄; and E ₅: 655°C, 9 mol % NaBO₂, 53 mol % NaCl, and 38 mol % Na₂WO₄.     

Theoretical study of polyoxide clusters B20O30, Al20O30, V20O50, Si20O30H20, and Si20O30F20

The structural, electronic, and vibrational characteristics and energies of the isolated polyoxide clusters B₂₀O₃₀, Al₂₀O₃₀, V₂₀O₅₀, Si₂₀O₃₀H₂₀, and Si₂₀O₃₀F₂₀ and their complexes with the H⁻ ion and ammonia complexes Al₂₀O₃₀ · nNH₃ have been calculated by the density functional theory B3LYP method with different basis sets. The computation results show that the symmetric closo structure I _h with oxygen bridges located above the centers of the faces of an empty [M₂₀] dodecahedron is more favorable for V₂₀O₅₀, Si₂₀O₃₀H₂₀, and Si₂₀O₃₀F₂₀. For B₂₀O₃₀, the cage closo isomer is also more favorable than the other isomers, but its structure is severely distorted as compared to a dodecahedron and has a symmetry close to C ₃ . For Al₂₀O₃₀, the I _h structure corresponds to a high-lying local minimum of the potential energy surface. For Al₂₀O₃₀, a set of unusual puckshaped isomers of symmetry C _i , with different numbers of four-coordinate atoms ^IVAl and three-coordinate atoms ^IIIO, was localized; these structures are more than 90 kcal/mol more favorable than the dodecahedron I _h . The most favorable isomer of Al₂₀O₃₀ contains twelve four-coordinate atoms ^IVAl and four five-coordinate atoms ^VAl. The energies of dissociation of the most favorable M₂₀O₃₀ clusters into the M₂O₃ (C _2v ) and M₄O₆ (T _d ) fragments and, in the case of Al₂₀O₃₀, also into the Al₈O₁₂ (O _h ) and Al₁₂O₁₈ (D _3d ) fragments, have been estimated. The conclusion has been drawn that these clusters can, in principle, exist and can be experimentally detected in the isolated state. Analogous calculations have been performed for ammonia complexes Al₂₀O₃₀ · nNH₃ with n varying from 1 to 20. The effect of solvation on the relative stability of the dodecahedral and puckshaped isomers of the Al₂₀O₃₀ cluster is observed. The isomers with ammonia molecules in their first coordination sphere become much closer to one another on the energy scale; however, the dodecahedron remains a considerably less favorable intermediate. Original Russian Text ? O.P. Charkin, N.M. Klimenko, D.O. Charkin, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 4, pp. 624–635.     

Structural chemistry of Sr3Cr2WO9, Ca3Cr2WO9, and Ba3Cr2WO9

We have studied the preparation and crystallographic structure of three perovskite-type compounds: Sr₃Cr₂WO₉, cubic, the lattice parameter of which is a = 7.812Å; Ca₃Cr₂WO₉, tetragonal, the lattice parameters of which are a = 5.408 Å and c = 7.635Å; and Ba₃Cr₂WO₉, hexagonal, the lattice parameters of which are a = 5.691 Å and c = 13.957Å. We have compared these three structures and shown the relationship between the dimensions of the alkaline-earth metal and the existence of the different structures.     

SnSbBiS4-SnS and SnSbBiS4-Sn2Sb6S11 sections of the SnS-Sb2S3-Bi2S3 ternary system

SnSbBiS₄-SnS and SnSbBiS₄-Sn₂Sb₆S₁₁ sections were studied by physicochemical methods (DTA, X-ray powder diffraction, microstructure observation, and microhardness measurements). These sections were found to be eutectic quasi-binary sections of the SnS-Sb₂S₃-Bi₂S₃ ternary system. Solid solution regions based on the initial components were found on either side of the sections. Alloys in the solid solution region are p-type semiconductors.     

Nitrato- and fluoroboracites M3B7O13NO3 and M3B7O13F

New boracites containing nitrato- or fluoroanions that appear to be true low-pressure phases have been synthesized at superatmospheric pressures. The M₃B₇O₁₃NO₃ compounds (M = Co, Ni, Cu, Zn, Cd) transform rapidly and reversibly in the temperature region 300–500°C between probable orthorhombic and face centered cubic symmetry, while the M₃B₇O₁₃F compounds (M = Mg, Mn, Fe, Co, Zn) appear to maintain rhombohedral symmetry up to their decomposition temperatures of 800–900°C. True high-pressure boracite-like phases containing F and Cr, Mn, Fe, or Co that decompose upon heating to M₃B₇O₁₃F have also been isolated.