功能化氧化石墨烯负载Pd纳米颗粒催化Heck偶联反应

以3-(2-氨乙基)-氨丙基三甲氧基硅烷(NN)功能化氧化石墨烯(GO)负载Pd纳米颗粒,得到Pd@GO-NN催化剂,通过红外光谱、X射线衍射、高分辨透射电子显微镜和热重分析对催化剂进行表征,并将该催化剂用于Heck偶联催化反应,表现出优越的催化活性,且拓展到不同的反应底物仍有较好的效果,循环实验表明该催化剂易分离并能循环使用.     

金在氨基硅烷修饰SBA-15上的巴豆醛选择加氢性能

采用三种氨基硅烷试剂(APTS: 3-氨丙基三甲氧基硅烷, TPED: N-(2-氨乙基)-3-氨丙基三甲氧基硅烷, TPDT: 3-[2-(2-氨基乙基氨基)乙基氨基]丙基-三甲氧基硅烷)对介孔SBA-15分子筛进行后嫁接表面功能化(分别记为APTS-SBA-15, TPED-SBA-15和TPDT-SBA-15), 然后利用氨基与氯金酸之间的静电作用及化学还原法, 将金纳米粒子引入分子筛的介孔孔道. 采用N₂物理吸附、X射线衍射(XRD)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)等手段对催化剂的结构和电子性质进行了系统表征; 以巴豆醛液相加氢制巴豆醇反应比较了氨基硅烷的种类对催化性能的影响. 结果表明, 氨基硅烷的给电子能力是决定金催化剂上C＝O键加氢选择性的主要因素, 氨基硅烷的给电子能力越强, 金活性位上的电子密度越高, 则巴豆醇的选择性和收率就越高.     

氨基修饰Pd/TiO_2/C复合催化剂的制备及在碱性溶液中对乙醇的催化氧化性能

以钛酸四丁酯为前驱体,采用水热法合成二氧化钛纳米片(TiO2),通过3-氨基丙基-三甲氧基硅烷(APTMS)分子对TiO2表面进行氨基修饰后,将其与Vulcan XC-72活性炭复合作为载体,吸附钯前驱体后,再进行液相还原制得Pd/TiO2/C-APTMS复合催化剂.用透射电子显微镜(TEM)、X射线能量色散谱(EDS)、电感耦合等离子体原子发射光谱(ICP-AES)、X射线衍射谱(XRD)和X射线光电子能谱(XPS)表征了催化剂的形貌、组成和结构.电化学测试结果表明,与传统液相混合还原制备的Pd/TiO2/C复合催化剂和Pd/C相比,经氨基修饰后的Pd/TiO2/C-APTMS复合催化剂在碱性溶液中对乙醇氧化具有更高的电催化活性和稳定性.     

银纳米颗粒负载阶层多孔二氧化硅块体的制备及表征

以溶胶-凝胶伴随相分离法制备的阶层多孔二氧化硅作为载体,3-氨丙基三乙氧基硅烷(APTES)为改性剂,乙醇为还原剂,在阶层多孔二氧化硅固体骨架上进行银纳米颗粒均匀负载.利用扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、汞压、N2吸附/脱附、X射线光电子能谱(XPS)等测试技术对银纳米颗粒负载阶层多孔二氧化硅进行了表征,探讨了APTES表面改性、乙醇还原机理以及银纳米颗粒负载块体的孔结构特征变化规律.结果表明:APTES表面改性将氨基接枝于阶层骨架上,氨基与银离子形成银氨离子,银氨离子经乙醇还原后将平均粒径约16 nm的银纳米颗粒成功负载于二氧化硅的大孔及介孔内部;负载后的阶层多孔块体的大孔骨架未受到破坏,但其比表面积由418 m2·g-1下降到254m2·g-1,两次还原负载能提高银纳米颗粒的负载量.     

硅纳米片负载钯催化剂的制备及其催化Suzuki反应研究

通过硅化钙在酸性条件下水解制得二维硅纳米片载体材料,经3-氨丙基三乙氧基硅烷化学改性后与钯配位,再经还原得到了一种新型的硅纳米片负载钯催化剂,采用透射电镜和电感耦合等离子体质谱(ICP-MS)等手段对其进行了表征.并将该催化剂成功应用于Suzuki反应,结果表明,硅纳米片负载钯催化剂在较低的钯催化量和空气氛围下即可有效地催化多种溴代芳烃和芳基硼酸的Suzuki偶联反应.此外,该催化剂经8次循环使用后,催化活性无明显下降.     

银纳米颗粒负载阶层多孔二氧化硅块体的制备及表征

以溶胶-凝胶伴随相分离法制备的阶层多孔二氧化硅作为载体,3-氨丙基三乙氧基硅烷（APTES）为改性剂,乙醇为还原剂,在阶层多孔二氧化硅固体骨架上进行银纳米颗粒均匀负载. 利用扫描电镜（SEM）、透射电镜（TEM）、X射线衍射（XRD）、汞压、N₂吸附/脱附、X射线光电子能谱（XPS）等测试技术对银纳米颗粒负载阶层多孔二氧化硅进行了表征,探讨了APTES表面改性、乙醇还原机理以及银纳米颗粒负载块体的孔结构特征变化规律. 结果表明：APTES表面改性将氨基接枝于阶层骨架上,氨基与银离子形成银氨离子,银氨离子经乙醇还原后将平均粒径约16 nm的银纳米颗粒成功负载于二氧化硅的大孔及介孔内部;负载后的阶层多孔块体的大孔骨架未受到破坏,但其比表面积由418 m²·g^-1下降到254 m²·g^-1,两次还原负载能提高银纳米颗粒的负载量.     

纳米金催化(杂环)芳基酯与卤代烷经由C—O键活化的酯交换反应（英文）

报道了一种纳米金催化(杂环)芳基酯与卤代烷经由C—O键活化的酯交换反应.在一系列负载金纳米颗粒和钯纳米颗粒催化剂中,粒径为3.63nm,负载量为3wt%的Au/γ-Al_2O_3催化剂表现出最佳催化活性.该催化剂重复使用五次后仍表现出较高活性.对反应前后催化剂的X射线光电子能谱(XPS)分析表明,该反应可能是通过以Au~0为始态的催化循环来进行的.     

乙烯基乙酸酯合成钯-金催化剂中金的助催化作用

硅胶负载的钯-金双金属催化剂是乙烯乙酰氧基化制乙烯基乙酸酯(VA)的高选择性催化剂,本文应用平面和负载纳米颗粒模型催化剂体系研究金的助催化作用,应用低能离子散射谱、低能电子衍射、X射线光电子能谱、反射红外吸收光谱及程序升温脱附等技术表征这些模型催化剂.结果表明,金的主要助催化作用是隔离催化剂表面的催化活性钯原子,形成孤立的钯活性中心,从而大大抑制或消除反应物和/或产物在毗邻多原子钯中心上的深度分解,提高VA合成的选择性及活性.同时由于形成了孤立的钯原子活性中心,反应副产物或中间物之一的一氧化碳吸附较弱,避免了催化剂表面的一氧化碳中毒,进而提高催化活性.     

磁性氧化铝负载Pd催化剂对硝基苯加氢催化活性的研究

采用微乳法室温下合成了γ-Al2O3/SiO2/Fe3O4磁性复合颗粒为载体负载的纳米钯催化剂.利用透射电镜、x射线光电子能谱和振动样品磁强计等手段对催化剂进行表征,评价了催化剂对硝基苯加氢制苯胺反应的催化活性.结果表明,通过调控反应条件,可在平均粒径为200nm左右的磁性载体上负载10m左右均匀分散的Pd纳米颗粒,整个催化剂呈现超顺磁性;在催化剂磁含量为8%、Pd负载量1%、反应时间40min、反应温度50℃,反应压力0.5MPa条件下,硝基苯的转化率可以达到100%,催化剂重复使用10次时仍可保持很高的催化活性,并可在外磁场作用下快速分离与回收.     

KBH4还原法制备超细Pd/γ-Al2O3 催化剂及其在蒽醌加氢反应中的应用

 通过KBH4还原浸渍到载体上的Pd物种制备了超细Pd/γ-Al2O3 催化剂,并采用X射线衍射、高倍透射电镜、能谱、能量损失谱和电感耦合等离子体发射光谱等对其进行了表征. 结果表明,催化剂中活性组分Pd以纳米尺度的微晶形式存在,而不是Pd-B非晶态合金. 蒽醌加氢制双氧水反应证明,与浸渍焙烧法制备的PdO/γ-Al2O3 催化剂相比,经KBH4还原制得的Pd/γ-Al2O3 催化剂中钯的晶体颗粒更小,分散度更高,从而催化剂的活性更高,其氢化效率比PdO/γ-Al2O3 提高了35%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.