CTAB存在下双酚A在纳米氧化锌/碳纳米管复合材料修饰电极上的电化学行为及测定

利用水热法合成了纳米氧化锌/碳纳米管复合材料,将该复合材料滴涂在玻碳电极表面,制得纳米氧化锌-碳纳米管复合材料修饰电极(ZnO-MWCNTs/GCE)。在阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)存在下,利用循环伏安法研究了双酚A在修饰电极上的电化学行为。考察了溶液pH值、CTAB浓度和富集时间等对测定的影响。结果表明,在pH 7.0的含8.0×10-5mol/L CTAB的磷酸盐缓冲液中,该修饰电极对双酚A具有良好的电化学响应,双酚A在修饰电极上的氧化峰电流为裸电极上的7倍。在优化条件下,采用差分脉冲伏安法对双酚A进行测定。双酚A的峰电流在5.0×10-8~1.5×10-5mol/L浓度范围内呈良好的线性关系,检出限(S/N=3)为1.0×10-8mol/L。对1.0×10-5mol/L双酚A平行测定8次的相对标准偏差为4.6%。该法用于塑料制品中溶出双酚A的测定,回收率为99%~107%,结果满意。     

双酚A在氮掺杂多壁碳纳米管修饰电极上的电化学行为及测定

构建了不同百分含量的氮掺杂的多壁碳纳米管化学修饰石墨电极,利用线性扫描伏安法及循环伏安法研究了双酚A(BPA)在修饰电极上的电化学行为。提出了一种灵敏、简便的直接检测双酚A的电化学分析方法。在pH6.98的PBS缓冲溶液中,在电位0.20 V富集后,该修饰电极在0.680 V出现一个灵敏的、峰形好的氧化峰。表明氮掺杂多壁碳纳米管薄膜对双酚A的氧化表现出一定的催化作用,能显著提高双酚A的氧化峰电流。在优化条件下,采用线性扫描伏安法对双酚A进行测定。双酚A的氧化峰电流与其浓度在2.5×10-7～1.0×10-4 mol/L之间有很好的线性关系(R为0.996),检出限为5.0×10-8mol/L。电极已初步用于实际样品中BPA的测定。     

石墨烯-金纳米粒子复合膜修饰电极的制备及对双酚A的测定

采用电化学还原技术,通过一步电沉积制备了石墨烯-金纳米粒子复合膜修饰电极(ERGO-Au/GCE).采用透射电子显微镜(TEM)和循环伏安(CV)法对修饰电极进行了表征,并研究了双酚A(BPA)在该修饰电极上的电化学行为.结果表明,所制备的复合物修饰电极对双酚A有明显的电催化效果.在p H=6.0的磷酸盐缓冲溶液中,双酚A在0.3~1.0 V扫描电位范围内有1个不可逆的氧化还原峰出现.在优化的条件下,双酚A的浓度在3.00×10-8~1.30×10-5mol/L范围内与其氧化峰电流呈线性关系,检出限为1.0×10-8mol/L(S/N=3).将该修饰电极用于饮用水和塑料制品中双酚A含量的测定,回收率为96.4%~103.5%.     

金纳米粒子/碳纳米管修饰电极吸附伏安法测定微量间苯二胺

运用循环伏安法及线性扫描伏安法研究了间苯二胺在金纳米粒子/碳纳米管修饰玻碳电极上的电化学行为,优化并建立了一种直接测定间苯二胺的电化学分析方法。结果表明,与裸玻碳电极相比,金纳米粒子/碳纳米管修饰电极能显著提高间苯二胺的氧化峰电流。在优化条件下,氧化峰电流与间苯二胺浓度在3.0×10-8~1.0×10-6mol/L范围内呈现良好的线性关系,检出限为1.0×10-8mol/L,对1.0×10-7mol/L的间苯二胺溶液平行测定10次的RSD为4.2%。测定了实验室废水中的间苯二胺含量,3次测定结果的平均回收率为99.7%,RSD为2.1%。     

氟嗪酸在碳纳米管修饰电极上的电化学行为及含量的测定

在玻碳电极上制备了多壁碳纳米管/Nafion(MWNTs-Nafion)膜,用交流阻抗谱(EIS)、循环伏安法(CV)、线性扫描伏安法(LSV)研究了氟嗪酸在该膜上的电化学行为。与裸玻碳电极相比,这种纳米结构膜修饰的电极对氟嗪酸的电化学氧化显现出极好的促进作用,氟嗪酸的氧化峰电流明显增强,在修饰电极上于 0.97 V处产生了1个灵敏氧化峰。LSV测定氟嗪酸的线性范围为1.0×10-8～1.0×10-6mol/L和1.0×10-6～2.0×10-5mol/L,开路富集400 s后,检出限为8.0×10-9mol/L(3倍信噪比),方法可用于人尿中氟嗪酸的实时测定。     

还原氧化石墨烯-多壁碳纳米管复合膜负载金纳米粒子修饰玻碳电极检测双酚A

以水合肼为还原剂,采用均相还原法制备还原氧化石墨烯-多壁碳纳米管复合材料(rGO-MWCNTs),通过滴涂法将其修饰到玻碳电极(GCE)表面.以此复合材料为载体,采用电化学方法制备了金纳米粒子-还原氧化石墨烯-多壁碳纳米管复合膜修饰电极(AuNPs-rGO-MWCNTs/GCE).通过扫描电镜(SEM)、EDS能谱技术和电化学方法对此电极进行了表征.研究了双酚A在修饰电极上的电化学行为.结果表明,此电极对双酚A的电极过程具有良好的电化学活性,在0.10 mol/L PBS溶液(pH 7.0)中,微分脉冲伏安法测定双酚A的线性范围为5.0 × 10-9~1.0 × 10-7 mol/L和1.0 × 10-7~2.0 × 10-5 mol/L,检出限为1.0 ×10-9 mol/L(S/N=3). 将此电极用于模拟水样和超市购物小票样品中双酚A含量的测定,加标回收率分别为97%~110%和98%~104%.     

碳纳米管/纳米金修饰金电极上柔红霉素电化学行为的研究

将碳纳米管与纳米金结合修饰在金电极上制成修饰电极,并用于柔红霉素(DNR)的电化学行为研究和检测.在4.4 mmol/L磷酸盐缓冲溶液(pH=5.81)中,DNR在碳纳米管-纳米金/Au电极上有一对灵敏的氧化还原峰.还原峰电流与DNR的浓度在3.2×10-8～1.0×10-6mol/L和1.0× 10-6～2.2× 1...     

碳纳米管／纳米二氧化钛-聚苯胺载铂复合电极微分脉冲法测定葡萄糖

研究了多壁碳纳米管/纳米二氧化钛-聚苯胺载铂(CNT/nanoTiO2-PAn-Pt)复合电极对葡萄糖的电催化氧化作用。以0.5 mol/LKOH水溶液为底液,采用微分脉冲法在-0.5-0.2V电位区间扫描,在-0.33V(vs,SCE)附近产生的氧化电流峰灵敏度高且峰型好,故以此峰为定量峰。葡萄糖浓度在1.25×10-2~1.0×10-5mol/L与峰电流呈良好的线性关系,线性相关系数为0.99881,检出限为5.0×10-6mol/L。加入0.06m mol/L的抗坏血酸或0.3m mol/L的尿酸(模拟人血成份)均不干扰葡萄糖的测定。该电极对模拟血液中葡萄糖的测定,结果令人满意。     

单层碳纳米管修饰电极上盐酸曲普利啶的电化学行为及其应用研究

应用循环伏安法研究了盐酸曲普利啶在碳纳米管修饰电极上的电化学行为.结果表明:在0.1 mol/L磷酸盐缓冲溶液(pH 6.9)中,盐酸曲普利啶产生一灵敏的氧化峰,其峰电位为0.81 V(vs.Ag/AgCl),峰电流与盐酸曲普利啶在1.0×10-6～1.3×10-4 mol/L浓度范围内呈线性关系,检出限为5.0×10-7mol/L,已用于片剂中盐酸曲普利啶的测定.     

双酚A在壳聚糖石墨烯复合膜电化学传感器上的电化学行为及测定

采用hummers法制备了石墨烯,以碳糊电极为基底电极采用滴涂法制备了壳聚糖石墨烯复合膜电化学传感器(CTS/GR/CPE),并利用循环伏安法和线性扫描溶出伏安法研究了双酚A在电化学传感器上的电化学行为。在pH 7.4的磷酸盐缓冲液中,于-0.1V富集180s后,该电化学传感器对双酚A具有良好的电催化作用,于0.564V处有一灵敏的氧化峰,线性范围为1.00×10-6～7.00×10-5mol/L和7.00×10-5～1.00×10-3mol/L,检出限(S/N=3)为1.00×10-7mol/L。方法用于塑料制品中溶出双酚A的测定,回收率为96.4%～100.5%。     

The Colloidal Stabilization of Carbon with Carbon: Carbon Nanobubbles as both Dispersant and Glue for Carbon Nanotubes

The superior physical properties of carbon nanotubes (CNTs) have led to their broad application. Intrinsically, CNTs tend to agglomerate from hydrophobic interactions, which is highly undesirable for solution processing and device fabrication. Commonly, a stabilizer consisting of organic surfactants or polymers is used to disperse CNTs. Recently, we synthesized nitrogen‐doped carbon hollow nanospheres (25–90 nm), termed carbon “nanobubbles”. They bear superior dispersability in water and distinctive graphitic order. Herein, we describe the nanobubble‐assisted dispersion of CNTs in aqueous solution upon sonication. This process relies on the π–π interaction between the two aromatic carbon nanostructures, which can process their carbon mixture in water into conductive filter membranes, ink, and discs. This stabilization can be extended to other aromatic carbons. In addition, the π–π interaction may create a new type of carbon p–n junction that can be used to improve charge separation.     

Adsorption of Carbon Dioxide on Activated Carbon

The adsorption of CO2 on a raw activated carbon A and three modified activated carbon samples B, C, and D at temperatures ranging from 303 to 333 K and the thermodynamics of adsorption have been investigated using a vacuum adsorption apparatus in order to obtain more information about the effect of CO2 on removal of organic sulfur-containing compounds in industrial gases. The active ingredients impregnated in the carbon samples show significant influence on the adsorption for CO2 and its volumes adsorbed on modified carbon samples B, C, and D are all larger than that on the raw carbon sample A. On the other hand, the physical parameters such as surface area, pore volume, and micropore volume of carbon samples show no influence on the adsorbed amount of CO2. The Dubinin-Radushkevich (D-R) equation was the best model for fitting the adsorption data on carbon samples A and B, while the Preundlich equation was the best fit for the adsorption on carbon samples C and D. The isosteric heats of adsorption on carbon samples A, B, C, and D derived from the adsorption isotherms using the Clapeyron equation decreased slightly increasing surface loading. The heat of adsorption lay between 10.5 and 28.4 kJ/mol, with the carbon sample D having the highest value at all surface coverages that were studied. The observed entropy change associated with the adsorption for the carbon samples A, B, and C (above the surface coverage of 7 ml/g) was lower than the theoretical value for mobile adsorption. However, it was higher than the theoretical value for mobile adsorption but lower than the theoretical value for localized adsorption for carbon sample D.     

一维新型碳的同素异形体:碳链

碳链是一种完全一维的、具有电子轨道sp杂化结构的新型碳的同素异形体。正是由于碳链的独特的一维结构,使其拥有区别于富勒烯、石墨烯和碳纳米管的化学键,从而表现出更加优异的性能,如:理论预言碳链的机械强度是石墨烯的几倍;碳链的导热也类似于石墨烯和碳纳米管;碳链是具有直接带隙的半导体材料,且带隙的大小可以通过其长度来调控,其长度越长,带隙越小。尽管关于碳链的研究早在19世纪已经启其端绪,但是一直进展缓慢。直到近期,关于碳链的研究才有了几次突破性的进展,引起了学术界的广泛讨论。本文介绍了碳链的概念、结构和特殊的物理性质,在此基础上进一步介绍了碳链的几种典型的合成方法以及应用前景,重点阐述了近期碳链研究上的几次重大突破,并对于碳链研究的未来进行了展望,希望能引起国内外同行的关注。     

Growth of Single-walled Carbon Nanotubes on Substrates Using Carbon Monoxide as Carbon Source

The growth of single-walled carbon nanotubes(SWCNTs) on substrates has attracted great interests because of the potential applications in various fields. Carbon monoxide(CO) was used as the carbon source for the growth of SWCNTs on silicon substrates. Random or oriented SWCNTs can be produced by varying the CO flow rate. When the flow rate of CO was as low as 20 sccm(sccm:standard cubic centimeter per minute), dense SWCNT networks with clean surface were produced. When the flow rate was above 50 sccm, vertically aligned SWCNT(VA-SWCNT) arrays were grown. Well-aligned VA-SWCNT arrays were obtained in the temperature range of 650-800℃ and the content of large-diameter(above 1.7 nm) tubes in the array increased with the temperature. The height of the array was affected by the growth temperature, the CO flow rate, and the growth time. These findings indicate CO can be used as an efficient carbon source for the growth of SWCNTs on substrates under low flow rates.     

埃洛石纳米管模板法一步法制备一维碳纳米管/碳纳米棒混合纳米碳材料

利用埃洛石纳米管(HNTs)特有的中空纳米结构,以及丰富的界面化学性质,以聚乙烯醇(PVA)为碳源,采用浸渍填充纳米孔方法实现了一步制备一维碳纳米管(CNTs)/碳纳米棒(CNRs)混合纳米碳材料。考察模板剂(HNTs)和碳源(PVA)之间的比例关系对混合纳米碳材料的结构影响,利用XRD、FTIR、Raman、N2吸附-脱附测试、TEM、SEM以及电阻率和分散性等表征手段分析混合纳米碳材料的结构变化。结果发现,PVA填充含量的增加将导致产物中CNRs的质量分数增加;当PVA和HNTs质量之比为1∶1时,所制备的CNTs/CNRs的孔体积达到最大值2.142 cm~3·g-1,比表面积达到583 m~2·g-1,并且表现出较好的电导率和分散性,表明低的PVA填充比例制备的混合碳材料中CNTs含量较高。     

Ni/γ-Al2O3催化剂上CH4-CO2重整体系中积碳-消碳的研究

用动态热重技术和色谱技术联用以及XRD和TEM等表征手段,研究了Ni/γ-Al     

二氧化碳与低碳经济发展

由于二氧化碳无色无味,又存在于大气中,因此它在植物生长中的重要性被人类忽略了。其实二氧化碳是光合作用的反应物,是植物生长的重要原料;又是一种新型绿色肥料。人类应该着力开发以二氧化碳为原料的新型肥料发展低碳经济。     

Carbon clusters

Some of the most significant discoveries and achievements concerning the mass spectra and gas phase ion chemistry of carbon clusters are reviewed. These include (1) nanosecond and femtosecond laser ionizations; (2) ion structures through ion/molecule reactions, ion chromatography, and computational methods; (3) carbon cluster cooling through radiative decay, dissociative decay, and thermionic emission; (4) mechanisms and energetics of fragmentation reactions; (5) endohedral fullerenes including recent data on ion beam implantation, and (6) ion chemistry as a function of the fullerene charge state.     

碳纳米管含量对炭炭复合材料组织及力学性能的影响

炭纤维上原位合成了均匀生长且具有伸张形貌的碳纳米管,借助化学气相渗透制备了碳纳米管增强的炭炭复合材料,研究了不同含量的碳纳米管对炭炭复合材料组织和力学性能的影响。结果表明：炭纤维上生长碳纳米管改变了热解炭的沉积行为,诱导了各向同性热解炭的生成,且随着碳纳米管含量的增加,各向同性热解炭的厚度增加,但是复合材料的d002值却明显降低。微量的碳纳米管即可显著提高复合材料的力学强度,随着其含量的增加,复合材料的力学强度和模量迅速提高,但材料的断裂行为却急剧恶化,断裂模式由最初的假塑性断裂转变为脆性断裂。     

Palladium-Catalyzed Addition of Carbon Monoxide and Carbon Tetrachloride to 1-Octene in Supercritical Carbon Dioxide

The Pd-catalyzed addition of carbon monoxide and carbon tetrachloride to 1-octene gave coadduct [alkyl 2-( 2, 2, 2-trichloroethyl)octanoate] as the major product in supercritical carbon dioxide by using pyridine as the base. It was found that the selectivity and the yield of coadduct were greatly affected by the pressure of carbon dioxide, the reaction temperature and the amounts of alcohol and base used.