利用反相乳液-水滴模板法制备功能性生物基图案化结构

通过将传统水滴模板法中的单相成膜液改造为反相乳液体系,引进乳液水滴来加载蛋白质组分,实现了对亲水组分直接实施水滴模板法从而获得其阵列组装结构.利用壳聚糖纳米粒子作为皮克林反相乳液的乳化剂制备了稳定的反相乳液体系,并进一步得到聚乳酸/壳聚糖/牛血清白蛋白的杂化蜂窝状多孔薄膜,考察了壳聚糖粒子对于乳液稳定和所制备多孔阵列结构形貌的影响,研究了加入蛋白质浓度和乳液中的水相/油相比例对于所成膜孔形貌的影响,利用荧光标记蛋白质跟踪确认基于蜂窝状多孔阵列结构上的图案化蛋白质阵列组装形貌.     

利用呼吸图案法制备聚(苯乙烯-b-丙烯腈)有序多孔薄膜

以自制的聚(苯乙烯-b-丙烯腈)(PS-b-PAN)嵌段共聚物为成膜材料, 采用呼吸图案法制备了有序多孔薄膜, 采用扫描电子显微镜(SEM)对薄膜形貌进行了分析, 研究了聚合物浓度、溶剂种类及共聚物结构对薄膜结构的影响. 结果表明, 薄膜表层为多孔结构, 且孔为圆形、以六方阵列形式排列; 薄膜表层下面是蜂窝状结构.以三氯甲烷(CHCl₃)为溶剂时, 在较高浓度下制备的薄膜表层孔间距较大, 蜂窝结构尺寸较小, 且形成了多层结构. 与CHCl₃为溶剂时相比, 挥发速度较快的二硫化碳(CS₂)作溶剂时制备的多孔薄膜有序性较好, 薄膜表层孔径和孔间距均较大, 蜂窝结构尺寸较小. 以没有PAN链段的聚苯乙烯大分子引发剂(PS-Cl)为成膜材料时, 制备的薄膜表层没有形成多孔结构, 而是形成了窝状结构. 同时, 通过对薄膜表层晕的研究证明了多孔薄膜表层缺陷是由水滴处于液膜下较深的位置造成的.     

反相浓乳液方法制备聚苯乙烯/二乙烯基苯结构型泡孔聚合物

通过反相浓乳液聚合方法制备了系列聚苯乙烯/二乙烯基苯(PS/DVB)泡孔聚合物.水作为分散相,其分散相体积分数可达90%;苯乙烯单体作为连续相,聚合后构成PS/DVB泡孔聚合物的结构骨架.用扫描电镜系统研究了乳化剂的浓度、分散相体积分数、添加不同沸点的溶剂等对泡孔聚合物断面形态的影响,并考察了泡孔聚合物对水和柴油的吸附情况.结果表明,不同工艺条件下可以制备出不同孔径的泡孔聚合物,加入不同沸点溶剂使得泡孔壁也形成了多孔结构.     

反相微乳液法制备LaMnAl11O19-α甲烷燃烧催化剂

 在反相微乳液中以碳酸铵共沉淀法制备了LaMnAl11O19-α 甲烷燃烧催化剂,比较了反相微乳液法与普通碳酸铵共沉淀法对催化剂相结构、比表面积、孔结构及其催化甲烷燃烧性能的影响. 结果表明,反相微乳液法制备的催化剂前驱体平均粒径为2.3 nm,而普通碳酸铵共沉淀法得到的催化剂前驱体平均粒径为30.1 nm. 在乙醇超临界干燥阶段,反相微乳液法制备的催化剂前驱体较容易发生铝羟基分子间脱水,形成较为丰富的孔,保持了各组分分布的均匀性,从而促进了六铝酸盐的形成,所得样品具有较大的比表面积和较高的催化甲烷燃烧的活性.     

超浓反相聚合物乳液的粒径双峰分布特征及其与稳定性的关系

以丙烯酸、丙烯酰胺、2-丙烯酰胺基-2-甲基丙磺酸作为混合单体,Span-80和Tween-60作为复合乳化剂、采用氧化还原引发体系在常温下引发聚合,制备了稳定的超浓反相聚合物乳液,同时制备了低分散相体积分数的普通乳液及由普通乳液离心得到的超浓反相聚合物乳液作为对比研究.用显微镜观察了乳胶粒的形态,统计计算了乳胶粒粒径...     

由聚电解质自组装多层膜制备微孔薄膜

带有相反电荷的聚电解质通过静电作用交替沉积可以得到自组装多层膜,由于这种技术可操作性强,用途广泛,近十几年来已有了大量的研究．聚电解质多层膜在一定条件下可以形成纳米孔和微米孔．Fu等研究了聚丙烯酸和聚乙烯基吡啶组成的氢键自组装多层膜在碱溶液中溶去其中的聚丙烯酸后,剩下的聚乙烯基吡啶重构形成微孔薄膜．Mendelsohn等发现将聚丙烯酸和聚烯丙基胺自组装而成的多层膜浸入pH=2．4左右的溶液中可制备微孔薄膜．但这些方法并不能使强聚电解质多层膜形成多孔结构。     

不同溶剂制备的聚乳酸多孔微球的形成机理

利用改进的双乳液溶剂挥发法制备了多孔聚乳酸( PLA)微球.通过采用具有不同沸点和水溶性的有机溶剂制备得到不同多孔结构的PLA微球.结果发现以二氯甲烷、氯仿和甲苯为溶剂制备的微球具有相似的均匀多孔结构,而以乙酸乙酯制备的微球却具有中空结构和多孔的壳层.通过进一步的实验研究了溶剂种类对于微球多孔结构的影响.结果表明溶剂的...     

呼吸图案法制备蜂窝状有序多孔薄膜及其功能化应用

呼吸图案(BF)法是一种制备微纳米级规整多孔结构的简单、廉价和高效的方法, 它以水滴为模板, 通过水滴有序排列得到蜂窝状有序多孔结构, 其孔的形貌可以通过选择不同的成膜材料和成膜环境等条件得到控制, 所以在分离膜、模板、响应性表面、催化剂、光电材料等研究领域有广阔的发展前景. 但是, 到目前为止, 人们发现由于成膜条件的不同, 多孔膜的孔形貌受多种因素影响, 规整多孔膜形貌的控制机理还不是很明确, 没有一个统一的结论. 本文结合本课题组所做工作及近五年来国内外呼吸图案法制备蜂窝状有序多孔薄膜的研究成果, 对多孔薄膜的形成过程及其影响因素、多孔膜的功能化及应用等方面进行了归纳总结, 试图揭示孔的形成及孔形貌的调控等相关规律, 希望对后续的进一步研究与应用奠定基础.     

聚己二酸丁二酯纳米纤维构建的微球的制备

建立了采用异相成核和可控水解相结合的方法制备由纳米纤维构建的聚合物微球的新方法.根据多取代卞叉山梨醇(TM6)对聚己二酸丁二酯(PBA)的异相成核作用以及结晶形态的影响,采用两种乳液溶剂挥发法、并在聚合物溶液中加入成核剂TM6制备了PBA微球,研究了成核剂含量对PBA微球在酶促降解之后形态变化的影响.研究结果表明,二次乳液溶剂挥发法可以制备具有多孔结构的PBA微球,这种多孔结构有利于酶溶液进入到微球内部,促进PBA微球的均匀水解,最终获得由PBA纳米纤维构建的微球.当TM6的含量为3 wt%时,采用二次乳液溶剂挥发法制备的PBA微球,经过5 h酶促降解处理,可以得到表面和内部由PBA纳米纤维均匀组成的微球.进一步的细胞实验表明,微球的纳米纤维结构,有利于MG-63细胞在聚合物微球上的黏附、铺展和向内生长.     

制备方法对锰Mn掺杂钾六铝酸盐催化剂催化甲烷燃烧性能的影响

以甲烷催化燃烧为目标反应,通过共沉淀法、溶胶凝胶法和反相微乳液法制备了Mn掺杂六铝酸盐催化剂,用XRD和TG-DTA技术对催化剂进行了物理性能表征,通过BET模型计算了其比表面积。结果说明3种方法所制备催化剂经1 200℃焙烧4h后均可以形成完整的六铝酸盐晶型,同时都具有高的催化性能和高温稳定性,其中反相微乳液法制备的K2MnAl11O19催化剂具有较高的比表面积和甲烷催化燃烧活性,起燃温度T10%为458℃,至676℃甲烷完全转化。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.