激光诱导击穿光谱结合PLS算法检测脐橙皮中Pb元素

采用LIBS技术与火焰原子吸收法(AAS),获取23个浓度梯度的含Pb元素脐橙样品的LIBS光谱及Pb元素真实浓度信息,再对LIBS谱线信息进行数据预处理,建立PLS定量分析模型。当采用9点平滑结合SNV作为预处理方法时,PLS模型最佳,其校正集相关系数(R_t)、交叉验证均方根误(RMSECV)、预测集相关系数(R_p)、预测均方根误差(RMSEP)分别为0.9633,1.56,0.9542和2.58,脐橙中Pb元素预测结果的平均相对误差为6.9%。与小组前期对脐橙中Pb元素单变量和多元定标法相比,LIBS结合PLS建模时提高对脐橙微量重金属检测的准确性。     

激光诱导击穿光谱检测青菜中镉元素的多变量筛选研究

利用激光诱导击穿光谱(LIBS)技术与常规化学分析方法获取28个浓度梯度含Cd元素的青菜样品的LIBS谱线信息以及Cd含量信息.对获取的光谱信息结合标准归一化处理(SNV)、一阶导数(FD)、二阶导数(SD)、中心化处理(Center)作为偏最小二乘法(PLS)模型的优选方法;再根据4种预处理方法的预测结果选取最佳方法,同时将该方法作为间隔偏最小二乘法(iPLS)与联合区间间隔偏最小二乘法(SiPLS)优选青菜LIBS谱线的最佳波长区间.结果表明:通过SiPLS优选的特征波长区间分别为214.72 ～ 215.82 nm,215.88～ 216.97 nm,225.08 ～ 226.35 nm,并且经过中心化预处理后建立的验证模型效果最好,结果显示交叉验证均方根误差(RMSECV)为1.487,验证均方根误差(RMSEP)为1.094,相关系数(R)为0.9942,平均相对误差(ARE)为11.60％.研究结果表明,所选优化方法适合青菜中重金属Cd元素的LIBS校正模型的建立,且具有较好的预测效果.     

近红外光谱技术定量分析连作滁菊土壤中的阿魏酸含量

应用近红外光谱(NIRS)技术定量分析连作滁菊土壤样品中阿魏酸的含量.通过标准杠杆值、学生残差和马氏距离判断异常光谱,经二阶导数和Norris平滑滤噪预处理后,在6000~4000 cm-1范围,最佳因子数为7,采用偏最小二乘法(PLS)构建数学模型.结果表明,模型校正集和验证集与高效液相色谱仪(HPLC)测定的参考值之间均呈现良好相关关系,校正相关系数Rc为0.9914,交叉验证相关系数Rcv为0.9935,校正集误差均方根(RMSEC)为0.484,预测误差均方根(RMSEP)为0.539,交叉验证误差均方根(RMSECV)为0.615.研究结果表明,NIRS分析技术能够实现连作土壤中阿魏酸的快速检测,结果准确可靠.     

近红外光谱与组合的间隔偏最小二乘法测定清开灵四混液中总氮和栀子苷的含量

应用近红外光谱分析技术结合化学计量学方法, 建立了中药清开灵注射液中间体总氮和栀子苷含量测定的新方法. 首先采用Kernard-Stone法对训练集样本和预测集样品进行分类, 然后应用组合的间隔偏最小二乘法(Synergy interval partial least squares, siPLS)对所得近红外透射光谱进行有效谱段范围的选择以及二者定量校正模型的建立, 并对光谱预处理方法进行了详细的讨论. 所建立的总氮和栀子苷校正模型的预测相关系数(R)分别为0.999和0.708; 交叉验证误差均方根(RMSECV)均为0.023; 预测误差均方根(RMSEP)分别为0.074和0.159; 预测结果表明, 本实验所建方法快速、无损且可靠, 可推广并应用于中药注射液中间体的在线质量控制.     

激光诱导击穿光谱(LIBS)法微损快速检测党参中Pb

中药材重金属元素快速检测对污染监控及人们健康具有重要意义。激光诱导击穿光谱技术(Laser Induced Breakdown Spectroscopy, LIBS)属于一种快速检测方法,研磨压片等预处理方法相对样品消解已有所简化,但破坏了样品的物理性质,且不能满足中药材大宗品种、大批量检测需求。若进一步简化样品预处理,将更加凸显LIBS快速检测的优势。本文建立了激光诱导击穿光谱技术(LIBS)快速微损检测中药材样品重金属元素定标方法。线性相关系数R2为0.7764,建立的微损定标曲线线性可用于切片党参LIBS快速检测,对待测党参切片样品检测平均相对误差为3.74%,与电感耦合等离子体质谱法(ICP-MS)对比,相关系数R2为0.7957,验证了LIBS技术微损检测的可行性。制备的党参参考定标样品可多次重复用于待测样定标和仪器标定等。实验对待测党参样品仅进行切片处理,避免了研磨、压片等预处理,更加充分地体现LIBS快速检测的优势,为LIBS技术应用于中药材重金属元素快检等领域提供了一种新方法。     

基于遗传算法和偏最小二乘法的土壤激光诱导击穿光谱定量分析研究

在空气环境下,采用激光诱导击穿光谱(LIBS)技术对土壤成分进行检测,建立了基于遗传算法(GA)和偏最小二乘法(PLS)的定量分析模型。将配制的58个土壤样品分为定标集、监控集和预测集,对11种组分Mn,Cr,Cu,Pb,Ba,Al2O3,Ca O,Fe2O3,Mg O,Na2O和K2O的含量分别进行预测。结果表明,GA作为一种谱线选择的预处理方法,可以有效减少用于PLS建模的光谱谱线的数目,从而简化模型。对于土壤中的大部分组成成分,GA-PLS模型能够显著改善传统PLS模型的预测能力。以Mn元素为例,浓度预测均方根误差(RMSEP)从0.0215%降低至0.0167%,平均百分比误差(MPE)从8.10%降低至5.20%。本研究为进一步提高土壤的LIBS定量分析准确度提供了方法参考。     

猪肉中铅的LIBS绿色检测可行性分析

为了验证激光诱导击穿光谱(LIBS)分析猪肉中重金属铅(Pb)元素的可行性,选取经实验室Pb污染处理的猪肉样品为研究对象,将样品进行烘干、粉碎和压片物理前处理;利用LIBS获取压片样品的光谱信息,并采用原子吸收光谱(AAS)法对样品中Pb元素真实浓度进行检测。结果显示,LIBS能探测出Pb含量大于4.56 mg/kg的干样样品中Pb I405.78特征谱线信息,且样品中Pb特征线的LIBS强度与其浓度具有一定的梯度关系,但简单的线性关系不明显。采用一元二次多项式拟合结果表明,对于含量小于10 mg/kg的样品,预测准确度较高且线性分析灵敏度高,而高浓度样品预测准确度则显著降低。说明可能存在某个浓度界限决定采用不同定标模型的预测精度。本工作的研究为猪肉中Pb元素的LIBS分析提供了可行性证明,为进一步的研究提供了思路。     

近红外光谱法快速检测何首乌炮制过程中多糖含量的研究

该研究基于近红外光谱技术建立了何首乌在蒸制过程中多糖含量变化的快速定量模型。采用蒽酮-浓硫酸法测定了不同蒸制时间何首乌的多糖含量并结合采集的近红外光谱数据建立模型,以校正集相关系数(R²_c)、预测集相关系数(R²_p)、交叉验证集均方根误差(RMSECV)和预测集均方根误差(RMSEP)作为评价指标,考察了不同预处理方法和变量筛选方法的效果。结果显示,随着蒸制时间的延长,何首乌多糖含量先上升后下降并趋于平稳,采用平滑+变量标准化+随机蛙跳变量筛选建立的偏最小二乘法回归模型的R²_c=0.96,RMSECV=0.74,R²_p=0.96,RMSEP=0.28;外部预测相对偏差小于3.0%。所建立的多糖含量定量模型质量较高,预测能力较强,可为探索何首乌炮制工艺标准化及质量评价提供参考。     

白酒基酒中酮类物质的近红外光谱检测方法

应用近红外光谱技术建立了白酒基酒中2,3-丁二酮和3-羟基-2-丁酮的快速检测模型。从洛阳杜康酒厂选取182个白酒基酒样品为材料,运用气相色谱法测得两种物质的化学值,同时采集其在12 000~4 000 cm-1范围内的光谱数据,采用偏最小二乘法(PLS)结合内部交叉验证建立校正模型。通过对比不同光谱预处理下PLS模型效果对其进行优化,确定2,3-丁二酮和3-羟基-2 丁酮的最佳预处理方法分别为一阶导数+多元散射校正和二阶导数,最佳光谱区间分别为9 403.2~7 497.9 cm-1和9 403.2~7 497.9 cm-1+6 101.7~5 449.8 cm-1。优化后2,3-丁二酮和3 羟基-2-丁酮校正集样品的化学值和近红外预测值的决定系数(R2)分别为0.960 2和0.963 2,交叉验证均方根误差(RMSECV)分别为0.39、0.22 mg/100 mL;通过外部检验,验证集样品的R2分别为0.957 6和0.957 8,预测均方根误差(RMSEP)分别为0.40、0.24 mg/100 mL。结果表明,应用近红外光谱技术结合化学计量学方法所建立的模型有较高的准确度,能够满足白酒生产中酮类物质的快速检测需要。     

葡萄籽多酚大孔树脂纯化过程的近红外光谱快速检测

采用近红外光谱透射法,对葡萄籽提取液大孔树脂层析过程多酚含量进行快速无损测定.以FolinCiocalteus比色法为对照方法,运用偏最小二乘法(PLS)建立定量校正模型,测定大孔树脂洗脱过程葡萄籽多酚浓度变化.该模型相关系数R2达到0.9995,校正集误差均方根(RMSEC)和预测集误差均方根(RMSEP)分别为0.713和2.67,校正集相对偏差(RSEC)和预测集相对偏差(RSEP)分别为2.39％和8.48％.本方法快速、有效、无损,可用于葡萄籽多酚柱层析纯化过程检测和质量控制.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

化学计量中不确定度评定研究进展

测量不确定度是表征合理地赋予被测量之值的分散性的参数。本文针对化学计量不确定度评定基础模型仅适用于线性模型、概率分布为正态分布或缩放位移t分布等局限,介绍了近年来不确定度评定的研究热点:蒙特卡罗方法(Monte Carlo Method,MCM),不确定度评定的来源、评定概念、评估方法及其发展过程,扩大了测量不确定度评定与表示的适用范围。     

微量钙的测定方法研究进展

介绍了1995-2006年期间测定微量和痕量钙的方法,如电感耦合等离子体-原子发射光谱法、原子吸收光谱法以及离子色谱法等的工作原理和特点,并说明了其测定微量钙的应用领域。并对微量钙的测定技术进行了展望(引用文献55篇)。