SnO2纳米棒的生长过程、发光性能及光催化活性

在柠檬酸的调控下,采用水热法合成SnO_2纳米棒。利用高分辨透射电子显微镜、X射线衍射、傅里叶变换红外光谱、Brunauer-Emmett-Teller氮吸附、紫外可见漫反射光谱和光致发光光谱研究了SnO_2样品在生长过程中的结构特征。结果表明,SnO_2纳米晶体的生长可进一步分为2个阶段:早期SnO_2纳米晶遵循定向附着模式生长,而后期采取Ostwald熟化模式沿[001]方向缓慢生长。SnO_2纳米粒子在不同阶段的光致发光性能和光催化活性显示:在晶体的生长过程中,这2种性能变化趋势几乎相似,即生长前期性能迅速增加,随后性能逐渐降低。     

Ag2S或CuS掺杂的Zn0.5Cd0.5S纳米晶体：溶剂热法合成及光致发光性能

以异丙醇为溶剂,醇热法制备Zn_0.5Cd_0.5S和Ag₂S或CuS掺杂的Zn_0.5Cd_0.5S纳米晶体,考察了这些纳米晶体在可见光区域的光致发光性能。结果表明,反应温度和反应时间、掺杂剂的浓度和种类对Zn_0.5Cd_0.5S的发光性能有很大的影响,相比未掺杂Zn_0.5Cd_0.5S纳米晶体而言,Ag₂S或CuS掺杂后其光致发光强度明显增强、半高宽更宽。     

PEG辅助氧化锌纳米棒的水热法制备

采用PEG辅助水热法合成了ZnO纳米棒,XRD显示产物为结晶良好的六角结构晶体ZnO,PL谱表明适当退火处理后产物有较好的光致发光性能.利用TEM和SAED研究了纳米棒的形貌和生长机制,并研究了氢氧化钠浓度和反应时间对产物形态和尺寸的影响.     

离子交换膜中CdS单分散纳米晶的合成及其光学性质

以硫代乙酰胺(TAA)为前驱体, 采用液相反应在全氟磺酸离子交换膜(Nafion)中自组装得到了均匀分布、单分散的纳米CdS晶体；与文献报道的前驱体如Na₂S和H₂S不同, TAA可以在全氟磺酸离子膜中均匀扩散, 最终在Nafion薄膜中得到均匀分布的纳米CdS晶体. 利用高分辨电子显微镜(HRTEM)、X射线衍射仪(XRD)和能量散射X射线分析(EDXA)研究了Nafion薄膜模板中CdS纳米晶体的形成机理、晶粒大小和分布；采用紫外- 可见吸收光谱和荧光光谱分析了Nafion薄膜中单分散纳米CdS晶体的光学性质. 结果表明, 随CdS纳米晶体尺寸的减小, 量子尺寸效应明显增强；在紫外吸收谱中表现为吸收边明显蓝移, 而在光致发光谱中, 表现为带边发射的蓝移.     

简易、可控制备硫化铅纳米带

以硝酸铅和硫代乙酰胺为前体,十二烷基苯磺酸钠（SDBS）扮演了前体和表面活性剂的双重角色,制备出硫化铅纳米带。 采用透射电子显微镜、X射线衍射和光致发光对所制备的纳米带进行了表征。 结果表明,中间产物PbSO4在水热条件下对PbS纳米带的进一步形成主要起到模板作用。 进一步考察了纳米带形成机理,结果表明,中间产物PbSO4对表面活性剂是有制约性的,而当改变中间产物保持条件不变的情况下,模板效应失控,只能得到不规则的微晶体。 实验结果表明,制备硫化铅纳米带反应速度较为缓慢,易于控制,为制备不同形貌纳米带提供了一种有效方法。     

Au@ZIF-8核壳结构中金纳米粒子分布的调控及其在荧光分子光致发光传感中的应用

控制金属@MOF核壳纳米结构中金属纳米粒子的分布不容易实现。我们应用了合成MOF胶体粒子所用到的配位调制方法来合成Au@ZIF-8核壳纳米结构。通过使用过量的2-甲基咪唑和不同用量的1-甲基咪唑可获得不同的Au@ZIF-8。该合成方法可在ZIF-8纳米晶体中灵活调整Au纳米粒子（Au NPs）的分布。此外,我们分别研究了2种不同尺寸的荧光分子与Au@ZIF-8结合后的光致发光光谱和寿命。ZIF-8的孔径可以决定这2种分子是否可通过多孔壳结构接近Au NPs。分子光学特性对Au NPs近场的发光增强和荧光猝灭的竞争非常敏感。     

水热合成CdS纳米晶体的形貌控制研究

研究了水热合成CdS纳米晶体形貌的化学控制，选择不同的络合试剂为模板,研究其对水热合成CdS纳米晶体形貌的影响.实验发现若以络合试剂乙二胺、甲胺为模板时，产品CdS晶体的形貌分别为（20～30） nm×（200～600） nm和（40～50） nm×（200～600） nm尺寸的纳米棒;而以络合试剂吡啶、 氨为模板时，产品CdS晶体的形貌分别为平均尺寸约30 nm和20 nm的纳米颗粒.用XRD、TEM、XPS、PL和Raman光谱等技术对所得CdS纳米棒进行了表征.同时对水热合成CdS纳米晶体形貌的模板控制机制进行了探讨，提出了一种水热合成CdS纳米棒的络合物结构诱导生长机理.     

La0．5Nao．5TiO3纳米晶的制备及光致发光研究

以硬脂酸、硝酸镧、氢氧化钠和钛酸四丁酯为原料制备了La0．5Nao．5TiO3纳米晶，粒度最小可达14nm，烧成温度为500℃，低于传统固相反应的合成温度。光致发光研究表明：用392nm光作激发光，在室温下观察到了一个强的蓝光发射带，并且它的强度和半宽度随粒度发生明显变化。     

Pd纳米晶的调控合成及其在燃料电池中的应用

贵金属Pd纳米晶体的催化性能与其表面结构有着密切联系。基于目前Pd多面体纳米晶体可控合成技术的发展,Pd纳米晶体催化性能的进一步优化及其在催化领域的应用前景依然广阔。本文主要阐述了关于Pd多面体纳米晶的制备及其作为电催化剂在燃料电池中应用的最新研究进展。在介绍纳米晶体的生长机理及其表面结构与晶体形状的关系之后,重点描述了Pd多面体纳米晶体常见的几种制备方法,概述了Pd多面体纳米晶体作为催化剂在燃料电池阴极和阳极中的应用。最后总结展望了Pd多面体纳米晶体作为催化剂的研究方向及其发展前景。     

纳米TiO2的光致发光性能与SERS效应的关系

以采用溶胶-水热法制备的纯TiO₂及Zn掺杂的TiO₂纳米粒子作为SERS活性基底, 研究了其光致发光机制及其与表面增强拉曼散射(SERS)性能的关系. 结果表明, TiO₂纳米粒子的表面缺陷和氧空位等表面性质在其光致发光和增强拉曼散射性能中发挥着重要的作用. 在表面缺陷和氧空位含量较低时, TiO₂纳米粒子的光致发光光谱(PL)信号越强, 其SERS性能就越高; 当TiO₂纳米粒子的表面缺陷和氧空位含量达到一定程度时, TiO₂纳米粒子的PL信号越弱, 其SERS性能越高.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.