A fire-assay and wet chemical method for the determination of palladium, platinum, gold, and silver in ores and concentrates

A method is presented for the determination of palladium, platinum, gold and silver in ores and concentrates by a fire-assay and wet chemical technique. After parting of the lead assay button with dilute nitric acid, and separation of the solution from the residue, the palladium and platinum in the solution are precipitated by the addition of stannous chloride, with tellurium as collector. The resulting precipitate is combined with the gold residue and dissolved in aqua regia, then the solution is analysed for palladium, platinum and gold by atomic-absorption spectrophotometry (AAS). Silver is determined in the original solution by AAS before the reduction step.     

火试金重量法与AAS湿法结合测定砂金矿中金的含量

砂金矿中二氧化硅和金的含量较高,本文用传统的火试金重量法与AAS湿法相结合来测定砂金矿中的金含量,用以得到较为精确的结果。本文用科学的配料方法,调节好熔渣的硅酸度,得到品质更好的熔渣与铅扣。再通过二次补正收集分散在熔渣中的金,之后进行三次补正收集灰皿中残留的金含量,然后用原子吸收光谱—AAS湿法测定三次补正得到的金银合粒与分金液中金的含量,从而得到更精确的结果。此方法操作简便、适用性广、精密度与准确度较高。通过加标测试此方法金的回收率在99.2%～100.3% 之间,金的相对标准偏差(RSD)在0.24%～0.6%之间。     

The indirect determination of organic compounds by atomic absorption spectrometry

The feasibility of determining indirectly certain organic compounds by precipitation of insoluble silver compounds and determining the excess silver(I) by atomic absorption spectrometry (AAS) has been demonstrated. The determination of other compounds, such as alkylated barbiturates and mercaptans by similar methodology should be possible. Although direct AAS methods are preferable to indirect methods, the insolubility of many silver salts, the inherent sensitivity of the AAS method for silver, and the speed and convenience of AAS methodology suggests that under certain conditions, an indirect AAS method may be appropriate and the method of choice.     

A rapid fire-assay/atomic-absorption method for the determination of platinum, palladium and gold in ores and concentrates: A modification of the tin-collection scheme

The tin-collection scheme of fire-assaying has been simplified to permit the rapid and accurate determination of platinum, palladium and gold in ores and related materials. The presence of tellurium in the charge ensures that the precious metals remain insoluble during the parting of the tin button with hydrochloric acid. The residue is easily collected and dissolved and the resultant solution analysed for the precious metals by AAS. The accuracy of the method has been established by application to five diverse certified reference materials.     

火试金法测定铅冶炼渣中的金、银含量

建立了铅冶炼渣中的金银含量的测定方法,采用火试金法富集铅冶炼渣中的金、银,铅扣经灰吹后,形成金银合粒,合粒中除有金银外,还残留微量的铅铋杂质,合粒经硝酸分金后,实现金银分离,得到金粒和分金溶液。合粒中杂质保留在分金溶液中,分金溶液经酸处理,采用电感耦合等离子体发射光谱(ICP-OES)法测定其中杂质量和微量的金量。金粒质量补正分金溶液中微量金量即为样品中的金量,合粒质量减去金粒质量和杂质量即为银量。ICP-OES法测定杂质解决了合粒中铅铋残留和分金失误造成微量金进入分金溶液现象。方法精密度较好,加标回收率分别为银98.6%～100%,金96.2%～102%。方法准确、方便、快捷,能很好地满足铅冶炼渣中金、银含量的测定。     

Preconcentration of traces of gold, silver and palladium on activated carbon and its determination in geological samples by flame AAS after wet ashing

A simple, rapid and cost effective preconcentration method is described for the determination of traces of gold (Au), silver (Ag) and palladium (Pd) in geological samples by flame atomic absorption spectrophotometry (AAS). The method is based on sorption of analytes (Au, Ag and Pd) on powdered activated carbon (AC) at pH 1 in hydrochloric acid (HCl) medium. The samples are decomposed by aqua regia — HCl treatment. The quantitative sorption (better than 92%) of analytes is obtained on AC (in absence of complexing agent), by simply manipulating optimal conditions. The unique feature of the method is, the analytes are recovered quantitatively from AC by oxidizing and completely solubilising the carbon using concentrated nitric acid (HNO₃) and perchloric acid (HClO₄) i.e. by wet ashing. The method of wet ashing has several advantages over conventional dry ashing. The accuracy of the method is evaluated by analysing, five Canada centre for mineral and energy technology (CANMET) standards; MA-3, MA-1b, FER-1, SU-1A, and CPB-1. In addition, ASK-3 and one inhouse standard, kolar gold field (KGF) samples was also analysed. As no standard for Pd is available, its accuracy was evaluated by standard addition method. The method was applied on numerous geological samples for the determination of Au, Ag and Pd down to 0.1 ppm (based on 10 g sample) within ±10% R.S.D. (n=5). The method could easily be adopted by any laboratory as the inputs are minimal (AC), inexpensive and easily available.     

火试金法测定铅冶炼渣中的金、银含量

建立了铅冶炼渣中的金银含量的测定方法,采用火试金法富集铅冶炼渣中的金、银,铅扣经灰吹后,形成金银合粒,合粒中除有金银外,还残留微量的铅铋杂质,合粒经硝酸分金后,实现金银分离,得到金粒和分金溶液。合粒中杂质保留在分金溶液中,分金溶液经酸处理,采用电感耦合等离子体发射光谱(ICP-OES)法测定其中杂质量和微量的金量。金粒质量补正分金溶液中微量金量即为样品中的金量,合粒质量减去金粒质量和杂质量即为银量。ICP-OES法测定杂质解决了合粒中铅铋残留和分金失误造成微量金进入分金溶液现象。方法精密度较好,加标回收率分别为银98.6%～100%,金96.2%～102%。方法准确、方便、快捷,能很好地满足铅冶炼渣中金、银含量的测定。     

探针-石墨炉原子吸收光谱法测定岩石矿物中的金

本文采用自制探针系统对探针-石墨炉原子吸收光谱法测金的性能,探针系统的制作,探针的处理,探针原子化法的检测限,灵敏度及抗干扰能力进行了详细的研究,探针原子化的各项指标均优于常规的管壁原子化法。采用本法可不必分离基体物质,直接测定地质样品中的金,所得结果与萃取原子吸收法的结果相吻合。     

Indirect Atomic Absorption Spectrometric Determination of Ammonia,Thiosulfate and Cyanide in an Unsegmented Flow System

Abstract

A flow injection analysis method (FIA), has been developed for the determination of cyanide, thiosulfate and ammonia by atomic absorption spectrometry (AAS). Aqueous solution of the analyte was injected into an on-line column containing glass beads and packed with silver chloride and deionized water was used as the carrier. The analyte dissolves the silver chloride and the dissolved silver complex is introduced to the nebulizer of the AAS. This method has proved to be sensitive, simple and precise. Detection limits of 1.0 × 10^?7 M, 5.0×10^?7 M and 5.0x10^?6M were obtained for thiosulfate, cyanide and ammonia, respectively. The precision of the technique was 2.0%, 2.4% and 1.4% in case of thiosulfate, cyanide and ammonia, respectively. The effects of flow rate and sample volume on the FIA/AAS signals are presented.     

乙酸除铋火试金法测定粗铋中的金银含量

建立了用乙酸分离粗铋中铋-火试金重量法测定粗铋中金和银含量的方法。首先把粗铋焙烧氧化,然后用乙酸溶解粗铋的氧化物,过滤除去铋,消除铋对火试金法的干扰,将沉淀物灰化后,配料、高温熔融,熔态的金属铅捕集试样中的贵金属形成铅扣,将铅扣灰吹,得到金银合粒,用硝酸溶解分离金,用重量法测定金含量。方法准确度高,精密度好,金的加标回收率为99.2%～101%,银的加标回收率为98.2%～99.7%。能很好地满足粗铋中金、银的测定。     

Use of dicyclohexano-18-crown-6 to separate traces of silver(I) from potassium thiocyanate in hydrochloric acid media,and determination of the silver by atomic absorption spectrometry

Solvent extraction with 0.05 mol L(-1) dicyclohexano-18-crown-6 (DC18C6) in 1,2-dichloroethane, coupled with flame atomic absorption spectrometry (AAS), has been investigated as a new method for separation of trace amounts of silver(I) from 0.05 mol L(-1) potassium thiocyanate in 1.0 mol L(-1) hydrochloric acid media and quantification of the amount of silver present. The method is based on the formation of an extractable ion-association product, [DC18C6.K](+)[Ag(SCN)(2)](-), with a metal-to-crown ether ratio of 1:1 (as derived from slope analysis data). Stripping of the extracted silver(I) in the 1,2-dichloroethane phase was achieved within 5 min by use of 3.0 mol L(-1) potassium thiocyanate. Reducing the concentration of acid in the sample solution to 0.1 mol L(-1) improved the preconcentration factor severalfold. Excellent tolerance of the proposed method to the presence of foreign ions in solution with silver(I) was demonstrated. A detection limit of 13 ng mL(-1) was derived from the mean value of the blank plus three times its standard deviation. The method was used to determine traces of silver(I) after separation from gold(III), platinum(IV), and palladium(II) matrices on the basis of extractability differences with 18-membered crown ethers under specified conditions. The efficiency of the adopted ion-association mechanism for silver(I) extraction was apparent from the average recovery of 96% for spiked standards by use of the back-washing technique. The proposed extraction procedure was applied to the determination of traces of silver(I) in a selection of chemical reagents.     

Enrichment of trace amounts of gold, silver, palladium and platinum by precipitate flotation

Summary An organic precipitant, p-dimethylaminobenzilidenerhodanine (DABR), is used as the gatherer in precipitate flotation to enrich trace amounts of gold, silver, palladium and platinum from acidic media in the presence of surfactants. The DABR dissolved in dimethylformamide (DMF) does not affect the determination of the enriched metals with electrothermal atomic absorption spectrometry. The presence of a 10²- to 10⁴-fold excess of other usual ions does not interfere with the flotation owing to the high selectivity of DABR for the noble metals in acidic media. As little as 1 ng/l of gold in aqueous solution can thus be determined by AAS. The method has been applied to determine the noble metals in various ore samples with satisfactory results.Dedicated to Prof. Kuang Lu Cheng, University of Missouri, Kansas City, USA on the occasion of his 70th birthdayPresented in part at the Third China-Japan Joint Symposium on Analytical Chemistry, Hefei, China, May, 1988     

Analytical applications of crown ethers : IV. Extraction and determination of gold

A method for determination of gold at low concentrations by flame and nonflame AAS is described. After the pretreatment and decomposition of the samples gold is extracted with MIBK containing dicyclohexyl-18-crown-6. The extract is aspirated into a flame or injected into a graphite furnace. Various interferences are examined and the precision of the method is evaluated.     

In situ synthesis of water dispersible bovine serum albumin capped gold and silver nanoparticles and their cytocompatibility studies

A simple and convenient one step room temperature method is described for the synthesis of bovine serum albumin (BSA) capped gold and silver nanoparticles. BSA reduces silver ions to silver nanoparticles but does not directly reduce gold ions to gold nanoparticles at room temperature and varying pH conditions. However, when silver and gold ions are simultaneously added to BSA, silver ions get reduced to metallic silver first and these in turn reduce gold ions to gold nanoparticles through a galvanic exchange reaction. The so synthesized silver and gold nanoparticles are easily water dispersible and can withstand addition of salt even at high concentrations. It is shown that the capped protein retains its secondary structure and the helicity to a large extent on the nanoparticles surface and that the protein capping makes the nanoparticles cytocompatible.     

Aqueous-organic phase-transfer of highly stable gold, silver, and platinum nanoparticles and new route for fabrication of gold nanofilms at the oil/water interface and on solid supports

A simple but effective aqueous-organic phase-transfer method for gold, silver, and platinum nanoparticles was developed on the basis of the decrease of the PVP's solubility in water with the temperature increase. The present method is superior in the transfer efficiency of highly stable nanoparticles to the common phase-transfer methods. The gold, silver, and platinum nanoparticles transferred to the 1-butanol phase dispersed well, especially silver and platinum particles almost kept the previous particle size. Electrochemical synthesis of gold nanoparticles in an oil-water system was achieved by controlling the reaction temperature at 80 degrees C, which provides great conveniences for collecting metal particles at the oil/water interface and especially for fabricating dense metal nanoparticle films. A technique to fabricate gold nanofilms on solid supports was also established. The shapes and sizes of gold nanoparticles as the building blocks may be controllable through changing reaction conditions.     

硫酸分离–火试金重量法测定碲化铜中的金和银

建立了用硫酸分离-火试金重量法测定碲化铜中的金和银含量的方法。用硫酸溶解碲化铜样品,过滤,除去铜和碲,得到含金、银的沉淀物,沉淀物经灰化、配料、高温熔融制得铅扣。将铅扣灰吹,得到金银合粒,用硝酸溶解分离金,用重量法测定金含量。用金银合粒的质量扣除金粒的质量和分金液、洗液中杂质的质量即为银含量。采用灰皿、残渣熔融法补正,或用含碲、铜物料做基体加入纯金、纯银同试样方法测定,根据金、银的回收率加以补正,从而得到试样中的碲含量。实验结果表明,浓硫酸的加入量为30 mL,残余量应不少于15 mL。火试金中硅酸度为1左右,试样进炉温度以900℃为宜。该方法金、银测定结果的相对标准偏差分别为0.33%~1.97%,0.28%~1.27%(n=9)。金的回收率为98.5%~100.2%,银的回收率为95.5%~101.4%。该法满足生产控制检测和贸易结算的要求。     

Determination of trace amounts of gold and silver in high-purity iron and steel by electrothermal atomic absorption spectrometry after reductive coprecipitation

Trace amounts of gold and silver in high-purity iron or steel were preconcentrated by reductive coprecipitation with palladium using ascorbic acid, and determined by electrothermal atomic absorption spectrometry (ET-AAS). Both gold and silver could be simultaneously separated and sensitively determined in 10 metals (aluminum, cobalt, chromium, copper, iron, manganese, molybdenum, nickel, vanadium and zinc). Comparable values were obtained for gold and silver in reference materials (low alloy steel) by the proposed method and a non-separation method; good agreement was found between the analytical values by both methods and the certified values. The proposed method is easy, simple and not dependent on sample composition and content. Moreover, gold and silver in metal samples could be simultaneously separated together with selenium and tellurium. The detection limits for gold and silver (3 σ) are 0.003 μg g^–1 and 0.002 μg g^–1, respectively. Received: 3 February 2000 / Revised: 11 April 2000 / Accepted: 16 April 2000     

Determination of trace amounts of gold and silver in high-purity iron and steel by electrothermal atomic absorption spectrometry after reductive coprecipitation

Trace amounts of gold and silver in high-purity iron or steel were preconcentrated by reductive coprecipitation with palladium using ascorbic acid, and determined by electrothermal atomic absorption spectrometry (ET-AAS). Both gold and silver could be simultaneously separated and sensitively determined in 10 metals (aluminum, cobalt, chromium, copper, iron, manganese, molybdenum, nickel, vanadium and zinc). Comparable values were obtained for gold and silver in reference materials (low alloy steel) by the proposed method and a non-separation method; good agreement was found between the analytical values by both methods and the certified values. The proposed method is easy, simple and not dependent on sample composition and content. Moreover, gold and silver in metal samples could be simultaneously separated together with selenium and tellurium. The detection limits for gold and silver (3 σ) are 0.003 μg g^–1 and 0.002 μg g^–1, respectively. Received: 3 February 2000 / Revised: 11 April 2000 / Accepted: 16 April 2000     

火试金减杂-电感耦合等离子体原子发射光谱法（ICP-AES）法测定高冰镍的金、银、铂、钯含量

建立了火试金减杂-电感耦合等离子体原子发射光谱法（ICP-AES）测定高冰镍中金、银、铂、钯含量的分析方法。实验采用火试金富集、熔融、灰吹得到合粒,通过减杂法得到银含量,通过ICP-AES法测定得到金、铂、钯含量。金、银、铂、钯的加标回收率在99.53%-101.83%之间,相对标准偏差小于3%。此方法快速、简洁,准确度高、精密度好,能够满足高冰镍的测定需求。     

Voltammetry using a dental amalgam electrode for heavy metal monitoring of wines and spirits

We have introduced a non-toxic electrode material similar to dental amalgam for use in voltammetry. Its electrochemical properties are like a silver electrode. However, it possesses a higher overvoltage towards hydrogen than silver, and therefore enables detection of metals like zinc, nickel and cobalt. As such solid electrodes are found to give stable results over several weeks, without any maintenance, and because this method greatly facilitates monitoring of heavy metals, attempts to apply such methods to various samples have been are carried out. The present paper deals with the determination of zinc and lead at nanogram per milliliter levels in wines and spirits with only minor treatment of the samples. The procedure may easily be adapted to continuous monitoring.We have previously found that audible sound may greatly increase the voltammetric signal using liquid mercury as well as silver as electrode material. This is also applied to the actual systems.Finally, model determinations of thallium in brandy with the dental amalgam electrode are compared with atomic absorption spectrometric (AAS) measurements. It was found that the electrode could be used repeatedly, without fouling, and with results close to those found by the AAS method.