聚苯胺盐在无溶剂条件下有效催化羰基保护反应

合成了自掺杂聚苯胺盐PABSA,并成功应用于醛和乙酸酐的缩醛化反应,发现此聚苯胺盐催化剂具有高效、可回收等特性。同时,利用二元醇作为保护基团,醛也可以转化成相应的缩醛。考察了反应时间、温度和催化剂用量对反应的影响,并通过IR、1H NMR、13C NMR和元素分析对部分产物进行了结构表征。     

导电聚苯胺的合成、结构、性能和应用

概述了中国科学院长春应用化学研究所对导电聚苯胺合成、结构、性能和应用的研究.从合成可溶性的聚苯胺入手,阐明了聚苯胺的若干基本化学和结构问题,提出并证明了掺杂态聚苯胺的结构模型和掺杂机理;除了质子酸掺杂外,发现了聚苯胺的碘氧化掺杂、光助氧化掺杂和K+注入还原掺杂;开发了分别以环氧树脂和聚氨酯为载体的聚苯胺防腐涂料;运用掺杂剂诱导的溶解性,通过合成带聚乙二醇链的膦酸掺杂剂,实现了导电态聚苯胺的水体系加工.其中的聚苯胺树脂及防腐涂料的生产技术,已经完成中试,正在走向产业化.     

多金属氧酸盐掺杂聚苯胺电子聚合物——多金属氧酸盐与HCl共掺杂聚苯胺HCl-SiW11Co/Pan的合成及其性质

多金属氧酸盐掺杂聚苯胺电子聚合物——多金属氧酸盐与HCl共掺杂聚苯胺HCl-SiW11Co/Pan的合成及其性质;聚苯胺;多金属氧酸盐;掺杂;光电磁性质     

XPS研究聚苯胺的竞争掺杂行为

采用X射线光电子能谱（XPS）方法对不同反应体系下化学合成的聚苯胺（PANI）的结构和掺杂状况进行了研究。发现盐酸（HCl）掺杂的聚苯胺在样品后处理过程中易发生脱掺杂行为;在十二烷基苯磺酸钠（SDBS）和盐酸共存体系下合成聚苯胺时,对阴离子DBS-和Cl-发生竞争掺杂行为。结果表明DBS-与带正电荷聚苯胺链结合,起到了掺杂和诱导聚苯胺可溶性的作用,它的N1s和S2p谱图与单独采用十二烷基苯磺酸（DBSA）掺杂聚苯胺的谱图相似。但SDBS-HCl复合体系比单独采用DBSA体系更为有利。     

掺杂态聚苯胺的性能及其防腐应用研究进展

聚苯胺具有良好的导电性和独特的掺杂-解掺杂特性,成为近年来备受关注的导电高分子材料,其特有的抗划伤、抗点蚀和钝化性能使其在金属防腐领域拥有巨大的应用前景。聚苯胺结构中苯环的存在,使得其分子链具有较大刚性,而分子间氢键又导致其难溶、难熔、可加工性能较差,严重制约了聚苯胺的应用。掺杂过程能有效改善聚苯胺的某些性能,或赋予其新的功能,扩展聚苯胺的应用。本文综述了聚苯胺的掺杂方式、掺杂机理、聚苯胺防腐材料的制备方法,以及其在金属防腐领域的应用,展望了聚苯胺的研究和应用前景。     

CuCl2掺杂聚苯胺催化合成苯甲醛1,2-丙二醇缩醛

缩醛是一类重要化合物,具有原料来源丰富、生产工艺简单、化学性质稳定等优点,近20年来作为新型香料在日用香精和食品香精中均有广泛应用[1-2]。根据酸催化机理,Lewis酸可增强羰基碳的正电性,有利亲核试剂的进攻。研究表明,不少无机盐都是这类反应的高效、高选择性的催化剂,又因为无机盐价廉、易得等优点,所以用其作为催化剂具有更加重要的实际意义。聚苯胺(PAn)以其独特的掺杂现象及良好的稳定性为催化载体的选择提供了新的途径[3-4]。若以PAn为载体,将具有催化活性的路易斯酸掺杂其中,可降低路易斯酸的流失量,并克服其易潮解、腐蚀设备…     

掺杂聚苯胺能带结构和导电机理的研究

用EHMO-CO方法对质子掺杂聚苯胺进行了模型化理论计算,得到与吸收光谱实验数据一致的能带结构,研究表明,掺杂苯胺中的载流子是极化子,能满意地解释掺杂聚苯胺的导电机制。     

复合酸掺杂导电聚苯胺的合成及性能

采用复合酸掺杂微乳液法合成导电聚苯胺. 探讨了反应温度和掺杂剂质量比对聚苯胺性能的影响,并通过四探针、塔菲尔曲线、激光粒度分析、热重分析以及红外光谱测试技术,对聚苯胺进行了研究与表征. 结果表明,当聚合温度为15 ℃、磺基水杨酸和十二烷基苯磺酸钠的质量比为2.5∶1时,掺杂态聚苯胺电导率和溶解度达到最大值,同时具有良好的防腐蚀能力;其中电导率可达11 S/cm,在氮甲基吡咯烷酮(NMP)中溶解度可达85%;经电化学工作站测试的塔菲尔曲线可知,其腐蚀电位为-0.391 V. 热重分析表明,复合酸掺杂聚苯胺热分解温度约为440 ℃;粒径分析表明,约有90%的聚苯胺颗粒集中在50～100 nm之间.红外光谱表明,复合酸掺杂聚苯胺各主要吸收峰均向低频方向移动,说明掺杂的有效性.     

新型质子酸掺杂聚苯胺的合成及其电化学电容行为

用化学氧化聚合法制得了草酸掺杂聚苯胺(H2C2O4-PANI)和柠檬酸掺杂聚苯胺(C6H8O7-PANI),并与盐酸掺杂聚苯胺(HCl-PANI)做了对比研究.用红外光谱(FT-IR)、X射线衍射(XRD)和透射电镜(TEM)对掺杂聚苯胺的结构和形貌进行了表征.用循环伏安,恒流充放电和交流阻抗测试对材料在1 mol/L HCl溶液中的电化学电容行为进行了研究.结果表明:3种酸掺杂的聚苯胺具有不同的空间结构,电化学性能也有差异.与盐酸和柠檬酸掺杂的聚苯胺相比,草酸掺杂制备的聚苯胺表现出更优良的电化学电容行为,单电极比电容可达670 F/g.     

掺杂条件对聚苯胺膜导电性能影响的研究

采用对甲基苯磺酸和磺基水杨酸作掺杂剂，对聚苯胺自支撑膜进行了掺杂研究，考查了掺杂时间，温度以及掺杂溶液浓度对其导电性的影响，并用红外光谱及显色反应对掺杂产物进行了表征。结果表明，掺杂温度对聚苯胺膜电导率的影响较大，通过控制温度，可以制备出电导率达盐酸掺杂水平的导电膜，即－１０＾３Ｓ．ｍ＾－１，且具有良好的环境稳定性，在空气中放置一年，其电导率基本保持不变。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.