La2Ti6O15-CeTi21O38-PbTiO3 ceramics formed in gaseous penetration of La-Ce into PbTiO3 and their electric properties

The gaseous penetration of La-Ce into PbTiO₃ ceramics is reported. The compounds of La₂Ti₆O₁₅ and CeTi₂₁O₃₈ are formed and the new La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃ ceramics are prepared by the penetration of La and Ce in the gaseous state. The new ceramic materials have a significant change in electric properties. The room temperature resistivity decreases from 2.0×10¹⁰ to 0.248 Ω. m, and the grain resistance exhibits an obvious PTCR effect with the change of temperature. However, the grain boundary resistance decreases rapidly with increase in temperature. The change rule of the total resistance is similar to that of the grain boundary, and the PTCR effect disappears and the tendency of transition to a conductive body is manifest. The XPS analysis suggests that the particles that are Pb, Ti, La and Ce in La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃ ceramics all change their valence and lead to decreasing resistivity, and the bound energy peak values of elements in La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃ ceramics are also reported. The La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃ ceramics have a better thermal stability in high temperatures through TG-DTA analysis.     

稀土气相扩渗BaTiO3基PTC陶瓷的NTCR效应

采用稀土气相扩渗法制备了La改性的BaTiO3基PTC陶瓷,并对其室温电阻率的变化及温-阻效应进行了研究.结果表明,BaTiO3基PTC陶瓷经La气相扩渗后,室温电阻率从2.7×109Ω.m下降到220Ω.m,在25-500℃范围内,电阻率随温度升高单调递减,从220Ω.m降至5.8Ω.m,产生了明显的NTCR效应.结合XRD,SEM,EDAX以及介电性能测试结果分析了La气相扩渗BaTiO3基PTC陶瓷NTCR效应的形成机理,建立了NTCR效应的物理结构模型.     

Ce掺杂K_2La_2Ti_3O_(10)催化剂的可见光高效催化制氢的研究

采用高温固相法合成了铈掺杂的K2La2Ti3O10催化剂,利用X射线衍射(XRD)、紫外-可见漫反射(UV-visDRS)、透射电镜(TEM)和X射线光电子能谱(XPS)对催化剂进行了表征.考察了催化剂的可见光催化分解甲醇水溶液制氢的活性,并对可见光催化机理进行了分析.研究表明,铈的掺杂没有改变K2La2Ti3O10的微晶结构,并使催化剂粒径有所减小.紫外可见漫反射分析表明禁带宽度为2.3eV左右,对可见光具有较高吸收.XPS表明La和Ti为+3和+4价,而Ce则是+3和+4的混合价态.担载2wt%Pt后,在可见光下光催化活性大大提高,当铈的掺杂量为0.5mol%(即Ce取代La的摩尔百分量)时,光催化活性达到最大,产氢速率为0.05mmol/h;光照5h后产氢量为0.22mmol,而纯K2La2Ti3O10的产氢量只有0.037mmol.     

类钙钛矿新铌酸盐Ba3La2Ti2Nb2O15的合成、结构与介电特性

为满足现代通信技术的小型化、集成化与高可靠性的迫切要求,探索具有高介电常数、低介电损耗与低温度系数的微波介电材料引起了材料科学、化学、物理和电子学等领域科学工作者的广泛关注,并已开发出复合钙钛矿结构[Ba(Zn1/3Ta2/3)O3]和钨青铜结构[Ba6-3xLn8+2xTi18O54]等实用化的高性.     

Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8材料的制备及在三效催化剂中的应用

采用共沉淀法制备了Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8(0≤x≤0.4)材料, 并对所制备的材料进行了X射线衍射(XRD)和X射线光电子能谱(XPS)的表征, 测定了材料的比表面积(BET法)和储氧量(OSC), 同时采用氢气程序升温还原(H2-TPR)和氨气程序升温脱附(NH3-TPD)研究了材料的还原性能和表面酸性. 研究结果表明, Ce/Ti摩尔比大于1∶2的材料能形成立方萤石结构的固溶体, Ce/Ti摩尔比为1时, 材料表面Ce4+/Ce3+摩尔比达到最大; 随着Ce/Ti摩尔比的增大, 材料的储氧能力先增大后减小, 而TPR还原峰温则是先减小后增大, 当Ce/Ti摩尔比为1时, 材料的储氧量达到最大, 为660 μmol/g; 还原峰峰温最低, 为616 ℃. 以制备的材料为载体制备了一系列Pt/Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8三效催化剂, 并对催化剂进行了活性评价. 活性测试结果表明, 以Ce/Ti比为1的载体材料制成的催化剂对C3H8, CO和NO的起燃温度分别为236, 147和228 ℃, 表现出了优异的温度特性.     

CuO/Ce0.5Ti0.5O2的制备与表征及其对NO+CO反应的催化活性

以Ce0.5Ti0.5O2为载体, 采用浸渍法制备了不同负载量的CuO/Ce0.5Ti0.5O2催化剂, 通过TPR、XRD和激光Raman光谱等技术对其进行了表征, 并在色谱-微反装置上考察了催化剂对NO+CO反应催化性能. 结果表明, CuO/Ce0.5Ti0.5O2催化剂对NO+CO反应的活性与CuO负载量有关; 500 ℃焙烧的催化剂, 当CuO的负载量(w)为22%时, 催化剂的活性最好; 14%CuO/Ce0.5Ti0.5O2在700 ℃焙烧具有最佳催化活性, 这可能与复合载体形成了CeTi2O6的结构有关. TPR结果表明, CuO在Ce0.5Ti0.5O2上出现了四种还原能力不同的物种, α和β峰是载体表面高度分散的CuO物种, γ峰是与Ce0.5Ti0.5O2相互作用较强的孤立CuO晶簇的还原峰, δ峰是载体表面晶相CuO的还原峰; XRD结果表明700 ℃焙烧的样品中已出现了新复合氧化物CeTi2O6的晶相峰, 随焙烧温度的升高, 此晶相峰也变得更加明显, 这说明高温焙烧有利于Ce与Ti发生固相反应而形成CeTi2O6结构; Raman结果表明, 焙烧后的Ce0.5Ti0.5O2并不是简单的TiO2和CeO2的复合, 而是形成了新的晶相结构, 这也进一步验证了CeTi2O6结构的生成.     

Preparation of Pt/K_2La_2Ti_3O_(10) and its photo-catalytic activity for hydrogen evolution from methanol water solution

1 Introduction Conventional energy resources, such as coal, petro-leum products, etc., which are fulfilling most of the world’s energy requirement have been depleted to a great extend. The human being is now facing exhaus-tion of fuel resources in a near…     

Nonlinear electrical grain boundary properties in proton conducting Y-BaZrO3 supporting the space charge depletion model

The overall proton conductivity of polycrystalline acceptor-doped BaZrO(3) is limited by the high resistivity of its grain boundaries. To investigate the nature of the electrical response of the grain boundaries as a function of the DC bias, Y-doped BaZrO(3) ceramics with a very large grain size (up to 200 μm) have been prepared in an infrared image furnace. The grains are so large that even individual grain boundaries can be addressed by microelectrodes. DC voltage-dependent resistance and capacitance of the grain boundaries are discussed in terms of the space charge model. The results corroborate carrier depletion (OH(O)˙, h˙, V(O)˙˙) as origin of the pronounced grain boundary resistance. This picture fits well into the space charge scenario found for various related oxide materials, and leads to strategies for improving grain boundary conductivity.     

CdO掺杂对BaTiO3基半导化陶瓷PTCR效应的改善

钛酸钡基半导化陶瓷中的PTCR效应通常与材料中的施受主掺杂切相关,蒸汽掺杂能够大幅度影响材料的PTCR效应。CdO在高温下具有较高的蒸汽压,是一种适用的蒸汽掺杂剂,研究了CdO以及CdO蒸汽对掺Y^3+的Ba1-xSrxTiO3陶瓷的PTCR效应的影响,结果首次发现了Cd^2+掺杂样品的PTCR效应都有不同程度的提高,采用蒸汽掺杂时,效果更为显著。现有的理论很难解释Cd^2+掺杂能够提高钛酸钡基材料PTCR效应。我们从缺陷化学的角度,分析了Cd^2+在BaTiO3基材料中的行为,推断表明这种现象可能是由于铁电相变时,处于晶界区的Cd^2+在Ba位和Ti位之间转换造成的。     

Studies on the Structure and Properties of Multiphase Al_2O_3 Abrasion-resistant Ceramics

1 INTRODUCTION Due to its high intensity, high hardness, high tem- perature resistance, corrosion resistance and abra- sion resistance, Al2O3 abrasion-resistant ceramic is widely applied in many fields, such as metallurgy, minerals, electric power, building materials and che- mical engineering as grinding medium in the ball grinder. The properties of Al2O3 ceramic are positi- vely correlated to its purity: the higher the purity is, the better the properties of the product are, but cor- r…     

Photocatalytic activity of R3MO7 and R2Ti2O7 (R=Y, Gd, La; M=Nb, Ta) for water splitting into H2 and O2

The photocatalytic activities of R3MO7 and R2Ti2O7 (R=Y, Gd, La; M=Nb, Ta) strongly depended on the crystal structure. Overall, photocatalytic water splitting into H2 and O2 proceeded over La3TaO7 and La3NbO7, which have an orthorhombic weberite structure, Y2Ti2O7 and Gd2Ti2O7, which have a cubic pyrochlore structure, and La2Ti2O7, which has a monoclinic perovskite structure. All of these materials are composed of a network of corner-shared octahedral units of metal cations (TaO6, NbO6, or TiO6); materials without such a network were inactive. The octahedral network certainly increased the mobility of electrons and holes, thereby enhancing photocatalytic activity.     

熔盐法制备Ca0.9La0.2/3Cu3Ti4O12陶瓷粉体及其介电性能研究

以CaCO3,CuO,TiO2,La2O3为反应物,NaCl,KCl为熔盐,通过熔盐法分别在700、750、800、850℃条件下合成Ca0.9La0.2/3Cu3Ti4O12陶瓷粉体。利用XRD和SEM分别对陶瓷粉体的物相结构和微观形貌进行了分析,并对其介电性能进行了测试。实验结果表明,随着合成温度的升高,陶瓷粉体的钙钛矿相含量逐渐增大,与传统固相法相比,熔盐法制备的粉体无团聚现象,耗时少。Ca0.9La0.2/3Cu3Ti4O12粉体制备的陶瓷在1 000℃烧结、测试频率在100 Hz~10 kHz时,获得优良的介电性能:介电常数大大超过104,介电损耗在0.1~0.47之间。     

Reversible cation/anion extraction from K2La2Ti3O10: formation of new layered titanates, KLa2Ti3O9.5 and La2Ti3O9

A new soft-chemical transformation of layered perovskite oxides is described wherein K2O is sequentially extracted from the Ruddlesden-Popper (R-P) phase, K2La2Ti3O10 (I), yielding novel anion-deficient KLa2Ti3O(9.5) (II) and La2Ti3O9 (III). The transformation occurs in topochemical reactions of the R-P phase I with PPh4Br and PBu4Br (Ph = phenyl; Bu = n-butyl). The mechanism involves the elimination of KBr accompanied by decomposition of PR4+ (R = phenyl or n-butyl) that extracts oxygen from the titanate. Analysis of the organic products of decomposition reveals formation of Ph3PO, Ph3P, and Ph-Ph for R = phenyl, and Bu3PO, Bu3P along with butane, butene, and octane for R = butyl. The inorganic oxides II and III crystallize in tetragonal structures (II: P4/mmm, a = 3.8335(1) A, c = 14.334(1) A; III: I4/mmm, a = 3.8565(2) A, c = 24.645(2) A) that are related to the parent R-P phase. II is isotypic with the Dion-Jacobson phase, RbSr2Nb3O10, while III is a unique layered oxide consisting of charge-neutral La2Ti3O9 anion-deficient perovskite sheets stacked one over the other without interlayer cations. Interestingly, both II and III convert back to the parent R-P phase in a reaction with KNO3. While transformations of the R-P phases to other related layered/three-dimensional perovskite oxides in ion-exchange/metathesis/dehydration/reduction reactions are known, the simultaneous and reversible extraction of both cations and anions in the conversions K2La2Ti3O10 right harpoon over left harpoon KLa2Ti3O9.5 right harpoon over left harpoon La2Ti3O9 is reported here for the first time.     

Syntheses and Crystal Structures of Two Cyano-bridged Bimetallic Complexes [Ce(DMSO)4(H2O)3Fe(CN)6]·H2O and [La(DMSO)4(H2O)3Co(CN)6]·H2O (DMSO = Dimethylsulfoxide)

Two new bimetallic cyano-bridged complexes [Ce(DMSO)4(H2O)3Fe(CN)6]·H2O 1 and [La(DMSO)4(H2O)3Co(CN)6]·H2O 2 have been prepared by the ball milling reaction method and structurally characterized by X-ray single-crystal structure analyses. Crystallographic data for 1:C14H32CeFeN6O8S4, Mr = 736.67, monoclinic, space group P21/n, a = 14.952(1), b =13.7276(9), c = 15.392(1) (A), β = 108.288(1)°, V = 2999.6(4) (A)3, Z = 4, Dc= 1.631 g/cm3,μ =2.304 mm-1, F(000) = 1480, R = 0.0593 and wR = 0.1611; and those for 2: C14H32CoLaN6O8S4,Mr=738.54, monoclinic, space group P21/n, a = 14.945(3), b = 13.731(3), c = 15.300(3) (A), β=107.806(1)°, V= 2989.3(11) (A)3, Z = 4, Dc = 1.641 g/cm3,μ = 2.288 mm-1, F(000) = 1480, R =0.0383 and wR = 0.1132. In both complexes the lanthanide ion is eight-coordinated in a square antiprism arrangement, and the Fe(Ⅲ) or Co(Ⅲ) ion in a nearly regular octahedral environment.The [LnM(CN)6(DMSO)4(H2O)3]·H2O (Ln = Ce and M = Fe for 1; Ln = La and M = Co for 2)species are held together via hydrogen bonds by coordinated water molecules, lattice water molecules and nitrogen atoms of cyanide groups to form a three-dimensional framework.     

无气相氧条件下La0.8Sr0.2Fe0.9Co0.1O3钙钛矿氧化物的氧物种直接氧化甲烷

以La0.8Sr0.2Fe0.9CO0.1O3钙钛矿氧化物作氧载体,采用连续流动反应和连续顺序Redox反应考察了氧物种氧化甲烷的反应性能.结果表明,连续流动反应中La0.8Sr0.2Fe0.9CO0.1O3氧化物的氧物种能选择氧化甲烷生成合成气.在适宜的再氧化条件下,通过连续顺序Redox反应实现了La0.8Sr0.2Fe0.9CO0.1O3氧化物的氧物种氧化甲烷连续生成合成气,消耗的氧物种可通过与气相氧反应而得到补充.但随着Redox反应的进行,氧化物的持续供氧性能下降,钙钛矿结构被破坏.     

类钙钛矿新铌酸盐Ba5LaTi2Nb3O18的合成、结构与介电特性

为满足现代通信技术小型化、集成化与高可靠性的迫切要求,探索具有高介电常数、低介电损耗与低温度系数的微波介电材料引起了材料科学、化学、物理和电子科学等领域科学工作者的广泛关注,并已开发出复合钙钛矿结构的Ba(Mg1/3Ta2/3)O3、Ba(Zn1/3Ta2/3)O3和钨青铜结构的Ba6-3xLn8+2x·Ti18O54及Ba2Ti9O20等实用化的高性能材料[1～7].这类材料均由氧八面体共顶连接,而且氧八面体内(B位)、外(A位)阳离子比例等于或略大于1,由此,我们推测在B位与A位阳离子比例略小于1的类钙钛矿结构中也极有可能存在具有优良介电性能的新材料,因此对通式为AnBn-1O3n(n=5,6,7,8)的系列新化合物进行了系统的合成、结构与介电性能研究[8,9].本文报道在BaO-La2O3-TiO2-Nb2O5体系中合成的具有5层类钙钛矿结构的新铌酸盐Ba5LaTi2Nb3O18,发现该材料具有较好的介电性能.     

铈及混合稀土对Fe-36Ni低膨胀合金凝固组织的影响

研究了Ce及混合稀土对Fe-36Ni低膨胀合金凝固组织的影响,结果表明:加Ce或者混合稀土处理后,合金中分别形成了大量高熔点的Ce2O3颗粒和(Ce,La)2O2S复合第二相颗粒,错配度理论计算表明,Ce2O3,Ce2O2S和La2O2S的(0001)面与Fe-36Ni的(100)面分别具有6.21%,5.77%和5.42%的较低错配度,因此Ce2O3和(Ce,La)2O2S可以作为有效的非均质形核核心,使凝固组织的等轴晶比例增加,等轴晶尺寸减小,合金凝固组织得到显著细化。     

Hydrogen production from coke oven gas over LiNi/γ-Al2O3 catalyst modified by rare earth metal oxide in a membrane reactor

The performance of LiNi/r-Al2O3 catalysts modified by rare earth metal oxide (La2O3 or CeO2) packed on BCFNO membrane reactor was discussed for the partial oxidation of methane (POM) in coke oven gas (COG) at 875 ◦C. The NiO/r-Al2O3 catalysts with different amounts of La2O3 and CeO2 were prepared with the same preparation method and under the same condition in order to compare the reaction performance (oxygen permeation, CH4 conversion, H2 and CO selectivity) on the membrane reactor. The results show that the oxygen permeation flux increased significantly with LiNiREOx/r-Al2O3 (RE = La or Ce) catalysts by adding the element of rare earth especially the Ce during the POM in COG. Such as, the Li15wt%CeO29wt%NiO/ -Al2O3 catalyst with an oxygen permeation flux of 24.71 ml·cm−2·min−1 and a high CH4 conversion was obtained in 875 ◦C. The resulted high oxygen permeation flux may be due to the added Ce that inhibited the strong interaction between Ni and Al2O3 to form the NiAl2O4 phase. In addition, the introduction of Ce leads up to an important property of storing and releasing oxygen.     

La2M2O7(M=Ti,Zr)多晶粉末的低温水热合成及表征

低温水热合成是水热化学一个活跃的研究方向,在氧化物粉末的合成方面具有潜在的应用价值.La2M2O7(M=Ti,Zr)陶瓷材料的优良特性使其多晶粉末的合成倍受关注[1,2].     

Electrospinning synthesis and luminescence properties of one-dimensional La(9.33)(SiO4)6O2: Ln3+ (Ln = Ce, Eu, Tb) microfibers

One-dimensional La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) microfibers were fabricated by a simple and cost-effective electrospinning method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) and low voltage cathodoluminescence (CL) as well as kinetic decay were used to characterize the resulting samples. SEM and TEM results indicated that the diameter of the microfibers annealed at 1000 °C for 3 h was 200-245 nm. The microfibers were further composed of fine and closely linked nanoparticles. La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) phosphors showed the characteristic emission of Ce(3+) (5d → 4f), Eu(3+) ((5)D(0)→(7)F(J)) and Tb(3+) ((5)D(3,4)→(7)F(J)) under ultraviolet excitation and low-voltage electron beams (3-5 kV) excitation. An energy transfer from Ce(3+) to Tb(3+) was observed in the La(9.33)(SiO(4))(6)O(2): Ce(3+), Tb(3+) phosphor under ultraviolet excitation and low-voltage electron beam excitation. Luminescence mechanisms were proposed to explain the observed phenomena. Blue, red and green emission can be realized in La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) microfibers by changing the doping ions. So the La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) phosphors have potential applications in full-color field emission displays.