CeO2-MOx（M=La^3＋,Ca^2＋）改性Pd/γ-Al2O3催化甲烷燃烧性能

采用沉积-沉淀法制备了固溶体CeO2-MOx=(M=La3+,Ca2+)改性的Pd/γ-Al2O3催化剂,利用XRD、Raman和XPS对催化剂进行了表征.结果表明,金属(M)离子进入CeO2的晶格,形成CeO2-MOx固溶体,Raman谱上463cm-1处对应于Ce-O键的F2g对称伸缩振动强度降低.其中,样品Pd/γ-Al2O3CeO2-CaO在615 cm-1处出现一小峰,样品Pd/γ-Al2O3-CeO2-La2O3在320cm-1处出现的肩峰,都表明固溶体CeO2-MOx的形成使O2-亚晶格结构对称性降低.XPS分析表明,固溶体改性的Pd/γ-Al2O3催化剂中Pd的3d5/2结合能比正常价态的PdO的结合能高出0.5-0.6 eV,形成了一种高度离子化的.与载体具有强相互作用的Pd物种.催化甲烷燃烧实验证明,固溶体CeO2-MOx(M=La3+,Ca2+)改性的Pd/γ-Al2O3催化剂的低温活性和稳定性均高于未经改性的Pd/γ-Al2O3催化剂和仅用CeO2改性的Pd/γAl2O3催化剂,在空速为50000 h-1时,可使1%CH4-99%空气(体积分数)混合气中甲烷的10%转化温度降至254℃,转化率100%时的转化温度降至340℃.     

助剂调变对CoO／γ-Al2O3催化性能的影响

采用XRD、TPR和催化活性评价等技术,考察了负载型CoO催化剂的表面特征和其对CH4与CO2重整制合成气反应的催化性能.实验结果表明,采用浸渍法和焙烧温度为400℃时制备的11.0%CoO/γ-Al2O3催化剂,在反应温度为750 ℃和空速(GHSV)为2 500 h-1下,对CH4和CO2转化反应具有最佳的催化初活性,而大量的Co3O4晶粒的存在能导致催化剂因积炭而快速失去活性.CaO、MgO和La2O3助剂的添加能有效地改善其催化剂的抗积炭能力和还原性能,CoO/(CaO-γ-Al2O3)催化剂显示出最佳的催化反应稳定性,在750 ℃、GHSV=2 500 h-1、CH4/CO2原料比为1:1下,连续反应100 h催化剂活性较为稳定.CoO/(CaO-γ-Al2O3)和CoO/γ-Al2O3催化剂的表面特性本质上是不相同的.     

Surface Acidity/Basicity and Catalytic Reactivity of CeO2/γ-Al2O3 Catalysts for the Oxidative Dehydrogenation of Ethane with Carbon Dioxide to Ethylene

Dehydrogenation of ethane to ethylene in CO2 was investigated over CeO2/γ-Al2O3 catalysts at 700 ℃ in a conventional flow reactor operating at atmospheric pressure. XRD, BET and microcalorimetric adsorption techniques were used to characterize the structure and surface acidity/basicity of the CeO2/γ-Al2O3 catalysts. The results show that the surface acidity decreased while the surface basicity increased after the addition of CeO2 to γ-Al2O3. Accordingly, the activity of the hydrogenation reaction of CO2 increased, which might be responsible for the enhanced conversion in the dehydrogenation of ethane to ethylene. The highest ethane conversion obtained was about 15% for the 25%CeO2/γ-Al2O3. The selectivity to ethylene was high for all the CeO2, γ-Al2O3 and CeO2/γ-Al2O3 catalysts.     

Selective Oxidation of Toluene with Hydrogen Peroxide Catalyzed by V-Mo-based Catalyst

The selective catalytic oxidation of toluene with hydrogen peroxide over V-Mo-based catalysts under mild conditions was studied.The promotion effect of Mo on the catalysts was studied with V/Al2O3 and Mo/Al2O3 as reference samples.The catalysts were characterized by XRD,TPR,and XPS techniques.The results show that the addition of Mo to V/Al2O3 may change the distribution of V species on Al2O3 surface.Over V-Mo/Al2O3 catalyst,highly dispersed amorphous V species facilitates benzaldehyde formation,and crystalline V2O5 species increases the conversion of toluene but decreases the selectivity to benzaldehyde,while AlVMoO7 species favors both the conversion of toluene and the formation of cresols.The yield of benzaldehyde depends remarkably on the surface O/Al and Mo/V atomic ratios,and gets to a maximum value of 13.2% with a selectivity of 79.5% at an O/Al atomic ratio of 3.0 and Mo/V atomic ratio of 0.7.     

A Novel Way to Prepare γ-Al2O3 Supported SO42-/ZrO2 Solid Superacid Catalysts for n-Butane Isomerization

Highly active solid superacid catalysts for n-butane isomerization, SZ/Al2O3-P, were prepared by supporting SO42-/ZrO2 (SZ) on γ-Al2O3 carrier using a precipitation method.The activities of some catalysts were enhanced significantly.The activity of the most active sample, 60%SZ/Al2O3-P, was even about 2 times more active than that of the SZ catalyst.     

CuO/Mn2O3 /γ-Al2O3催化剂的制备、表征及其在CO氧化反应中的性能研究

采用浸渍法在γ-Al2O3载体上分步负载改性剂Mn2O3和活性组分CuO,制备了一系列不同配比的CuO/Mn2O3/γ-Al2O3催化剂,并运用CO+O2模型反应、XRF、XRD、H2-TPR、in-situ FTIR等手段表征了催化剂的活性和物理化学性质。活性测试结果表明,锰氧化物对γ-Al2O3载体的改性能有效地提高CuO/γ-Al2O3催化剂在CO+O2模型反应中的催化活性。XRD结果表明,锰氧化物对γ-Al2O3载体的改性可以促进氧化铜在载体表面的分散,从而提高了分散态氧化铜的含量,不过这与活性变化的趋势并不完全一致。进一步结合H2-TPR、in-situ FTIR表征结果 ,我们发现,分散态铜、锰氧化物的还原性质也是影响其催化活性的重要因素,催化剂中分散态铜、锰物种越容易被还原,其对CO+O2模型反应的催化活性就越高。     

Complete oxidation of ethanol over vanadium based catalysts

V2O5/γ-Al2O3-TiO2 catalysts were prepared by the mixing sol-gel and co-impregnation method. The performance of the catalysts for complete oxidation of ethanol was performed in a conventional fixed-bed quartz reactor. And the effects of support, preparation methods and vanadium content have been investigated. The results showed that 5% V2O5 catalyst supported on γ-Al2O3-TiO2 possessed the best ethanol conversion under the considered temperature. This may be ascribed to the highly dispersible active component, mutual function between the active component and the carriers. The nature of the best performance for 5%V/γ-Al2O3-TiO2 catalyst may be related to the high V4+ amounts on the surface. And the surface V4+ species may play an important role in the formation of active site for the total ethanol oxidation.     

Environment-friendly synthesis of N-phenylpiperidine from aniline and 1,5-pentanediol over γ-Al2O3 catalyst

An efficient environment-friendly synthesis of N-phenylpiperidine was developed from aniline and 1,5-pentanediol over γ-Al2O3 catalyst under atmospheric pressure. The conversion of 1,5-pentanediol reached 97% and the selectivity for N-phenylpiperidine attained 94%. The structure of the catalyst was characterized by NH3-TPD and BET. The influences of calcination temperature of the catalyst and reaction temperature on activity and selectivity of the catalyst were investigated.     

Study of CO2 Hydrogenation to Methanol over Cu-V/γ-Al2O3 Catalyst

The effect of vanadium addition to CU/γ-Al2O3 catalyst used in the hydrogenation of CO2 to produce methanol was studied. It was found that the catalytic performance of the Cu-based catalyst improved after V addition. The influence of reaction temperature, space velocity and the molar ratio of H2 to CO2 on the performance of 12%Cu-6%V/γ-Al2O3 catalyst were also studied. The results indicated that the best conditions for reaction were as follows: 240℃, 3600 h-1 and a molar ratio of H2 to CO2 of 3:1. The results of XRD and TPR characterization demonstrated that the addition of V enhanced the dispersion of the supported CuO species, which resulted in the enhanced catalytic performance of CU-V/γ-Al2O3 binary catalyst.     

异丁烷脱氢V2O5/γ-Al2O3催化剂的研究

五氧化二钒;异丁烷脱氢V2O5/γ-Al2O3催化剂的研究     

Surface Acidity／Basicity and Catalytic Reactivity of CeO2／γ—A12O3 Catalysts for the Oxidative Dehydrogenation of Ethane with Carbon Dioxide to Ethylene

Dehydrogenation of ethane to ethylene in CO2 was investigated over CeO2/γ-Al2O3 catalysts at 700℃ in a conventional flow reactor operating at atmospheric pressure. XRD, BET and microcalorimetric adsorption techniques were used to characterize the structure and surface acidity/basicity of the CeO2/γ-Al2O3 catalysts. The results show that the surface acidity decreased while the surface basicity increased after the addition of CeO2 to γ-Al2O3. Accordingly, the activity of the hydrogenation reaction of CO2 increased, which might be responsible for the enhanced conversion in the dehydrogenation of ethane to ethylene. The highest ethane conversion obtained was about 15% for the 25?O2/γ-Al2O3. The selectivity to ethylene was high for all the CeO2, γ-Al2O3 and CeO2/γ-Al2O3 catalysts.     

Performance of a tubular oxygen-permeable membrane reactor for partial oxidation of CH4 in coke oven gas to syngas

A gas-tight BaCo0.7Fe0.2Nb0.1O3-δ (BCFNO) tubular membrane was fabricated by hot pressure casting. And a membrane reactor with BCFNO tubular membrane and Ag-based sealant was readily constructed and applied to partial oxidation of CH4 in coke oven gas. At 875 ℃, 95% of methane conversion, 91% of H2 and as high as 10 ml·cm-2·min-1 of oxygen permeation flux were obtained. There was a good match in the coefficient of thermal expansion between Ag-based alloy and BCFNO membrane materials. The tubular BCFNO membrane reactor packed with Ni-based catalysts exhibited not only high activity but also good stability in hydrogen-enriched coke oven gas (COG) atmosphere.     

Oxidative coupling of methane over La-promoted CaO catalysts： Influence of precursors and catalyst preparation method

The oxidative coupling of methane to C2 hydrocarbons has been studied over a series of La-promoted CaO (La/Ca = 0.05) catalysts, prepared using different precursor salts for CaO and La2O3 (viz. acetates, carbonates, nitrates and hydroxides) and catalyst preparation methods (viz. physical mixing of precursors, co-precipitation using ammonium carbonate/sodium carbonate as a precipitating agent), under different reaction conditions (temperature: 700-850℃, CH4/O2 ratio: 4.0 and 8.0, and GHSV: 51360 cm3 g-1 h-1)...     

Influence of CeO2 and La2O3 on properties of palladium catalysts used for emission control of natural gas vehicles

Pd/YZ-Al2O3 (Y and Zr modified Al2O3, and hereafter, labelled as Al) catalysts with 4 wt% additive CeO2 and/or La2O3 were prepared and characterized by X-ray photoelectron spectroscopy (XPS), NO-temperature programmed desorption (NO-TPD), N2-adsorption/desorption (Brunauer-Emmet-Teller BET method), X-ray diffraction (XRD) and CO-chemisorption. Catalytic activities for CH4, CO and NO conversion were tested in a gas mixture simulated the emissions from natural gas vehicles (NGVs) operated under stoichiometric conditions. The results indicated that all catalysts exhibited excellent catalytic performances for CH4 and CO oxidation and the promoting effect of CeO2 or La2O3 was significant for NO conversion. XPS results showed that the electron density around Pd was increased by CeO2 and/or La2O3, the binding energy of Pd 3d decreased as the order: Pd/Al>Pd/Ce/Al>Pd/La/Al>Pd/CeLa/Al. The electron-rich Pd showed Rh-like catalytic properties which exhibited good activity for the reduction of NO. NO-TPD results showed that the addition of CeO2 and/or La2O3 increased NO adsorption on surface, and promoted the conversion of NO.     

添加碱土金属化合物对CeO2甲烷氧化偶联催化性能的影响

天然气中甲烷的利用,特别是氧化偶联(OCM)制乙烯过程近年来成为多相催化研究的热点之一.自从1982年Keller和Bhasin提出该课题以来许多学者已进行了大量催化剂的研制工作.尽管在这方面已取得重要进展,但催化剂的性能距工业化要求还有较大差距.     

焦炉煤气甲烷重整制氢热力学分析和实验研究(英文)

对焦炉煤气甲烷部分氧化重整热力学进行分析,考察反应温度、CH4/O2摩尔比及水蒸气加入量等因素对重整性能的影响,并分析焦炉煤气原始氢含量对其部分氧化重整性能的影响.分析结果表明甲烷转化率均随CH4/O2摩尔比和水蒸气加入量的增大以及反应温度的升高而增大.在CH4/O2摩尔比1.7-2.1,温度825-900℃及压力1.01×105Pa的反应条件下,可得较好重整性能;甲烷转化率,氢及一氧化碳的选择性分别为91.0%-99.9%,87.0%-93.4%和100%-107%,重整后得到的氢量增大到原始氢量的1.95-2.05倍,每摩尔焦炉煤气消耗的热量仅为2.94J,同时得出在CH4/O2摩尔比2,温度825-900℃及1.01×105Pa条件下,往焦炉煤气内添加体积分数为2%-4%的水蒸气时重整性能得到较大提高;重整后甲烷转化率、氢及一氧化碳选择性分别由92.6%、87.2%、104%增大到98.6%、96.4%、107%.并在BaCo0.7Fe0.2Nb0.1O3-δ透氧膜反应器上研究NiO/MgO固溶体催化剂焦炉煤气部分氧化重整性能.结果表明该重整反应效果较好,于875℃下获得16.3mL.cm-2.min-1透氧量,95%甲烷转化率及80.5%氢和106%一氧化碳选择性.且所得实验结果与热力学分析结果符合较好,表明NiO/MgO固溶体催化剂有较好的催化重整性能.     

二氧化铈表面氧的活化及对氧化反应的催化作用

稀土催化材料的研究和发展为La和Ce等高丰度稀土元素的高质、高效利用提供了有效的途径．Ce基催化剂由于具有优异的储放氧性能,在氧化反应中得到广泛应用．本文介绍了采用理论模拟的方法,在研究Ce的4f轨道和结构弛豫对CeO2氧空位的形成和迁移中的作用以及作为载体时助催化作用的最新研究成果,提出了铈锆固溶体高储放氧性能的本质原因,为进一步制备高性能的氧化铈基储放氧材料和催化剂提供了理论基础．同时,对铈基催化剂在甲烷催化燃烧、CO催化氧化和卤代烃催化燃烧等反应中的应用和催化作用进行了综述,重点讨论了CeO2及其复合催化剂的氧化还原性能与其活性之间的关系．最后对在铈基催化剂研究中存在的问题和发展思路提出了思考和展望．     

还原剂对Au-Pd/CeO2催化剂甲醇部分氧化性能的影响

以PVP为保护剂,乙醇(ER)、乙二醇(GR)和水合肼(HR)为还原剂制备了一系列Au-Pd/CeO2催化剂,考察了还原剂对甲醇部分氧化性能的影响,并运用XRD、TPD和TPR等手段对催化剂进行了表征。结果表明,Au-Pd/CeO2(ER)催化剂具有较大的比表面积,形成的AuxPdy量较多、粒径较小、分散度较高、活性组分与载体的相互作用较强,同时对甲醇的吸附量较大和吸附温度较低。因此,该催化剂具有较高的催化活性和氢气选择性以及较低的CO质量分数。     

La2O3 和CeO2对CH4-CO2重整Ni/MgO催化剂结构和性能的影响

采用共沉淀方法制备了NiO-MgO、NiO-La2O3-MgO、NiO-CeO2-MgO三种催化剂，用BET、XRD、TPR、XPS、TG及活性评价等方法考察了La2O3、CeO2助剂对NiO-MgO物化性质和CH4-CO2重整反应性能的影响.实验结果表明，三种催化剂中镍物种以镍镁固溶体形式存在.与NiO-MgO相比， NiO-La2O3-MgO、NiO-CeO2-MgO具有较高比表面积，且其镍物种可还原能力有所增强， NiO-CeO2-MgO尤为明显. La2O3、CeO2均在一定程度上改善了NiO-MgO的CH4-CO2重整反应性能，提高了镍晶粒的抗烧结能力.但二者的作用机制有所差异， La2O3和CeO2分别主要作为结构助剂和电子助剂发挥作用.     

Catalytic properties of Ni/ceria-yttria electrode materials for partial oxidation of methane

The catalytic properties of electrode materials Ni/Ce1-xYxO2-δ (x = 0.05, 0.10, 0.15 and 0.20) were investigated for partial oxidation of methane (POM). The CeO2-Y2O3 solid solutions were prepared by co-precipitaion method. The Ni-based catalysts supported on the solid solutions were obtained using the impregnation method. Structural, surface and redox characteristics of the prepared catalysts were systematically examined by means of X-ray diffraction (XRD), N2 adsorption-desorption (Brunauer-Emmet-Teller BET method), H2 temperature-programmed reduction (H2-TPR) and X-ray photoelectron spectroscopy (XPS) methods. The results indicated that yttria doped in the ceria system, forming a good solid solution, readily induced more defects and oxygen vacancies that favored the improvement of catalytic activity and coking resistance. In the temperature range of 600-850 ℃, Ni/Ce0.90Y0.10O1.95 catalyst exhibited the best catalytic activity among the four tested catalysts, with the CH4 conversion, CO selectivity and H2 selectivity of 78.8%, 90.6% and 89.8%, respectively, at 850 ℃. And the H2/CO molar ratio in products of Ni/Ce0.90Y0.10O1.95 catalyst was closer to the theoretical value of 2.0. The excellent coking resistant behaviors for all catalysts were clearly manifested by Thermal Analysis.