Ag_核Au_壳金属复合纳米粒子的制备及表面增强拉曼光谱研究

在已制备好的Ag纳米粒子表面,通过化学还原的方法沉积生长Au包裹层,制备了粒子尺寸为50-70nm的Ag核Au壳复合纳米粒子.通过改变AuCl₄^-量,使Ag_100-xAu_x中Au的含量由x=0变为x=30.用UV-Vis吸收光谱和透射电子显微镜(TEM)对该结构纳米粒子进行了表征,并以对巯基苯胺(PATP)为探针分子进行表面增强拉曼光谱(SERS)研究.表面拉曼光谱表明,该结构的纳米粒子具有比Ag更强的SERS活性,随着Au:Ag比例的逐渐增加,其活性呈现先增大后减小的趋势,其最大增强约为Ag纳米粒子的10倍.     

纳米金汞核-壳粒子的电化学制备及其光谱性质

在聚乙烯吡啶修饰导电玻璃电极表面进行了金纳米粒子的二维单层结构组装,通过电沉积方法在金粒子表面制备了纳米汞壳层.研究结果表明,汞壳层的形成导致了内部金粒子表面等离子体共振的谱峰红移和强度衰减.吸附于汞壳表面的结晶紫分子因可承受被金核增强的电磁场,而使其拉曼散射得到极大的增强.     

Au@SiO2核壳纳米粒子的制备及其表面增强拉曼光谱

采用柠檬酸钠还原氯金酸法制备金溶胶, 以正硅酸乙酯(TEOS)为硅源, 氨水作催化剂, 制备以金为核, 二氧化硅为壳的核壳纳米粒子. 金纳米粒子的粒径可以通过柠檬酸钠和氯金酸的比例控制, 通过调节TEOS的量和反应的时间可以控制二氧化硅壳层的厚度. 以苯硫酚为探针分子研究了核壳结构纳米粒子的表面增强拉曼散射(SERS)效应与二氧化硅壳层厚度之间的关系. 研究结果表明, 金内核电磁场增强效应随着二氧化硅壳层厚度的增加逐渐减弱, 且其衰减速度比具有相同尺度的双金属核壳结构纳米粒子的慢. 此外, 探针分子主要以物理作用吸附在二氧化硅的表面, 可通过洗涤方法将探针分子除去, 从而可使该复合结构基底用于循环SERS分析.     

复合纳米材料Cu2O@Au对水体中罗丹明B的检测应用研究

制备了多面体Cu2 O纳米粒子,利用Cu2 O的还原性,在其表面原位生成了不同密度的Au纳米粒子,制备了Au、Cu共同增强拉曼信号的复合纳米粒子Cu2 O@Au.利用透射电镜(TEM)、扫描电镜(SEM)、X射线衍射(XRD)等对制备的Cu2 O和Cu2 O@Au的形貌、粒径、表面性能等进行了表征.研究了Cu2 O表面金纳米粒子的分布密度对水样中目标检测物罗丹明B的拉曼增强效果.结果表明,氯金酸浓度在1 mmol/L时制备的Cu2 O@Au表面均匀覆盖一层金纳米粒子,其表面增强拉曼效果最为显著,对水样中罗丹明B检测范围为1×10-2~5×10-6 mol/L.研究了此探针在PBS(1×)和酸性水溶液(0.01 mol/L HCl)中的稳定性,并将其用于沂河水样中靶标的检测实验,结果表明,其稳定性较好.     

基于表面增强拉曼光谱的重金属离子检测

以对巯基苯甲酸为拉曼标记和自组装修饰分子, 在光亮金基底上修饰后作为检测基底, 在金纳米粒子表面修饰后获得具有表面增强拉曼光谱信号的标记金溶胶. 修饰的基底及纳米离子通过重金属离子与羧基端的配位而发生相互作用, 最终形成“金属基底-对巯基苯甲酸/重金属离子/对巯基苯甲酸-金属纳米颗粒”的三明治结构. 采用扫描电镜表征纳米粒子的组装及以表面增强拉曼光谱检测表面标记分子的信号, 以此实现重金属离子的检测. 以强螯合剂EDTA溶液淋洗三明治结构, 使重金属离子与金属基底以及纳米颗粒上的羧基的配位作用断裂, 获得可再次利用的修饰金基底.     

Au@Ag纳米粒子在农药SERS光谱分析中的应用

随着现代农业的发展,多种农药被广泛应用于农田,果园和温室等场所。由于大多数农药对生态环境、动物和人类健康都有害,因此建立快速、灵敏和实时检测环境与食品中农药含量的技术显得越来越重要。本文论述了用作表面增强拉曼散射(SERS)光谱基底的金核银壳纳米粒子(Au@AgNPs)的制备方法,以及将其用于苹果表面农药百草枯Paraquat(PQ)残留量的检测分析,检测限为4.69×10~(-9) M。研究工作表明,相对于单纯的金溶胶(AuNPs)或者银溶胶(AgNPs),Au@AgNPs在该农药的SERS光谱分析中表现出更好的SERS增强效应和检测效果。Au@AgNPs在浓度为1.3×10~(-7) M的低浓度条件下仍可检测到PQ。因此,具备核壳结构的Au@Ag溶胶可用于实时和灵敏检测果皮表面的农药残留,这为相关检测技术的建立提供了有益的信息。     

抗坏血酸还原法制备金纳米花的机理

研究了以抗坏血酸和氯金酸为生长溶液制备金纳米花的反应机理. 结果表明, 通过改变生长溶液中抗坏血酸浓度可以调节小尺寸的初级金粒子在种子表面的聚集方式及金纳米花的熟化速度, 从而影响金纳米花的形貌和光学性质. 协同改变抗坏血酸浓度和pH值, 可实现对金纳米花形貌及光学性质的有效调控. 表面增强拉曼散射(SERS)性能评价结果表明, 抗坏血酸还原法制备的金纳米花表面较清洁, 对罗丹明6G有较好的拉曼增强效果.     

种子生长法制备Au@Ag核壳纳米粒子

Au@Ag核壳纳米粒子由于具有优异的局部等离子共振性质 (LSPR),近年来引起人们极大的关注,目前,在成像、催化、信息存储、生化传感等领域已经得到了广泛的应用。在制备Au@Ag核壳纳米粒子的方法中,种子生长法的应用最为广泛,因为它可以实现对Ag壳尺寸及形貌的有效控制。本文综述了影响Au@Ag核壳纳米粒子核壳结构尺寸、形貌、Ag壳厚度以及覆盖均匀程度的一些主要因素,包括Au种子的形貌和浓度、AgNO₃浓度、封端剂、还原剂以及其他一些影响因素。研究发现,Au@Ag核壳纳米粒子在表面增强拉曼光谱 (SERS) 方面具有广泛的应用前景。     

一种新型表面增强拉曼活性基底的制备方法

表面增强拉曼光谱技术 (SERS)具有极高的灵敏度 ,对某些分子其灵敏度比常规拉曼光谱高一百万倍 ,能检测吸附在金属表面的单分子层和亚单分子层的分子 ,并提供丰富的分子结构信息 [1～ 5] .活性基底的制备是获得 SERS信号的前提 ,电化学粗糙化的电极、贵金属溶胶及真空蒸镀的金属岛膜是SERS分析中最常用的 3种活性基底 ,在实际应用中各有利弊 .本文报道一种新的制备银纳米粒子基底的方法 ,可使银纳米粒子生长到合适的尺寸 ,以达到最佳SERS增强效果 .利用紫外 -可见光谱和 AFM研究该 SERS基底纳米粒子的尺寸分布和形貌 ,以 1 ,4-(双…     

基于金纳米聚集体的核壳型SERS探针及其细胞内应用

利用金纳米粒子的聚集体作为表面增强拉曼散射（Surface enhanced Raman scattering,SERS）的增强基底,合成了一种二氧化硅包裹的核壳型SERS探针,并成功将该探针应用于活细胞的SERS光谱探测.实验中利用4-巯基苯甲酸（4-mercaptobenzoicacid,4MBA）作为拉曼标记物,...     

Fabrication, Characterization, and Surface-Enhanced Raman Activity Study of Silver Coated Gold Nanoparticulate Films

This paper reports a study on the preparation of Ag-clad Au colloidal monolayer films by a combination of colloid self-assembly and liquid phase microwave high-pressure technique. Firstly, monodisperse Au nanoparticles prepared by microwave heating method were assembled onto a quartz slide. Then, these Au colloidal particles on the quartz surface acted as seeds for growing the Ag-clad Au composite particulate films. The obtained particulate films were characterized by UV-Vis spectra and atomic force microscopy. It was found that the thickness of the shell and thus the size of particles in the composite colloidal films could be controlled by deposition of Ag on the preformed Au colloidal particle film in the microwave reaction system, and such films significantly increased the surface-enhanced Raman scattering enhancement （SERS） ability compared with Au colloidal particle films. Their strong enhancement ability may mainly stem from relatively large particle consisting of Ag cladding as well as effective coupling among particles in the Ag-clad Au particle ftlms.     

Synthesis, characterization and SERS activity of Au-Ag nanorods

The formation mechanism and morphology of Au-Ag bimetallic colloidal nanoparticles depend on the composition. Ag coated Au colloidal nanoparticles have been prepared by deposition of Ag through chemical reduction on performed Au colloid. The composition of the Au(100-x)-Ag(x) particles was varied from x=0 to 50. The obtained colloids were characterized by UV-vis spectroscopy and transmission electron microscopy (TEM). The Au(80)-Ag(20) colloid consists of alloy nanorods with dimension of 25nmx100nm. The activity of these nanorods in surface enhanced Raman spectroscopy (SERS) was checked by using sodium salicylate as an adsorbate probe. Intense SERS bands are observed indicating its usefulness as a SERS substrate in near infrared (NIR) laser excitation.     

铁氧化物/金磁性核壳纳米粒子的制备及其富集与SERS研究

本文用种子生长法制备铁氧化物/金磁性核壳纳米粒子, 并利用SERS对其磁场靶向性进行了检测.     

磁性Fe_2O_3/Au/Ag复合纳米粒子的制备及其富集作用研究

利用种子生长法制备了磁性Fe2O3/Au/Ag复合纳米粒子,采用UV-vis和SEM对其光学性质以及表面结构的变化进行了表征.通过调节硝酸银的用量,制备了一系列具有不同Ag壳层厚度和表面结构的双金属外壳纳米粒子.以苯硫酚(TP)为探针分子,研究了不同Ag壳厚度的磁性纳米粒子的表面增强拉曼散射(SERS)活性.结果表明其SERS活性与表面结构的改变有关,在同时出现Ag和Au光学性质的Fe2O3/Au/Ag复合纳米粒子表面可观察到最强的SERS效应,这与表面的针孔效应以及Ag和Au之间的耦合增强作用有关.考察了Fe2O3/Au/Ag复合纳米粒子的磁富集作用,并利用SERS原位监测磁富集溶液中低浓度TP的能力,研究结果表明通过磁富集可提高SERS检测限,并且Fe2O3/Au/Ag的磁富集能力较Fe2O3/Au弱,但前者SERS信号较强.     

Cu2O/Ag纳米复合物的表面增强拉曼光谱

用一种简单的化学还原方法制备了银纳米粒子包覆的氧化亚铜（Cu2O）纳米复合物。扫描电子显微镜显示Cu2O 为八面体型的纳米粒子,表面光滑,结构对称。包覆的Ag部分占据Cu2O粒子表面。通过比较Ag/Cu2O纳米复合物、Ag溶胶及Cu纳米粒子表面吸附的4-巯基吡啶（4-Mpy）分子表面增强拉曼光谱（SERS）发现,利用此方法得到了Cu2O粒子表面吸附分子的拉曼光谱。银纳米粒子所产生的电磁场增强又增强了吸附在Cu2O上的4-Mpy拉曼信号。这种方法为初步研究Cu2O表面吸附分子性质提供了依据,扩宽了SERS的使用范围,使SERS应用在纳米半导体材料上成为可能。     

Au/Ag核-壳结构纳米粒子的制备及其SERS效应

随着大量有关表面增强拉曼散射 (SERS)的实验和理论研究的开展 ,金属纳米粒子作为一类重要的 SERS增强介质 ,已引起了人们浓厚的研究兴趣 [1] .而 Au和 Ag作为最常用的活性基底物质 ,更是研究的热点 [2 ,3 ] .最近 ,美国印第安那大学的 Nie等 [4 ] 在单个银纳米粒子上 ,观察到高达 1 0 14 ～ 1 0 15的SERS因子 .同时 ,他们的另外一项工作表明银纳米粒子的形状和大小对 SERS活性有很大影响 [5] .但是 ,由于 Ag溶胶制备的重复性较差 ,且粒度分布不均匀 ,通过控制银颗粒大小而调控 SERS活性是相当困难的[6] .与 Ag相比 ,Au在可见光…     

Selective dissolution of the silver component in colloidal Au and Ag multilayers: a facile way to prepare nanoporous gold film materials

Colloidal Au/Ag multilayer films were prepared by alternate assembly of Au nanoparticles with a size of 5 +/- 1.2 nm and Ag nanoparticles with a size of 10 +/- 2.4 nm by using 1,5-pentanedithiol as cross-linker. Nanoporous gold films with a ligament size of 26.7 +/- 4.6 nm were then prepared by selective dissolution of sacrificial templates of silver particles in colloidal Au/Ag multilayers. The complete dissolution of Ag particles in colloidal Au/Ag multilayers in a mixture solution of 3.0 mM HAuCl(4) and 3 M NaCl took place at room temperature without damage of the colloidal Au film. This method to prepare nanoporous gold films was further extended to the preparation of nanoporous gold nanotubes by depositing colloidal Au/Ag film on the inner wall of anodic aluminum oxides (AAO) followed by dissolution of colloidal Ag and removal of AAO templates.     

Electrochemical and surfaced-enhanced Raman spectroscopic investigation of CO and SCN- adsorbed on Au(core)-Pt(shell) nanoparticles supported on GC electrodes

Core-shell Au-Pt nanoparticles were synthesized by using a seed growth method and characterized by transmission electron microscopy, X-ray diffraction, and UV-vis spectroscopy. Au(core)-Pt(shell)/GC electrodes were prepared by drop-coating the nanoparticles on clean glassy carbon (GC) surfaces, and their electrochemical behavior in 0.5 M H2SO4 revealed that coating of the Au core by the Pt shell is complete. The electrooxidation of carbon monoxide and methanol on the Au(core)-Pt(shell)/GC was also examined, and the results are similar to those obtained on a bulk Pt electrode. High quality surface-enhanced Raman scattering (SERS) spectra of both adsorbed CO and thiocyanate were observed on the Au(core)-Pt(shell)/GC electrodes. The potential-dependent SERS features resemble those obtained on electrochemically roughened bulk Pt or Pt thin films deposited on roughened Au electrodes. For thiocyanate, the C-N stretching frequency increases with the applied potential, yielding two distinctly different dnu(CN)/dE. From -0.8 to -0.2 V, the dnu(CN)/dE is ca. 50 cm(-1)/V, whereas it is 90 cm(-1)/V above 0 V. The bandwidth along with the band intensity increases sharply above 0 V. At the low-frequency region, Pt-NCS stretching mode at 350 cm(-1) was observed at the potentials from -0.8 to 0 V, whereas the Pt-SCN mode at 280 cm(-1) was largely absent until around 0 V and became dominant at more positive potentials. These potential-dependent spectral transitions were attributed to the adsorption orientation switch from N-bound dominant at the negative potential region to S-bound at more positive potentials. The origin of the SERS activity of the particles is briefly discussed. The study demonstrates a new method of obtaining high quality SERS on Pt-group transition metals, with the possibility of tuning SERS activity by varying the core size and the shell thickness.     

Au@TiO2核壳纳米粒子光催化过程的表面增强拉曼光谱研究

利用聚电解质的静电吸附作用（层层组装）,在Au纳米粒子表面包裹上不同层数的二氧化钛前驱体TALH,通过退火形成Au@TiO2复合纳米粒子.以苯硫酚（TP）作为探针分子对退火前复合纳米粒子不同壳层厚度的SERS效应进行表征;可以发现：SERS信号强度的变化跟壳层厚度密切相关,当Au表面包裹至三层TALH时,信号几乎完全消失.此外,结合紫外照射,利用SERS对亚甲基蓝在TiO2壳层表面的光催化降解过程进行现场研究.结果表明：MB的降解主要经历了从多体及二聚体吸附逐渐向单体吸附方式转变,随后又经历了一个脱甲基的过程.因此,本工作发展了将一种紫外催化与现场SERS检测相结合的技术,该技术有望发展成为检测光催化过程,研究表面催化机理的一种强有力的工具     

利用纳米离子组装的方法制备SERS活性基底

A simple method for fabricating SERS-active substrate using Au nanoparticles is reported. HSCH2CH2NH2 was self-assembled on the Au/glass substrate, then nanoparticles of colloidal gold were bound to the surface. The SERS effect of such prepared substrate was studied by using BPE and an azobenzene thiol derivated compound and the SERS enhanced factor was found about 3×103.