Au@SiO2核壳纳米粒子的制备及其表面增强拉曼光谱

采用柠檬酸钠还原氯金酸法制备金溶胶, 以正硅酸乙酯(TEOS)为硅源, 氨水作催化剂, 制备以金为核, 二氧化硅为壳的核壳纳米粒子. 金纳米粒子的粒径可以通过柠檬酸钠和氯金酸的比例控制, 通过调节TEOS的量和反应的时间可以控制二氧化硅壳层的厚度. 以苯硫酚为探针分子研究了核壳结构纳米粒子的表面增强拉曼散射(SERS)效应与二氧化硅壳层厚度之间的关系. 研究结果表明, 金内核电磁场增强效应随着二氧化硅壳层厚度的增加逐渐减弱, 且其衰减速度比具有相同尺度的双金属核壳结构纳米粒子的慢. 此外, 探针分子主要以物理作用吸附在二氧化硅的表面, 可通过洗涤方法将探针分子除去, 从而可使该复合结构基底用于循环SERS分析.     

金核银壳纳米粒子薄膜的制备及SERS活性研究

采用柠檬酸化学还原法制备金溶胶, 通过自组装技术在石英片表面制备金纳米粒子薄膜, 在银增强剂混合溶液中反应获得金核银壳纳米粒子薄膜. 用紫外-可见吸收光谱仪和原子力显微镜(AFM)研究了不同条件下制备的金核银壳纳米粒子薄膜的光谱特性和表面形貌, 并以结晶紫为探针分子测量了金核银壳纳米粒子薄膜的表面增强拉曼光谱(SERS). 结果表明, 金纳米粒子薄膜的分布、银增强剂反应时间的长短对金核银壳纳米粒子薄膜的形成均有重要影响. 制备过程中, 可以通过控制反应条件获得一定粒径的、具有良好表面增强拉曼散射活性的金核银壳纳米粒子薄膜.     

具有温度响应壳层的金纳米粒子的制备

利用可逆-加成断裂链转移聚合得到全亲水性的嵌段共聚物(PEO-b-PNIPAM), 通过"grafting to"使其接枝到金纳米粒子表面. 通过透射电子显微镜、 紫外-可见吸收光谱、 能谱分析及动态光散射研究了杂化的金纳米粒子的壳层结构及温度响应行为. 实验结果表明, 得到核壳结构的金纳米粒子, 同时其壳层具有温度响应行为. 随着温度的升高, 其流体力学半径略有减小. 在整个升温过程中, 由于外层PEO链段的抑制作用, 没有发生粒子间的聚集.     

聚甲基丙烯酸甲酯-牛血清白蛋白核壳纳米粒子在金表面的吸附过程及在传感器中的应用

利用铜离子引发体系, 制备出核层为聚甲基丙烯酸甲酯(PMMA)壳层为牛血清白蛋白(BSA)的PMMA-BSA核壳纳米粒子. 通过透射电子显微镜(TEM)表征, 直接观察到PMMA-BSA纳米粒子的核壳结构.结合X射线光电子能谱(XPS)测试, 分析PMMA-BSA纳米粒子的表面成分, 证明PMMA-BSA纳米粒子的壳层是BSA. 利用带耗散的石英晶体微天平(QCM-D)研究了PMMA-BSA纳米粒子在金片表面的吸附行为. 频率的迅速下降, 耗散因子的快速上升, 说明PMMA-BSA粒子快速地吸附到金片表面. 利用磷酸盐缓冲液反复冲洗时, 频率和耗散没有变化, 表明PMMA-BSA 纳米粒子在金片上吸附较牢固. 以金电极为基底电极, 吸附PMMA-BSA纳米粒子后, 利用戊二醛修饰粒子壳层, 再通过氨基与醛基的反应来固定葡萄糖氧化酶, 制备出电流型葡萄糖传感器. 电化学测试表明该传感器对葡萄糖具有良好的电流响应, 在0.3 V的工作电位下, 响应电流与葡萄糖浓度在0.20-5.85 mmol·L^-1范围内呈现出较好的线性关系, 相关系数为0.989. 传感器的灵敏度高达28.6 μA·L·mmol^-1·cm^-2, 响应时间仅为11 s. 传感器还具有良好的稳定性, 在25℃下储存30 d, 响应电流仅下降了16%.     

纳米金掺杂中空微胶囊的制备与表征

将表面含有双键的二氧化硅微粒分散在纳米金和聚乙烯吡咯烷酮溶液中.在此溶液中以聚乙烯吡咯烷酮为模板聚合物进行丙烯酸的模板聚合,得到二氧化硅为核、聚丙烯酸/聚乙烯吡咯烷酮/纳米金为壳层的核壳结构微粒.用氢氟酸将二氧化硅微粒去除后,得到了纳米金粒子掺杂的微胶囊.分别用扫描电子显微镜和激光共聚焦显微镜表征了微胶囊在干态和湿态下的形貌.通过电子衍射和透射电子显微镜确证了纳米金粒子在微囊壁上的存在和分布.     

立方体形Au_(core)-Pd_(shell)-Pt_(cluster)纳米材料对甲酸电催化的研究

应用晶种生长法制得金纳米立方体,Aucore-Pdshell和Aucore-Pdshell-Ptcluster电催化剂,通过改变溶液的H2PdCl4和H2PtCl6的用量以控制Pdshell的厚度和Ptcluster的覆盖度.采用扫描电镜(SEM)、透射电镜(TEM)观察了金纳米立方体的表面结构.利用循环伏安法(CV)研究了不同Pd层厚度的立方体形Aucore-Pdshell纳米粒子和不同Pt岛覆盖度的立方体形Aucore-Pdshell-Ptcluster纳米粒子对甲酸氧化的电催化性能.结果表明,与立方体形Aucore-Pdshell纳米粒子相比,"核-壳-岛"结构的立方体形Aucore-Pdshell-Ptcluster纳米粒子对甲酸的电氧化具有更高活性.当Pd壳层厚度为3层,Pt岛覆盖度为0.5时,电催化活性最高.     

Au@Pt纳米粒子单层膜对甲醇氧化的电催化性能及SERS研究

通过种子生长法合成Au@Pt核壳结构纳米粒子,采用两相成膜法制备单层粒子膜,并转移获得Au@Pt核壳纳米粒子单层膜电极,该电极表面纳米粒子分布均匀,具有较大的比表面,对甲醇的氧化具有较好的电催化活性.研究表明,利用内核Au的长程电磁场增强效应,该单层膜表现出均匀且优良的表面增强拉曼散射(SERS)活性,适合作为基底在分子水平上研究表面的吸附和反应.获得了Au@Pt核壳纳米粒子单层膜表面甲醇电催化氧化过程的SERS光谱,为深入分析表面反应机理提供了实验依据.     

聚苯胺包裹的金纳米粒子的合成和表征及初步应用

用苯胺作还原剂还原氯金酸合成了金纳米结构. TEM实验表明, 苯胺还原氯金酸能生成苯胺齐聚物或其聚合物包裹的金球形纳米粒子. XPS分析表明, 金纳米粒子包覆的聚合物层带正电荷. 该纳米粒子能用于电极表面纳米结构组装及氧化还原性的生物大分子的电化学研究, 实现了超氧化物歧化酶(SOD)在这种带正电荷的金纳米粒子表面的直接电子转移.     

SiO2 /Au核壳结构纳米粒子的制备及表征

通过以金纳米粒子为表面晶种和壳生长的方法制备了金纳米壳包覆二氧化硅的复合纳米粒子。采用TEM 和UV-Vis对复合粒子进行了表征和研究，结果表明所得到的复合粒子粒径均匀、金纳米壳光滑完整，且壳厚度可通过反应物的用量来控制。当核半径与壳厚度之比在4到13之间变化时,复合粒子的光学共振峰在可见光区到近红外光区范围内可发生大于500 nm波长的移动。     

基于表面增强拉曼光谱的重金属离子检测

以对巯基苯甲酸为拉曼标记和自组装修饰分子, 在光亮金基底上修饰后作为检测基底, 在金纳米粒子表面修饰后获得具有表面增强拉曼光谱信号的标记金溶胶. 修饰的基底及纳米离子通过重金属离子与羧基端的配位而发生相互作用, 最终形成“金属基底-对巯基苯甲酸/重金属离子/对巯基苯甲酸-金属纳米颗粒”的三明治结构. 采用扫描电镜表征纳米粒子的组装及以表面增强拉曼光谱检测表面标记分子的信号, 以此实现重金属离子的检测. 以强螯合剂EDTA溶液淋洗三明治结构, 使重金属离子与金属基底以及纳米颗粒上的羧基的配位作用断裂, 获得可再次利用的修饰金基底.     

Gold nanoshells on polystyrene cores for control of surface plasmon resonance

A method is presented for synthesizing core-shell structures consisting of monodisperse polystyrene latex nanospheres as cores and gold nanoparticles as shells. Use of polystyrene spheres as the core in these structures is advantageous because they are readily available commercially in a wide range of sizes, and with dyes or other molecules doped into them. Gold nanoparticles, ranging in size from 1 to 20 nm, are prepared by reduction of a gold precursor with sodium citrate or tetrakis(hydroxymethyl)phosphonium chloride (THPC). Carboxylate-terminated polystyrene spheres are functionalized with 2-aminoethanethiol hydrochloride (AET), which forms a peptide bond with carboxylic acid groups on their surface, resulting in a thiol-terminated surface. Gold nanoparticles then bind to the thiol groups to provide up to about 50% coverage of the surface. These nanoparticles serve as seeds for growth of a continuous gold shell by reduction of additional gold precursor. The shell thickness and roughness can be controlled by the size of the nanoparticle seeds as well as by the process of their growth into a continuous shell. By variation of the relative sizes of the latex core and the thickness of the gold overlayer, the plasmon resonance of the nanoshell can be tuned to specific wavelengths across the visible and infrared range of the electromagnetic spectrum, for applications ranging from the construction of photonic crystals to biophotonics. The position and width of the plasmon resonance extinction peak are well-predicted by extended Mie scattering theory.     

Dipole-dipole plasmon interactions in gold-on-polystyrene composites

Red-shifting of the optical absorption spectra of aggregates of gold nanoparticles by dipole-dipole interactions is of considerable interest, both for theoretical reasons and because the phenomenon can be potentially exploited in various applications. A convenient and practical way to control the effect is to assemble the aggregated ensemble of n gold nanoparticles on the outer surface of larger dielectric spheres. Here, we show by experiment and calculation how the spectra of these structures can be systematically morphed from that of isolated gold particles, through the regime of broad absorption dominated by particle-particle interactions, and finally to the limiting case of a continuous nanoshell. The experimental data were produced using the process of deposition-precipitation, which provides a facile method to decorate polystyrene microspheres with gold nanoparticles. There is no need for prior functionalization of the microsphere surface in our method of deposition-precipitation. Calculations were carried out using a code based on the discrete dipole approximation (DDA). The spectra were dominated by three effects. These were a peak absorption at about 540 nm produced by the conventional plasmon resonance of spherical gold nanoparticles, a broad absorption in the range 600-900 nm caused by diverse dipole-dipole interactions between particles, which strengthened as the number of attached gold particles increased and finally, when n was large, an absorption peak due to the onset of nanoshell-like resonances. The experimental spectra could be successfully fitted by spectra calculated using combinations of these effects.     

Characteristics of polypyrrole electrodeposited onto roughened substrates composed of gold–silver bimetallic nanoparticles

In this work, the characteristics of polypyrrole (PPy) films electrodeposited onto an electrochemically roughened gold substrate with bimetallic silver and gold nanoparticles were first investigated. First, a silver substrate was roughened by a triangular‐wave oxidation–reduction cycle (ORC) in an aqueous solution containing 0.1 M HCl. Subsequently, a gold substrate was roughened by a similar ORC treatment in this used solution. The results revealed that the surface of the roughened gold substrate demonstrated two different kinds of deposition domains because of the modification of silver nanoparticles. Encouragingly, some novel characteristics of PPy deposited onto this substrate were observed, in comparison with those on the roughened gold substrate without the modification of silver nanoparticles. They included a denser and more compact surface morphology, higher oxidation degree, increased conductivity, and improved surface‐enhanced Raman scattering. Furthermore, the nucleation and growth mechanism for PPy electropolymerization on this silver‐modified roughened gold substrate was distinguishable from that on the unmodified one. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2724–2731, 2006     

Encapsulation of drug nanoparticles in self-assembled macromolecular nanoshells

Layer-by-Layer (LbL) stepwise self-assembly of the polyelectrolytes poly(allylamine hydrochloride) and poly(styrenesulfonate) was used to create a macromolecular nanoshell around drug nanoparticles (approximately 150 nm in diameter). Dexamethasone, a steroid often used in conjugation with chemotherapy, was chosen as a model drug and was formulated into nanoparticles using a modified solvent-evaporation emulsification method. Measurement of the zeta potential (zeta-potential) after each polyelectrolyte layer was electrostatically added confirmed the successful addition of each layer. Additionally, data acquired from X-ray photon spectroscopy (XPS) indicated the presence of peaks representative of each physisorbed polyelectrolyte layer. Surface modification of the nanoshell was performed by covalently attaching poly(ethylene glycol) (PEG) with a molecular weight of 2000 to the outer surface of the nanoshell. Zeta potential measurements and XPS indicated the presence of PEG chains at the surface of the nanoshell. The polymeric nanoshell on the surface of the drug nanoparticle provides a template upon which surface modifications can be made to create a stealth or targeted drug delivery system.     

Macrophage uptake of core-shell nanoparticles surface modified with poly(ethylene glycol)

The in vitro uptake of core-shell nanoparticles encapsulated in a bio-macromolecular nanoshell assembled from multilayered polyelectrolytes was studied. Sulfate modified fluorescent polystyrene nanobeads (diameter 200 nm) were used as a solid core upon which charged multilayers of poly-l-lysine, chitosan, and heparin sulfate are electrostatically deposited utilizing a layer-by-layer (LbL) self-assembly process. The nanoshell composed of the multilayered polyelectrolytes was modified with poly(ethylene glycol) (PEG) of varying molecular weights (either MW 2000, 5000, or 20 000 Da) to form a hydrophilic and long-circulating nanoparticle. The assembly of the nanoshell was confirmed by zeta potential, transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The reversal in charge upon the deposition of alternating polyelectrolytes was observed by zeta potential measurements. The nanometer thickness of the nanoshell was confirmed by TEM. The presence of the (C-C-O)(n)() backbone in PEG at the surface of the nanoshell was confirmed by the increase in (C-O,N) peak area concentrations compared to (C-C) peak area, and these results were gathered from XPS. In vitro studies between suspension macrophages and core-shell nanoparticles were performed to determine how the hydrophilicity and the charge on the nanoshell can promote or reduce uptake. Results showed that after 24 h uptake was decreased 3-fold when PEGs of 2000 and 20 000 Da were chemisorbed to the nanoshell, as opposed to a nanoshell with either a positive or highly negative charge. Confocal microscopy aided in verifying that core-shell nanoparticles were internalized within the cell cytoplasm and were not attached to the cell surface. Protein adhesion studies with bovine serum albumin were performed to determine the relationship between surface charge and opsonization of core-shell nanoparticles. It was found that a hydrophilic surface with a low negative charge reduced protein adsorption and uptake. The in vitro uptake of macrophages and protein adsorption onto core-shell nanoparticles formed using layer-by-layer assembly has not been previously studied.     

An indium tin oxide electrode modified with gold nanorods for use in potential-controlled surface plasmon resonance studies

The modification of electrodes with gold nanoparticles results in an increased electrode surface area, enhanced mass transport, and improved catalytic properties. We have extended this approach to indium tin oxide (ITO) electrodes to obtain optically transparent gold nanorod-modified electrodes which display enhanced electrochemical capabilities and have the additional advantage of showing a tunable surface plasmon resonance. The procedures for attaining high surface coverage (15 gold nanorods per square µm) of such electrodes were optimized, and the potential-dependent surface plasmon resonance was studied under controlled electrical potential. In an exemplary sensor application, we demonstrate the detection of mercury via potential-dependent formation of an Au-Hg amalgam.

以碳微球为核的金纳米壳球体的制备

通过水热合成法制备了单分散碳微球, 并以此单分散碳微球为核, 利用其表面修饰的银纳米粒子作为种子, 进一步还原制备了以碳微球为核、以金为壳的金纳米壳(Nanoshell)球体. 通过透射电子显微镜和紫外可见吸收光谱对其形态以及光谱性质进行了表征. 研究结果表明, 采用该种方法制备出来的碳微球具有良好的单分散性, 表面修饰简便快捷, 利用碳微球为核制备的金纳米壳球体尺寸可控, 在近红外范围内有强吸收. 实验结果证明该方法是制备金纳米壳球体的一种有效新方法.     

Determination of Nanomolar Levels of Mercury(II) by Exploiting the Silver Stain Enhancement of the Aggregation of Aptamer-Functionalized Gold Nanoparticles

An ultrasensitive method for the determination of mercury(II) ions was developed based on mercury(II)-induced strong and selective binding of thymine-thymine mismatches between aptamers on gold nanoparticles and a signal amplification effect caused by a silver stain. The gold nanoparticles were first coated with a single-stranded DNA aptamer rich in thymine. In the presence of mercury(II), the functionalized gold nanoparticles aggregated due to the formation of thymine-Hg(II)-thymine complexes resulting in a largely reduced surface area of the gold nanoparticles when exposed to silver ions during staining. Therefore, fewer silver ions were reduced, and the average grey values, as measured by a scanner, were lower. The average grey values were linearly related to the logarithm of mercury(II) concentration from 1 to 500 nM. In addition, there were no significant interferences by common metal ions due to the high specificity of the interaction between mercury(II) and the aptamer. The method offers high sensitivity, good selectivity, and the absence of large equipment that makes it suitable for field analysis.