首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 63 毫秒
1.
基于铁氰酸镍修饰的双酶电流型胆碱传感器的研究   总被引:1,自引:1,他引:0  
提出了一种以电沉积铁氰酸镍(NiHCF)无机膜为介体的胆碱传感器的制备方法。该传感器以壳聚糖为酶固定基质,用戊二醛作交联剂分别固定辣根过氧化物酶和胆碱氧化酶。该传感器在pH6.8,外加电压-0.1V条件下,对2.0×10-5~1.0×10-3mol/L的胆碱呈良好的线性响应,检出限为5.0×10-6mol/L。传感器有良好的选择性和稳定性,使用1个月后,仍能保持其初始活性的75%。  相似文献   

2.
基于壳聚糖膜固定双酶的胆碱传感器的研究   总被引:3,自引:0,他引:3  
提出了一种基于壳聚糖膜固定辣根过氧化物酶 胆碱氧化酶的胆碱传感器的制备方法。该传感器以电聚合于玻碳电极的硫堇作为电子传递介体,在pH6. 8,外加电压-0. 2V(vs.SCE)条件下,其峰电流与浓度范围 5. 0×10-5 ~3. 0×10-3 mol/L的胆碱呈良好的线性响应;检出限为 1. 0×10-5 mol/L。传感器有良好的选择性和稳定性,使用一月后,仍能保持其初始活性的 80%。  相似文献   

3.
天青Ⅰ为电子媒介体金纳米颗粒修饰葡萄糖生物传感器   总被引:4,自引:0,他引:4  
用纳米金溶胶与聚乙烯醇缩丁醛(PVB)构成复合固酶基质,采用溶胶凝胶法固定葡萄糖氧化酶(GOx)于铂金电极表面,并在葡萄糖溶液中加入天青Ⅰ作为电子媒介体,制成了新型葡萄糖生物传感器。实验证明,葡萄糖氧化酶吸附在纳米金颗粒表面上稳定且保持其生物活性;而电子媒介体的存在,显著提高了传感器的响应灵敏度。该传感器对葡萄糖响应的线性范围为2.5×10-5~7.5×10-3mol/L;检出限为8.5×10-6mol/L(S/N=3)。该生物传感器用于人体血清中的葡萄糖测定,结果令人满意。  相似文献   

4.
利用AuNPs/Nafion复合膜技术固定Ru(bpy)2+3,采用羧基化碳纳米管固定氨基化腺苷适配体,制备腺甘电化学发光生物传感器.采用循环伏安法和电化学发光法对传感器进行表征.结果表明,此传感器具有良好的稳定性和重现性.腺苷与传感器作用后,腺苷与其适配体形成G四面体结构,Ru(bpy)2+3的电化学发光强度降低.在最佳实验条件下,电化学发光强度降低量与腺苷浓度的负对数在1.0×10-11~1.0×10-7 mol/L范围内呈良好的线性关系,线性方程为ΔIECL=-890lgC-5050,检出限(S/N=3)为5.0 × 10-12 mol/L.对1.0 × 10-10 mol/L腺苷平行测定11次,相对标准偏差为2.7%.用于尿液中腺苷的测定,加标回收率在 97.1%~110.0%之间.  相似文献   

5.
王怀生  潘芊秀  王桂香 《分析化学》2005,33(11):1623-1626
用一种新型的壳聚糖(CS)/聚乙烯吡咯烷酮(PVP)复合膜在玻碳电极(GCE)上固定辣根过氧化物酶(HRP)。以乙二醛作交联剂,二茂铁(Fc)作媒介体,制备过氧化氢生物传感器。红外光谱表明:CS与PVP交联形成了一种新的高聚物,实验结果证明该聚合物适合辣根过氧化物酶的固定。该传感器对于H2O2的电流响应在5 s内即可达到最大,线性范围为6.0×10-6~1.7×10-4mol/L;检出限为2.5×10-6mol/L。该传感器的检测灵敏度为62.5μA/mmol/L。  相似文献   

6.
基于静电吸附多层膜固定酶的过氧化氢生物传感器的研究   总被引:17,自引:2,他引:15  
以玻碳电极为基底,电聚合2,6-吡啶二甲酸(PDC),使形成一带负电的界面,再通过静电吸附自组装一层聚阳离子聚丙烯胺(PAH),用于静电吸附固定辣根过氧化物酶并以此方法固定多层酶膜制备过氧化氢传感器.探讨了工作电位、介体浓度、pH对电极响应的影响,考察了电极的重现性、干扰及使用寿命.该传感器在H2O2浓度4.6×10-6~3.5×10-3 mol/L范围内有线性响应, 检出限为2×10-6 mol/L.电极在用于实际试样回收率的测定中,结果良好.  相似文献   

7.
构建了一种基于氯化血红素/金纳米粒子/聚三聚氰胺/多壁碳纳米管复合材料修饰玻碳电极的过氧亚硝酸阴离子电化学传感器,并成功用于过氧亚硝酸阴离子的检测.采用循环伏安法和电流-时间曲线考察了过氧亚硝酸阴离子在传感器上的电化学行为,并对传感器的制备条件及过氧亚硝酸阴离子的检测条件进行了优化.结果表明,碳纳米管滴涂量为5 μL,金沉积时间为20 s,工作电位为0.8V时,所制传感器对过氧亚硝酸阴离子的响应最大.在优化实验条件下,此传感器检测过氧亚硝酸阴离子的线性范围为1.0×10-5~3.5×10-4 mol/L和3.5×10-4~1.1×10-3 mol/L,灵敏度为0.13 A/(mol/L),检出限为1.2×10-7 mol/L(S/N=3).  相似文献   

8.
聚亚甲基蓝和纳米金修饰玻碳电极的葡萄糖生物传感器   总被引:11,自引:4,他引:7  
用循环伏安法在玻碳电极上电聚合一层稳定的亚甲蓝聚合物膜,研究了这层膜在0.1mol/L磷酸缓冲溶液(pH7.0)中的电化学性质。用纳米金溶胶与聚乙烯醇缩丁醛(PVB)构成复合固酶基质,采用溶胶-凝胶法固定葡萄糖氧化酶(GOD)于亚甲蓝修饰的玻碳电极表面,制成了新型葡萄糖生物传感器。实验发现,加入纳米金后提高了酶电极对葡萄糖的电流响应,所制备的传感器具有响应快、灵敏度高、稳定性好,对葡萄糖的线性响应范围为1×10-6~3×10-3mol/L,检出限为5×10-7mol/L。并具有抗尿酸、抗坏血酸干扰的特点。  相似文献   

9.
在塑料基片上制备了金薄膜的两电极系统的生物传感器.集成化的Ag|AgCl参比电极采用丝网印刷在薄膜电极上.以聚乙二醇二缩水甘油醚(PEGDGE)为交联剂,将辣根过氧化酶(HRP)和谷氨酸氧化酶(GLOD)固定到聚乙烯吡啶与2,2'-双吡啶锇形成的氧化还原复合物中,滴在电极表面形成传感器的工作电极.实验结果表明,该生物传感器在谷氨酸溶液的浓度为1.0×10-6~4.0×10-4 mol/L的范围内,具有很好的线性关系(r=0.9998,n=9),灵敏度为37.5 mA(mol/L)-1cm-2;谷氨酸检出限为1.0×10-6 mol/L;传感器响应时间为10 s且有良好的一致性和稳定性,使用一个月后仍能保持其初始活性的90%.该传感器可以用于食品工业中的谷氨酸的快速检测和在线监测等.  相似文献   

10.
以聚乙烯醇缩丁醛为固定葡萄糖氧化酶(GOD)的载体,将GOD附在铂丝电极上并采用高氯酸·三-2,2'-联吡啶合钴(Ⅲ)[Co(bpy)3(ClO4)3]作为电子媒介体制得了电流型葡萄糖酶电极.讨论了溶解性媒介体Co(bpy)3(ClO4)3的浓度、溶液的pH值和温度对该电极电流响应的影响.该介体型葡萄糖传感器在优化的实验条件下,对葡萄糖表现出良好的响应特性,如响应快、重复性和稳定性好,传感器线性范围为6.0×10-6~1.1×10-4mol/L,检出限为3.0×10-6mol/L.将该电极用于人血清中葡萄糖测定,其结果与传统方法测得的结果一致.  相似文献   

11.
A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.  相似文献   

12.
The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp3)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp2)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp2)?H and aliphatic 1,5- and 1,6-C(sp3)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp3)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp2)?H insertion.  相似文献   

13.
N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).  相似文献   

14.
An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y1 and Y2. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.  相似文献   

15.
In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.  相似文献   

16.
Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.  相似文献   

17.
用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.  相似文献   

18.
19.
A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu0 as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than CuI in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).  相似文献   

20.
(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C60, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号