荧光素蒽醌甲酯分子内光诱导电子转移及电荷分离态的检测

合成了以荧光素为光敏剂的电子给体-受体二元化合物荧光素蒽醌甲酯(FL-AQ),用吸收光谱、荧光光谱、荧光寿命研究了该化合物在乙醇溶液中的光物理性质,并首次用纳秒级瞬态吸收光谱检测了此化合物分子内光诱导电子转移所形成的电荷分离态.在溶液中激发FL,电子可从FL有效地转移到AQ,其速率常数为3.95×10⁹s^-1,效率为95%.但由于电荷分离态寿命较短,瞬态吸收信号弱,若在此溶液中加入二氧化钛(TiO₂)纳米胶体,使FL-AQ吸附在胶体上,电荷分离态信号明显增强.480nm处FL^+·的寿命为11.1μs;560nm处AQ^-·的寿命为8.93μs.     

二茂铁-酞菁-富勒烯超分子三元体系的构筑及光物理和电化学性质

采用富勒吡咯烷衍生物中的吡啶或咪唑基与二茂铁修饰的金属酞菁轴向配位构筑了二茂铁-酞菁-富勒烯超分子三元体系, 通过紫外-可见光谱滴定法测定了其配位稳定性(K_assoc约为8.58×10⁴ L/mol). 稳态和时间分辨荧光光谱研究结果表明, 在该超分子三元体系中发生了快速的光诱导电子转移(k_CS约为10⁹ s^-1), 并具有较高的电荷分离态量子产率(Ф_CS=0.88). 循环伏安法数据表明, 其电荷分离驱动力ΔG_CS为负值(-0.60 eV), 说明酞菁和富勒烯之间容易形成电荷分离态.     

三代碳硅烷光致变色液晶树状物的光化学研究——端基含108个4-丁氧基偶氮苯介晶基元

报道了新化合物含108个丁氧基偶氮基元端基的三代(D3)碳硅烷光致变色液晶树状物在各溶液中的反-顺光异构化(光致变色)反应速率常数k_p, 光化学回复异构化正/逆反应速率常数k_t和k_c, 热回复异构化反应速率常数k_H, 光化学回复异构化反应平衡常数k_t/k_c, 活化能E, 异构化转换率及热回复异构化反应中的反-顺异构体组分比. D3的光致变色反应速率常数为10^－1 s^－1, 而含偶氮基元的光致变色液晶聚硅氧烷的光致变色反应速率常数为10^－8 s^－1, 因此, D3的光响应速度比后者快10⁷倍.     

羧脒盐桥介导的单重态能量传递直接观察

设计构建了以羧脒盐桥联接的萘和蒽超分子组装体系,NA-(脒基-羧基)-An以及相应的模型体系.稳态和时间分辨荧光光谱研究表明,置于羧脒盐桥两端的萘和蒽基团之间发生了从萘到蒽的单重态能量传递,NA-(脒-羧)-An超分子体系中单重态能量传递效率和速率常数分别大于0.99和9.9×10⁹s^-1.推测羧脒盐桥介导了体系中的单重态能量传递过程,单重态能量传递‘通过键’以电子交换机制进行.     

四苯基钴卟啉化合物催化过亚硝酸根分解的研究

利用紫外-可见分光光度计在乙醇介质中研究了合成的4种对位取代四苯基钴卟啉对过亚硝酸根分解的催化作用. 首次发现钴卟啉可以催化ONOO^－分解, 且对位带吸电子基团的钴卟啉比对位带供电子基团的钴卟啉催化活性高. TPPCoCl, T(p-CH₃)PPCoCl, T(p-OCH₃)PPCoCl和T(p-Cl)PPCoCl在乙醇中的k_cat分别为1.69×10², 1.52×10², 1.43×10²和1.20×10³ mol^－1•L•s^－1. 动力学曲线和时间分辨谱证明这些钴卟啉是通过形成中间体催化过亚硝酸根分解的.     

周边含己氧基的三代光致变色液晶树枝状大分子的光化学

报道了新化合物含108个己氧基端基的三代(G3)碳硅烷光致变色液晶树状大分子在溶液中的反-顺光异构化反应速率常数k_p, 光回复异构化正/逆反应速率常数k_t和k_c, 热回复异构化反应速率常数k_H, 光回复异构化反应平衡常数k_t/k_c, 活化能E, 异构转化率A/A₀及组分比A'/A₀. G3的光致变色反应速率常数的数量级为10^－1 s^－1, 而侧链含偶氮基元的光致变色聚硅氧烷的光致变色反应速率常数的数量级为10^－8 s^－1, 因此G3的光响应速率比后者快10⁷倍.     

吡啶离子液体[BPy][BF4]与乙腈混合体系中杜醌的光化学反应动力学

用激光闪光光解方法研究了杜醌(DQ)在吡啶型离子液体N-丁基吡啶四氟硼酸盐([BPy][BF₄])与乙腈(MeCN)组成的共混溶剂中的光化学反应机理与动力学. 实验结果表明, 离子液体[BPy][BF₄]对混合体系中杜醌激发三线态(³DQ^*)的瞬态吸收峰位置和吸光度大小都没有产生明显影响. 在N₂饱和条件下, 无论是在乙腈溶液中还是在[BPy][BF₄]/MeCN混合溶液中³DQ^*的衰减都遵循一级反应动力学规律. 而[BPy][BF₄]的存在对³DQ^*与三乙胺(TEA)之间的电子转移影响显著. 随着[BPy][BF₄]/MeCN 体系中离子液体比例的增加, 杜醌三线态³DQ^*与TEA间的瞬态反应机理没有改变, 但它们之间的光诱导电子转移反应速率和生成自由基的量子产额逐渐降低, 通过改变离子液体的比例可以调节该体系中光诱导电子转移反应的速率和效率.     

修饰NADH模拟物的金属-有机三元环光催化制氢

将含有不同还原型烟酰烟腺嘌呤二核苷酸(NADH)活性中心模拟物的有机配体H₂L¹和H₂L²与钴离子配位自组装获得2例具有氧化还原活性且带有正电荷的金属-有机大环Co-L¹和Co-L²。选择阴离子型钌基光敏剂[Ru(dcbpy)₃]^4-(dcbpy=2,2′-联吡啶-4,4′-二羧酸)作为光敏中心,金属-有机大环结构作为质子还原催化剂,通过静电作用力将光敏中心封装在其空腔内部以加速光诱导电子转移(PET)过程,构建了人工光合成体系并应用于光解水制氢研究。相比于未修饰NADH模拟物的金属-有机大环Co-L³以及未修饰NADH模拟物但配位环境相同的单核催化剂Co-L⁴,由Co-L¹和Co-L²构建的金属-有机大环主客体超分子体系的光催化产氢效率分别提高1.6和6倍,可能是由于NADH活性中心模拟物的引入以及主客体超分子体系的形成有利于光敏中心与催化中心之间的光致电子转移过程。     

基于2,3-丁二酮双缩氨基硫脲为中性载体的新型银离子选择性电极的研究

研究了基于2,3-丁二酮双缩氨基硫脲为中性载体的聚氯乙烯(PVC)膜电极, 该电极对银离子(Ag^＋)具有优良的电位响应性能. 在pH＝3.0的NaOH-HNO₃体系中, 该电极对Ag^＋电极电位呈现近能斯特响应, 线性响应范围为3.0×10^－6～1.0×10^－2 mol/L, 斜率为52.6 mV/decade (20 ℃), 检测下限为1.0×10^－6 mol/L. 相对于常见的阳离子, 该电极对Ag^＋表现出良好的选择性. 采用交流阻抗技术研究了电极响应机理, 并将电极初步应用于回收率实验, 结果令人满意.     

可见光诱导下喹喔啉酮与吡咯衍生物的氧化偶联（英文）

发展了一种区域选择性的喹喔啉酮3-位氧化偶联富电子吡咯衍生物的方法.以Mes-Acr-Me⁺ClO₄^-(3 mol%)为光敏剂,空气氧为氧化剂,高收率得到喹喔酮与吡咯衍生物的氧化偶联产物.该方法底物的官能团适用范围广,反应高效绿色,可快速构建基于喹喔啉酮-吡咯衍生物的药物分子库.相同测试条件下的Stern-Volmer荧光淬灭实验表明缺电子芳烃1-甲基喹喔啉酮对光敏剂的淬灭速率常数K_q=1.2×10⁹ L·mol^-1·s^-1,而富电子芳烃1-甲基吡咯/1-甲基吲哚的淬灭常数约为1.06～1.07×10¹⁰ L·mol^-1·s^-1,后者的荧光淬灭速率几乎是前者的10倍.     

γ-环糊精诱导的双2-萘甲酸三缩四乙二醇酯的分子内光二聚反应

本文研究了在水溶液中γ-环糊精诱导双2-萘甲酸三缩四乙二醇酯(N-P4-N)的分子内光二聚反应.γ-环糊精能够控制N-P4-N光二聚反应的区域选择性和立体选择性,反应只得到反式-头头结构的分子内类立方烷光二聚体,其对映体选择性达20.4%e.e.(在0.5℃时).     

瞬态吸收光谱研究水相中三苯基锡与•OH自由基反应机理

利用激光闪光光解技术进行了有氧、无氧条件下氯化三苯基锡与亚硝酸水溶液的紫外光解反应研究。研究表明,•OH和三苯基锡阳离子(Sn(C6H5)3+)反应生成了瞬态粒子Sn(C6H5)3+-OH,其二级反应速率常数为(7.9±1.2)×109 L mol-1 s-1。在N2饱和条件下,Sn(C6H5)3+-OH以单分子方式衰减,其衰减速率常数为(1.15±0.15)×105 s-1;在O2饱和条件下,表观一级衰减常数增加为(1.87±0.25)×105 s-1,这是由于Sn(C6H5)3+-OH能够与O2发生作用生成Sn(C6H5)3+-OHO2,其二级反应速率常数为(6.0±2.9) ×107 L mol-1 s-1。     

Two classes of alongside charge-transfer interactions defined in one [2]catenane

A [2]catenane, which incorporates hydroquinone (HQ) and a sterically bulky tetrathiafulvalene (TTF) into a bismacrocycle, has been designed to probe the alongside charge-transfer (CT) interactions taking place between a TTF unit and one of the bipyridinium moieties in the tetracationic cyclophane cyclobis(paraquat-p-phenylene) (CBPQT4+). A template-directed strategy employs the HQ unit as the primary template for formation of the tetracationic cyclophane CBPQT4+, affording the desired [2]catenane structure but as an uncharacteristic green solid. The X-ray crystal structure and detailed 13C NMR assignments have identified a stereoselective preference for catenation about the cis isomer. The 1H NMR spectroscopy, electrochemistry, and X-ray crystallography all confirm that the CBPQT4+ cyclophane encircles the HQ unit, thereby defining a structure which would normally determine a red color. The visible-NIR region of the absorption spectrum displays a band at approximately 740 nm that is unambiguously assigned to a TTF --> CBPQT4+ CT transition on the basis of resonance Raman spectroscopy using 785 nm excitation. The profile of the CT band changes depending on the ratio of the cis- to trans-TTF isomers in the [2]catenane for which the molar absorptivity of each isomer is estimated to be significantly different at epsilon max = 380 and 3690 M-1 cm-1, respectively. Molecular modeling studies confirmed that the observed difference in the absorption spectroscopic profile can be accounted for by both a better overlap of the HOMO(TTF) and LUMO+1(CBPQT4+) as well as a more stable face-to-face (pi...pi) conformation in the trans isomer compared to the edge-to-face cis isomer of the [2]catenane. The latter is arranged for pi-orbital overlap through the sulfur atoms of the TTF unit, thereby defining an [Spi...pi] interaction.     

Binding studies between triethylene glycol-substituted monopyrrolotetrathiafulvalene derivatives and cyclobis(paraquat-p-phenylene)

The synthesis of several pi-electron-donating monopyrrolotetrathiafulvalene (MPTTF) derivatives, which conceptually can be divided into three classes containing none, one, or two triethylene glycol (TEG) substituents, is described. In all cases, the complexation between the pi-electron donating MPTTF unit and the pi-electron-deficient tetracationic cyclophane cyclobis(paraquat-p-phenylene) (CBPQT(4+)) has been investigated using UV-vis dilution techniques. The results reveal that the strength of the binding between MPTTF derivatives and CBPQT(4+) is directly correlated to the pi-electron donating properties of the MPTTF derivatives. However, the pi-electron-donating properties of the MPTTF derivatives is not the only factor of importance. The results enclosed in the present studies demonstrate that the TEG substituents assist the complexation process most likely on account of their capacity to participate in [C-H...O] hydrogen bonding interactions with some of the alpha-CH protons in the bipyridinium units of CBPQT(4+) and the stabilizing effect that attachment of one or two TEG substituents to the MPTTF unit exerts upon complexation with CBPQT(4+) has been quantified to approximately 0.3 and 0.5 kcal mol-1, respectively. These results serve to lay an extended foundation for the understanding of which buttons to push when it comes to improve the design of bistable molecular switches based on (MP)TTF and CBPQT(4+).     

含偶氮苯基侧基聚硅氧烷的合成及光致变色性

含偶氮苯基侧基聚硅氧烷的合成及光致变色性张其震，张静智，王艳（山东大学化学系济南２５０１００）（山东大学环境科学中心济南２５０１００）关键词聚硅氧烷，光致变色，光异构化，量子产率将光致变色性和液晶性化合物结合可得到新的多功能高分子材料，Ｒｉｎｇｅｄｏ...     

Complexation between pentiptycene derived bis(crown ether)s and CBPQT4+ salt: ion-controlled switchable processes and changeable role of the CBPQT4+ in host-guest systems

The pentiptycene derived bis(crown ether)s with two 24-crown-8 moieties in the cis position could include the CBPQT(4+) ring inside their cavities to form 1:1 complexes, and the naphthalene groups connected in the crown ether moieties showed less effective complexation ability toward the CBPQT(4+) ring than the host containing two terminal benzene rings. This result was probably due to the stereohindrance effect of the naphthalene groups, and it was obviously different from that of the pentiptycene derived mono(crown ether)s. For the pentiptycene derived bis(crown ether) with two 24-crown-8 moieties in the trans position, it formed a 1:2 stable complex with the CBPQT(4+) salt in solution and in the solid state, in which the pentiptycene moiety played an important role in stabilizing the complex. Moreover, binding and release of the CBPQT(4+) ring in the complexes based on the pentiptycene-derived crown ethers could be chemically controlled by adding and removing potassium ions, in which the complexation modes played the key role. Interestingly, it was further found that switching the role of the CBPQT(4+) ring in host and guest systems based on the pentiptycene derived bis(crown ether)s was easily achieved, which represents a new kind of supramolecular system.     

应用扫描电化学显微镜研究电子在室温离子液体与1,2-二氯乙烷混合溶液/水相界面上的转移反应

应用扫描电化学显微镜研究了室温离子液体(Omim·Tf2N)与1,2-二氯乙烷(DCE)混合溶液/水界面上的电子转移反应. 在保持共同离子(Tf2N-)的浓度比恒定及异相电子转移反应由界面电势差所决定的条件下, 研究了离子液体和DCE混合溶液中二茂铁(Fc)与水相中亚铁氰化钾[K4Fe(CN)6]之间异相电子转移反应. 探讨了混合溶液中离子液体的体积分数(xRTIL)的变化对混合溶液/水界面上电子转移反应的影响. 结果表明, 随着xRTIL的减小(从1减小到0.1), Fc在混合溶液中的扩散系数单调递增(从2.730×10-7 cm2·s-1增加到9.131×10-6 cm2·s-1); 而异相电子转移反应速率常数(k)则先逐渐减小(从8.0 mol-1·cm·s-1减小到0.32 mol-1·cm·s-1), 之后又略有增大(从0.32 mol-1·cm·s-1增大到0.48 mol-1·cm·s-1). 对这种现象可能的原因进行了较详细探讨.     

Solution-phase mechanistic study and solid-state structure of a tris(bipyridinium radical cation) inclusion complex

The ability of the diradical dicationic cyclobis(paraquat-p-phenylene) (CBPQT(2(?+))) ring to form inclusion complexes with 1,1'-dialkyl-4,4'-bipyridinium radical cationic (BIPY(?+)) guests has been investigated mechanistically and quantitatively. Two BIPY(?+) radical cations, methyl viologen (MV(?+)) and a dibutynyl derivative (V(?+)), were investigated as guests for the CBPQT(2(?+)) ring. Both guests form trisradical complexes, namely, CBPQT(2(?+))?MV(?+) and CBPQT(2(?+))?V(?+), respectively. The structural details of the CBPQT(2(?+))?MV(?+) complex, which were ascertained by single-crystal X-ray crystallography, reveal that MV(?+) is located inside the cavity of the ring in a centrosymmetric fashion: the 1:1 complexes pack in continuous radical cation stacks. A similar solid-state packing was observed in the case of CBPQT(2(?+)) by itself. Quantum mechanical calculations agree well with the superstructure revealed by X-ray crystallography for CBPQT(2(?+))?MV(?+) and further suggest an electronic asymmetry in the SOMO caused by radical-pairing interactions. The electronic asymmetry is maintained in solution. The thermodynamic stability of the CBPQT(2(?+))?MV(?+) complex was probed by both isothermal titration calorimetry (ITC) and UV/vis spectroscopy, leading to binding constants of (5.0 ± 0.6) × 10(4) M(-1) and (7.9 ± 5.5) × 10(4) M(-1), respectively. The kinetics of association and dissociation were determined by stopped-flow spectroscopy, yielding a k(f) and k(b) of (2.1 ± 0.3) × 10(6) M(-1) s(-1) and 250 ± 50 s(-1), respectively. The electrochemical mechanistic details were studied by variable scan rate cyclic voltammetry (CV), and the experimental data were compared digitally with simulated data, modeled on the proposed mechanism using the thermodynamic and kinetic parameters obtained from ITC, UV/vis, and stopped-flow spectroscopy. In particular, the electrochemical mechanism of association/dissociation involves a bisradical tetracationic intermediate CBPQT((2+)(?+))?V(?+) inclusion complex; in the case of the V(?+) guest, the rate of disassociation (k(b) = 10 ± 2 s(-1)) was slow enough that it could be detected and quantified by variable scan rate CV. All the experimental observations lead to the speculation that the CBPQT((2+)(?+)) ring of the bisradical tetracation complex might possess the unique property of being able to recognize both BIPY(?+) radical cation and π-electron-rich guests simultaneously. The findings reported herein lay the foundation for future studies where this radical-radical recognition motif is harnessed particularly in the context of mechanically interlocked molecules and increases our fundamental understanding of BIPY(?+) radical-radical interactions in solution as well as in the solid-state.     

DPPZ-铜(Ⅱ)-L-氨基酸配合物的电化学性质及SOD活性

应用NBT-光照法研究了配合物[Cu(DPPZ)(L-Val)(H2O)]ClO4.2H2O(1),[Cu(DPPZ)(L-Ile)]ClO4(2),[Cu(DPPZ)(L-Tyr)(H2O)]ClO4.1.5H2O(3)(DPPZ=二吡啶并[3,2-a:2’,3’-c]吩嗪,L-Val=L-缬氨酸,L-Ile=L-异亮氨酸,L-Tyr=L-酪氨酸)在水溶液中的SOD活性,并用循环伏安法研究了配合物的电化学性质.结果表明,三种配合物均具有良好的SOD活性,表观催化速率常数分别为2.27×107,1.46×107和1.23×107mol-1.L.s-1.     

两种四噻吩并萘分子晶体电荷传输性质的理论研究

采用密度泛函理论(DFT)方法结合不相干的电荷跳跃模型和随机Monte Carlo模拟,研究了2种四噻吩并萘晶体(AT1和AT2)的分子结构、电子性质及电荷载流子传输参数,并预测了这2种晶体室温下空穴和电子迁移率的各向异性.结果表明标题化合物具有近似平面的刚性骨架结构,电荷传输过程中分子的结构弛豫相当小.基于绝热势能面法计算的AT1和AT2分子空穴/电子传输内重组能分别为9.300×10~(-2)/1.100×10~(-1)eV和1.020×10~(-1)/1.290×10~(-1) eV,外重组能分别为1.835×10~(-2)/1.711×10~(-2) eV和1.857×10~(-2)/1.747×10~(-2) eV.利用Monte Carlo随机模拟方法预测的2种分子晶体室温(300K)下空穴/电子迁移率平均值分别为4.976×10~(-3)/2.766×10~(-2) cm~2 V~(-1)s~(-1)和3.857×10~(-3)/1.478×10~(-2)cm~2 V~(-1)s~(-1).此外,迁移率的角度依赖性研究表明2种载流子在AT1和AT2晶体aob平面传输时表现出显著的各向异性,其最大值均沿着电荷传输积分最大的方向,为制备高性能场效应晶体管器件提供了参考.