C_(60)二取代化合物与环状二卟啉相互作用研究

通过紫外-可见吸收光谱研究了环状二卟啉与trans-2,trans-3,trans-4和e型4种吡咯烷二取代C60衍生物(bis-C60)异构体之间的弱相互作用。研究表明,吡咯烷取代基团的引入使富勒烯与二卟啉的结合常数按C60单取代C60二取代C60的顺序降低。4种bis-C60与二卟啉的结合常数变化顺序为trans-2trans-3≈trans-4e,表明2个取代基间的相对位置对二取代C60与环状二卟啉间作用有一定影响,分析认为主、客体分子间空间位阻效应的差异是导致这一变化的主要原因。以trans-3 bis-C60/二卟啉复合物为代表,通过密度泛函理论模拟了其几何结构和吸收光谱。     

MoO3-C3N4复合光催化剂的可见光下高效催化降解甲基橙

以钼酸铵和C₃N₄为前驱体,利用浸渍法成功制备了高性能MoO₃-C₃N₄复合光催化剂,利用X射线衍射（XRD）、傅里叶红外（FT-IR）、高分辨电镜（HRTEM）及N₂吸附-脱附曲线等测试手段对所得MoO₃-C₃N₄光催化剂进行了结构和形貌表征。以可见光下光催化降解甲基橙反应表征MoO₃-C₃N₄的光催化活性。实验结果表明,MoO₃-C₃N₄光催化剂具有非常好的光催化降解性能,且MoO₃含量对反应活性产生显著影响。当MoO₃含量为1.6%（w/w）时光催化活性最好,其速率常数达到C₃N₄的50倍。通过研究发现该复合催化剂的高活性来自于其Z型光生载流子传输过程,抑制了光生电子空穴对的复合并延长了引入MoO₃产生的载流子的寿命。     

Ag-Pd/g-C3N4的制备及在水溶液中选择性氧化苯甲醇

采用硼氢化钠还原法在g-C₃N₄的表面负载Ag和Pd纳米颗粒制备Ag/g-C₃N₄、Pd/g-C₃N₄、Ag-Pd/g-C₃N₄光催化剂.采用能谱仪、X射线衍射、高分辨透射电子显微镜等技术对样品进行表征.结果显示,Ag-Pd/g-C₃N₄复合材料中C、N、Ag和Pd元素的质量百分数分别为22.718%、59.966%、9.132%和8.184%.Ag和Pd纳米颗粒负载在g-C₃N₄表面可提高材料在可见光区域的吸收以及提高苯甲醇的转化率,生成苯甲醛的选择性为85.6%.     

基于两个取代四甲基环戊二烯基配体的金属羰基化合物的合成及晶体结构

配体[C₅Me₄HR][R=4-BrPh(1),(MeC₅H₃N)CH₂(2)]分别与Mo(CO)₆,Ru₃(CO)₁₂和Fe(CO)₅在二甲苯中加热回流,得到了6个双核配合物trans-[η⁵-C₅Me₄R]₂Mo₂(CO)₆(3,4),trans-[(η⁵-C₅Me₄R)Ru(CO)(μ-CO)]₂(5,6)和trans-[η⁵-(C₅Me₄R)Fe(CO)(μ-CO)]₂(7,8,).通过元素分析、红外光谱、核磁共振氢谱对配合物的结构进行了表征,并用X-射线单晶衍射法测定了配合物3,5,6和8的结构.     

C60-吡咯烷衍生物的合成及非线性光学性质的研究

通过富勒烯C₆₀与肌氨酸和有机醛化合物的1,3-偶极环加成反应, 获得了九种含不同有机功能基团的C₆₀吡咯烷衍生物1～9, 用¹H NMR, ¹³C NMR, FTIR, UV-vis和FAB-MS进行了结构表征; 利用皮秒激光光源, 采用z扫描技术测定了分子的三阶非线性超极化率γ⁽³⁾, 结果显示: 化合物3 (γ⁽³⁾＝4.14×10^－33 esu)具有最大的三阶非线性光学系数, 说明增加噻吩共轭链的长度, 使三阶非线性活性增加; 对具有相同共轭链的C₆₀-噻吩吡咯烷衍生物(2, 5, 1和4), 吸电子取代基减小了三阶光学非线性活性, 给电子基增大了三阶光学非线性活性; 同时发现喹啉环2-位键联(7)比4-位(8)有更好的三阶光学非线性活性.     

富勒吡咯及其N-氧化物对双卟啉荧光的萃灭研究

本文合成了新型的亚苯基桥连双卟啉化合物（1~4）和富勒吡咯化合物(C₆₀-m, C₆₀-h) 以及它们的N-氧化物(C₆₀-mo, C₆₀-ho)。通过稳态荧光光谱研究了在甲苯溶液中富勒吡咯及其N-氧化物对双卟啉化合物的荧光萃灭作用。通过稳态荧光光谱滴定法测定了双卟啉化合物和富勒烯衍生物之间的荧光萃灭常数并发现：富勒吡咯化合物的荧光萃灭能力随引入富勒烯表面功能基团数目的减少而降低: C₆₀-h>C₆₀-m > C₆₀，并且发现富勒吡咯烷-N-氧化物对双卟啉的荧光萃灭能力比相应的富勒吡咯化合物增长了大约1.3~7.4倍。这些结果都说明通过改变富勒烯表面的功能基团可以调控双卟啉和富勒烯衍生物之间的光电子转移效率。     

含硅铁键环状化合物[Me2Si-η5-C5H4Fe(CO)(PPh3)][Me2Si-η5-C5H4Fe- (CO)2－n(PPh3)n] (n＝0或1)的合成与结构

鉴于含硅-过渡金属键化合物作为催化剂具有重要的应用价值, 在我们最近发现的化合物(η⁵,η⁵-C₅H₄Me₂SiSi-Me₂C₅H₄)Fe₂(CO)₄ (1)的硅硅键和铁铁键复分解重排反应可以有效地合成含有两个硅铁键的环状化合物[Me₂Si-η⁵-C₅H₄- Fe(CO)₂]₂ (2)的基础上, 对该硅铁键环状化合物的三苯基膦取代衍生物[Me₂Si-η⁵-C₅H₄-Fe(CO)(PPh₃)][Me₂Si-η⁵-C₅H₄Fe(CO)_2－n(PPh₃)_n] (3: n＝0, 5: n＝1)的合成方法进行了研究. 发现化合物1在三苯基膦存在下的复分解重排反应是合成单三苯基膦取代产物3的最好方法; 而双三苯基膦取代化合物5则可通过光照条件下2与三苯基膦发生羰基取代反应而得到, 产物中含有的顺反异构体可利用制备薄层色谱法分离. 利用X射线衍射法测定了化合物3的分子结构, 考察了三苯基膦配体的存在对分子结构的影响以及三苯基膦与铁形成的配位键的稳定性.     

g-C3N4/CaTi2O5复合材料制备及其光催化性能

利用类石墨氮化碳（g-C₃N₄）和亚稳相钙钛氧化物（CaTi₂O₅）固相法制备C₃N₄/CaTi₂O₅复合材料。利用X射线衍射（XRD）、金相显微镜、扫描电子显微镜（SEM）及附带能谱分析仪（EDS）和N₂吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计（UV-Vis）测试了样品的光吸收性能,研究C₃N₄与CaTi₂O₅物质的量之比（n_C3N4/nCaTi₂O₅）对C₃N₄/CaTi₂O₅复合样品的物相结构和微观形貌的影响,同时考察C₃N₄/CaTi₂O₅复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明：相比纯C₃N₄和CaTi₂O₅样品,C₃N₄/CaTi₂O₅复合样品在可见光下具有较高的光催化性能,随着n_C3N4/nCaTi₂O₅增加,样品的光催化降解率随之增加而后降低,当n_C3N4/nCaTi₂O₅=1：1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

N-甲基-2-(4''-N-乙基咔唑基)-[60]富勒烯吡咯烷及其衍生物的合成, 电荷分离态特征

通过1,3-偶极环加成方法在微波照射下合成了N-甲基-2-(4'-N-乙基咔唑基)-富勒烯吡咯烷(C₆₀-Cz)和N-甲基-2- (4'-N,N-二苯基氨基)-富勒烯吡咯烷(C₆₀-TPA), 用质谱, ¹H NMR, IR等对其结构进行了表征. 用激光光解时间分辨瞬态谱研究了N-甲基-2-(4'-N-乙基咔唑基)-富勒烯吡咯烷的分子内电荷转移过程, 在近红外区观测到了长寿命电荷分离态C₆₀^•--C_Z^•+的存在, 其寿命为0.28 μs. 运用Gaussian 98量子化学程序包, 利用密度泛函的方法对N-甲基-2-(4'-N,N-二苯基氨基)-富勒烯吡咯烷几何构型进行了优化, 并在优化基础上用ZINDO方法计算了化合物C₆₀-TPA的电子光谱, 计算结果表明, 光谱吸收峰在440 nm, 与实验值433 nm基本一致.     

纳米三氧化二钴低温热容和热力学性质的研究

The isobaric molar heat capacities of nano Co₂O₃ were determined by an adiabatic calorimeter in the temper-ature range from 78 to 350K. No phase transition takes place in this temperature range. The relationship of C_p，m with respect to thermodynamic temperature T was established as C_p，m=-11.998X³-9.6431X²+63.478X+81.291(J·K^-1·mol^-1) ， where X=(T-201.903)/121.535， the correlation coefficient R₂=0.9996. Ac-cording to this relationship and the relationships between thermodynamic functions， the thermodynamic functions of nano Co₂O₃ relative to the standard temperature of 298.15K were derived based on the measured heat capacity data. The average grain size of the studied nano Co₂O₃ sample was determined to be 12nm by TEM.     

Li_(1.3)Ti_(1.7)Al_(0.3)(PO_4)_3,Na_(1.3)Ti_(1.7)Al_(0.3)(PO_4)_3的离子交换研究

研究了在不同温度下的NaNO3和AgNO3水溶液中Li1.3Ti1.7Al0.3(PO4)3和Na1.3Ti1.7Al0.3(PO4)3离子交换行为.实验表明Li1.3Ti1.7Al0.3(PO4)3和Na1.3Ti1.7Al0.3(PO4)3均显示出了高选择性与Na+和Ag+进行离子交换的特征,且对Ag+的选择性高于Na+.升高温度可显著提高Ag/Li和Ag/Na的交换反应速度.     

Crystal growth, structure determination, and optical properties of new potassium-rare-earth silicates K3RESi2O7 (RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu)

Single crystals of K₃RESi₂O₇ (RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) were grown from a potassium fluoride flux. Two different structure types were found for this series. Silicates containing the larger rare earths, RE=Gd, Tb, Dy, Ho, Er, Tm, Yb crystallize in a structure K₃RESi₂O₇ that contains the rare-earth cation in both a slightly distorted octahedral and an ideal trigonal prismatic coordination environment, while in K₃LuSi₂O₇, containing the smallest of the rare earths, lutetium is found solely in an octahedral coordination environment. The structure of K₃LuSi₂O₇ crystallizes in space group P6₃/mmc with a=5.71160(10) Å and c=13.8883(6) Å. The structures containing the remaining rare earths crystallize in the space group P6₃/mcm with the lattice parameters of a=9.9359(2) Å, c=14.4295(4) Å, (K₃GdSi₂O₇); a=9.88730(10) Å, c=14.3856(3) Å, (K₃TbSi₂O₇); a=9.8673(2) Å, c=14.3572(4) Å, (K₃DySi₂O₇); a=9.8408(3) Å, c=14.3206(6) Å, (K₃HoSi₂O₇); a=9.82120(10) Å, c=14.2986(2) Å, (K₃ErSi₂O₇); a=9.80200(10) Å, c=14.2863(4) Å, (K₃TmSi₂O₇); a=9.78190(10) Å, c=14.2401(3) Å, (K₃YbSi₂O₇). The optical properties of the silicates were investigated and K₃TbSi₂O₇ was found to fluoresce in the visible.     

B2O3-Bi2O3-ZnO-Al2O3玻璃助烧剂对BaTiO3陶瓷烧结条件、晶体结构和介电性能的影响

通过调节B₂O₃-Bi₂O₃-ZnO-Al₂O₃(BBZA)玻璃的添加量研究其对钛酸钡(BaTiO₃)陶瓷烧结条件、晶体结构和介电性能的影响。结果表明：添加适量的BBZA玻璃能够有效地将BaTiO₃陶瓷烧结温度由1 350℃降至950℃,并使其致密化。同时,添加BBZA玻璃后,BaTiO₃的晶体结构随着烧结温度的升高而发生转变(立方相→四方相)。另外,BBZA玻璃的引入使BaTiO₃陶瓷的居里峰得到了有效的抑制和拓宽。陶瓷微观形貌显示,玻璃相均匀分布在BaTiO₃晶粒表面。优化的BaTiO₃陶瓷制备条件如下：BBZA添加量(质量分数)为2.0%,烧结温度为950℃。在该条件下制备的BaTiO₃陶瓷介电常数达到1 364,介电损耗低至1.2%。     

Near infrared study of aqueous rare-earth ethylsulfates

The near infrared spectra of aqueous solutions of the ethylsulfates of La, Nd, Gd, Tb, Er, Yb, Lu, Y, and Na have been determined from about 0.2 mol-dm^–3 to nearly saturation. The extinction coefficients of water have been calculated taking into account the absorption of ethylslfate anions determined in separate experiments. Their values appeared to be nearly the same as that of pure water. The relative contents of free OH groups in 0.5 and 0.7M solutions have been estimated from the absorbances at 1160 nm. They were lower in solutions of the heavy rare-earth ethylsulfates (Tb, Er, Yb, Lu) than in equimolar solutions of the lighter ones (La, Nd), confirming our previous view that secondary hydration of the heavy trivalent rare-earth cations is distinctly stronger than that of the lighter ones. A comparison of the spectra of these aqueous ethylsulfates with those of perchlorates shows that the structure-breaking ability of the C₂H₅SO ₄ ^– ion is much smaller than that of perchlorate anion.     

电感耦合等离子体光谱法(ICP-AES)测定银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量

针对银精矿样品复杂,难消解的特点,研究了不同酸溶法和碱熔法对样品的消解情况,建立了硝酸,盐酸,氢氟酸,高氯酸消解银精矿的方法。根据元素灵敏度和抗干扰性,选定各元素的测定波长。通过酸溶样和碱熔样测定结果比对,验证了方法准确性。建立了四酸消解-电感耦合等离子体光谱法测定银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量的方法,元素的线性相关系数均在0.9999以上。通过共存元素干扰实验,确定了银精矿中高含量元素(铜、铅、锌、铁、锑、铋等)对测定元素结果没有影响。方法检出限：Cu 0.0063 mg/L, Pb 0.0159 mg/L ,Zn 0.0090 mg/L,As 0.0192 mg/L, Cd 0.0093 mg/L ,Ca 0.0084 mg/L, Mg 0.0075 mg/L, Mn 0.0081 mg/L。测定下限：Cu 0.0105mg/L,Pb 0.0265 mg/L, Zn 0.0150 mg/L, As 0.0320 mg/L, Cd 0.0155 mg/L, Ca 0.0140 mg/L, Mg 0.0125 mg/L,Mn 0.0135 mg/L。3个样品的相对标准偏差在0.87%~3.56%之间,加标回收率在95.00%~103.56%之间。方法流程短,操作简单,快速,灵敏度和再现性高,结果准确可靠,可以满足银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量的测定。     

Structural studies of five layer Aurivillius oxides: A2Bi4Ti5O18 (A=Ca, Sr, Ba and Pb)

The room temperature structures of the five layer Aurivillius phases A₂Bi₄Ti₅O₁₈ (A=Ca, Sr, Ba and Pb) have been refined from powder neutron diffraction data using the Rietveld method. The structures consist of [Bi₂O₂]²⁺ layers interleaved with perovskite-like [A₂Bi₂Ti₅O₁₆]²⁻ blocks. The structures were refined in the orthorhombic space group B2eb (SG. No. 41), Z=4, and the unit cell parameters of the oxides are a=5.4251(2), b=5.4034(1), c=48.486(1); a=5.4650(2), b=5.4625(3), c=48.852(1); a=5.4988(3), b=5.4980(4), c=50.352(1); a=5.4701(2), b=5.4577(2), c=49.643(1) for A=Ca, Sr, Ba and Pb, respectively. The structural features of the compounds were found similar to n=2-4 layers bismuth oxides. The strain caused by mismatch of cell parameter requirements for the [Bi₂O₂]²⁺ layers and perovskite-like [A₂Bi₂Ti₅O₁₆]²⁻ blocks were relieved by tilting of the TiO₆ octahedra. Variable temperature synchrotron X-ray studies for Ca and Pb compounds showed that the orthorhombic structure persisted up to 675 and 475 K, respectively. Raman spectra of the compounds are also presented.     

Metal-organic deposition of YBa2Cu3Ox and Bi2Sr2Ca1Cu2Ox films on various substrates starting from different fluorine-free metallorganic compounds

YBa₂Cu₃O_x (Y-123) and Bi₂Sr₂Ca₁Cu₂O_x (Bi-2212) films on various substrates have been prepared by Metal-Organic Deposition starting from different metallorganic fluorine-free compounds and using a very simple instrumentation. The processing conditions include a rapid pyrolysis step in air and an annealing step in oxygen for Y-123 and in air for Bi-2212. The films obtained have been characterized by X-ray diffraction (XRD) and the formation of a superconducting phase of Y-123 or Bi-2212 was confirmed measuring the critical temperature (T _c) with Ac-susceptibility and resistive measurements. Microstructure and final cationic ratios have been studied by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS).     

Decomposition of P2S2N4(Si(CH3)3)4A12C14 as Studied by FT-Raman and Quantum Chemistry Means

The dimeric title compound decomposes upon heating to give the monomer and desulphurized monomer as shown by FT-Raman and quantum chemical means.     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

The crystal chemistry of Bi6TP2O15+x, T=Fe, Ni, Zn: Isomorphism and polymorphism, structural relationship to Bi6TiP2O16

The crystal structures of compounds with nominal compositions Bi₆FeP₂O_15+x (I), Bi₆NiP₂O_15+x (II) and Bi₆ZnP₂O_15+x (III) were determined from single-crystal X-ray diffraction data. They are monoclinic, space group I2, Z=2. The lattice parameters for (I) are a=11.2644(7), b=5.4380(3), c=11.1440(5) Å, β=96.154(4)°; for (II) a=11.259(7), b=5.461(4), c=11.109(7) Å, β=96.65(1)°; for (III) a=19.7271(5), b=5.4376(2), c=16.9730(6) Å, β=131.932(1)°. Least squares refinements on F² converged for (I) to R1=0.0554, wR₂=0.1408; for (II) R₁=0.0647, wR₂=0.1697; for (III) R₁=0.0385, wR₂=0.1023. The crystals are complexly twinned by 2-fold rotation about , by inversion and by mirror reflection. The structures consist of edge-sharing articulations of OBi₄ tetrahedra forming layers in the a-c plane that then continue by edge-sharing parallel to the b-axis. The three-dimensional networks are bridged by Fe and Ni octahedra in (I) and (II) and by Zn trigonal bipyramids in (III) as well as by oxygen atoms of the PO₄ moieties. Bi also randomly occupies the octahedral sites. Oxygen vacancies exist in the structures of the three compounds due to required charge balances and they occur in the octahedral coordination polyhedron of the transition metal. In compound (III), no positional disorder in atomic sites is present. The Bi-O coordination polyhedra are trigonal prisms with one, two or three faces capped. Magnetic susceptibility data for compound (I) were obtained between 4.2 and 350 K. Between 4.2 and 250 K it is paramagnetic, μ_eff=6.1 μ_B; a magnetic transition occurs above 250 K.