Li1.3Ti1.7Al0.3(PO4)3与Na+的离子交换

锂离子传导材料Li_1.3Ti_1.7Al_0.3(PO₄)₃是具有NASICON结构的功能材料, 与Na⁺进行离子交换具有选择性高的特性. 研究了在不同温度条件下NaCl和LiCl水溶液中Li_1.3Ti_1.7Al_0.3(PO₄)₃上的Na/Li离子交换行为. 实验结果表明, 升高温度能显著提高Li_1.3Ti_1.7Al_0.3(PO₄)₃的Na/Li交换反应速率, 提高LiCl中杂质Na的分离效果.     

LiZr4(PO4)3的Na/Li及Ag/Li离子交换

研究了LiZr2(PO4)3在水溶液中的Na/Li和Ag/Li离子交换行为.结果表明,LiZr2(PO4)3对Na+和Ag+离子均具有很高的选择性,且对Ag+的选择性高于Na+.LiZr2(PO4)3与Ag+的离子交换反应是通过形成固溶体的形式进行的,而与Na+的离子交换反应则是通过置换进行的.温度升高有利于提高LiZr2(PO4)3上Na/Li和Ag/Li的离子交换反应速度.     

快离子导体Li3V2(PO4)3包覆LiFePO4的结构和性能

通过机械活化将快离子导体Li3 V2(PO4)3包覆在LiFePO4 表面, 制备了性能优异的复合正极材料9LiFePO4@Li3 V2(PO4)3. 用XRD, SEM, HRTEM, EDS和电化学测试等手段研究了材料的物理化学性能. 结果表明, 包覆后的材料含有橄榄石结构的LiFePO4、单斜晶系的Li3 V2(PO4)3 和正交晶系的Li3 PO4; LiFePO4颗粒表面包覆了一层Li3 V2(PO4)3, 且部分V3+进入LiFePO4晶格内部, 使其晶格参数减小, 包覆后的LiFePO4的交换电流密度和锂离子扩散系数均提高了1个数量级. 电化学测试结果表明, 包覆后的LiFePO4的倍率性能及循环性能都得到显著改善, 在1C和2C倍率下, 包覆后的LiFePO4的首次放电比容量较包覆前分别提高了34.09%和78.97%, 经150次循环后容量保持率分别提高了27.77%和65.54%; 并且5C时容量为121.379 mA·h/g(包覆前LiFePO4在5C下几乎没有容量), 循环350次后的容量保持率高达94.03%.     

Li2Mg2Si4O10F2、H2Mn8O16·1.4H2O和Li1.3Ti1.7Al0.3(PO4)3在高浓度LiCl水溶液中的离子交换行为

研究了用功能材料 Li2Mg2Si4O10F2(LHT)、 H2Mn8O16@ 1.4H2O(CRYMO)和 Li1.3Ti1.7Al0.3(PO4)3(LTAP)分别去除高浓度氯化锂水溶液中的杂质 Fe3+、 K+和 Na+ .实验结果表明,这几种功能材料分别对溶液中的杂质 Fe3+、 K+和 Na+有很高的选择性,除杂效果明显 .分析和研究了这几种功能材料在高浓度氯化锂水溶液中分别与 Fe3+、 K+和 Na+的交换行为 .结果表明,在高浓度氯化锂溶液中这几种功能材料与杂质交换的动力学行为可近似用 JMAK方程描述.     

离子交换法合成纳米级锂离子电池负极材料Li_4Ti_5O_(12)

用钛酸纳米管和LiOH溶液进行离子交换法得到了水合钛酸锂前驱体,进而在不同温度热处理制备了Li4Ti5O12。通过X射线衍射(XRD)、扫描电镜(SEM)、热分析(TG-DSC)和恒电流充放电测试对反应产物进行了研究。结果表明所得前驱体在500～700℃热处理可得到纳米结构的纯相Li4Ti5O12。所得Li4Ti5O12的可逆容量约为160mAh·g-1,循环稳定性随热处理温度的提高而增强,并因具有较短的锂离子扩散距离表现出极佳的倍率性能,在1600mA·g-1(约10C)的电流密度下放电下还保持140mAh·g-1的容量。     

溶胶-凝胶法制备Li3V2(PO4)3及其性能研究

0引言具有类NASICON结构的Li3V2(PO4)3是继过渡金属氧化物LMO后的一种新型的锂离子二次电池正极材料。与目前市场上应用最为广泛的正极材料LiCoO2相比,Li3V2(PO4)3具有超常的稳定性,即使在脱出的Li 与过渡金属原子的物质的量之比大于1的时候仍然具有超乎寻常的稳定性,而通常情况下1mol LiCoO2在脱出0.5mol Li 就会变得不稳定。并且Co是一种战略物资,全球储量十分有限;Co也是一种有毒金属,对于环境污染较为严重。LiNiO2因其合成较为困难而使应用受限,尖晶石LiMn2O4虽然属于环境友好型化合物,但其理论比容量仅为148mAh·g-1,且…     

Ag3PO4/Ag2S/g-C3N4复合光催化剂的制备与性能

通过沉积法和离子交换法成功地制备了Ag_3PO_4/Ag_2S/g-C_3N_4复合型光催化剂。利用X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、N_2吸附-脱附等温线、紫外-可见漫反射光谱、荧光光谱等手段对样品进行了表征。通过降解罗丹明B考察其可见光催化活性及稳定性,研究了硫化钠与磷酸银物质的量的比值(n_(Na_2S)/n_(Ag_3PO_4))、g-C_3N_4添加量对所制备复合光催化材料性能的影响,同时对光催化机理进行了探讨。结果表明,随着n_(Na2S)/n_(Ag3PO4)的增加,所得复合催化材料活性先增加后降低;当n_(Na2S)/n_(Ag_3PO_4)为1.5%、g-C_3N_4与Ag_3PO_4的质量比为3∶7时制备的催化剂ASC1.5的光催化活性最好,在可见光照射下,40 min内可将罗丹明B完全降解,且5次循环使用后仍保持较高的催化活性。和Ag_3PO_4相比,Ag_3PO_4/Ag_2S/g-C_3N_4复合型光催化材料的活性与稳定性都得到明显提高,这主要归因于复合催化剂比表面积和孔结构的增加,载流子分离效率的提高。光催化机理研究表明,空穴(h~+)、超氧阴离子自由基(·O~(2-))和羟基自由基(·OH)都是光催化过程中的主要活性物种。三者作用大小依次为:h~+·O~(2-)·OH。     

Li2Mg2Si4O10F2、H2Mn8O16•1.4H2O和Li1.3Ti1.7Al0.3(PO4)3在高浓度LiCl水溶液中的离子交换行为

研究了用功能材料Li2Mg2Si4O10F2 (LHT)、H2Mn8O16•1.4H2O (CRYMO)和Li1.3Ti1.7Al0.3(PO4)3 (LTAP)分别去除高浓度氯化锂水溶液中的杂质Fe3＋、K＋和Na＋.实验结果表明，这几种功能材料分别对溶液中的杂质Fe3＋、K＋和Na＋有很高的选择性，除杂效果明显.分析和研究了这几种功能材料在高浓度氯化锂水溶液中分别与Fe3＋、K＋和Na＋的交换行为.结果表明，在高浓度氯化锂溶液中这几种功能材料与杂质交换的动力学行为可近似用JMAK方程描述.     

La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)/Tb~(3+)荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为5D0→7F2特征能级跃迁,Eu~(3+)的最优掺杂浓度为0.08,对应的CIE坐标为(0.610 2,0.382 3);La_7O_6(BO_3)(PO_4)_2∶Tb~(3+)材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb~(3+)的5D4→7F5能级跃迁,Tb~(3+)离子的最优掺杂浓度为0.15,对应的CIE坐标为(0.317 7,0.535 2)。此外,对2种材料的变温光谱分析发现Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2荧光材料均具有良好的热稳定性。     

一维纳米Co_3O_4,Ag/Co_3O_4及CuO/Co_3O_4的合成与电催化性能(英文)

采用水热合成法制备了Co3O4及复合Ag/Co3O4、CuO/Co3O4一维纳米产品。用XRD,FE-SEM和TEM手段对产品进行了表征。采用循环伏安法研究了合成产品修饰的玻碳电极在碱性溶液中对对硝基苯酚的电催化还原性能。与裸玻碳电极相比,1mmol·L-1的对硝基苯酚在用Co3O4、特别是CuO/Co3O4修饰的玻碳电极上还原的峰电流明显增大,用Ag/Co3O4(Ag/Co原子比分别为1∶5和2∶5)修饰的玻碳电极催化还原对硝基苯酚时,尽管还原峰电流增大不是太大,但其峰电位明显降低(分别降低0.265和0.371V)。     

Li_4Ti_5O_(12)/(Ag+C)极材料的固相合成及电化学性能

以Li_2CO_3,TiO_2为原料,葡萄糖为碳源,采用固相煅烧工艺合成了亚微米级的Li_4Ti_5O_(12)/C复合负极材料.并将之与AgNO_3复合,采用固相方法制备出了Ag表面修饰的Li_4Ti_5O_(12)(AG+C)复合材料.采用XRD、SEM和TEM测试方法对材料的微结构进行了表征.结果表明,C的存在对Ag单质在Li_4Ti_5O_(12)/C颗粒表面的大量形成起到了积极的促进作用.从而很大程度地提高了Li_4Ti_5O_(12)/C的电导率,因此有效地改善了其电化学性能.在1C倍率下,Li_4Ti_5O_(12)/(Ag+C)复合材料的首次放电容量达到了164 mAh·g(-1).     

Surface-engineering enhanced sodium storage performance of Na_3V_2(PO_4)_3 cathode via in-situ self-decorated conducting polymer route

The key to the development of sodium ion battery is materials with a high rate capacity and cycle stability. Conducting coating is an efficient approach to improve electrochemical performance. As a case study, the Na_3V_2(PO_4)_3@PEDOT composite was prepared through an in-situ self-decorated conducting polymer route without further calcination. The Na_3V_2(PO_4)_3 electrode with a 7%poly(3,4-ethylenedioxythiophene)(PEDOT) coating can deliver an initial reversible capacity of 100 mA h g~(-1) at 1 cycle, and 82%capacity retention over 200 cycles. The results also show that the Na_3V_2(PO_4)_3 electrode without and with a thick PEDOT coating exhibits poor electrochemical performance, indicating that an appropriate coating layer is important for improving electronic conductivity and regulating Na-ion insertion. Therefore, this work offers possibility to promote the electrochemical performance of poor-conducting materials in sodium-ion batteries using an in-situ self-decorated conducting polymer.     

Li1.3Zr1.7Al0.3(PO4)3的离子交换特性

锂作为21世纪推动科学技术发展的重要元素之一,被誉为“工业味精”、“能源之星”。目前锂及其相关盐类材料已成为信息产业、核能源、航空航天技术、新型材料及军事科技等行业重点开发领域,具有极高科学价值和广阔商业前景[1￣4]。氯化锂是电解制金属锂的主要原料,它的纯度是电     

Ultrahigh rate binder-free Na_3V_2(PO_4)_3/carbon cathode for sodium-ion battery

Sodium ion batteries(SIBs)are very promising for large-scale energy storage in virtue of its high energy density,abundant sodium resources and low environmental impact,etc.However,it is still a big challenge to develop high-performance and durable cathode materials for SIBs.Among different candidate materials,Na_3V_2(PO_4)_3has attracted great attentions due to its high theoretical capacity(117 mAh/g),stable framework structure and excellent ionic conductivity.However,Na_3V_2(PO_4)_3delivers inferior rate capability and cycling stability due to its poor electronic conductivity.In this work,free-standing Na_3V_2(PO_4)_3/carbon nanofiber membranes are synthesized by an electrospinning-sintering route.The sample could deliver excellent cycling capability with specific capacity of 112 mAh/g at 1 C after 250cycles and ultrahigh rate capability with 76.9 mAh/g even at 100 C,which is superior to many state-ofthe-art SIB cathode materials.This can be attributed to the hierarchically distributed Na_3V_2(PO_4)_3crystals in carbon nanofiber network,which possesses outstanding electronic/ionic conductivity and thus leads to an ultrahigh rate capability.     

Carbon decorated Li_3V_2(PO_4)_3 for high-rate lithium-ion batteries:Electrochemical performance and charge compensation mechanism

Fast charging and high-power delivering batteries are highly demanded in mobile electronics,electric vehicles and grid energy storage,but there are full of challenges.The star-material Li₃V₂(PO₄)₃ is demonstrated as a promising high-rate cathode material meeting the above requirements.Herein,we report the carbon decorated Li₃V₂(PO₄)₃ (LVP/C) cathode prepared via a facile method,which displays a remarkable high-rate capability and long-term cycling performance.Briefly,the prepared LVP/C delivers a high discharge capacity of 122 mAh g^-1(-93% of the theoretical capacity) at a high rate up to 20 C and a superior capacity retention of 87.1% after 1000 cycles.Importantly,by applying a combination of X-ray absorption spectroscopy and full-range mapping of resonant inelastic X-ray scattering,we clearly elucidate the structural and chemical evolutions of LVP upon various potentials and cycle numbers.We show unambiguous spectroscopic evidences that the evolution of the hybridization strength between V and O in LVP/C as a consequence of lithiation/delithiation is highly reversible both in the bulk and on the surface during the discharge-charge processes even over extended cycles,which should be responsible for the remarkable electrochemical performance of LVP/C.Our present study provides not only an effective synthesis strategy but also deeper insights into the surface and bulk electrochemical reaction mechanism of LVP,which should be beneficial for the further design of high-performance LVP electrode materials.     

Li1.3Al0.3Ti1.7(PO4)3 filler effect on (PEO)LiClO4 solid polymer electrolyte

Composite polymer electrolyte (CPE) films consisting of PEO, LiClO₄, and Li_1.3Al_0.3Ti_1.7(PO₄)₃ with fixed EO/Li = 8 but different relative compositions of the two lithium salts were prepared by the solution casting method. The CPE films were characterized using SEM, DSC, electrical impedance spectroscopy (EIS), and ion transference number measurement. It was found that the incorporation of LiClO₄ and Li_1.3Al_0.3Ti_1.7(PO₄)₃ into PEO by keeping EO/Li = 8 reduced the crystallinity of PEO from 50.34% to the range of 3.57–15.63% depending upon the relative composition of the two salts. The room temperature impedance spectra of the CPE films all exhibited a shape of depressed semicircle in the high frequency range and inclined line in the low frequency range, but the high temperature ones were mainly inclined lines. The Li⁺ ionic conductivity of the CPE films mildly increased and then decreased with increasing Li_1.3Al_0.3Ti_1.7(PO₄)₃ content, and the maximum conductivities were obtained at Li_1.3Al_0.3Ti_1.7(PO₄)₃ content of 15 wt % for all measuring temperatures, for example, 1.378 × 10^?3 S/cm at 100 °C and 1.387 × 10^?5 S/cm at 25 °C. The temperature dependence of the ionic conductivity of the CPE films follows the Vogel–Tamman–Fulcher (VTF) equation The pseudo activation energies (E_a) were rather low, 0.053–0.062 eV, indicating an easy migration of Li⁺ in the amorphous phase dominant PEO. The pre‐exponent constant A and ion transference number t_Li+ were found to have a similar variation tendency with increasing Li_1.3Al_0.3Ti_1.7(PO₄)₃ content and reached their maximums also at Li_1.3Al_0.3Ti_1.7(PO₄)₃ content of 15 wt %. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 743–751, 2005     

SiO44-对Li3Sc2(PO4)3快离子导体的阴离子替代效果研究

Li3Sc2(PO4)3因具有有利的离子传导通道、低的电子电导率和高的稳定性而成为全固态锂离子电池用固体电解质最具竞争力的材料之一,然而这一化合物只有在245℃以上的γ相才具有快离子传导特性。人们主要采用Zr4+、Ti4+等阳离子部分取代其中的Sc3+以改善材料的室温电导率,有关该化合物PO43-阴离子替代的报道还很少。本研究试图利用机械研磨技术,通过向Li3Sc2(PO4)3原料混合物中加入适量SiO2,以期能够实现对该化合物的部分阴离子替代。研究结果表明:所制备的Li3+xSc2(PO4)3-x(SiO4)x(x=0~0.6)系列化合物在x=0.15时电导率达到最大值,σ298=9.55×10-4 S.m-1,离子传导激活能达到最小值45.06 kJ.mol-1。29Si MAS-NMR测试结果证实所加入的SiO2主要以[SiO4]四面体形式存在替代Li3Sc2(PO4)3中部分[PO4]四面体。     

M5(PO4)3F (M=Ca, Sr, Ba)中Sm3+的电荷迁移态及Sm3+和Eu3+的电荷迁移能量关系

采用高温固相反应合成了M_5-2xSm_xNa_x(PO₄)₃F(M=Ca,Sr,Ba)荧光体,研究了其在真空紫外-可见光范围的发光特性。发现在Ca₅(PO₄)₃F中Sm³⁺的电荷迁移带约在191 nm,在Sr₅(PO₄)₃F中约在199 nm,而在Ba₅(PO₄)₃F中约在204 nm,随着被取代碱土离子半径的增大电荷迁移能量逐渐减小。比较了M₅(PO₄)₃F (M=Ca,Sr,Ba)中Sm³⁺和Eu³⁺电荷迁移能量的关系。