Nanostructured polymetallaynes of controlled length: Synthesis and characterization of oligomers and polymers from 1,1′‐bis‐(ethynyl)4,4′‐biphenyl bridging Pt(II) or Pd(II) centers

The reactivity of square planar palladium(II) and platinum(II) complexes in trans or cis configuration, namely trans or cis‐[dichlorobis(tributylphosphine)platinum(II)] and trans‐[dichlorobis(tributylphosphine)palladium(II)] with 1,1′‐bis(ethynyl) 4,4′‐biphenyl, DEBP, leading to π‐conjugated organometallic oligomeric and polymeric metallaynes, was investigated by a systematic variation of the reaction conditions. The formation of polymers and oligomers with defined chain length [? M(PBu₃)₂ (C?C? C₆H₄? C₆H₄? C?C? )]_n (n = 3–10 for the oligomers, n = 20–50 for the polymers) depends on the configuration of the precursor Pt(II) and Pd(II) complexes, the presence/absence of the catalyst CuI, and the reaction time. A series of model reactions monitored by XPS, GPC, and NMR ³¹P spectroscopy showed the route to modulate the chain growth. As expected, the nature of the transition metal (Pt or Pd) and the molecular weight of the polymers markedly influence the photophysical characteristics of the polymetallaynes, such as optical absorption and emission behavior. Polymetallaynes with nanostructured morphology could be obtained by a simple casting procedure of polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3311–3329, 2007     

Modification of surface properties of electrospun polyamide nanofibers by means of a perfluorinated acridine

Polyamide 6 (PA6) nanofibers were prepared from formic acid solutions by using electrospinning technique. The fibers were smooth, defects free and with diameters smaller than 200 nm. Small amounts of a perfluorinated acridine were added as dopant to the feed solution to modify the wettability of the fibers. The effect of doping on the contact angle values is well apparent. The contact angle values go from 50° of pure PA6 to 120° when 6% of acridine is added. A comparison between fibers and films of pure and doped polyamide 6 was carried out in order to determine the effect of morphology on wettability. Thermal annealing near the T_g of the polymer promoted the segregation of the molecules to the surface, reaching contact angles of 131° with smaller amounts (4%) of acridine. The surface segregation was also promoted by time aging.     

Synthesis and spectroscopic properties of highly water-soluble perylene derivatives

Most known perylene diimides are lipophilic, with few exceptions of hydrophilic derivatives. Even in the latter case, the compounds have limited water solubility and show a strong tendency to self-aggregation. In this paper we present the synthesis of four new perylene derivatives with three and four basic side chains, obtained by functionalizing the bay-area of perylene. These molecules show great solubility in aqueous media as hydrochlorides and their tendency to self-aggregate is remarkably reduced with respect to the previously synthesized two-chained perylene diimides. Their different spectroscopic properties in various solvents and conditions are reported and discussed.     

A Formal Total Synthesis of (+)-Methyl Trachyloban-18-oate and (+)-Methyl 16-Oxo-17-norkauran-18-oate: Regio- and Diastereoselective Preparation of Methyl (13S)-13-Hydroxyisoatisiren-18-oate from (−)-Abietic Acid

A novel preparation of methyl (13S)-13-hydroxyisoatisiren-18-oate ( 4 ), a key-intermediate in a synthesis of (+)-methyl trachyloban-18-oate ((+)- 1 ), from (?)-abietic acid, is described. Since (?)- 1 has been previously converted into (?)-methyl 16-oxo-17-norkauran-18-oate ((?)- 16 ), our preparation of 4 constitutes also a formal total synthesis, from (?)-abietic acid, of (+)- 16 . Key steps in this approach were the allene photoaddition to podocarp-8(14)-en-13-one ( 5 ) and the conversion of the endo-toluene-4-sulfonate 11 into the exo-benzoate 12b .     

High-performance liquid chromatography with post-column derivatisation and fluorescence detection for sensitive determination of aflatoxin M1 in milk and cheese

A new HPLC method with fluorescence detection using pyridinium hydrobromide perbromide as a post-column derivatising agent has been developed to determine aflatoxin M1 in milk and cheese. The detection limits were 1 ng/kg for milk and 5 ng/kg for cheese. The calibration curve was linear from 0.001 to 0.1 ng injected. The method includes a preliminary C18-SPE clean-up and the average recoveries of Aflatoxin M1 from milk and cheese, spiked at levels of 25-75 ng/kg and 100-300 ng/kg, respectively, were 90 and 76%; the precision (RSDr) ranged from 1.7 to 2.6% for milk and from 3.5 to 6.5% for cheese. The method is rapid, easily automatable and therefore useful for accurate and precise screening of aflatoxin M1 in milk and cheese.     

2-(2-Hydroxyaryl)cinnamic amides: a new class of axially chiral molecules

The syntheses of several differently substituted amides formally derived from a chiral amine, either E-2-(2-hydroxyphenyl)cinnamic acid or both E- and Z-2-(2-hydroxynaphthyl)cinnamic acid, are reported. These molecules display a restricted rotation about the C₂-C_aryl bond. The barriers to rotation about the C₂-C_aryl bond were measured by the dynamic ¹H NMR and were found to vary between 11.8 and 24.5 kcal mol⁻¹, depending on the substitution. In particular, E-2-(2-hydroxynapthyl)cinnamic amides, displayed a high barrier to rotation (ΔG_c^‡=24.4 kcal mol⁻¹) and could be isolated in both diastereomerically pure forms at room temperature. The X-ray structure of one E-2-(2-hydroxynapthyl)cinnamic amide, was resolved, enabling for the determination of the absolute configuration of the chiral axis (aR).     

Synthesis of 4H-3,1-benzoxazines, quinazolin-2-ones, and quinoline-4-ones by palladium-catalyzed oxidative carbonylation of 2-ethynylaniline derivatives

An effective and straightforward approach to the synthesis of 4H-3,1-benzoxazines 3 and 4, quinazolin-2-ones 5, and quinoline-4-one derivatives 6 and 7 is provided by palladium-catalyzed cyclization-alkoxycarbonylation of variously substituted 2-(trimethylsilanyl)ethynylaniline amide or urea derivatives 2. Reactions are carried out in 7:1 MeCN/MeOH at 65 or 75 degrees C in the presence of catalytic amounts of 10% Pd/C in conjunction with Bu(4)NI and KF and under 2.4 MPa of a 3:1 mixture of CO and air. Anti and syn 6-exo-dig cyclization modes account for the formation of the two stereoisomers. Isomerization of the vinylpalladium intermediate may occur as well. Formation of a double carbonylation product 7r and of a gem-dimethoxycarbonylation product 6s, whose structures have been determined by X-ray diffraction analysis, is justified through an unusual type of rearrangement.     

Olive mill wastewater treatment by a pilot-scale subsurface horizontal flow (SSF-h) constructed wetland

Performances of a pilot-scale reed bed for the olive mill wastewater (OMW) treatment were investigated, by monitoring influent and effluent pH, total suspended solids (TSS), chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN), total phosphorus and polyphenols. In order to reduce the suspended matter concentration and to avoid clogging, OMW was pre-treated by adding lime putty, calcium hydroxide and hydraulic lime. The best results were obtained with 2 g/L of hydraulic lime. Pre-treated OMW was dosed in the reed bed at dilution ratios of 1/3 and 1/10 (v/v), pointing up that the latter only did not give rise to reed suffering and allowed to obtain good and durable removal efficiencies, above all for COD (74.1+/-17.6%) and polyphenols (83.4+/-17.8%). Recycling of the effluent was quite effective for the improvement of the wastewater quality, allowing a further removal of 26-70%, depending on the parameter taken into account. A post-dosage study, carried out by feeding the reed bed with the effluent of an activated sludge plant, pointed up a rapid decreasing of the outlet concentrations of the investigated parameters to values compatible with Italian regulations concerning wastewater discharge in surface water. Polyphenols were the exception, being their outlet concentration at the end of post-dosage study around 2 mg/L.